Evaluation of the Hydrophilic Complexant N,N,N’,N’-tetraethyldiglycolamide (TEDGA) and its Methyl-substituted Analogues in the Selective Am(III) Separation

ABSTRACT

N,N,N’,N’-tetraethyldiglycolamide (TEDGA) is used in the French EXAm (extraction of americium) process to separate Am(III) from Cm(III) and Ln(III). In this study, the complexation behavior of TEDGA towards actinides(III) and lanthanides(III) was compared to its methyl-substituted derivatives Me-TEDGA and Me₂-TEDGA under experimental conditions applying to the EXAm process. Using the EXAm solvent, 0.6 mol/L N,N’-dimethyl-N,N’-dioctyl-hexylethoxymalonamide (DMDOHEMA) and 0.45 mol/L bis(2-ethylhexyl)-phosphoric acid (HDEHP), An(III) and Ln(III) distribution ratios increase in the order TEDGA < Me-TEDGA < Me₂-TEDGA. This is explained by differences in the strength of complexation in the aqueous phase: Conditional stability constants for the formation of [Cm(DGA)_x]³⁺ complexes decrease in the order TEDGA > Me-TEDGA > Me₂-TEDGA, as shown by time-resolved laser fluorescence spectroscopy (TRLFS). TRLFS measurements verified the exclusive existence of [Cm(DGA)₃]³⁺ complexes in the aqueous phase. Both the homoleptic [Cm(DMDOHEMA)_n]³⁺ and the heteroleptic [Cm(DGA)_x(DMDOHEMA)_y]³⁺ complexes were detected in the organic phase, as postulated in the literature.^[14]     

Preparation and characterization of three types of dinuclear iron(III) complexes with H2salbn,N,N′-disalicylidene-1,4-diaminobutane

By the reaction of the tetradentate Schiff base ligand H₂salbn, N,N^′-disalicylidene-1,4-diaminobutane with Fe^IIICl₃·6H₂O in the presence of Et₃N in MeOH a dinuclear iron(III) complex, [Fe^III(salbn)(μ-OMe)]₂ (1), has been obtained, whereas in EtOH, dinuclear complexes, [Fe^III(μ-salbn)]₂(μ-O) (2) and [Fe^III(salbn)]₂(μ-salbn) (3), are obtained. The structure of the complex 1 consists of two Fe(III) centers with one tetradentate salbn ligand (N₂O₂) which are bridged by two methoxo groups to yield a planar Fe₂O₂ core. On the other hand, in the complex 2, each of the two Fe(III) ions has a five-coordinate structure in which both salbn ligands act as a bridging didentate ligand and one oxygen atom bridges two Fe(III) ions to form a μ-oxo structure. The structure of the complex 3, which was obtained by accompanying with complex 2, consists of two six-coordinate Fe(III) centers in which each Fe(III) ion is coordinated by a tetradentate salbn ligand (N₂O₂) and one bridging salbn ligand (NO).     

Extraction of Actinide(III,IV, V,VI) Ions and TcO4 − by N,N,N′,N′‐Tetraisobutyl‐3‐Oxa‐Glutaramide

