A neutralizing epitope of human papillomavirus type 11 is principally described by a continuous set of residues which overlap a distinct linear, surface-exposed epitope

A panel of monoclonal antibodies (MAbs) which neutralize human papillomavirus type 11 (HPV11) in the athymic mouse xenograph neutralization assay and bind HPV11 virus-like particles (VLPs) has been described. We recently presented evidence that the Gly131-Tyr132 residues of the major capsid protein L1 confer type 11-specific binding. However, residues distally located on the primary L1 sequence also were shown to affect binding. This poses the question whether the epitope is principally centered in the region of Gly131-Tyr132 or, alternatively, is comprised of diversely located residues which come into proximity only upon proper assembly. We analyzed the result of numerous substitutions located between Tyr123 and Val142 of the HPV11 L1 sequence. We show that substitutions at five positions result in loss of binding for one or more of these MAbs by an enzyme-linked immunosorbent assay which measures antibody binding to VLPs. We demonstrate that binding of these MAbs is redirected to HPV16 VLPs which harbor eight type 11-like substitutions within the homologous region. Three of these substitutions did not affect binding when individually substituted in HPV11 but yet were still required to transfer binding to substituted HPV16 VLPs. The results demonstrate that the epitope for this class of neutralizing MAbs, although conformational and requiring VLP assembly for presentation, principally lies along a 20-residue stretch of the L1 major capsid protein. This targets the region for evaluation of the possibility of receptor binding and suggests possibilities for the design of peptide inhibitors of virus infectivity.     

The L1 major capsid protein of human papillomavirus type 16 variants affects yield of virus-like particles produced in an insect cell expression system

The L1 major capsid proteins of six human papillomavirus type 16 (HPV-16) strains were expressed in insect cells by using recombinant baculoviruses. Virus-like particles (VLPs) which appeared similar to empty virions were identified by electron microscopy for all HPV strains investigated. However, the yield of VLPs produced varied in a range from 1 to 79 depending on the HPV-16 strain. The L1 proteins of these strains differed by up to 15 amino acids from the L1 protein of the prototype HPV-16 strain. Mutations in the amino acid region from residues 83 to 97 seemed to affect the level of expression of the L1 protein. These results are important when considering the development of HPV vaccines and serological tests. They indicate that strains inducing high levels of VLP production must be selected for the development of vaccines. Moreover, the L1 proteins of all strains investigated were able to bind with DNA. We also investigated the seroreactivities of VLPs derived from three different HPV-16 strains from Algeria, Senegal, and the Philippines by testing sera from women from 11 countries in immunoglobulin G-specific enzyme-linked immunosorbent assays. We observed a strong correlation between the reactivities of the three different VLP variants, independent of the geographical origin of the sera investigated. These results indicate that the three strains investigated are serologically cross-reactive despite the fact that their L1 proteins differ in 14 amino acids and suggest that VLPs derived from only one HPV-16 strain could be sufficient for the development of an HPV-16 vaccine and anti-HPV-16 tests.     

Identification of domains in canine parvovirus VP2 essential for the assembly of virus-like particles

Canine parvovirus capsids are composed of 60 copies of VP2 and 6 to 10 copies of VPl. To locate essential sites of interaction between VP2 monomers, we have analyzed the effects of a number of VP2 deletion mutants representing the amino terminus and the four major loops of the surface, using as an assay the formation of virus-like particles (VLPs) expressed by recombinant baculoviruses. For the amino terminus we constructed three mutants with progressively larger deletions, i.e., 9, 14, and 24 amino acids. Deletions of 9 and 14 amino acids did not affect the morphology and assembly capabilities of the mutants. However, the mutant with the 24-amino-acid deletion did not show hemagglutination properties or correct VLP morphology, stressing again the relevance of the RNER domain in canine parvovirus functionality. Three of the four mutants with deletions in the loops failed to make correct VLPs, indicating that these regions are essential for correct capsid assembly and morphology. Only the mutant with the deletion in loop 2 was able to assemble in regular VLPs, suggesting that this loop has little or no effect in capsid morphogenesis. Further research has demonstrated that this region can tolerate the insertion of foreign epitopes that are correctly exposed in the surface of the capsid. This result opens the door to the use of these VLPs for antigen delivery.     

