Bubble‐Sheet‐Like Interface Design with an Ultrastable Solid Electrolyte Layer for High‐Performance Dual‐Ion Batteries

In this work, a bubble‐sheet‐like hollow interface design on Al foil anode to improve the cycling stability and rate performance of aluminum anode based dual‐ion battery is reported, in which, a carbon‐coated hollow aluminum anode is used as both anode materials and current collector. This anode structure can guide the alloying position inside the hollow nanospheres, and also confine the alloy sizes within the hollow nanospheres, resulting in significantly restricted volumetric expansion and ultrastable solid electrolyte interface (SEI). As a result, the battery demonstrates an excellent long‐term cycling stability within 1500 cycles with ≈99% capacity retention at 2 C. Moreover, this cell displays an energy density of 169 Wh kg^?1 even at high power density of 2113 W kg^?1 (10 C, charge and discharge within 6 min), which is much higher than most of conventional lithium ion batteries. The interfacial engineering strategy shown in this work to stabilize SEI layer and control the alloy forming position could be generalized to promote the research development of metal anodes based battery systems.     

Potassium‐Based Dual Ion Battery with Dual‐Graphite Electrode

A potassium ion battery has potential applications for large scale electric energy storage systems due to the abundance and low cost of potassium resources. Dual graphite batteries, with graphite as both anode and cathode, eliminate the use of transition metal compounds and greatly lower the overall cost. Herein, combining the merits of the potassium ion battery and dual graphite battery, a potassium‐based dual ion battery with dual‐graphite electrode is developed. It delivers a reversible capacity of 62 mA h g^?1 and medium discharge voltage of ≈3.96 V. The intercalation/deintercalation mechanism of K⁺ and PF₆^? into/from graphite is proposed and discussed in detail, with various characterizations to support.     

A Nonaqueous Potassium‐Based Battery–Supercapacitor Hybrid Device

A low cost nonaqueous potassium‐based battery–supercapacitor hybrid device (BSH) is successfully established for the first time with soft carbon as the anode, commercialized activated carbon as the cathode, and potassium bis(fluoro‐slufonyl)imide in dimethyl ether as the electrolyte. This BSH reconciles the advantages of potassium ion batteries and supercapacitors, achieving a high energy density of 120 W h kg^?1, a high power density of 599 W kg^?1, a long cycle life of 1500 cycles, and an ultrafast charge/slow discharge performance (energy density and power density are calculated based on the total mass of active materials in the anode and cathode). This work demonstrates a great potential of applying the nonaqueous BSH for low cost electric energy storage systems.     

Penne‐Like MoS2/Carbon Nanocomposite as Anode for Sodium‐Ion‐Based Dual‐Ion Battery

The dual‐ion battery (DIB) system has attracted great attention owing to its merits of low cost, high energy, and environmental friendliness. However, the DIBs based on sodium‐ion electrolytes are seldom reported due to the lack of appropriate anode materials for reversible Na⁺ insertion/extraction. Herein, a new sodium‐ion based DIB named as MoS₂/C‐G DIB using penne‐like MoS₂/C nanotube as anode and expanded graphite as cathode is constructed and optimized for the first time. The hierarchical MoS₂/C nanotube provides expanded (002) interlayer spacing of 2H‐MoS₂, which facilitates fast Na⁺ insertion/extraction reaction kinetics, thus contributing to improved DIB performance. The MoS₂/C‐G DIB delivers a reversible capacity of 65 mA h g^?1 at 2 C in the voltage window of 1.0–4.0 V, with good cycling performance for 200 cycles and 85% capacity retention, indicating the feasibility of potential applications for sodium‐ion based DIBs.     