Abstract

The extraction behavior of U(VI), Np(V), Pu(IV), Am(III), and TcO₄ ^? with N,N,N′,N′‐tetraisobutyl‐3‐oxa‐glutaramide (TiBOGA) were investigated. An organic phase of 0.2 mol/L TiBOGA in 40/60% (V/V) 1‐octanol/kerosene showed good extractability for actinides (III, IV, V VI) and TcO₄ ^? from aqueous solutions of HNO₃ (0.1 to 4 mol/L). At 25°C, the distribution ratio of the actinide ions (D _An) generally increased as the concentration of HNO₃ in the aqueous phase was increased from 0.1 to 4 mol/L, while the D _Tc at first increased, then decreased, with a maximum of 3.0 at 2 mol/L HNO₃. Based on the slope analysis of the dependence of D _M (M=An or Tc) on the concentrations of reagents, the formula of extracted complexes were assumed to be UO₂L₂(NO₃)₂, NpO₂L₂(NO₃), PuL(NO₃)₄, AmL₃(NO₃)₃, and HL₂(TcO₄) where L=TiBOGA. The enthalpy and entropy of the corresponding extraction reactions, Δ_r H and Δ_r S, were calculated from the dependence of D on temperature in the range of 15–55°C. For U(VI), Np(V), Am(III) and TcO₄ ^?, the extraction reactions are enthalpy driven and disfavored by entropy (Δ_r H<0 and Δ_r S<0). In contrast, the extraction reaction of Pu(IV) is entropy driven and disfavored by enthalpy (Δ_r H>0 and Δ_r S>0). A test run with 0.2 mol/L TiBOGA in 40/60% 1‐octanol/kerosene was performed to separate actinides and TcO₄ ^? from a simulated acidic high‐level liquid waste (HLLW), using tracer amounts of ²³⁸U(VI), ²³⁷Np(V), ²³⁹Pu(IV), ²⁴¹Am(III) and ⁹⁹TcO₄ ^?. The distribution ratios of U(VI), Np(V), Pu(IV), Am(III) and TcO₄ ^? were 12.4, 3.9, 87, >1000 and 1.5, respectively, confirming that TiBOGA is a promising extractant for the separation of all actinides and TcO₄ ^? from acidic HLLW. It is noteworthy that the extractability of TiBOGA for Np(V) from acidic HLLW (D _Np(V)=3.9) is much higher than that of many other extractants that have been studied for the separation of actinides from HLLW.     

Electrospray Ionization Mass Spectrometry Investigation of BTBP – Lanthanide(III) and Actinide(III) Complexes

In the framework of nuclear waste reprocessing, the separation processes of minor actinides from fission products are developed using liquid‐liquid extraction. To gain an understanding of the mechanism involved in the extraction process, a complex formation of actinides and lanthanides with BTBPs (6,6′‐bis(5,6‐dialkyl‐1,2,4‐triazin‐3‐yl)‐2,2′‐bipyridines) was characterized using the Electrospray Ionization Mass Spectrometry (ESI‐MS) technique. This study was carried out to compare the influence of diluents and side groups of the extractants on complex formation. Three different diluents, nitrobenzene, octanol and cyclohexanone, and two extractants, C5‐BTBP and CyMe₄‐BTBP, were selected for this experiment. It was found that the change of the diluent and of the substituent on the BTBP moiety does not modify the stoichiometry of the complexes which is L₂M(NO₃)₃. It is proposed that one nitrate is directly coordinated to the metal ion, the two other anions probably remaining in the outer coordination sphere. The difference observed in extracting properties is probably due to the solvation of the complexes by the diluent. The noncovalent force that holds complexes together are likely to be largely governed by electrostatic interactions even if the hydrophobic exterior of the complexes plays an important role in the complexation/extraction mechanism. The study of the stability of the ions in the gas phase shows that the C5‐BTBP ligand has a labile hydrogen atom, which is a fragility point of C5‐BTBP.     

Extraction of Uranium(VI) and Thorium(IV) from Nitric Acid Solution by N,N,N′,N′ – Tetraoctylglutaricamide

Synthesis and characterization of N,N,N′,N′-tetraoctylglutaricamide (TOGA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time, temperature, and types of diluents) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.0TOGA and Th(NO₃)₄·1.5TOGA. The apparent equilibrium constant of U(VI) and Th(IV) extraction determined are 3.35 ± 0.03 L³/mol³ and 1.87 ± 0.01 L⁵/mol⁵ at 298 ± 1 K. Thermodynamic parameters such as the free energy(ΔG), enthalpy(ΔH), and entropy(ΔS) changes associated with the extraction processes could be evaluated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Synthesis and properties of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane

A new kind of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was prepared by the anionic polymerization with a “seed solution” as initiator. The synthesis of monomers N,N′-bis(hydroxydiphenylsilyl)tetraphenylcyclodisilazane (BHPTPC), N,N′-bis(chlorodiphenylsilyl)tetraphenylcyclodisilazane (BCPTPC), and 1,3-dichloro-1,1,3,3-tetraphenyldisilazane (DCTPS) are all reported in this study. The synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was characterized by ¹H–NMR, ²⁹Si–NMR, gel permeation chromatography (GPC), and intrinsic viscosity. The thermal stability of the polysiloxane was studied by isothermal gravimetric analysis (IGA). The results demonstrated that the synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane had excellent thermal stability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 929–933, 2001     

Effect of Anions on the Extraction of Lanthanides (III) by N,N′‐Dimethyl‐N,N′‐Diphenyl‐3‐Oxapentanediamide

Abstract

The extraction of microquantities of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y by N,N′‐dimethyl‐N,N′‐diphenyl‐3‐oxapentanediamide (DMDPhOPDA) in 1,2‐dichloroethane from aqueous media containing ClO₄ ^?, PF₆ ^?, (CF₃SO₂)₂N^? anions or by DMDPhOPDA in 1,2‐dichloroethane in the presence of 1‐butyl‐3‐methylimidazolium bis[(trifluoremethyl)sulfonyl]imide ([C₄mim][Tf₂N]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) from HNO₃ solutions has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant concentration in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. The addition of HPF₆ and (CF₃SO₂)₂NH or their salts to the aqueous HNO₃ or HCl solutions leads to an enchancement of lanthanides (III) extraction by DMDPhOPDA. A considerable synergistic effect was observed in the presence of ionic liquids (IL) in the organic phase containing DMDPhOPDA. This effect is connected with the hydrophobic nature of the IL anion. The distribution of ILs between the equilibrium organic and aqueous phases can govern the extractability of lanthanides (III) in DMDPhOPDA‐IL systems.     

Application of N,N′‐Dimethyl‐N,N′‐Di(4‐Chlorophenyl)Tetradecyl Malonamide for the Selective Recovery of Iron(III) from Concentrated Chloride Solutions

Abstract

The feasibility of using two new diamides namely; N,N′‐dimethyl‐N,N′‐di(4‐chlorophenyl)malonamide (DMDPhClMA) and N,N′‐dimethyl‐N,N′‐di(4‐chlorophenyl)tetradecylmalonamide (DMDPhClTDMA), as agents for the selective extraction of iron(III) from chloride solution was investigated. A systematic investigation has been carried out on the detailed extraction properties of iron(III) with these extractants from chloride media. The extraction of iron(III) from an aqueous chloride solution in the presence of metal ions, such as Zn(II), Co(II), Mn(II) Cu(II), Pb(II), Ni(II) and Ag(I) was carried out using DMDPhClMA or DMDPhClTDMA in binary and multicomponent mixtures. The quantitative extraction of iron(III) with DMDPhClMA and DMDPhClTDMA in toluene is observed at 4 and 7 M HCl, respectively. The quantitative stripping of Fe(III), from the loaded organic phase was successfully achieved by simple contact with water.     

Synergistic Extraction of Lanthanides(III) by Mixtures of N‐p‐Methoxybenzoyl‐N‐phenylhydroxylamine and 1,10‐Phenanthroline

Abstract

We conducted a study on the equilibrium extraction behavior of the trivalent lanthanide ions (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions into chloroform solutions containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA, HL) and 1,10‐phenanthroline (phen). The synergistic species extracted was found to be {ML₂(phen) (HL)}⁺(1/2)Tar^2?, where Tar^2? is tartrate ion. The extraction constants were calculated. The extraction separation behavior and extractability of lanthanides are discussed in comparison with the self‐adducted chelate, ML₃(HL)₂, which was extracted in the absence of phen, and synergistic extraction by mixtures of other extractants such as 2‐thenoyltrifluoroacetone, and neutral donors.     