Human papillomavirus type 11 (HPV-11) neutralizing antibodies in the serum and genital mucosal secretions of African green monkeys immunized with HPV-11 virus-like particles expressed in yeast

It has been shown previously that immunization of animals with recombinant virus-like particles (VLPs) consisting of the viral capsid proteins L1 or L1 plus L2 protected animals against experimental viral challenge. However, none of these experimental models addresses the issue of whether systemic immunization with VLPs elicits a neutralizing antibody response in the genital mucosa. Such a response may be necessary to protect the uterine cervix against infection with genital human papillomavirus (HPV) types. African green monkeys systemically immunized with HPV-11 VLPs expressed in Saccharomyces cerevisiae and formulated on aluminum adjuvant elicited high-titered HPV-11 VLP-specific serum antibody responses. Sera from these immunized monkeys neutralized HPV-11 in the athymic mouse xenograft system. Significant levels of HPV-11-neutralizing antibodies also were observed in cervicovaginal secretions. These findings suggest that protection against HPV infection of the uterine cervix may be possible through systemic immunization with HPV VLPs.     

In vitro generation and type-specific neutralization of a human papillomavirus type 16 virion pseudotype

We report a system for generating infectious papillomaviruses in vitro that facilitates the analysis of papillomavirus assembly, infectivity, and serologic relatedness. Cultured hamster BPHE-1 cells harboring autonomously replicating bovine papillomavirus type 1 (BPV1) genomes were infected with recombinant Semliki Forest viruses that express the structural proteins of BPV1. When plated on C127 cells, extracts from cells expressing L1 and L2 together induced numerous transformed foci that could be specifically prevented by BPV neutralizing antibodies, demonstrating that BPV infection was responsible for the focal transformation. Extracts from BPHE-1 cells expressing L1 or L2 separately were not infectious. Although Semliki Forest virus-expressed L1 self-assembled into virus-like particles (VLPs), viral DNA was detected in particles only when L2 was coexpressed with L1, indicating that genome encapsidation requires L2. Expression of human papillomavirus type 16 (HPV16) L1 and L2 together in BPHE-1 cells also yielded infectious virus. These pseudotyped virions were neutralized by antiserum to HPV16 VLPs derived from European (114/K) or African (Z-1194) HPV16 variants but not by antisera to BPV VLPs, to a poorly assembling mutant HPV16 L1 protein, or to VLPs of closely related genital HPV types. Extracts from BPHE-1 cells coexpressing BPV L1 and HPV16 L2 or HPV16 L1 and BPV L2 were not infectious. We conclude that (i) mouse C127 cells express the cell surface receptor for HPV16 and are able to uncoat HPV16 capsids; (ii) if a papillomavirus DNA packaging signal exists, then it is conserved between the BPV and HPV16 genomes; (iii) functional L1-L2 interaction exhibits type specificity; and (iv) protection by HPV virus-like particle vaccines is likely to be type specific.     

Virus-specific interaction between the human cytomegalovirus major capsid protein and the C terminus of the assembly protein precursor

We previously identified a minimal 12-amino-acid domain in the C terminus of the herpes simplex virus type 1 (HSV-1) scaffolding protein which is required for interaction with the HSV-1 major capsid protein. An alpha-helical structure which maximizes the hydropathicity of the minimal domain is required for the interaction. To address whether cytomegalovirus (CMV) utilizes the same strategy for capsid assembly, several glutathione S-transferase fusion proteins to the C terminus of the CMV assembly protein precursor were produced and purified from bacterial cells. The study showed that the glutathione S-transferase fusion containing 16 amino acids near the C-terminal end was sufficient to interact with the major capsid protein. Interestingly, no cross-interaction between HSV-1 and CMV could be detected. Mutation analysis revealed that a three-amino-acid region at the N-terminal side of the central Phe residue of the CMV interaction domain played a role in determining the viral specificity of the interaction. When this region was converted so as to correspond to that of HSV-1, the CMV assembly protein domain lost its ability to interact with the CMV major capsid protein but gained full interaction with the HSV-1 major capsid protein. To address whether the minimal interaction domain of the CMV assembly protein forms an alpha-helical structure similar to that in HSV-1, peptide competition experiments were carried out. The results showed that a cyclic peptide derived from the interaction domain with a constrained (alpha-helical structure competed for interaction with the major capsid protein much more efficiently than the unconstrained linear peptide. In contrast, a cyclic peptide containing an Ala substitution for the critical Phe residue did not compete for the interaction at all. The results of this study suggest that (i) CMV may have developed a strategy similar to that of HSV-1 for capsid assembly; (ii) the minimal interaction motif in the CMV assembly protein requires an alpha-helix for efficient interaction with the major capsid protein; and (iii) the Phe residue in the CMV minimal interaction domain is critical for interaction with the major capsid protein.     

