Single machine scheduling with interfering job sets

We consider two single machine bicriteria scheduling problems in which jobs belong to either of two different disjoint sets, each set having its own performance measure. The problem has been referred to as interfering job sets in the scheduling literature and also been called multi-agent scheduling where each agent's objective function is to be minimized. In the first problem (P1) we look at minimizing total completion time and number of tardy jobs for the two sets of jobs and present a forward SPT-EDD heuristic that attempts to generate the set of non-dominated solutions. The complexity of this specific problem is NP-hard; however some pseudo-polynomial algorithms have been suggested by earlier researchers and they have been used to compare the results from the proposed heuristic. In the second problem (P2) we look at minimizing total weighted completion time and maximum lateness. This is an established NP-hard problem for which we propose a forward WSPT-EDD heuristic that attempts to generate the set of supported points and compare our solution quality with MIP formulations. For both of these problems, we assume that all jobs are available at time zero and the jobs are not allowed to be preempted.     

Flowshop scheduling problems with transportation or deterioration between the batching and single machines

In this paper, we consider two new types of the two-machine flowshop scheduling problems where a batching machine is followed by a single machine. The first type is that normal jobs with transportation between machines are scheduled on the batching and single machines. The second type is that normal jobs are processed on the batching machine while deteriorating jobs are scheduled on the single machine. For the first type, we formulate the problem to minimize the makespan as a mixed integer programming model and prove that it is strongly NP-hard. Furthermore, a heuristic algorithm along with a worst case error bound is derived and the computational experiments are also carried out to verify the effectiveness of the proposed heuristic algorithm. For the second type, the two objectives are considered. For the problem with minimizing the makespan, we find an optimal polynomial algorithm. For the problem with minimizing the sum of completion time, we show that it is strongly NP-hard and propose an optimal polynomial algorithm for its special case.     

Scheduling nonpreemptive jobs on parallel machines subject to exponential unrecoverable interruptions

In this paper we consider the problem of scheduling n independent jobs on m parallel machines. If, while a machine is processing a job, a failure (unrecoverable interruption) occurs, the current job as well as subsequently scheduled jobs on that machine cannot be performed, and hence do not contribute to the overall revenue or throughput. The objective is to maximize the expected amount of work done before an interruption occurs. In this paper, we investigate the problem when failures are exponentially distributed. We show that the problem is NP-hard, and characterize a polynomially solvable special case. We then propose both an exact algorithm having pseudopolynomial complexity and a heuristic algorithm. A combinatorial upper bound is also proposed for the problem. Experimental results show the effectiveness of the heuristic approach.     

Scheduling a Single Server in a Two-machine Flow Shop

We study the problem of scheduling a single server that processes n jobs in a two-machine flow shop environment. A machine dependent setup time is needed whenever the server switches from one machine to the other. The problem with a given job sequence is shown to be reducible to a single machine batching problem. This result enables several cases of the server scheduling problem to be solved in O(n log n) by known algorithms, namely, finding a schedule feasible with respect to a given set of deadlines, minimizing the maximum lateness and, if the job processing times are agreeable, minimizing the total completion time. Minimizing the total weighted completion time is shown to be NP-hard in the strong sense. Two pseudopolynomial dynamic programming algorithms are presented for minimizing the weighted number of late jobs. Minimizing the number of late jobs is proved to be NP-hard even if setup times are equal and there are two distinct due dates. This problem is solved in O(n ³) time when all job processing times on the first machine are equal, and it is solved in O(n ⁴) time when all processing times on the second machine are equal. Received November 20, 2001; revised October 18, 2002 Published online: January 16, 2003     

Single machine total completion time minimization scheduling with a time-dependent learning effect and deteriorating jobs

In this article, we consider a single machine scheduling problem with a time-dependent learning effect and deteriorating jobs. By the effects of time-dependent learning and deterioration, we mean that the job processing time is defined by a function of its starting time and total normal processing time of jobs in front of it in the sequence. The objective is to determine an optimal schedule so as to minimize the total completion time. This problem remains open for the case of ?1?a?a denotes the learning index; we show that an optimal schedule of the problem is V-shaped with respect to job normal processing times. Three heuristic algorithms utilising the V-shaped property are proposed, and computational experiments show that the last heuristic algorithm performs effectively and efficiently in obtaining near-optimal solutions.     

On-line Multi-threaded Scheduling

On-line scheduling problems are studied with jobs organized in a number of sequences called threads. Each job becomes available as soon as a scheduling decision is made on all preceding jobs in the same thread.We consider two different on-line paradigms. The first one models a sort of batch process: a schedule is constructed, in an on-line way, which is to be executed later. The other one models a real-time planning situation: jobs are immediately executed at the moment they are assigned to a machine.The classical objective functions of minimizing makespan and minimizing average completion time of the jobs are studied.We establish a fairly complete set of results for these problems. One of the highlights is that List Scheduling is a best possible algorithm for the makespan problem under the real-time model if the number of machines does not exceed the number of threads by more than 1. Another one is a polynomial time best possible algorithm for minimizing the average completion time on a single machine under both on-line paradigms.     