Binuclear rhodium(III) and iridium(III) monoselenocarboxylates: Synthesis,spectroscopy and structure of an ortho-metallated iridium complex featuring an IrCCC(μ-Se) chelate ring

Monoselenocarboxylate–bridged binuclear complexes of Rh^III and Ir^III, [(Cp1MCl)₂(μ-SeCOAr)₂] (1) (M = Rh or Ir; Cp1 = pentamethylcyclopentadienyl; Ar = Ph, C₆H₄Me–4), have been isolated either by the reaction between [Cp1₂M₂(μ-Cl)₂Cl₂] with KSeCOAr in acetonitrile or by treatment of [Cp1MCl(solvent)₂][PF₆] with KSeCOAr in acetone. The novel binuclear complexes, [Cp1IrCl(μ-SeCOAr)(κ²-SeCOC₆H₃R–)IrCp1] (2) (R = H or Me-4) with ortho-metallation at one of the iridium centres have been isolated following the use of excess AgPF₆. The single crystal structure of [Cp1IrCl(μ-SeCOC₆H₅)(κ²-SeCOC₆H₄–)IrCp1] (2a) exhibits two phenylcarboselenolate moieties situated in syn fashion with respect to the “Ir₂Se₂” plane, one of which leans towards the metal centre in order to undergo ortho-metallation after iridium–chlorine bond dissociation.     

Interactions of trivalent lanthanide cations with tetradentate Schiff bases. Synthesis and characterization of lanthanide(III) complexes with N,N′-bis(pyridin-2-ylmethylene)benzene-1,2-diamine

The novel lanthanide(III) complexes [La(NO₃)₃(H₂O)L] 1, and [Ln(NO₃)₃L] (Ln=Pr 2, Sm 3, Gd 4) where L=N,N^′-bis(pyridin-2-ylmethylene)benzene-1,2-diamine, have been obtained by direct reaction of the Schiff base ligand and the corresponding hydrated lanthanide(III) nitrates in methanol. All complexes were characterized spectroscopically and thermogravimetrically. Complex 3 was also characterized with crystallographic studies. In the molecular structure of 3, Sm(III) is surrounded by all four nitrogen atoms of the Schiff base and six oxygen atoms belonging to three bidentate chelating nitrato ligands.     

Some lanthanide (III) complexes of (S,S)-(+)-2,3-dimethoxyl-N,N′-dimethyl-1,4-diaminobutane

Four new optically active complexes of the composition LnL₃Cl₃ (where, L=(S,S)-(+)-2,3-dimethoxyl-N,N^′-dimethyl-1,4-diaminobutane, Ln=La³⁺, Sm³⁺, Pr³⁺ and Nd³⁺) were prepared and characterized on the basis of their chemical analyses, molar conductance, magnetic properties, CD, XPS, visible and IR spectra. It is found that the complexes behave as non-electrolytes in DMSO and in methanol solution and possess the stoichiometric ratio of Ln:C:N:O:Cl =1.1:24.0:6.1:6.0:3.1 which is consistent with the analyses data. The magnetic moments of the complexes show little deviation from the Van Vleck values, indicating that 4f electrons do not participate in bond formation in these chelates. The thermal analysis revealed that all the complexes are anhydrous. Their dominant conformers were determined from CD spectra. A nine-coordinated model was proposed for these complexes.     