Surface conformational and linear epitopes on HPV-16 and HPV-18 L1 virus-like particles as defined by monoclonal antibodies

A panel of 24 monoclonal antibodies (MAbs) was generated against human papillomavirus (HPV) types 16 and 18 L1 virus-like particles (VLPs). The MAbs were screened for reactivity to a variety of VLPs prepared from HPV-6, -11, -16, -18, -31, -33, -35, and -45, cottontail rabbit papillomavirus, bovine papillomavirus type 1, and a set of 35 overlapping 20-amino-acid peptides spanning the entire HPV-16 L1 gene. Type-specific linear and conformational surface epitopes were detected as well as several cross-reactive linear epitopes that showed various levels of cross-reactivity between different genital HPV and animal papillomavirus L1s. Most of the linear epitopes were mapped using synthetic peptides, and the epitopes were identified as being either surface or buried within the VLP as defined by the pattern of reactivity in ELISA using intact and disrupted VLP antigen. These MAbs may be useful reagents to help define neutralizing epitopes of HPV-16 and -18 when infectivity assays become available, and to define the regions of L1 that are exposed on the surface or buried within the assembled capsid.     

Self-association of herpes simplex virus type 1 ICP35 is via coiled-coil interactions and promotes stable interaction with the major capsid protein

The ordered copolymerization of viral proteins to form the herpes simplex virus (HSV) capsid occurs within the nucleus of the infected cell and is a complex process involving the products of at least six viral genes. In common with capsid assembly in double-stranded DNA bacteriophages, HSV capsid assembly proceeds via the assembly of an outer capsid shell around an interior scaffold. This capsid intermediate matures through loss of the scaffold and packaging of the viral genomic DNA. The interior of the HSV capsid intermediate contains the viral protease and assembly protein which compose the scaffold. Proteolytic processing of these proteins is essential for and accompanies capsid maturation. The assembly protein (ICP35) is the primary component of the scaffold, and previous studies have demonstrated it to be capable of intermolecular association with itself and with the major capsid protein, VP5. We have defined structural elements within ICP35 which are responsible for intermolecular self-association and for interaction with VP5. Yeast (Saccharomyces cerevisiae) two-hybrid assays and far-Western studies with purified recombinant ICP35 mapped a core self-association domain between Ser165 and His219. Site-directed mutations in this domain implicate a putative coiled coil in ICP35 self-association. This coiled-coil motif is highly conserved within the assembly proteins of other alpha herpesviruses. In the two-hybrid assay the core self-association domain was sufficient to mediate stable self-association only in the presence of additional structural elements in either N- or C-terminal flanking regions. These regions also contain conserved sequences which exhibit a high propensity for alpha helicity and may contribute to self-association by forming additional short coiled coils. Our data supports a model in which ICP35 molecules have an extended conformation and associate in parallel orientation through homomeric coiled-coil interactions. In additional two-hybrid experiments we evaluated ICP35 mutants for association with VP5. We discovered that in addition to the C-terminal 25 amino acids of ICP35, previously shown to be required for VP5 binding, an additional upstream region was required. This region is between Ser165 and His234 and contains the core self-association domain. Site-directed mutations and construction of chimeric molecules in which the self-association domain of ICP35 was replaced by the GCN4 leucine zipper indicated that this region contributes to VP5 binding through mediating self-association of ICP35 and not through direct binding interactions. Our results suggest that self-association of ICP35 strongly promotes stable association with VP5 in vivo and are consistent with capsid formation proceeding via formation of stable subassemblies of ICP35 and VP5 which subsequently assemble into capsid intermediates in the nucleus.     