Algorithms for a two‐machine flowshop problem with jobs of two classes

We consider a problem of scheduling jobs of two classes of urgencies in a two‐machine flowshop with the objective of minimizing total tardiness of one class for urgent jobs and the maximum completion time of the other class for non‐urgent jobs. Urgent jobs are an important consideration in the real manufacturing systems, but it has not been studied due to the difficulty of the problem. In this research, a branch‐and‐bound (B&B) algorithm is proposed through developing lower bounds, dominance properties, and heuristic algorithms for obtaining an initial feasible solution. To evaluate the performance of the proposed algorithms, computational experiments on randomly generated instances are performed. Results of the experiments show that the suggested B&B algorithm can solve problems with up to 20 jobs in a reasonable amount of CPU time.     

Approximation algorithm for the weighted flow-time minimization on a single machine with a fixed non-availability interval

In this article, we consider the non-resumable case of the single machine scheduling problem with a fixed non-availability interval. We aim to minimize the weighted sum of completion times. No polynomial 2-approximation algorithm for this problem has been previously known. We propose a 2-approximation algorithm with O(n²) time complexity where n is the number of jobs. We show that this bound is tight. The obtained result outperforms all the previous polynomial approximation algorithms for this problem.     

Algorithms for scheduling incompatible job families on single batching machine with limited capacity

Motivated by applications in food processing and semiconductor manufacturing industries, we consider the scheduling problem of a batching machine with jobs of multiple families. The machine has a limited capacity to accommodate jobs. The jobs are in arbitrary sizes and multiple families. Jobs from different families cannot be processed in a batch. We show the problems of minimizing makespan and total batch completion time are both NP-hard in the strong sense. We present a mixed integer programming model for the problems. Then we propose two polynomial time heuristics based on longest processing time first rule and first fit rule. For the special case where a larger job also has a longer processing time, the heuristic for minimizing makespan is optimal. For the general case, we show the performance guarantee of the methods for the two objectives respectively.     

Common due date assignment and scheduling with ready times

We consider the problem of scheduling a set of nonsimultaneously available jobs on one machine. Each job has a ready time only at or after which the job can be processed. All the jobs have a common due date, which needs to be determined. The problem is to determine a due date and a schedule so as to minimize a total penalty depending on the earliness, tardiness and due date. We show that this problem is strongly NP-hard and give an efficient algorithm that finds an optimal due date and schedule when either the job sequence is predetermined or all jobs have the same processing time. We also propose three approximation algorithms for the general and special cases together with their experimental analysis.

Scope and purpose

We consider the single machine due date assignment problem for scheduling jobs which are ready for processing at different times. The problem under consideration arises in production planning and scheduling concerning the setting of appropriate due dates for a number of customer orders arriving over time. Most of the earlier publications on this subject assumed that the jobs are ready for processing simultaneously. This assumption is too restrictive for real-life production systems where jobs arrive at different times. We show that the problem with unequal ready times is NP-hard and develop fast heuristic algorithms for it, and exact algorithms for two special cases.     

On-line scheduling on a single machine: minimizing the total completion time

This note deals with the scheduling problem of minimizing the sum of job completion times in a system with n jobs and a single machine. We investigate the on-line version of the problem where every job has to be scheduled immediately and irrevocably as soon as it arrives, without any information on the later arriving jobs. We prove that for any sufficiently smooth, non-negative, non-decreasing function f(n) there exists an O(f(n))-competitive on-line algorithm for minimizing the total completion time if and only if the infinite sum converges. Received: 6 May 1997 / 3 February 1999     

The two-stage assembly scheduling problem to minimize total completion time with setup times

We address the two-stage assembly scheduling problem where there are m machines at the first stage and an assembly machine at the second stage. The objective is to schedule the available n jobs so that total completion time of all n jobs is minimized. Setup times are treated as separate from processing times. This problem is NP-hard, and therefore we present a dominance relation and propose three heuristics. The heuristics are evaluated based on randomly generated data. One of the proposed heuristics is known to be the best heuristic for the case of zero setup times while another heuristic is known to perform well for such problems. A new version of the latter heuristic, which utilizes the dominance relation, is proposed and shown to perform much better than the other two heuristics.     

New simple constructive heuristic algorithms for minimizing total flow-time in the permutation flowshop scheduling problem

This paper develops a set of new simple constructive heuristic algorithms to minimize total flow-time for an $n$-jobs×$m$-machines permutation flowshop scheduling problem. We first propose a new iterative algorithm based on the best existing simple heuristic algorithm, and then integrate new indicator variables for weighting jobs into this algorithm. We also propose new decision criteria to select the best partial sequence in each iteration of our algorithm. A comprehensive numerical experiment reveals that our modifications and extensions improve the effectiveness of the best existing simple heuristic without affecting its computational efficiency.     

