“Dual‐Template” Synthesis of One‐Dimensional Conductive Nanoparticle Superstructures from Coordination Metal–Peptide Polymer Crystals

Bottom‐up fabrication of self‐assembled structures made of nanoparticles may lead to new materials, arrays and devices with great promise for myriad applications. Here a new class of metal–peptide scaffolds is reported: coordination polymer Ag(I)‐DLL belt‐like crystals, which enable the dual‐template synthesis of more sophisticated nanoparticle superstructures. In these biorelated scaffolds, the self‐assembly and recognition capacities of peptides and the selective reduction of Ag(I) ions to Ag are simultaneously exploited to control the growth and assembly of inorganic nanoparticles: first on their surfaces, and then inside the structures themselves. The templated internal Ag nanoparticles are well confined and closely packed, conditions that favour electrical conductivity in the superstructures. It is anticipated that these Ag(I)‐DLL belts could be applied to create long (>100 μm) conductive Ag@Ag nanoparticle superstructures and polymetallic, multifunctional Fe₃O₄@Ag nanoparticle composites that marry the magnetic and conductive properties of the two nanoparticle types.     

Self‐Assembled Peptide‐Based Nanomaterials for Biomedical Imaging and Therapy

Peptide‐based materials are one of the most important biomaterials, with diverse structures and functionalities. Over the past few decades, a self‐assembly strategy is introduced to construct peptide‐based nanomaterials, which can form well‐controlled superstructures with high stability and multivalent effect. More recently, peptide‐based functional biomaterials are widely utilized in clinical applications. However, there is no comprehensive review article that summarizes this growing area, from fundamental research to clinic translation. In this review, the recent progress of peptide‐based materials, from molecular building block peptides and self‐assembly driving forces, to biomedical and clinical applications is systematically summarized. Ex situ and in situ constructed nanomaterials based on functional peptides are presented. The advantages of intelligent in situ construction of peptide‐based nanomaterials in vivo are emphasized, including construction strategy, nanostructure modulation, and biomedical effects. This review highlights the importance of self‐assembled peptide nanostructures for nanomedicine and can facilitate further knowledge and understanding of these nanosystems toward clinical translation.     

Autonomous Ex Novo Chemical Assembly with Blebbing and Division of Functional Polymer Vesicles from a “Homogeneous Mixture”

The chemical energy and radicals from an oscillating chemical reaction are used to synthesize a polymer vesicle from a homogeneous solution of monomeric units. Periodically formed radicals from the Belousov–Zhabotinsky (B–Z) reaction initiate radical polymerization between a polyethylene glycol based chain transfer agent (PEG‐CTA) and hydrophilic acrylonitrile monomers in water. The growth of a hydrophobic chain on the hydrophilic PEG chain induces self‐assembly of polymeric amphiphiles to form micrometer‐sized vesicles entrapping an active oscillating B–Z reaction. In our experimental conditions, the different chemical environments inside and outside the vesicles contribute to enlarge the area and diameter of the resulting self‐assembled vesicles and, in some cases, promote blebbing and division.     

Hierarchical Tumor Microenvironment‐Responsive Nanomedicine for Programmed Delivery of Chemotherapeutics

Nanomedicines have been demonstrated to have passive or active tumor targeting behaviors, which are promising for cancer chemotherapy. However, most nanomedicines still suffer from a suboptimal targeting effect and drug leakage, resulting in unsatisfactory treatment outcome. Herein, a hierarchical responsive nanomedicine (HRNM) is developed for programmed delivery of chemotherapeutics. The HRNMs are prepared via the self‐assembly of cyclic Arg‐Gly‐Asp (RGD) peptide conjugated triblock copolymer, poly(2‐(hexamethyleneimino)ethyl methacrylate)‐poly(oligo‐(ethylene glycol) monomethyl ether methacrylate)‐poly[reduction‐responsive camptothecin] (PC7A‐POEG‐PssCPT). In blood circulation, the RGD peptides are shielded by the POEG coating; therefore, the nanosized HRNMs can achieve effective tumor accumulation through passive targeting. Once the HRNMs reach a tumor site, due to the hydrophobic‐to‐hydrophilic conversion of PC7A chains induced by the acidic tumor microenvironment, the RGD peptides will be exposed for enhanced tumor retention and cellular internalization. Moreover, in response to the glutathione inside cells, active CPT drugs will be released rapidly for chemotherapy. The in vitro and in vivo results confirm effective tumor targeting, potent antitumor effect, and reduced systemic toxicity of the HRNMs. This HRNM is promising for enhanced chemotherapeutic delivery.     