Functional analysis of disulfide linkages clustered within the amino terminus of human apolipoprotein B

We tested the involvement of N-terminal six disulfide bonds (Cys-1 through Cys-12) of human apolipoprotein (apo) B in the assembly and secretion of lipoproteins using two C-terminal-truncated apoB variants, namely B50 and B18. In transfected rat hepatoma McA-RH7777 cells, B50 could assemble very low density lipoproteins (VLDL), and B18 was secreted as high density lipoproteins. When all 12 cysteine residues were substituted with alanines in B50, the mutant protein (B50C1-12) lost its ability to assemble lipid and was degraded intracellularly. However, mutation had no effect on B50C1-12 translation or translocation across the microsomal membrane. Post-translational degradation of B50C1-12 was partially inhibited by the proteasome inhibitor MG132. To determine which cysteines were critical in VLDL assembly and secretion, we prepared three additional mutant B50s, each containing four selected Cys-to-Ala substitutions in tandem (i.e. Cys-1 to Cys-4, Cys-5 to Cys-8, and Cys-9 to Cys-12). Expression of these mutants showed that disruption of disulfide bond formation within Cys-5 to Cys-8 diminished apoB secretion, whereas within Cys-1 to Cys-4 or Cys-9 to Cys-12 had lesser or no effect. In another two mutants in which only one disulfide bond (i.e. between Cys-5 and Cys-6 or between Cys-7 and Cys-8) was eliminated, only secretion of B50 with mutations at Cys-7 and Cys-8 was decreased. Thus, the disulfide bond involving Cys-7 and Cys-8 is most important for VLDL assembly and secretion. In addition, assembly and secretion of VLDL containing endogenous B100 or B48 were impaired in cells transfected with B50s containing Cys-7 and Cys-8 mutation. The Cys-to-Ala substitution abolished recognition of B50 by MB19, a conformational antibody with an epitope at the N terminus of human apoB. The Cys-to-Ala substitution also attenuated secretion of B18, but the effect of the mutation on B18 secretion was less evident than on B50.     

Assembly of the herpes simplex virus capsid: preformed triplexes bind to the nascent capsid

The herpes simplex virus type 1 (HSV-1) capsid is a T=16 icosahedral shell that forms in the nuclei of infected cells. Capsid assembly also occurs in vitro in reaction mixtures created from insect cell extracts containing recombinant baculovirus-expressed HSV-1 capsid proteins. During capsid formation, the major capsid protein, VP5, and the scaffolding protein, pre-VP22a, condense to form structures that are extended into procapsids by addition of the triplex proteins, VP19C and VP23. We investigated whether triplex proteins bind to the major capsid-scaffold protein complexes as separate polypeptides or as preformed triplexes. Assembly products from reactions lacking one triplex protein were immunoprecipitated and examined for the presence of the other. The results showed that neither triplex protein bound unless both were present, suggesting that interaction between VP19C and VP23 is required before either protein can participate in the assembly process. Sucrose density gradient analysis was employed to determine the sedimentation coefficients of VP19C, VP23, and VP19C-VP23 complexes. The results showed that the two proteins formed a complex with a sedimentation coefficient of 7.2S, a value that is consistent with formation of a VP19C-VP23(2) heterotrimer. Furthermore, VP23 was observed to have a sedimentation coefficient of 4.9S, suggesting that this protein exists as a dimer in solution. Deletion analysis of VP19C revealed two domains that may be required for attachment of the triplex to major capsid-scaffold protein complexes; none of the deletions disrupted interaction of VP19C with VP23. We propose that preformed triplexes (VP19C-VP23(2) heterotrimers) interact with major capsid-scaffold protein complexes during assembly of the HSV-1 capsid.     

