共查询到18条相似文献,搜索用时 78 毫秒
1.
1 引言
欧美一些国家调度主站与变电站RTU的通信已逐步采用以太数据网.为此,国际电工委员会(IEC)第57技术委员会(TC57)的第3工作组(WG03)于1998年8月制定了IEC60870-5-104标准(CDV).IEC60870-5-104协议的名称为“用标准传送文件集的IEC60870-5-101网络访问”.此协议是将IEC60870-5-101标准用于TCP/IP网络.当调度主站与变电站连接到以太数据网,变电站RTU与调度主站通信时,通信规约则应采用IEC60870-5-104标准. 相似文献
2.
随着电力系统自动化与计算机网络通讯的不断发展,远动规约也在不断变化和发展,根据国际电工委员会制定的IEC60870-5-101和IEC60870-5-104远动规约,我国已经制定了相应的配套标准DL/T634-1997和DL/T634.5104-2002。其中IEC-60870-5-104作为采用标准传输协议子集的IEC60870-5-101的网络访问。文章讨论了采用IEC60870-5-101/104的必要性,介绍了一体化LCU的通讯结构,详细叙述了规约在生态小水电一体化LCU中的通讯实施过程,说明IEC60870-5-101/104两个国际标准,是能满足各种数据类型的传输和保证通信可靠性的方案,给通信数据的处理带来极大的方便。 相似文献
3.
本文分析了IEC60870-5-101远动规约遵循的传输规则、帧格式和参考模型,详细介绍了该规约在电网监控培训系统中的设计和应用。 相似文献
4.
本文分析了IEC60870-5-101远动规约遵循的传输规则、帧格式和参考模型,详细介绍了该规约在电网监控培训系统中的设计和应用. 相似文献
5.
6.
本文简要介绍了IEC 60870-5-103规约及DeviceNet现场总线的相关知识,设计并实现了IEC 60870-5-103规约与DeviceNet总线间的协议转换,完成了二者间的通信. 相似文献
7.
基于IEC60870-5-104远动规约的通信技术在电厂SIS系统中的应用 总被引:1,自引:0,他引:1
介绍了国际电工委员会(IEC)制定的IEC60870-5-104远动规约.详细阐述了该规约的网络参考模型和通信实施过程.根据工程实践,介绍了基于IEC104规约的网络通信技术在远动终端和SIS系统之间的应用.最后展望了该通信技术在火电厂SIS系统中的广泛应用前景. 相似文献
8.
9.
10.
IEC 60870系列标准在我国已广泛应用,为了满足对一致性测试的要求,IEC 60870-5-6和IEC 61850第10部分:一致性测试两个关于变电站通信协议一致性标准正式颁布。本系统就是基于一致性测试标准,设计并实现了用于一致性测试的系统工具,介绍了它的动态模型、软件结构和测试环境。该系统可以进行自动协议判断、自动译码和最大限度的自动完成一致性测试。 相似文献
11.
IEC61131-3是工业控制系统编程语言的第一套国际标准。介绍了IEC61131-3国际标准的产生、发展和特点,从程序组织单位组成及内容、编程语言等方面详细地阐述了IEC61131-3的软件开发平台,讨论了使用该标准构建控制系统的语言模式。最后以电梯控制为例阐述了使用IEC61131-3控制系统的组态和编程步骤。通过运行证明,系统较好地模拟了电梯的实际运行过程,体现了IEC61131-3标准的特点和优势。 相似文献
12.
介绍了IEC61131-3标准的产生、现状和发展,描述了国际对该标准的使用情况以及在国内推广、实施该标准的意义。以SunyTech工控软件为背景,对标准的具体内容作了详细阐述,同时通过与传统编程语言比较,展现该标准的特点和优势。结合一个实际的应用实例,体现了符合IEC61131.3标准的编程系统的优势。 相似文献
13.
14.
15.
IEC61131-3是可编程序控制器编程语言的国际标准,本文阐述了该标准的主要内容和应用优势,以及在具体工程项目实施中如何将IEC61131-3标准用于聚丙烯风送控制系统的模块化设计与模块化编程。 相似文献
16.
The IEC 61499 standard has been developed to allow the modeling and design of distributed control systems, providing advanced concepts of software engineering (such as abstraction and encapsulation) to the world of control engineering. The introduction of this standard in already existing control environments poses challenges, since programs written using the widespread IEC 61131-3 programming standard cannot be directly executed in a fully IEC 61499 environment without reengineering effort. In order to solve this problem, this paper presents an architecture to integrate modules of the two standards, allowing the exploitation of the benefits of both. The proposed architecture is based on the coexistence of control software of the two standards. Modules written in one standard interact with some particular interfaces that encapsulate functionalities and information to be exchanged with the other standard. In particular, the architecture permits to utilize available run-times without modification, it allows the reuse of software modules, and it utilizes existing features of the standards. A methodology to integrate IEC 61131-3 modules in an IEC 61499 distributed solution based on such architecture is also developed, and it is described via a case study to prove feasibility and benefits. Experimental results demonstrate that the proposed solution does not add substantial load or delays to the system when compared to an IEC 61131-3 based solution. By acting on task period, it can achieve performances similar to an IEC 61499 solution. 相似文献
17.
介绍了嵌入式TCP/IP协议LwIP、IEC 61131-3国际标准,设计了基于AT91M55800A微处理器和IEC 61131-3标准的嵌入式实时控制系统,并实现了对三溶液位的控制。 相似文献