Tough Supramolecular Polymer Networks with Extreme Stretchability and Fast Room‐Temperature Self‐Healing

Recent progress on highly tough and stretchable polymer networks has highlighted the potential of wearable electronic devices and structural biomaterials such as cartilage. For some given applications, a combination of desirable mechanical properties including stiffness, strength, toughness, damping, fatigue resistance, and self‐healing ability is required. However, integrating such a rigorous set of requirements imposes substantial complexity and difficulty in the design and fabrication of these polymer networks, and has rarely been realized. Here, we describe the construction of supramolecular polymer networks through an in situ copolymerization of acrylamide and functional monomers, which are dynamically complexed with the host molecule cucurbit[8]uril (CB[8]). High molecular weight, thus sufficient chain entanglement, combined with a small‐amount dynamic CB[8]‐mediated non‐covalent crosslinking (2.5 mol%), yields extremely stretchable and tough supramolecular polymer networks, exhibiting remarkable self‐healing capability at room temperature. These supramolecular polymer networks can be stretched more than 100× their original length and are able to lift objects 2000× their weight. The reversible association/dissociation of the host–guest complexes bestows the networks with remarkable energy dissipation capability, but also facile complete self‐healing at room temperature. In addition to their outstanding mechanical properties, the networks are ionically conductive and transparent. The CB[8]‐based supramolecular networks are synthetically accessible in large scale and exhibit outstanding mechanical properties. They could readily lead to the promising use as wearable and self‐healable electronic devices, sensors and structural biomaterials.     

Peptide‐Based Nanotubes and Their Applications in Bionanotechnology

In nature, biological nanomaterials are synthesized under ambient conditions in a natural microscopic‐sized laboratory, such as a cell. Biological molecules, such as peptides and proteins, undergo self‐assembly processes in vivo and in vitro, and these monomers are assembled into various nanometer‐scale structures at room temperature and atmospheric pressure. The self‐assembled peptide nanostructures can be further organized to form nanowires, nanotubes, and nanoparticles via their molecular‐recognition functions. The application of molecular self‐assemblies of synthetic peptides as nanometer‐scale building blocks in devices is robust, practical, and affordable due to their advantages of reproducibility, large‐scale production ability, monodispersity, and simpler experimental methods. It is also beneficial that smart functionalities can be added at desired positions in peptide nanotubes through well‐established chemical and peptide syntheses. These features of peptide‐based nanotubes are the driving force for investigating and developing peptide nanotube assemblies for biological and non‐biological applications.     

Ordered Arrangement and Optical Properties of Silica‐Stabilized Gold Nanoparticle–PNIPAM Core–Satellite Clusters for Sensitive Raman Detection

Gold–polymer hybrid nanoparticles attract wide interest as building blocks for the engineering of photonic materials and plasmonic (active) metamaterials with unique optical properties. In particular, the coupling of the localized surface plasmon resonances of individual metal nanostructures in the presence of nanometric gaps can generate highly enhanced and confined electromagnetic fields, which are frequently exploited for metal‐enhanced light–matter interactions. The optical properties of plasmonic structures can be tuned over a wide range of properties by means of their geometry and the size of the inserted nanoparticles as well as by the degree of order upon assembly into 1D, 2D, or 3D structures. Here, the synthesis of silica‐stabilized gold–poly(N‐isopropylacrylamide) (SiO₂‐Au‐PNIPAM) core–satellite superclusters with a narrow size distribution and their incorporation into ordered self‐organized 3D assemblies are reported. Significant alterations of the plasmon resonance are found for different assembled structures as well as strongly enhanced Raman signatures are observed. In a series of experiments, the origin of the highly enhanced signals can be assigned to the interlock areas of adjacent SiO₂‐Au‐PNIPAM core–satellite clusters and their application for highly sensitive nanoparticle‐enhanced Raman spectroscopy is demonstrated.     

