Glassy carbon electrode modified with a bilayer of multi-walled carbon nanotube and polypyrrole doped with new coccine: Application to the sensitive electrochemical determination of Sumatriptan

A promising electrochemical sensor was developed based on a layer by layer process by electro-polymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the multi-walled carbon nanotubes (MWCNTs) pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The electrochemical behavior of SUM was investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results showed a remarkable increase (∼12 times) in the anodic peak current of SUM in comparison to the bare GCE. The effect of experimental variables such as, drop size of the casted MWCNTs suspension, pH of the supporting electrolyte, accumulation conditions and the number of cycles in the electro-polymerization process on the electrode response was investigated. Under the optimum conditions, the modified electrode showed a wide linear dynamic range of 0.02–10.0 μmol L⁻¹ with a detection limit of 6 nmol L⁻¹ for the voltammetric determination of SUM. The prepared electrode showed high sensitivity, stability and good reproducibility in response to SUM. This sensor was successfully applied for the accurate determination of trace amounts of SUM in pharmaceutical and clinical preparations.     

Study of nimesulide and its determination using multiwalled carbon nanotubes modified glassy carbon electrodes

A new method for the determination of nimesulide was established based on the multiwalled carbon nanotubes (MWCNTs) modified glassy carbon electrode (MWCNTs/GCE). In 0.2 M PBS (pH 6.6) buffer solution, the MWCNTs/GCE showed a remarkable catalytic and enhancement effect on reduction of the nimesulide. The reduction peak potential of nimesulide shifted positively from −0.665 V at bare GCE to −0.553 V at MWCNTs/GCE, and the sensitivity increased ca. 7 times. A linear dynamic range of 3.2 × 10⁻⁷-6.5 × 10⁻⁵ M (R = 0.9992) with a detection limit of 1.6 × 10⁻⁷ M was obtained. The electrochemical behaviors of nimesulide were studied and electron-transfer coefficient (α = 0.45), proton number (X = 1) and electron-transfer number (n = 2) have been determined. This method has been used to determine the content of nimesulide in medical tablets. The recovery was determined to be 93.2-106.2% by means of standard addition method. Compared with UV-vis spectrometry, the method was not remarkable difference.     

Polyaniline Langmuir-Blodgett film modified glassy carbon electrode as a voltammetric sensor for determination of Ag ions

A highly sensitive electrochemical sensor made of a glassy carbon electrode (GCE) coated with a Langmuir-Blodgett film (LB) containing polyaniline (PAn) doped with p-toluenesulfonic acid (PTSA) (LB/PAn-PTSA/GCE) has been used for the detection of trace concentrations of Ag⁺. UV-vis absorption spectra indicated that the PAn was doped by PTSA. The surface morphology of the PAn LB film was characterized by atomic force microscopy (AFM). The electrochemical properties of this LB/PAn-PTSA/GCE were studied using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The LB/PAn-PTSA/GCE was used as a voltammetric sensor for determination of trace Ag⁺ at pH 5.0 using linear scanning stripping voltammetry. Under the optimal experimental conditions, the stripping current was proportional to the Ag⁺ concentration over the range from 6.0 × 10⁻¹⁰ mol L⁻¹ to 1.0 × 10⁻⁶ mol L⁻¹, with a detection limit of 4.0 × 10⁻¹⁰ mol L⁻¹. The high sensitivity, selectivity, and stability of this LB/PAn-PTSA/GCE also demonstrated its practical utility for simple, rapid and economical determination of Ag⁺ in water samples.     

Electrochemical detection of avian influenza virus H5N1 gene sequence using a DNA aptamer immobilized onto a hybrid nanomaterial-modified electrode