Etching‐Assisted Crumpled Graphene Wrapped Spiky Iron Oxide Particles for High‐Performance Li‐Ion Hybrid Supercapacitor

From graphene oxide wrapped iron oxide particles with etching/reduction process, high‐performance anode and cathode materials of lithium‐ion hybrid supercapacitors are obtained in the same process with different etching conditions, which consist of partially etched crumpled graphene (CG) wrapped spiky iron oxide particles (CG@SF) for a battery‐type anode, and fully etched CG for a capacitive‐type cathode. The CG is formed along the shape of spikily etched particles, resulting in high specific surface area and electrical conductivity, thus the CG‐based cathode exhibits remarkable capacitive performance of 210 F g^?1 and excellent rate capabilities. The CG@SF can also be ideal anode materials owing to spiky and porous morphology of the particles and tightly attached crumpled graphene onto the spiky particles, which provides structural stability and low contact resistance during repetitive lithiation/delithiation processes. The CG@SF anode shows a particularly high capacitive performance of 1420 mAh g^?1 after 270 cycles, continuously increases capacity beyond the 270th cycle, and also maintains a high capacity of 170 mAh g^?1 at extremely high speeds of 100 C. The full‐cell exhibits a higher energy density up to 121 Wh kg^?1 and maintains high energy density of 60.1 Wh kg^?1 at 18.0 kW kg^?1. This system could thus be a practical energy storage system to fill the gap between batteries and supercapacitors.     

Graphene Caging Silicon Particles for High‐Performance Lithium‐Ion Batteries

Silicon holds great promise as an anode material for lithium‐ion batteries with higher energy density; its implication, however, is limited by rapid capacity fading. A catalytic growth of graphene cages on composite particles of magnesium oxide and silicon, which are made by magnesiothermic reduction reaction of silica particles, is reported herein. Catalyzed by the magnesium oxide, graphene cages can be conformally grown onto the composite particles, leading to the formation of hollow graphene‐encapsulated Si particles. Such materials exhibit excellent lithium storage properties in terms of high specific capacity, remarkable rate capability (890 mAh g^?1 at 5 A g^?1), and good cycling retention over 200 cycles with consistently high coulombic efficiency at a current density of 1 A g^?1. A full battery test using LiCoO₂ as the cathode demonstrates a high energy density of 329 Wh kg^?1.     

A High Energy and Power Li‐Ion Capacitor Based on a TiO2 Nanobelt Array Anode and a Graphene Hydrogel Cathode

A novel hybrid Li‐ion capacitor (LIC) with high energy and power densities is constructed by combining an electrochemical double layer capacitor type cathode (graphene hydrogels) with a Li‐ion battery type anode (TiO₂ nanobelt arrays). The high power source is provided by the graphene hydrogel cathode, which has a 3D porous network structure and high electrical conductivity, and the counter anode is made of free‐standing TiO₂ nanobelt arrays (NBA) grown directly on Ti foil without any ancillary materials. Such a subtle designed hybrid Li‐ion capacitor allows rapid electron and ion transport in the non‐aqueous electrolyte. Within a voltage range of 0.0?3.8 V, a high energy of 82 Wh kg^?1 is achieved at a power density of 570 W kg^?1. Even at an 8.4 s charge/discharge rate, an energy density as high as 21 Wh kg^?1 can be retained. These results demonstrate that the TiO₂ NBA//graphene hydrogel LIC exhibits higher energy density than supercapacitors and better power density than Li‐ion batteries, which makes it a promising electrochemical power source.     

Ultra‐High Pyridinic N‐Doped Porous Carbon Monolith Enabling High‐Capacity K‐Ion Battery Anodes for Both Half‐Cell and Full‐Cell Applications

An ultrahigh pyridinic N‐content‐doped porous carbon monolith is reported, and the content of pyridinic N reaches up to 10.1% in overall material (53.4 ± 0.9% out of 18.9 ± 0.4% N content), being higher than most of previously reported N‐doping carbonaceous materials, which exhibit greatly improved electrochemical performance for potassium storage, especially in term of the high reversible capacity. Remarkably, the pyridinic N‐doped porous carbon monolith (PNCM) electrode exhibits high initial charge capacity of 487 mAh g^?1 at a current density of 20 mA g^?1, which is one of the highest reversible capacities among all carbonaceous anodes for K‐ion batteries. Moreover, the K‐ion full cell is successfully assembled, demonstrating a high practical energy density of 153.5 Wh kg^?1. These results make PNCM promising for practical application in energy storage devices and encourage more investigations on a similar potassium storage system.     