Porous Silicon Nanoparticle Delivery of Tandem Peptide Anti‐Infectives for the Treatment of Pseudomonas aeruginosa Lung Infections

There is an urgent need for new materials to treat bacterial infections. In order to improve antibacterial delivery, an anti‐infective nanomaterial is developed that utilizes two strategies for localization: i) a biodegradable nanoparticle carrier to localize therapeutics within the tissue, and ii) a novel tandem peptide cargo to localize payload to bacterial membranes. First, a library of antibacterial peptides is screened that combines a membrane‐localizing peptide with a toxic peptide cargo and discovers a tandem peptide that displays synergy between the two domains and is able to kill Pseudomonas aeruginosa at sub‐micromolar concentrations. To apply this material to the lung, the tandem peptide is loaded into porous silicon nanoparticles (pSiNPs). Charged peptide payloads are loaded into the pores of the pSiNP at ≈30% mass loading and ≈90% loading efficiency using phosphonate surface chemistry. When delivered to the lungs of mice, this anti‐infective nanomaterial exhibits improved safety profiles over free peptides. Moreover, treatment of a lung infection of P. aeruginosa results in a large reduction in bacterial numbers and markedly improves survival compared to untreated mice. Collectively, this study presents the selection of a bifunctional peptide‐based anti‐infective agent and its delivery via biodegradable nanoparticles for application to an animal model of lung infection.     

Tumor Microenvironment‐Triggered Aggregation of Antiphagocytosis 99mTc‐Labeled Fe3O4 Nanoprobes for Enhanced Tumor Imaging In Vivo

A tumor microenvironment responsive nanoprobe is developed for enhanced tumor imaging through in situ crosslinking of the Fe₃O₄ nanoparticles modified with a responsive peptide sequence in which a tumor‐specific Arg‐Gly‐Asp peptide for tumor targeting and a self‐peptide as a “mark of self” are linked through a disulfide bond. Positioning the self‐peptide at the outmost layer is aimed at delaying the clearance of the nanoparticles from the bloodstream. After the self‐peptide is cleaved by glutathione within tumor microenvironment, the exposed thiol groups react with the remaining maleimide moieties from adjacent particles to crosslink the particles in situ. Both in vitro and in vivo experiments demonstrate that the aggregation substantially improves the magnetic resonance imaging (MRI) contrast enhancement performance of Fe₃O₄ particles. By labeling the responsive particle probe with ^99mTc, single‐photon emission computed tomography is enabled not only for verifying the enhanced imaging capacity of the crosslinked Fe₃O₄ particles, but also for achieving sensitive dual modality imaging of tumors in vivo. The novelty of the current probe lies in the combination of tumor microenvironment‐triggered aggregation of Fe₃O₄ nanoparticles for boosting the T₂ MRI effect, with antiphagocytosis surface coating, active targeting, and dual‐modality imaging, which is never reported before.     

Drug‐Loaded Multifunctional Nanoparticles Targeted to the Endocardial Layer of the Injured Heart Modulate Hypertrophic Signaling

Ischemic heart disease is the leading cause of death globally. Severe myocardial ischemia results in a massive loss of myocytes and acute myocardial infarction, the endocardium being the most vulnerable region. At present, current therapeutic lines only ameliorate modestly the quality of life of these patients. Here, an engineered nanocarrier is reported for targeted drug delivery into the endocardial layer of the left ventricle for cardiac repair. Biodegradable porous silicon (PSi) nanoparticles are functionalized with atrial natriuretic peptide (ANP), which is known to be expressed predominantly in the endocardium of the failing heart. The ANP–PSi nanoparticles exhibit improved colloidal stability and enhanced cellular interactions with cardiomyocytes and non‐myocytes with minimal toxicity. After confirmation of good retention of the radioisotope 111‐Indium in relevant physiological buffers over 4 h, in vivo single‐photon emission computed tomography (SPECT/CT) imaging and autoradiography demonstrate increased accumulation of ANP–PSi nanoparticles in the ischemic heart, particularly in the endocardial layer of the left ventricle. Moreover, ANP–PSi nanoparticles loaded with a novel cardioprotective small molecule attenuate hypertrophic signaling in the endocardium, demonstrating cardioprotective potential. These results provide unique insights into the development of nanotherapies targeted to the injured region of the myocardium.     