A sensitive electrochemical method for the detection of avian influenza virus (AIV) H5N1 gene sequence using a DNA aptamer immobilized onto a hybrid nanomaterial-modified electrode was developed. To enhance the selectivity and sensitivity, the modified electrode was assembled with multi-wall carbon nanotubes (MWNT), polypyrrole nanowires (PPNWs) and gold nanoparticles (GNPs). This electrode offered a porous structure with a large effective surface area, highly electrocatalytic activities and electronic conductivity. Therefore, the amount of DNA aptamer immobilized onto the electrode was increased while the accessibility of the detection target was maintained. The biosensor is based on the hybridization and preferred orientation of a DNA aptamer immobilized onto a modified electrode surface with its target (H5N1 specific sequence) present in solution. It is selective for the H5N1 specific sequence, and the signal of the indicator was approximately linear to log(concentration) of the H5N1 specific sequence from 5.0 × 10⁻¹² to 1.0 × 10⁻⁹ M (R = 0.9863) with a detection limit of 4.3 × 10⁻¹³ M. These studies showed that the new hybrid nanomaterial (MWNT/PPNWs/GNPs) and the DNA aptamer could be used to fabricate an electrochemical biosensor for gene sequence detection. Furthermore, this design strategy is expected to have extensive applications in other biosensors.     

Electrochemical determination of bromide at a multiwall carbon nanotubes-chitosan modified electrode

A multiwall carbon nanotubes (MWNTs)-chitosan modified glassy carbon electrode (GCE) exhibits attractive ability for highly sensitive cathodic stripping voltammetric measurements of bromide (Br⁻). In pH 1.8 H₂SO₄ solution, a substantial increase in the stripping peak current of Br⁻ (compared to bare GCE and chitosan modified GCE) is observed using MWNTs-chitosan modified electrode. Operational parameters were optimized and the electrochemical behaviors of Br⁻ were studied by different electrochemical methods. The kinetics parameters were measured, the number of electron transfer (n) was 1 and the transfer coefficient (α) is 0.17. A wide linear calibration range (3.6 × 10⁻⁷-1.4 × 10⁻⁵ g mL⁻¹) was achieved, with a detection limit of 9.6 × 10⁻⁸ g mL⁻¹. The mechanism of electrode reaction was fully discussed.     

Electrochemical detection of hydroquinone by graphene and Pt-graphene hybrid material synthesized through a microwave-assisted chemical reduction process

We have synthesized graphene and Pt-graphene hybrid material by a microwave-assisted chemical reduction process and evaluated their application as electrode materials towards the electrochemical detection of hydroquinone. Graphene modified glass carbon electrode (GCE) showed a good performance for detecting hydroquinone due to the unique properties of graphene which increased the active surface area of the electrode and accelerated the electron transfer. The linear detection range of hydroquinone concentration was 20–115 μM with a sensitivity of 1.38 μA μM⁻¹ cm⁻²; the detection limit was estimated to be 12 μM (S/N = 3). The electrocatalytic activity of the Pt-graphene modified GCE was further improved due to the enhanced electron transfer and the linear detection range was 20–145 μM with the sensitivity of 3.56 μA μM⁻¹ cm⁻², detection limit 6 μM (S/N = 3).     

DNA hybridization biosensor using chitosan–carbon nanotubes composite film as an immobilization platform and [Cu(bpy)(MBZ)2(H2O)] (bpy = 2,2′-bipyridine, MBZ = p-methylbenzoate) as a novel redox indicator

In this paper, a new DNA hybridization detection strategy was developed based on the immobilization of capture probe DNA on a chitosan (CS)–carbon nanotubes (CNTs) composite modified glassy carbon electrode (CS–CNTs/GCE) and the use of a copper complex, [Cu(bpy)(MBZ)₂(H₂O)] (bpy = 2,2′-bipyridine, MBZ = p-methylbenzoate), as a new redox hybridization indicator. The electrochemical characterization experiments showed that the nanocomposite film of CS–CNTs could effectively immobilize the capture probe DNA and greatly improve the electron-transfer reactions of the electroactive molecules. Electrochemical and fluorescent spectroscopic analysis revealed that the polypyridyl copper complex of [Cu(bpy)(MBZ)₂(H₂O)] bound to DNA via a typical intercalation mode. Surface studies further showed that the copper complex can discriminate between double-stranded and single-stranded DNA that immobilized on the surface of CS–CNTs/GCE. When being utilized as a redox indicator for the detection of hybridization for short DNA species related to phosphinothricin acetyltransferase (PAT), the indicator showed good specificity for recognizing the complementary, three-base mismatched and non-complementary DNA. Under the optimized conditions, the oxidation peak currents of the copper complex enhanced linearly with increases in the concentration of the complementary sequence in the range from 5.0 × 10⁻¹⁰ to 1.0 × 10⁻⁸ M. A detection limit of 5.0 × 10⁻¹⁰ M was also obtained based on the constructed DNA biosensor.     