A Dual Carbon‐Based Potassium Dual Ion Battery with Robust Comprehensive Performance

Dual carbon‐based potassium dual ion batteries (K‐DCBs) have recently attracted ever‐increasing attention owing to the potential advantages of high performance‐to‐cost ratio, good safety, and environmental friendliness. However, the reported K‐DCBs still cannot simultaneously meet the requirements of high capacity, long cycling stability, and low cost, which are necessary for practical applications. In this study, a K‐DCB with good comprehensive performance including capacity, cycling stability, medium discharge voltage, and energy density is developed by introducing the optimal cathode and anode materials, i.e., KS6 and natural graphite, respectively. An initial capacity of ≈54.6 mAh g^?1 and 92.5% capacity retention after 400 cycles can be delivered in a wide voltage window of 2.4–5.4 V at the current density of 100 mA g^?1. A high medium discharge voltage around 4.2 V and an energy density up to 158.3 Wh kg^?1 are meanwhile delivered by the K‐DCB. In addition, the working mechanism of the devices is understood in detail. It is believed that valuable contributions to the electrochemical performance improvement of the related devices toward practical applications can be provided by this study.     

Hollow Carbon Nanobelts Codoped with Nitrogen and Sulfur via a Self‐Templated Method for a High‐Performance Sodium‐Ion Capacitor

Sodium‐ion capacitors (SICs) have attracted enormous attention due to their high energy density and high power density. In this work, N and S codoped hollow carbon nanobelts (N/S‐HCNs) are synthesized by a self‐templated method. The as‐synthesized carbon nanobelts exhibit excellent performance in pseudocapacitance and electric double layer anions adsorption. After pairing the N/S‐HCNs cathode with a tin foil anode in a carbonate electrolyte, the obtained SIC achieves a high specific capacity of 400 mAh g^?1 at 1 A g^?1 (based on the mass of cathode material) and energy density of 250.35 Wh kg^?1 at 676 W kg^?1 (based on the total mass of cathode and anode materials). Besides, the presented SIC also demonstrates high cycling stability with almost 100% capacity retention after 10 000 cycles, which is among the best results of the reported SICs, suggesting the potential for high‐performance energy storage applications.     

Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries

Potassium‐ion batteries (PIBs) are one of the emerging energy‐storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K⁺ transport kinetics and the structural instability of the cathode materials during K⁺ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K_0.77MnO₂?0.23H₂O) are prepared by “hydrothermal potassiation” as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g^?1 at a current density of 100 mA g^?1, as well as great rate capability (77 mAh g^?1 at 1000 mA g^?1) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g^?1). With the introduction of adequate K⁺ ions in the interlayer, the K‐birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K⁺ intercalation/deintercalation. The practical feasibility of the K‐birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard–soft composite carbon anode. This study highlights effective K⁺‐intercalation for birnessite to achieve superior K‐storage performance for PIBs, making it a general strategy for developing high‐performance cathodes in rechargeable batteries beyond lithium‐ion batteries.     

Polarity‐Switchable Symmetric Graphite Batteries with High Energy and High Power Densities