The reovirus mutant tsA279 L2 gene is associated with generation of a spikeless core particle: implications for capsid assembly

Previous studies which used intertypic reassortants of the wild-type reovirus serotype 1 Lang and the temperature-sensitive (ts) serotype 3 mutant clone tsA279 identified two ts lesions; one lesion, in the M2 gene segment, was associated with defective transmembrane transport of restrictively assembled virions (P. R. Hazelton and K. M. Coombs, Virology 207:46-58, 1995). In the present study we show that the second lesion, in the L2 gene segment, which encodes the lambda2 protein, is associated with the accumulation of a core-like particle defective for the lambda2 pentameric spike. Physicochemical, biochemical, and immunological studies showed that these structures were deficient for genomic double-stranded RNA, the core spike protein lambda2, and the minor core protein micro2. Core particles with the lambda2 spike structure accumulated after temperature shift-down from a restrictive to a permissive temperature in the presence of cycloheximide. These data suggest the spike-deficient, core-like particle is an assembly intermediate in reovirus morphogenesis. The existence of this naturally occurring primary core structure suggests that the core proteins lambda1, lambda3, and sigma2 interact to initiate the process of virion capsid assembly through a dodecahedral mechanism. The next step in the proposed capsid assembly model would be the association of the minor core protein mu2, either preceding or collateral to the condensation of the lambda2 pentameric spike at the apices of the primary core structure. The assembly pathway of the reovirus double capsid is further elaborated when these observations are combined with structures identified in other studies.     

Improved fetal nucleated erythrocyte sorting purity using intracellular antifetal hemoglobin and Hoechst 33342

Three capsid proteins of SV40 (VP1, VP2, and VP3) were expressed in insect cells using recombinant baculoviruses. When the VP1 capsid protein was expressed alone or co-expressed with VP2 and VP3, virus-like particles (VLP) were produced. In the latter case, the minor capsid proteins, VP2 and VP3, were incorporated into the VLP. VLPs with and without VP2 and VP3, and the wild type SV40 virions were indistinguishable under electron microscope. The sedimentation coefficient, S20,w' obtained for the VLP consisting of VP1 alone (VP1-VLP) was 170 S, and that for the VLP consisting of all of the capsid proteins (VP1/2/3-VLP) was 174 S. Treatment of the VP1-VLP with a calcium ion chelating agent and a reducing agent caused dissociation of the VP1-VLP. The dissociated and purified VP1 proteins were identified as pentamers of VP1 based on the molecular weight determination by sedimentation equilibrium. The pentamers were shown to possess the ability to re-assemble into VLP which had the S20,w of 141S. The results are discussed in relation to the morphogenesis of SV40.     

Proteolytic refolding of the HIV-1 capsid protein amino-terminus facilitates viral core assembly

After budding, the human immunodeficiency virus (HIV) must 'mature' into an infectious viral particle. Viral maturation requires proteolytic processing of the Gag polyprotein at the matrix-capsid junction, which liberates the capsid (CA) domain to condense from the spherical protein coat of the immature virus into the conical core of the mature virus. We propose that upon proteolysis, the amino-terminal end of the capsid refolds into a beta-hairpin/helix structure that is stabilized by formation of a salt bridge between the processed amino-terminus (Pro1) and a highly conserved aspartate residue (Asp51). The refolded amino-terminus then creates a new CA-CA interface that is essential for assembling the condensed conical core. Consistent with this model, we found that recombinant capsid proteins with as few as four matrix residues fused to their amino-termini formed spheres in vitro, but that removing these residues refolded the capsid amino-terminus and redirected protein assembly from spheres to cylinders. Moreover, point mutations throughout the putative CA-CA interface blocked capsid assembly in vitro, core assembly in vivo and viral infectivity. Disruption of the conserved amino-terminal capsid salt bridge also abolished the infectivity of Moloney murine leukemia viral particles, suggesting that lenti- and oncoviruses mature via analogous pathways.     