Completion time variance minimisation on two identical parallel processors

The problem of scheduling jobs to minimise completion time variance (CTV) is a well-known problem in scheduling research. CTV is categorized as a non-regular performance measure and its value may decrease by increasing the job completion times. This objective is relevant in situations where providing uniform service to customers is important, and is in-line with just-in-time philosophy. The problem concerned in this paper is to schedule n jobs on two identical parallel machines to minimise CTV. We consider the unrestricted version of the problem. The problem is said to be restricted when a machine is not allowed to remain idle when jobs are available for processing. It may be necessary to delay the start of job processing on a machine in order to reduce the completion time deviations. This gives rise to the unrestricted version of the problem. We discuss several properties of an optimal schedule to the problem. In this paper, we develop a lower bound on CTV for a known partial schedule and propose a branch and bound algorithm to solve the problem. Optimal solutions are obtained and results are reported.     

A DP algorithm for minimizing makespan and total completion time on a series-batching machine

This paper studies a bicriteria scheduling problem on a series-batching machine with objective of minimizing makespan and total completion time simultaneously. A series-batching machine is a machine that can handle up to b jobs in a batch and the completion time of all jobs in a batch is equal to the finishing time of the last job in the batch and the processing time of a batch is the sum of the processing times of jobs in the batch. In addition, there is a constant setup time s for each batch. For the problem we can find all Pareto optimal solutions in O(n²) time by a dynamic programming algorithm, where n denotes the number of jobs.     

Single machine due-date scheduling of jobs with decreasing start-time dependent processing times

We study the problem of scheduling jobs whose processing times are decreasing functions of their starting times. We consider the case of a single machine and a common decreasing rate for the processing times. The problem is to determine an optimal combination of the due date and schedule so as to minimize the sum of due date, earliness and tardiness penalties. We give an O(n log n) time algorithm to solve this problem.     

Minimizing cycle time and group scheduling, using Petri nets a study of heuristic methods

The objective of this paper is a study of minimizing the maximum completion time min F _max, or cycle time of the last job of a given family of jobs using flow shop heuristic scheduling techniques. Three methods are presented: minimize idle time (MIT); Campbell, Dudek and Smith (CDS); and Palmer. An example problem with ten jobs and five machines is used to compare results of these methods. A deterministic t-timed colored Petri net model has been developed for scheduling problem. An execution of the deterministic timed Petri net allows to compute performance measures by applying graph traversing algorithms starting from initial global state and going into a desirable final state(s) of the production system. The objective of the job scheduling policy is minimizing the cycle time of the last job scheduled in the pipeline of a given family of jobs. Three heuristic scheduling methods have been implemented. First, a sub-optimal sequence of jobs to be scheduled is generated. Second, a Petri net-based simulator with graphical user interface to monitor execution of the sequence of tasks on machines is dynamically designed. A deterministic t-timed colored Petri net model has been developed and implemented for flexible manufacturing systems (FMS). An execution of the deterministic timed Petri net into a reachability graph allows to compute performance measures by applying graph traversing algorithms starting from initial global state to a desirable final state(s) of the production system.     

A job-shop problem with one additional resource type

We consider a job-shop scheduling problem with n jobs and the constraint that at most p<n jobs can be processed simultaneously. This model arises in several manufacturing processes, where each operation has to be assisted by one human operator and there are p (versatile) operators. The problem is binary NP-hard even with n=3 and p=2. When the number of jobs is fixed, we give a pseudopolynomial dynamic programming algorithm and a fully polynomial time approximation scheme (FPTAS). We also propose an enumeration scheme based on a generalized disjunctive graph, and a dynamic programming-based heuristic algorithm. The results of an extensive computational study for the case with n=3 and p=2 are presented.     

Permutation flowshop problems with bi-criterion makespan and total completion time objective and position-weighted learning effects

In this paper, we study the problem of minimizing the weighted sum of makespan and total completion time in a permutation flowshop where the processing times are supposed to vary according to learning effects. The processing time of a job is a function of the sum of the logarithms of the processing times of the jobs already processed and its position in the sequence. We present heuristic algorithms, which are modified from the optimal schedules for the corresponding single machine scheduling problem and analyze their worst-case error bound. We also adopt an existing algorithm as well as a branch-and-bound algorithm for the general m-machine permutation flowshop problem. For evaluation of the performance of the algorithms, computational experiments are performed on randomly generated test problems.     

Optimal on-line algorithms for the uniform machine scheduling problem with ordinal data

In this paper, we consider an ordinal on-line scheduling problem. A sequence of n independent jobs has to be assigned non-preemptively to two uniformly related machines. We study two objectives which are maximizing the minimum machine completion time, and minimizing the l_p norm of the completion times. It is assumed that the values of the processing times of jobs are unknown at the time of assignment. However it is known in advance that the processing times of arriving jobs are sorted in a non-increasing order. We are asked to construct an assignment of all jobs to the machines at time zero, by utilizing only ordinal data rather than actual magnitudes of jobs. For the problem of maximizing the minimum completion time we first present a comprehensive lower bound on the competitive ratio, which is a piecewise function of machine speed ratio s. Then, we propose an algorithm which is optimal for any s ⩾ 1. For minimizing the l_p norm, we study the case of identical machines (s = 1) and present tight bounds as a function of p.