A novel strategy to graft RGD peptide on biomaterials surfaces for endothelization of small-diamater vascular grafts and tissue engineering blood vessel

To improve the performance of small-diamater vascular grafts, endothelization of biomaterials surfaces and tissue engineering are more promising strategies to fabricate small-diamater vascular grafts. In this study, a Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide was grafted on the surfaces of poly(carbonate urethane)s (PCUs), with photoactive 4-benzoylbenzoic acid (BBA) by UV irradiation. The photoactive peptides (BBM-GRGDSP) were synthesized with classical active ester of peptide synthesis. The modified surfaces of PCU with the photoactive RGD peptides were characterized by water contact angle measurement and X-ray Photoelectron Spectroscopy (XPS), which results suggested that the peptides were successfully grafted on the PCU surfaces. The effect of these modified surfaces on endothelial cells (ECs) adhesion and proliferation was examined over 72 h. PCU surfaces coupled with the synthetic photoactive RGD peptides, as characterized with phase contrast microscope and the metabolic activity (MTT) assay enhanced ECs proliferation and spreading with increasing concentration of RGD peptides grafted on their surfaces. Increased retention of ECs was also observed on the polymers surfaces under flow shear stress conditions. The results demonstrated that GRGDSP peptides grafted on the surfaces of polymers with photoactive 4-benzoylbenzoic acids could be an efficient method of fabrication for artificial small-diamater blood vessels. The modified polymer is expected to be used for small-diamater vascular grafts and functional tissue engineered blood vessels to improve ECs adhesion and retention on the polymer surfaces under flow shear stress conditions.     

Tunable Hydrophile–Lipophile Balance for Manipulating Structural Stability and Tumor Retention of Amphiphilic Nanoparticles

Hydrophile–lipophile balance (HLB) has a great influence on the self‐assembly and physicochemical properties of amphiphiles, thus affecting their biological effects. It is shown that amphiphilic nanoparticles (NPs) with a moderate HLB value display enhanced stability and highly efficient tumor retention. 2,2‐Bis(hydroxymethyl)propionic acid hyperbranched poly(ethylene glycol) (PEG)–pyropheophorbide‐a (Ppa) amphiphiles (G320P, G310P, G220P, and G210P) are synthesized with a tunable HLB value from 6.1 to 9.9 by manipulating the number of generation of dendrons (G2 or G3) and the molecular weight of PEG chains (10 or 20 kDa). Molecular dynamics simulations reveal that G320P and G210P with a moderate HLB value (8.0 and 7.8) self‐assemble into very stable NPs with a small solvent accessible surface area and high nonbonding interactions. G320P with a moderate HLB value (8.0) and a long PEG chain excels against other NPs in prolonging the blood circulation time of Ppa (up to 13‐fold), penetrating deeply into multicellular tumor spheroids and accumulating in tumors, and enhancing the PDT efficacy with a tumor growth inhibition of 96.0%. Rational design of NPs with a moderate HLB value may be implemented in these NP‐derived nanomedicines to achieve high levels of retention in tumors.     

Self‐Assembly of an Amphiphilic Janus Camptothecin–Floxuridine Conjugate into Liposome‐Like Nanocapsules for More Efficacious Combination Chemotherapy in Cancer

The combination of camptothecin (CPT) and fluoropyrimidine derivatives acts synergistically at a 1:1 molar ratio. Practically, the greatest challenge is the development of a single liposomal formulation that can both encapsulate and maintain this drug combination at an exact 1:1 ratio to achieve coordinated pharmacokinetics. Consequently, a new type of liposome‐like nanocapsule (NC) is developed from a highly symmetric Janus camptothecin–floxuridine conjugate (JCFC) amphiphile, which is synthesized by coupling two hydrophobic CPT molecules and two hydrophilic floxuridine (FUDR) molecules to multivalent pentaerythritol via a hydrolyzable ester linkage. JCFC NCs possess remarkably high drug‐loading contents, and no premature release because of the highly stable co‐delivery of the drug combination without the need for any carrier. It is shown that JCFC NCs consistently provide synergy and avoid antagonism in a broad panel of tumor cell lines. In vivo delivery of JCFC NCs leads to longer blood retention half‐life, higher tumorous accumulation and cellular uptake of drugs, and greatly enhanced efficacy in murine tumor models compared to CPT, FUDR, and CPT + FUDR. This liposomal strategy can be extended to other hydrophilic and hydrophobic anticancer drugs that are coupled to pentaerythritol to self‐assemble into nanocapsules for drug self‐delivery, pointing to potential clinical translation in near future.     