Study of herpes simplex virus maturation during a synchronous wave of assembly

Production of an infectious herpes simplex virus (HSV) particle requires sequential progression of maturing virions through a series of complex assembly events. Capsids must be constructed in the nucleus, packaged with the viral genome, and transported to the nuclear periphery. They then bud into the nuclear membrane to acquire an envelope, traffic through the cytoplasm, and are released from the cell. Most of these phenomena are very poorly defined, and no suitable model system has previously been available to facilitate molecular analyses of genomic DNA packaging, capsid envelopment, and intracellular virion trafficking. We report the development of such an assay system for HSV type 1 (HSV-1). Using a reversible temperature-sensitive mutation in capsid assembly, we have developed conditions in which an accumulated population of immature capsids can be rapidly, efficiently, and synchronously chased to maturity. By assaying synchronized scaffold cleavage, DNA packaging, and acquisition of infectivity, we have demonstrated the kinetics with which these events occur. Kinetic and morphological features of intranuclear and extranuclear virion trafficking have similarly been examined by indirect immunofluorescence microscopy and electron microscopy. This system should prove a generally useful tool for the molecular dissection of many late events in HSV-1 biogenesis.     

Human papillomavirus type 11 recombinant L1 capsomeres induce virus-neutralizing antibodies

The human papillomavirus type 11 (HPV-11) L1 major capsid protein can be trypsinized to generate recombinant capsomeres that retain HPV genotype-restricted capsid antigenicity (M. Li, T. P. Cripe, P. A. Estes, M. K. Lyon, R. C. Rose, and R. L. Garcea, J. Virol. 71:2988-2995, 1997). In the present study, HPV-11 virion-neutralizing monoclonal antibodies H11.F1 and H11.H3, previously characterized as recognizing two distinct HPV-11 capsid-neutralizing antigenic domains (S. W. Ludmerer, D. Benincasa, and G. E. Mark III, J. Virol. 70:4791-4794, 1996), were each found to be highly immunoreactive with trypsin-generated capsomeres in an enzyme-linked immunosorbent assay (ELISA). Capsomeres were used to generate high-titer polyclonal immune sera that demonstrated HPV genotype-restricted reactivity by ELISA. The capsomere antisera were then tested in an in vitro infectivity assay and found to neutralize HPV-11 virions. In this assay, HPV-11 capsomere polyclonal antisera exhibited neutralization titers (10(-5) to 10(-6)) comparable to those obtained with a virion-neutralizing antiserum raised previously against intact HPV-11 VLPs (R. C. Rose, R. C. Reichman, and W. Bonnez, J. Gen. Virol. 75:2075-2079, 1994). These results indicate that highly immunogenic, genotype-restricted HPV capsid-neutralizing antigenic domains are contained entirely within capsomeres. Thus, capsomeres may be viable vaccine candidates for the prevention of HPV disease.     

The herpes simplex virus triplex protein, VP23, exists as a molten globule

Two proteins, VP19C (50,260 Da) and VP23 (34,268 Da), make up the triplexes which connect adjacent hexons and pentons in the herpes simplex virus type 1 capsid. VP23 was expressed in Escherichia coli and purified to homogeneity by Ni-agarose affinity chromatography. In vitro capsid assembly experiments demonstrated that the purified protein was functionally active. Its physical status was examined by differential scanning calorimetry, ultracentrifugation, size exclusion chromatography, circular dichroism, fluorescence spectroscopy, and 8-anilino-1-naphthalene sulfonate binding studies. These studies established that the bacterially expressed VP23 exhibits properties consistent with its being in a partially folded, molten globule state. We propose that the molten globule represents a functionally relevant intermediate which is necessary to allow VP23 to undergo interaction with VP19C in the process of capsid assembly.     

Aromatic interactions define the binding of the alphavirus spike to its nucleocapsid

BACKGROUND: Most enveloped viruses bud from infected cells by a process in which viral intracellular core components interact with cytoplasmic domains of transmembrane spike glycoproteins. We have demonstrated previously that a tyrosine motif in the cytoplasmic domain of the Semliki Forest virus (SFV) spike glycoprotein E2 is absolutely essential for budding. In contrast, hardly anything is known regarding which region of the capsid protein is involved in spike binding. Therefore, the mechanism by which spikes are selectively sorted into the viral bud or by which energy is provided for envelopment, remains unclear. RESULTS: Molecular models of the SFV capsid protein (SFCP) and the cytoplasmic domain of the spike protein were fitted as a basis for a reverse genetics approach to characterizing the interaction between these two proteins. Biochemical analysis of mutants defined a hydrophobic pocket of the capsid protein that is involved both in spike binding and nucleocapsid assembly. CONCLUSIONS: We suggest that aromatic residues in the capsid protein serve to bind the side chain of the essential E2 tyrosine providing both specificity for spike incorporation and energy for budding. The same hydrophobic pocket also appears to play a role in capsid assembly. Furthermore, the results suggest that budding may occur in the absence of preformed nucleocapsids. This is the first demonstration of the molecular mechanisms of spike-nucleocapsid interactions during virus budding.     