一步法电沉积制备纳米金/碳纳米管修饰电极及对邻苯二酚电催化性能研究

以羧基化碳纳米管(CNT-COOH)溶液作为支持电解质,采用多电位阶跃电沉积方法将CNTs和纳米金同步直接沉积到玻碳电极表面,制备了对邻苯二酚(CAT)具有很高的电催化氧化作用的纳米金-碳纳米管修饰电极(Au/CNTs/GCE),其催化效果强于单独的金纳米粒子或碳纳米管修饰电极。通过优化沉积时间、pH和扫速对修饰电极的影响,并考察了在最佳条件下CAT在Au/CNTs/GCE修饰电极上的电化学行为,发现CAT在该修饰电极上发生可逆的氧化还原反应,响应电流与浓度在4.0×10-6～8.0×10-5mol/L和1.0×10-4～1.0×10-3mol/L范围内呈线性关系,相关系数分别为0.9996和0.9985,检出限为4.5×10-7mol/L(S/N)。     

Direct electrochemistry of guanosine on multi-walled carbon nanotubes modified carbon ionic liquid electrode

A multi-walled carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was fabricated and used to investigate the electrochemical behavior of guanosine. CILE was prepared by mixing hydrophilic ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄), graphite powder and liquid paraffin together. The fabricated MWCNTs/CILE showed great electrocatalytic ability to the oxidation of guanosine and an irreversible oxidation peak appeared at 1.067 V (vs. SCE) with improved peak current. The electrochemical behavior of guanosine on the MWCNTs/CILE was carefully studied by cyclic voltammetry and the electrochemical parameters such as the charge transfer coefficient (α) and the electrode reaction standard rate constant (k_s) were calculated with the result as 0.66 and 2.94 × 10⁻⁴ s⁻¹, respectively. By using differential pulse voltammetry (DPV) as the detection method, a linear relationship was obtained between the oxidation peak current and the guanosine concentration in the range from 1.0 × 10⁻⁷ to 4.0 × 10⁻⁵ mol/L with the detection limit as 7.8 × 10⁻⁸ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine detection and the modified electrode showed good ability to distinguish the electrochemical response of guanosine and adenosine.     

Electrochemical sensing based on graphene oxide/Prussian blue hybrid film modified electrode

A novel graphene oxide (GO)/Prussian blue (PB) hybrid film was constructed by electropolymerizing Prussian blue onto the GO modified glassy carbon electrode, and its electrochemical behaviors were studied. Raman spectra were used to investigate the successful formation of the GO/PB hybrid film. Electrochemical experiments showed that the graphene oxide greatly enhanced electrochemical reactivity of the PB. Moreover, a much higher Prussian blue (PB) loading (6.388 × 10⁻⁸ mol cm⁻²) is obtained as compared to the bare glass carbon surface (3.204 × 10⁻⁹ mol cm⁻²). The GO/PB hybrid film modified electrode was used for the sensitive detection of hydrogen peroxide. The sensor exhibited a wide linearity range from 5.0 × 10⁻⁶ to 1.2 × 10⁻³ M with a detection limit of 1.22 × 10⁻⁷ M (S/N = 3), high sensitivity of 408.7 μA mM⁻¹ cm⁻² and good reproducibility. Furthermore, with glucose oxidase (GOD) as a model, the GO/PB/GOD/chitosan composite-modified electrode was also constructed.The resulting biosensor exhibited good amperometric response to glucose with linear range from 0.1 to 13.5 mM at 0.1 V, good reproducibility and detection limit of 3.43 × 10⁻⁷ M (S/N = 3). In addition, the biosensor presented high selectivity and long-term stability. Therefore, the PB/GO hybrid films-based modified electrode may hold great promise for electrochemical sensing and biosensing applications.     