Multifunctional batteries with enhanced safety performance have received considerable attention for their applications at extreme conditions. However, few batteries can endure a mix‐up of battery polarity during charging, a common wrong operation of rechargeable batteries. Herein, a polarity‐switchable battery based on the switchable intercalation feature of graphite is demonstrated. The unique redox‐amphoteric intercalation behavior of graphite allows a reversible switching of graphite between anode and cathode, thus enabling polarity‐switchable symmetric graphite batteries. The large potential gap between anion and cation intercalation delivers a high midpoint device voltage (≈average voltage) of ≈4.5 V. Further, both the graphite anode and cathode are kinetically activated during the polarity switching. Consequently, polarity‐switchable symmetric graphite batteries exhibit a remarkable cycling stability (96% capacity retention after 500 cycles), a high power density of 8.66 kW kg^?1, and a high energy density of 227 Wh kg^?1 (calculated based on the total weight of active materials in both anode and cathode), which are superior to other symmetric batteries and recently reported dual‐graphite or dual‐carbon batteries. This work will inspire the development of new multifunctional energy‐storage devices based on novel materials and electrolyte systems.     

An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal Batteries

The solid‐state Li battery is a promising energy‐storage system that is both safe and features a high energy density. A main obstacle to its application is the poor interface contact between the solid electrodes and the ceramic electrolyte. Surface treatment methods have been proposed to improve the interface of the ceramic electrolytes, but they are generally limited to low‐capacity or short‐term cycling. Herein, an electron/ion dual‐conductive solid framework is proposed by partially dealloying the Li–Mg alloy anode on a garnet‐type solid‐state electrolyte. The Li–Mg alloy framework serves as a solid electron/ion dual‐conductive Li host during cell cycling, in which the Li metal can cycle as a Li‐rich or Li‐deficient alloy anode, free from interface deterioration or volume collapse. Thus, the capacity, current density, and cycle life of the solid Li anode are improved. The cycle capability of this solid anode is demonstrated by cycling for 500 h at 1 mA cm^?2, followed by another 500 h at 2 mA cm^?2 without short‐circuiting, realizing a record high cumulative capacity of 750 mA h cm^?2 for garnet‐type all‐solid‐state Li batteries. This alloy framework with electron/ion dual‐conductive pathways creates the possibility to realize high‐energy solid‐state Li batteries with extended lifespans.     

Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

The development of high‐capacity, Earth‐abundant, and stable cathode materials for robust aqueous Zn‐ion batteries is an ongoing challenge. Herein, ultrathin nickel cobaltite (NiCo₂O₄) nanosheets with enriched oxygen vacancies and surface phosphate ions (P–NiCo₂O_4‐x) are reported as a new high‐energy‐density cathode material for rechargeable Zn‐ion batteries. The oxygen‐vacancy and surface phosphate‐ion modulation are achieved by annealing the pristine NiCo₂O₄ nanosheets using a simple phosphating process. Benefiting from the merits of substantially improved electrical conductivity and increased concentration of active sites, the optimized P–NiCo₂O_4‐x nanosheet electrode delivers remarkable capacity (309.2 mAh g^?1 at 6.0 A g^?1) and extraordinary rate performance (64% capacity retention at 60.4 A g^?1). Moreover, based on the P–NiCo₂O_4‐x cathode, our fabricated P–NiCo₂O_4‐x//Zn battery presents an impressive specific capacity of 361.3 mAh g^?1 at the high current density of 3.0 A g^?1 in an alkaline electrolyte. Furthermore, extremely high energy density (616.5 Wh kg^?1) and power density (30.2 kW kg^?1) are also achieved, which outperforms most of the previously reported aqueous Zn‐ion batteries. This ultrafast and high‐energy aqueous Zn‐ion battery is promising for widespread application to electric vehicles and intelligent devices.     

Nitrogen and Phosphorus Codoped Vertical Graphene/Carbon Cloth as a Binder‐Free Anode for Flexible Advanced Potassium Ion Full Batteries