Synergistic Extraction of Lanthanides(III) with N‐p‐Methoxybenzoyl‐N‐Phenylhydroxylamine and Neutral Nitrogen Donors

Abstract

We investigated the extraction equilibrium behavior of a series of trivalent lanthanide ions, (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions using a chloroform solution containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA or HL) combined with an adductant, 1,10‐phenanthroline (phen) or 2,2′‐bipyridyl (bipy). The synergistic species extracted were found to be {ML₂(phen)(HL)}⁺(1/2)Tar^2? and {ML₂(bipy)(HL)₂}⁺(1/2)Tar^2?, where Tar^2? is the tartrate ion. The stoichiometry, the extraction constants, and the separation factors of these systems were determined. We discuss the extractability and the separation factors in comparison with self‐adduct chelates, ML₃(HL)_2,(o), which were formed in the absence of phen or bipy.     

Synthesis and Thermal Decomposition Studies of Silicon (IV) Compounds with N,N’-Bis(Salicylidene)Ethylenediimine

The silicon (IV) compounds possessing SiN₄O₂ (6), SiN₂O₂C₂ (7, 8), SiN₂O₂CCl (9) and SiN₄O₄ (10) coordinating frameworks have been synthesized in high yield by the reaction of the O,N,N,O- donor salen-type ligand N,N’-bis(salicylidene)ethylenediimine L with different silanes i.e. diethoxydiisocyanatosilane-(C₂H₅O)₂Si(NCO)₂ 1, dichlorodiphenylsilane-Ph₂SiCl₂ 2, dichloromethyl- phenylsilane-MePhSiCl₂ 3, trichlorophenylsilane-PhSiCl₃ 4 and silicon tetrachloride-SiCl₄ 5. The compounds 6–10 have been characterized by elemental analysis, IR, ¹H, ¹³C and ²⁹Si NMR and mass spectrometry. The decomposition reactivity of these compounds has been studied using a Thermal Gravimetric Analyzer (TGA) at a heating rate of 10°C/minute in an inert atmosphere.     

Carrier Facilitated Transport of Europium(III) Across Supported Liquid Membranes Containing N,N,N′,N′-tetra-2-ethylhexyl-3-oxapentane-diamide (T2EHDGA) as the Extractant

Studies on the solvent extraction and pertraction behavior of europium(III) was carried out from acidic feed solutions using N,N,N′,N′-tetra-2-ethylhexyl-3-oxapentane-diamide (T2EHDGA) in n-dodecane as the solvent. The nature of the extracted species from the solvent extraction studies conformed to Eu(NO₃)₃ · 3T2EHDGA which is in variance with the analogous Eu(III) – TODGA (linear homolog of T2EHDGA) extraction system. The transport behavior of Eu(III) was investigated from a feed containing 3.0 M HNO₃ into a receiver phase containing 0.01 M HNO₃ across a PTFE flat sheet supported liquid membrane (SLM) containing 0.2 M T2EHDGA in n-dodecane as the carrier solvent and 30% iso-decanol as the phase modifier. Effects of feed acidity, carrier extractant concentration, membrane pore size, and Eu concentration in the feed on the transport rates of Eu(III) were also investigated. Membrane diffusion coefficient (D _o) for the pertracted species was calculated using the Wilke-Chang equation as 4.25 × 10^?6 cm² · s^?1. The influence of Eu concentration on the flux was also investigated. The role of temperature on the transport rates was investigated and the thermodynamic parameters were calculated.     

Synthesis,structure, and catalytic activity of a new chiral NHC–iridium(III) complex

The new chiral NHC–iridium complex 3 has been prepared in CH₃CN from the reaction between [Ir(COD)Cl]₂, NaOAc, KI, and dibenzimidazolium salt 2 which is derived from (S)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Complex 3 has been characterized by various spectroscopic techniques, elemental analyses, and X-ray diffraction analysis. It has a distorted-octahedral IrC₂N₂IH core structure, and shows good catalytic activity for the asymmetric hydrosilylation of arylmethyl ketones, leading to 1-arylethanol with moderate ee values.     