Dimer/monomer equilibrium and domain separations of Escherichia coli ribosomal protein L7/L12

The dimer to monomer equilibrium and interdomain separations of cysteine variants of L7/L12 have been investigated using fluorescence spectroscopy. Steady-state polarization measurements on cysteine containing variants of L7/L12, labeled with 5-(iodoacetamido)fluorescein, demonstrated dimer to monomer dissociation constants near 30 nM for variants labeled at position 33, in the N-terminal domain, and positions 63 and 89, in the C-terminal domain. A dissociation constant near 300 nM was determined for a variant labeled at position 12, in the N-terminal domain. The polarization of a labeled C-terminal fragment did not change over the range of 200 microM to 1 nM, indicating that this construct remains monomeric at these concentrations, whereas a dimer to monomer dissociation constant near 300 nM was observed for an FITC labeled N-terminal fragment. Intersubunit fluorescence resonance energy self-transfer was observed when appropriate probes were attached to cysteines at residues 12 or 33, located in the N-terminal domain. Probes attached to cysteines at positions 63 or 89 in the C-terminal domain, however, did not exhibit intersubunit self-transfer. These results indicate that these residues in the C-terminal domains are, on average, separated by greater than 85 A. Intersubunit self-transfer does occur in a C-89 double mutation variant lacking 11 residues in the putative hinge region, indicating that the loss of the hinge region brings the two C-terminal domains closer together. Rapid subunit exchange between unlabeled wild-type L7/L12 and L7/L12 variants labeled in the N-terminal domain was also demonstrated by the loss of self-transfer upon mixing of the two proteins.     

Hemihypertrophy and a poorly differentiated embryonal rhabdomyosarcoma of the pelvis

The N-terminal, cytoplasmic tetramerization domain (T1) of voltage-gated K+ channels encodes molecular determinants for subfamily-specific assembly of alpha-subunits into functional tetrameric channels. Crystal structures of T1 tetramers from Shaw and Shaker subfamilies reveal a common four-layered scaffolding. Within layer 4, on the hypothetical membrane-facing side of the tetramer, the Shaw T1 tetramer contains four zinc ions; each is coordinated by a histidine and two cysteines from one monomer and by one cysteine from an adjacent monomer. The amino acids involved in coordinating the Zn2+ ion occur in a HX5CX20CC sequence motif that is highly conserved among all Shab, Shaw and Shal subfamily members, but is not found in Shaker subfamily members. We demonstrate by coimmunoprecipitation that a few characteristic residues in the subunit interface are crucial for subfamily-specific tetramerization of the T1 domains.     

Intrinsic signals for the assembly of hepatitis A virus particles. Role of structural proteins VP4 and 2A

Capsid assembly is the final event of virus replication, and its understanding is pivotal for the design of empty capsid-based recombinant vaccines and drug delivery systems. Although the capsid structure of several members of the picornavirus family has been elucidated, little is known about the structural elements governing the assembly process that is tightly associated with proteolytic processing of the viral polyprotein. Among the picornaviruses, hepatitis A virus (HAV) is unique in that it contains VP1-2A as a structural component and the small structural protein VP4, which argues for an assembly pathway different from that proposed for other picornaviruses. Using a recombinant system we show here that proteolytic processing of the HAV capsid proteins' precursor P1-2A is independent of the terminal domains 2A and VP4 of the substrate. However, both terminal domains play distinct roles in the assembly of viral particles. 2A as part of P1-2A is a primary signal for the assembly of pentameric structures which only further aggregate to empty viral capsids when VP4 is present as the N terminus of the precursor. Particle formation in the hepatovirus genus is thus regulated by two intrinsic signals that are distinct from those described for other picornaviruses.