With the fast development in flexible electronic technology, power supply devices with high performance, low‐cost, and flexibility are becoming more and more important. Potassium ion batteries (KIBs) have a brilliant prospect for applications benefiting from high voltage, lost cost, as well as similar electrochemistry to lithium ion batteries (LIBs). Although carbon materials have been studied as KIBs anodes, their rate capability and cycling stability are still unsatisfactory due to the large‐size potassium ions. Herein, a nitrogen (N) and phosphorus (P) dual‐doped vertical graphene (N, P‐VG) uniformly grown on carbon cloth (N, P‐VG@CC) is reported as a binder‐free anode for flexible KIBs. With the combined advantages of rich active sites, highly accessible surface, highly conductive network, larger interlayer spacing as well as robust structural stability, this binder‐free N, P‐VG@CC anode exhibits high capacity (344.3 mAh g^?1), excellent rate capability (2000 mA g^?1; 46.5% capacity retention), and prominent long‐term cycling stability (1000 cycles; 82% capacity retention), outperforming most of the recently reported carbonaceous anodes. Moreover, a potassium ion full cell is successfully assembled on the basis of potassium Prussian blue (KPB)//N, P‐VG@CC, exhibiting a large energy density of 232.5 Wh kg^?1 and outstanding cycle stability.     

Surface‐Engineered Black Niobium Oxide@Graphene Nanosheets for High‐Performance Sodium‐/Potassium‐Ion Full Batteries

Nanoscale surface‐engineering plays an important role in improving the performance of battery electrodes. Nb₂O₅ is one typical model anode material with promising high‐rate lithium storage. However, its modest reaction kinetics and low electrical conductivity obstruct the efficient storage of larger ions of sodium or potassium. In this work, partially surface‐amorphized and defect‐rich black niobium oxide@graphene (black Nb₂O_5?x@rGO) nanosheets are designed to overcome the above Na/K storage problems. The black Nb₂O_5?x@rGO nanosheets electrodes deliver a high‐rate Na and K storage capacity (123 and 73 mAh g^?1, respectively at 3 A g^?1) with long‐term cycling stability. Besides, both Na‐ion and K‐ion full batteries based on black Nb₂O_5?x@rGO nanosheets anodes and vanadate‐based cathodes (Na_0.33V₂O₅ and K_0.5V₂O₅ for Na‐ion and K‐ion full batteries, respectively) demonstrate promising rate and cycling performance. Notably, the K‐ion full battery delivers higher energy and power densities (172 Wh Kg^?1 and 430 W Kg^?1), comparable to those reported in state‐of‐the‐art K‐ion full batteries, accompanying with a capacity retention of ≈81.3% over 270 cycles. This result on Na‐/K‐ion batteries may pave the way to next‐generation post‐lithium batteries.     

Hybrid Aqueous/Nonaqueous Water‐in‐Bisalt Electrolyte Enables Safe Dual Ion Batteries

Dual ion batteries (DIBs) have recently attracted ever‐increasing attention owing to the potential advantages of low material cost and good environmental friendliness. However, the potential safety hazards, cost, and environmental concerns mainly resulted from the commonly used nonaqueous organic solvents severely hinder the practical application of DIBs. Herein, a hybrid aqueous/nonaqueous water‐in‐bisalt electrolyte with both broad electrochemical stability window and excellent safety performance is developed. The lithium‐based DIB assembled using KS6 graphite and niobium pentoxide as the active materials in the cathode and anode exhibits good comprehensive performance including capacity, cycling stability, rate performance, and medium discharge voltage. Initial capacities of ≈47.6 and 29.6 mAh g^?1 retention after 300 cycles can be delivered with a medium discharge voltage of around 2.2 V in the voltage window of 0–3.2 V at the current density of 200 mA g^?1. Good rate performance for the battery can be indicated by 29.7 mAh g^?1 discharge capacity retention at 400 mA g^?1. It is noteworthy that the coulombic efficiency of the battery can reach as high as 93.9%, which is comparable to that of the corresponding DIBs using nonaqueous organic electrolytes.     