Development of nonenzymatic hydrogen peroxide sensor based on catalytic properties of copper nanoparticles/Rutin/MWCNTs/IL/Chit

A new electrochemical sensor based on copper nanoparticles for detection of hydrogen peroxide has been developed. Copper nanoparticles/Rutin/Multiwall Carbon Nanotubes/Ionic liquid/Chitosan modified glassy carbon electrode (CuNPs/Rutin/MWCNTs/IL/Chit/GCE) prepared by consecutive coating of MWCNTs/IL/Chit nanocomposite and rutin on the GCE, followed by the electrodeposition of copper. Surface physical characteristics of modified electrode were studied by scanning electron microscopy (SEM). The electrochemical performance of the sensor for detection of H₂O₂ was investigated by cyclic voltammetry and chronoamperometry techniques. The modified electrode exhibits an enhanced electrocatalytic property, low working potential, high sensitivity, excellent selectivity, good stability, and fast amperometric sensing towards reduction of hydrogen peroxide. The response to H₂O₂ is linear in the range between 0.35 μM to 2500 μM, and the detection limit is 0.11 μM.     

Layer-by-layer construction of multi-walled carbon nanotubes, zinc oxide, and gold nanoparticles integrated composite electrode for nitrite detection

A novel composite electrode of Au/ZnO/MWCNTs/GC has been constructed for the electrochemical detection of nitrite, where ZnO thin film and Au nanoparticles are electrodeposited through layer-by-layer onto MWCNTs/GC substrate. The resulting electrode is characterized by scanning electron microscopy and energy-dispersed X-ray spectroscopy. Its electrocatalytic activity toward the electro-oxidation of nitrite has been examined and compared to various modified electrodes, including MWCNTs/GC, Au/ZnO/GC, Au/MWCNTs/GC, and ZnO/MWCNTs/GC via cyclic voltammetry. The electrodeposition time for ZnO and the Au loading amount together with the solution pH are investigated to achieve optimal conditions for the electrode fabrication and nitrite detection. Linear relationship between current response and nitrite concentration is observed in the range from 7.8 × 10⁻⁷ to 4.0 × 10⁻⁴ M and the limit of the detection is 4.0 × 10⁻⁷ M (S/N = 3). The influence of various anions and cations on the nitrite detection has been studied. The proposed method is also employed for the determination of nitrite in real samples.     

Electrochemical behavior of catechol, resorcinol and hydroquinone at graphene–chitosan composite film modified glassy carbon electrode and their simultaneous determination in water samples

Graphene–chitosan composite film modified glassy carbon electrode was prepared and characterized. The fabricated electrode showed excellent electrochemical catalytic activities towards the oxidation of catechol (CT), resorcinol (RS) and hydroquinone (HQ). The oxidation overpotentials of CT, RS and HQ decreased significantly and the corresponding oxidation currents increased remarkably compared with those obtained at the bare GCE and chitosan modified GCE. Some kinetic parameters, such as the electron transfer number (n), proton transfer number (m), charge transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s), were calculated. Differential pulse voltammetry was used for the simultaneous determination of CT, RS and HQ in their ternary mixture. The peak-to-peak potential separations between CT and RS, RS and HQ, and HQ and CT were 0.388, 0.484 and 0.096 V, respectively. The calibration curves for CT, RS and HQ were obtained in the range of 1 × 10⁻⁶ to 4 × 10⁻⁴, 1 × 10⁻⁶ to 5.5 × 10⁻⁴ and 1 × 10⁻⁶ to 3 × 10⁻⁴ mol L⁻¹, respectively. The detection limits were 7.5 × 10⁻⁷ mol L⁻¹ (S/N = 3).     

A DNA electrochemical sensor with poly-l-lysine/single-walled carbon nanotubes films and its application for the highly sensitive EIS detection of PAT gene fragment and PCR amplification of NOS gene

A sensitive and novel DNA electrochemical biosensor for the detection of the transgenic plants gene fragment by electrochemical impedance spectroscopy (EIS) was presented. The well-dispersed carboxylic group-functionalized single-walled carbon nanotubes (SWNTs) were dripped onto the carbon paste electrode (CPE) surface firstly, and poly-l-lysine films (pLys) were subsequently electropolymerized by cyclic voltammetry (CV) to prepare pLys/SWNTs/CPE. The morphology of pLys/SWNTs films was examined using a field emission scanning electron microscope (SEM). The pLys/SWNTs films modified electrode exhibited very good conductivity. DNA probes were easily immobilized on the poly-l-lysine films via electrostatic adsorption. The hybridization events were monitored with electrochemical impedance spectroscopy using [Fe(CN)₆]^3−/4− as indicator. The PAT gene fragment from phosphinothricin acetyltransferase gene was detected by this DNA electrochemical sensor. The dynamic detection range of this sensor to the PAT gene fragment was from 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ mol/L. A detection limit of 3.1 × 10⁻¹³ mol/L could be estimated. The PCR amplification of NOS gene from the sample of a kind of transgenic modified bean was also detected satisfactorily by EIS.     

