共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
为了准确探测低温黑体的太赫兹辐射,研究了黑体的红外辐射和太赫兹各波段辐射的差异,构建了低温黑体太赫兹辐射探测装置,提出在该装置中采用窄带光谱滤光法抑制红外辐射和透过窄带太赫兹光谱.根据普朗克公式计算并对比了各波段太赫兹辐射及红外辐射的亮度值,理论数据显示223~323 K的低温黑体的红外辐射亮度是太赫兹辐射亮度的4~10倍.将在某一窄波长带宽范围内具有高透射比的太赫兹窄带光谱滤光片放置在黑体太赫兹辐射装置的探测器前,滤除红外辐射,并对黑体的太赫兹辐射量进行光谱分段探测实验.根据实验结果计算了黑体在不同太赫兹窄波段的辐射探测值的标准偏差,并对实验结果与黑体太赫兹辐射亮度理论计算值进行了比较.结果显示,窄带光谱滤光法可以实现低温黑体的太赫兹窄带辐射亮度探测. 相似文献
4.
太赫兹技术对营养品中蛋白质含量的研究 总被引:1,自引:0,他引:1
采用太赫兹时域光谱(THz-TDS)和红外光谱分析技术,研究了3种奶粉、杏仁粉和白砂糖的光学性能和光谱特性。通过对比样品在1658 cm-1和1747 cm-1处的红外光谱吸收峰,可以判定蛋白质和脂肪含量的差别。对比样品在THz波段的吸收系数和折射率,蛋白质含量较高的样品其吸收系数和折射率较高。观察样品的红外吸收峰强度和位置难以定量分析样品的蛋白质含量,但可以利用样品在THz波段的吸收系数与折射率有效地判定营养品中蛋白质的含量。实验结果表明蛋白质在太赫兹波段比在红外波段有更好的区分性,THz-TDS技术有望为营养品中蛋白质含量检测提供一种有效的分析手段。 相似文献
5.
太赫兹光谱和成像应用及展望 总被引:1,自引:0,他引:1
作为近年来颇受科技界和各国政府重视的一个新兴学科和技术领域,太赫兹辐射具有不同于其它波段电磁波的许多独特性质,因而在物理、化学、生物、材料、医学、农业、国防和军事等领域具有广阔的应用前景.结合国内外研究和应用的现状,本文概述了太赫兹时域光谱、太赫兹成像以及太赫兹技术在物理学、化学、生物学和天文领域的应用和机遇,供广大同行参考. 相似文献
6.
7.
8.
9.
利用太赫兹时域光谱技术测量了掺硫硒化镓(GaSe1-xSx)晶体在太赫兹波段的光学参数,包括折射系数、吸收系数等.使用自由空间电光取样法获得了太赫兹电磁波的脉冲波形.对不同硫掺杂量的硒化镓晶体进行了研究,在硫的掺杂量为0,0.01,0.14,0.26,0.37时,在0.2-2.0THz测得了GaSe1.S.的折射系数、... 相似文献
10.
用太赫兹时域光谱技术对防虫防蛀剂进行质量检测 总被引:1,自引:1,他引:0
太赫兹时域光谱技术可以分辨化合物结构上的微小差异并应用于物质检测与分析,为有机化工产品的鉴别及更宽有效光谱区的测试提供了新的实验方法。本文运用太赫兹时域光谱技术研究了樟脑、对二氯苯和萘三种防虫防蛀剂在太赫兹波段的光学特性。在室温氮气环境中,得到了樟脑、对二氟笨和萘在0.2-2.5THz波段的折射率和吸收谱,样品在此波段的折射率和吸收谱存在显著差异。对二氟苯和萘都有毒性。实验表明,用太赫兹时域光谱技术可以清楚地分辨出三种防虫防蛀剂以及其混合物的折射率和吸收谱的差异,通过判断特征谱线的差异从而判断此种防虫防蛀剂的毒性,此法简单,快速,准确。 相似文献
11.
12.
13.
氧在整个冶炼过程中的最活跃的因素之一,及时了解氧在冶炼过程中的变化规律,对掌握冶炼过程的物理化学变化,控制冶炼过程有着重要的意义。本章介绍快速氧含量(氧活度)测定仪的原理、性能及使用方法,并对生产环境中仪器的抗干扰方面采取的措施进行阐述。 相似文献
14.
15.
建立了一种简便易行的测定催化剂氮含量的化学发光方法。该方法用重油标准样品建立校正曲线,通过在被测催化剂样品中加入适量的与重油标样基质相似的空白白油,以缩小催化剂样品与标样间的基质差别,达到了提高测定结果准确度的目的。 相似文献
16.
The wear behaviour of high-chromium white cast irons as a function of silicon and Mischmetal content 总被引:2,自引:0,他引:2
The sliding wear behaviour of high-chromium white cast iron (16.8% Cr) has been examined as a function of silicon and Mischmetal alloy additions (1, 2, 3 and 5% Si and 0.1 and 0.3% Mischmetal). Such additions are known to modify the structure, but there is considerable controversy as to the exact effect. Silicon was found to refine the dendritic structure and increased the eutectic carbide volume fraction. However, for contents above 3%, transformation of the austenitic matrix to pearlite occurred in preference to martensite. Mischmetal additions reduced the austenite dendrite arm spacing, but did not have a significant effect on the carbide structure. The wear behaviour was investigated for each alloy in the as-cast (austenitic matrix) and hardened (martensitic) conditions using a block on ring configuration in pure sliding in the load range 42–238 N for a distance of 70 km against a hardened M2 steel counterface. For low loads (42 and 91 N), all the alloys showed a similar wear rate (3×10−4 to 4×10−4 mm3/m), associated with the formation of a thin (3 μm) oxide film of Fe2O3, the formation of very fine debris and a small depth of deformation below the worn surface (7 μm). For higher loads, wear was a strong function of microstructure, and was associated with a thicker film of the oxides Fe2O3 and Fe3O4 and greater depths of deformation. The iron with 2% silicon exhibited the best performance with a wear rate of 7×10−4 mm3/m and this was attributed to its finer structure and the formation of a thicker oxide film. In contrast, the iron with 5% silicon exhibited the worst performance, with a wear rate of 14×10−4 mm3/m, attributed to the pearlitic matrix. A linear relationship was observed between the depth of carbide fracture and the wear rate. The relationship between microstructure and wear mechanism is discussed. 相似文献
17.
18.
本文介绍了利用差动电荷转移法测量小电容变量及特点,在此基础上研制出具有高分辨率的原油含水测量仪。给出了传感器电路的实验模型及实验结果。 相似文献
19.