Ultrastable Near‐Infrared Conjugated‐Polymer Nanoparticles for Dually Photoactive Tumor Inhibition

It is highly desired that satisfactory photoactive agents with ideal photophysical characteristics are explored for potent cancer phototherapeutics. Herein, bifunctional nanoparticles of low‐bandgap donor–acceptor (D–A)‐type conjugated‐polymer nanoparticles (CP‐NPs) are developed to afford a highly efficient singlet‐to‐triplet transition and photothermal conversion for near‐infrared (NIR) light‐induced photodynamic (PDT)/photothermal (PTT) treatment. CP‐NPs display remarkable NIR absorption with the peak at 782 nm, and perfect resistance to photobleaching. Photoexcited CP‐NPs undergo singlet‐to‐triplet intersystem crossing through charge transfer in the excited D–A system and simultaneous nonradiative decay from the electron‐deficient electron acceptor isoindigo derivative under single‐wavelength NIR light irradiation, leading to distinct singlet oxygen quantum yield and high photothermal conversion efficiency. Moreover, the CP‐NPs display effective cellular uptake and cytoplasmic translocation from lysosomes, as well as effective tumor accumulation, thus promoting severe light‐triggered damage caused by favorable reactive oxygen species (ROS) generation and potent hyperthermia. Thus, CP‐NPs achieve photoactive cell damage through their photoconversion ability for synergistic PDT/PTT treatment with tumor ablation. The proof‐of‐concept design of D–A‐type conjugated‐polymer nanoparticles with ideal photophysical characteristics provides a general approach to afford potent photoactive cancer therapy.     

Polymer‐Based Photonic Crystals

In this report, we highlight the development of polymers as 1D photonic crystals and subsequently place special emphasis on the activities in self‐assembled block copolymers as a promising platform material for new photonic crystals. We review recent progress, including the use of plasticizer and homopolymer blends of diblock copolymers to increase periodicity and the role of self‐assembly in producing 2D and 3D photonic crystals. The employment of inorganic nanoparticles to increase the dielectric contrast and the application of a biasing field during self‐assembly to control the long‐range domain order and orientation are examined, as well as in‐situ tunable materials via a mechanochromic materials system. Finally, the inherent optical anisotropy of extruded polymer films and side‐chain liquid‐crystalline polymers is shown to provide greater degrees of freedom for further novel optical designs.     

Sandwiched Electrochemiluminescent Peptide Biosensor for the Detection of Prognostic Indicator in Early‐Stage Cancer Based on Hollow,Magnetic, and Self‐Enhanced Nanosheets

Currently, peptide‐based protein‐recognition has been recognized as an effective and promising approach for protein assays. However, sandwiched peptide‐based biosensor with high sensitivity and low background has not been proposed before. Herein, a sandwiched electrochemiluminescence (ECL) peptide‐based biosensor is constructed for Cyclin A₂ (CA2), a prognostic indicator in early stage of multiple cancers, based on nanosheets with hollow, magnetic, and ECL self‐enhanced properties. First, hollow and magnetic manganese oxide nanocrystals (H‐Mn₃O₄) are synthesized using triblock copolymeric micelles with core–shell–corona architecture as templates. Then, polyethyleneimine (PEI) and the composite of platinum nanoparticles and tris (4,4′‐dicarboxylicacid‐2,2′‐bipyridyl) ruthenium (II) (PtNPs–Ru) are immobilized on H‐Mn₃O₄ to form H‐Mn₃O₄–PEI–PtNPs–Ru nanocomposite, in which PEI as coreactant can effectively enhance the luminous efficiency and PtNPs as nanochannels can greatly accelerate the electron transfer. Finally, due to the coordination between Eu³⁺ and carboxyl, the obtained H‐Mn₃O₄–PEI–PtNPs–Ru aggregates locally to form sheet‐like nanostructures ((H‐Mn₃O₄–PEI–PtNPs–Ru)_n–Eu³⁺), by which the luminous efficiency is further increased. Based on the nanosheets and two designed peptides, a sandwiched ECL biosensor, using palladium nanocages synthesized through galvanic replacement reaction as substrate, is proposed for CA2 with a linear range from 0.001 to 100 ng mL^?1 and a detection limit of 0.3 pg mL^?1.     