Bimetal‐Organic‐Framework Derivation of Ball‐Cactus‐Like Ni‐Sn‐P@C‐CNT as Long‐Cycle Anode for Lithium Ion Battery

Metal phosphides are a new class of potential high‐capacity anodes for lithium ion batteries, but their short cycle life is the critical problem to hinder its practical application. A unique ball‐cactus‐like microsphere of carbon coated NiP₂/Ni₃Sn₄ with deep‐rooted carbon nanotubes (Ni‐Sn‐P@C‐CNT) is demonstrated in this work to solve this problem. Bimetal‐organic‐frameworks (BMOFs, Ni‐Sn‐BTC, BTC refers to 1,3,5‐benzenetricarboxylic acid) are formed by a two‐step uniform microwave‐assisted irradiation approach and used as the precursor to grow Ni‐Sn@C‐CNT, Ni‐Sn‐P@C‐CNT, yolk–shell Ni‐Sn@C, and Ni‐Sn‐P@C. The uniform carbon overlayer is formed by the decomposition of organic ligands from MOFs and small CNTs are deeply rooted in Ni‐Sn‐P@C microsphere due to the in situ catalysis effect of Ni‐Sn. Among these potential anode materials, the Ni‐Sn‐P@C‐CNT is found to be a promising anode with best electrochemical properties. It exhibits a large reversible capacity of 704 mA h g^?1 after 200 cycles at 100 mA g^?1 and excellent high‐rate cycling performance (a stable capacity of 504 mA h g^?1 retained after 800 cycles at 1 A g^?1). These good electrochemical properties are mainly ascribed to the unique 3D mesoporous structure design along with dual active components showing synergistic electrochemical activity within different voltage windows.     

High‐Performance Flexible Freestanding Anode with Hierarchical 3D Carbon‐Networks/Fe7S8/Graphene for Applicable Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have gained tremendous interest for grid scale energy storage system and power energy batteries. However, the current researches of anode for SIBs still face the critical issues of low areal capacity, limited cycle life, and low initial coulombic efficiency for practical application perspective. To solve this issue, a kind of hierarchical 3D carbon‐networks/Fe₇S₈/graphene (CFG) is designed and synthesized as freestanding anode, which is constructed with Fe₇S₈ microparticles well‐welded on 3D‐crosslinked carbon‐networks and embedded in highly conductive graphene film, via a facile and scalable synthetic method. The as‐prepared freestanding electrode CFG represents high areal capacity (2.12 mAh cm^?2 at 0.25 mA cm^?2) and excellent cycle stability of 5000 cycles (0.0095% capacity decay per cycle). The assembled all‐flexible sodium‐ion battery delivers remarkable performance (high areal capacity of 1.42 mAh cm^?2 at 0.3 mA cm^?2 and superior energy density of 144 Wh kg^?1), which are very close to the requirement of practical application. This work not only enlightens the material design and electrode engineering, but also provides a new kind of freestanding high energy density anode with great potential application prospective for SIBs.     

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual‐Doped Hard Carbon in Capacitive Potassium‐Ion Storage

The intercalation of potassium ions into graphite is demonstrated to be feasible, while the electrochemical performance of potassium‐ion batteries (KIBs) remains unsatisfying. More effort is needed to improve the specific capacity while maintaining a superior rate capability. As an attempt, nitrogen/oxygen dual‐doped hierarchical porous hard carbon (NOHPHC) is introduced as the anode in KIBs by carbonizing and acidizing the NH₂‐MIL‐101(Al) precursor. Specifically, the NOHPHC electrode delivers high reversible capacities of 365 and 118 mA h g^?1 at 25 and 3000 mA g^?1, respectively. The capacity retention reaches 69.5% at 1050 mA g^?1 for 1100 cycles. The reasons for the enhanced electrochemical performance, such as the high capacity, good cycling stability, and superior rate capability, are analyzed qualitatively and quantitatively. Quantitative analysis reveals that mixed mechanisms, including capacitance and diffusion, account for the K‐ion storage, in which the capacitance plays a more important role. Specifically, the enhanced interlayer spacing (0.39 nm) enables the intercalation of large K ions, while the high specific surface area of ≈1030 m² g^?1 and the dual‐heteroatom doping (N and O) are conducive to the reversible adsorption of K ions.