Extraction Behavior of Actinides and Metal Ions by the Promising Extractant,N,N,N′,N′-Tetraoctyl-3,6-dioxaoctanediamide (DOODA)

Abstract

The extraction of actinides, fission products, some non-nuclear elements, and nitric acid by N,N,N′,N′-tetraoctyl-3,6-dioxaoctanediamide (DOODA-C₈) in dodecane was extensively studied. Also studied was the extraction of HNO₃ and Nd(III) by the tetradodecyl analog of DOODA-C₈ in dodecane. Both extractants contain two ether oxygen atoms in the backbone chain carrying the two amide groups and can thus act as tetradentate ligands. The extractability of actinides decreases in the order Pu(IV) > U(VI), Am(III) > Np(V) in the extraction from nitric acid and Pu(IV) > Am(III) >> U(VI) in the extraction from perchloric acid. Ions of di-, tri-, tetra-, hexa-, and heptavalent metals strongly differ in the extractability by DOODA-C₈ but, except for lanthanides(III), there is no visible correlation of their distribution ratios with ionic radii. Due to the efficient extraction of actinides, weak extraction of fission products, and sufficient extraction capacity, DOODA-C₈ is a promising extractant for the recovery of minor actinides from high-level radioactive wastes.     

Non-Dispersive Solvent Extraction of Neodymium using N,N,N’,N’-Tetraoctyl Diglycolamide (TODGA)

Hollow fiber contactor was used to study non-dispersive extraction (NDSX) of Nd³⁺ ions from aqueous solutions. N,N,N′,N′-tetraoctyl diglycolamide (TODGA) diluted with n-dodecane was used as the organic phase with di-n-hexyl octanamide (DHOA) as the phase modifier. The role of cations (H⁺/Na⁺) on the transport of Nd³⁺ ions has been investigated for this system. It was observed that H⁺ ion has a significant role to play in the Nd³⁺/TODGA complexation reaction. A mathematical model has also been developed to simulate the NDSX process in a hollow fiber contactor. A comparison has also been made between extraction profiles from the NDSX process and the hollow fiber supported liquid membrane (HFSLM) process. It was observed that NDSX gave comparatively faster rates of extraction in the presence of H⁺ ions but slower in the absence of H⁺ ions.     

Electrochemical study of the stability of the electron-donor—acceptor (EDA) complex between N,N,N′,N′-tetramethyl-p-phenylendiamine and m-dinitrobenzene in acetonitrile

The stability constant of the EDA complex between N,N,N′,N′-tetramethyl-p-phenylendiamine and m-dinitrobenzene in acetonitrile has been studied by cyclic voltammetry and potentiometric titration at constant finite current. For comparison, spectral measurements were made. The spectroscopic techniques allowed us to assume the formation of a 1:1 EDA complex of which stability in acetonitrile is lower than that previously reported in chloroform. This solvent effect is expected for such weak complexes. The electrochemical techniques give a higher value of the stability constant in similar conditions. The possible causes of the discrepancies are discussed. However, the enthalpy and entropy values for the process closely agree in both electrochemical and spectroscopic methods. This is good evidence that both techniques are accounting for the same type of interaction. The electrochemical techniques, and particularly cyclic voltammetry, seem to be fast and sensible methods to study EDA complex interactions in polar aprotic solvents.     

Synthesis,characterization and As(III) adsorption behavior of β-cyclodextrin modified hydrous ferric oxide

This study investigates the adsorption of As(III) on β-cyclodextrin modified hydrous ferric oxide (HCC). This is characterized by XRD, FESEM, AFM, XPS, BET, surface site concentration and FTIR. The modification of hydrous ferric oxide (HFO) surface by β-cyclodextrin provides ample OH groups which in turn increase As(III) adsorption on HCC compared to HFO. The adsorption remains almost constant in pH range 3–8 which decreases at higher pH (>8) and followed monolayer and pseudo first order kinetics. It is spontaneous at 303 K with increasing entropy and decreasing enthalpy. Thus HCC is found to be more efficient adsorbent than HFO.