Electrospray Encapsulation of Hydrophilic and Hydrophobic Drugs in Poly(L‐lactic acid) Nanoparticles

An electrospray method is developed for preparation of beclomethasone‐dipropionate‐ and salbutamol‐sulfate‐loaded biodegradable poly(L ‐lactic acid) nanoparticles. Different set‐up parameters for electrospraying are examined on particle size, and preparation conditions are optimized for producing spherical‐drug‐loaded nanoscale particles by controllable processing parameters. Polylactide (PLA)–drug nanoparticles with average diameters of around 200 nm are achieved in a stable cone‐jet mode with a flow rate of 4 µL min^?1, polymer concentration of 1%, and ammonium hydroxide content of 0.05%. Morphology and size of the drug–polymer nanoparticles are analyzed by scanning electron microscopy and transmission electron microscopy. Changes in the crystallinity of the PLA polymer and the model drugs are detected by X‐ray powder diffraction, and the absence of molecular interactions are confirmed by thermal analyses. The results indicate clearly that electrospraying is a potential method for producing polymeric nanoparticles and for encapsulating both hydrophilic and hydrophobic drugs efficiently into the nanoparticles.     

Vapor‐Sensitive Materials from Polysaccharide Fibers with Self‐Assembling Twisted Microstructures

Polysaccharides play a variety of roles in nature, including molecular recognition and water retention. The microscale structures of polysaccharides are seldom utilized in vitro because of the difficulties in regulating self‐assembled structures. Herein, it is demonstrated that a cyanobacterial polysaccharide, sacran, can hierarchically self‐assemble as twisted fibers from nanoscale to microscale with diameters of ≈1 µm and lengths >800 µm that are remarkably larger than polysaccharides previously reported. Unlike other rigid fibrillar polysaccharides, the sacran fiber is capable of flexibly transforming into two‐dimensional (2D) snaking and three‐dimensional (3D) twisted structures at an evaporative air–water interface. Furthermore, a vapor‐sensitive film with a millisecond‐scale response time is developed from the crosslinked polymer due to the spring‐like behavior of twisted structures. This study increases understanding of the functions of fibers in nature and establishes a novel approach to the design of environmentally adaptive materials for soft sensors and actuators.     

The Binary Effect on Methicillin‐Resistant Staphylococcus aureus of Polymeric Nanovesicles Appended by Proline‐Rich Amino Acid Sequences and Inorganic Nanoparticles

Prevalent research underscores efforts to engineer highly sophisticated nanovesicles that are functionalized to combat antibiotic‐resistant bacterial infections, especially those caused by methicillin‐resistant Staphylococcus aureus (MRSA), and that aid with wound healing or immunomodulation. This is especially relevant for patients who are susceptible to Staphylococcus aureus infections postoperatively. Here, antibacterial formulations are incorporated into polymeric, biocompatible vesicles called polymersomes (PsNPs) that self‐assemble via hydrophobic interactions of admixed aqueous and organic substances. Nano‐PsNPs are synthesized using a high molecular weight amphiphilic block copolymer, and are conjugated to include antimicrobial peptides (AMPs) along the peripheral hydrophilic region and silver nanoparticles (AgNPs) inside their hydrophobic corona. In vitro testing on bacterial and human cell lines indicates that finely tuned treatment concentrations of AMP and AgNPs in PsNPs synergistically inhibits the growth of MRSA without posing significant side effects, as compared with other potent treatment strategies. A ratio of silver‐to‐AMP of about 1:5.8 corresponding to ≈11.6 µg mL^?1 of silver nanoparticles and 14.3 × 10^?6 m of the peptide, yields complete MRSA inhibition over a 23 h time frame. This bacteriostatic activity, coupled with nominal cytotoxicity toward native human dermal fibroblast cells, extends the potential for AMP/AgNP polymersome therapies to replace antibiotics in the clinical setting.