Fabrication of Naphthol green B/layered double hydroxide nanosheets ultrathin film and its application in electrocatalysis

A facile enzyme-free hydrogen peroxide electrochemical sensor was fabricated based on multilayer ultrathin film containing Naphthol green B anions (NGB) and exfoliated nanosheets of Co–Al layered double hydroxide (LDH) via layer-by-layer self-assembly technique. The X-ray diffraction pattern indicates the superlattice structure of the film with repeating distance of 4.15 nm; SEM and AFM images show that the film surface is continuous and uniform. The electrochemical behavior of the ultrathin film was studied by cyclic voltammetry and electrochemical impedance spectroscopy. The ultrathin film modified electrode shows a fast direct electron transfer for the Co²⁺/Co³⁺ redox couple with ΔE = 14 mV in 0.1 M NaOH solution. Furthermore, the modified electrode displays a significant electrocatalytic performance for H₂O₂ with Michaelis–Menten constant . The anodic peak current increased linearly with the concentration of H₂O₂ from 8.0 × 10⁻⁶ to 1.8 × 10⁻⁴ M with a low detection limit of 9.0 × 10⁻⁷ M. The NGB/LDH ultrathin film was demonstrated as a feasible electrochemical sensor for detection of H₂O₂ with rapid response, high stability, good reproducibility and excellent selectivity.     

Studies on the electrochemical behavior of 3-nitrobenzaldehyde thiosemicarbazone at glass carbon electrode modified with nano-γ-Al2O3

Nano-γ-Al₂O₃ is dispersed onto the glass carbon electrode (GCE) by polishing. This nanostructured modified GCE exhibits a great enhancement to the redox responses of 3-nitrobenzaldehyde thiosemicarbazone (3-NBT). In comparison with bare GCE, 3-NBT gives a more sensitive voltammetric response because of the nanoparticle’s unique properties. The lowest detectable concentration (3σ) of 3-NBT is estimated to be 1.18 × 10⁻⁶ M (accumulation for 4 min). The linear relationship between peak current and concentration of 3-NBT holds in the range 1.0 × 10⁻⁵ M to 1.0 × 10⁻⁴ M (r = 0.9981). The electrochemical properties of 3-NBT on this modified electrode have been investigated with various electrochemical methods. The results indicate that the transference of one electron and one proton involves electrode radical reaction processes I and II, respectively. The coverage value (Γ) of 1.62 × 10⁻⁹ mol cm⁻² was calculated and the electrochemical parameters, diffusion coefficient D (2.54 × 10⁻³ cm² s⁻¹, 2.03 × 10⁻³ cm² s⁻¹) and reaction rate constant k_s (5.9573 s⁻¹, 7.15 × 10⁻² cm s⁻¹) were obtained for quasi-reversible system I and irreversible system II, respectively.     

Deposition of new thia-containing Schiff-base iron (III) complexes onto carbon nanotube-modified glassy carbon electrodes as a biosensor for electrooxidation and determination of amino acids

Multiwall carbon nanotubes (MWCNTs) were used as an immobilization matrix to incorporate an Fe (III)–Schiff base complex as an electron-transfer mediator onto a glassy carbon electrode surface. First, the preheated glassy carbon was subjected to abrasive immobilization of MWCNTs by gently rubbing the electrode surface on filter paper supporting the carbon nanotubes. Second, the electrode surface was modified by casting 100 μL of an Fe (III)-complex solution (0.01 M in ACN). The cyclic voltammograms of the modified electrode in an aqueous solution displayed a pair of well-defined, stable and nearly reversible reductive oxidation redox systems with surface confined characteristics. Combinations of unique electronic and electrocatalytic properties of MWCNTs and Fe (III)–Schiff base complexes resulted in a remarkable synergistic augmentation of the response. The electrochemical behavior and stability of the modified electrode in aqueous solutions at pH 1–9 were characterized by cyclic voltammetry. The apparent electron transfer rate constant (K_s) and transfer coefficient (a) were determined by cyclic voltammetry and were approximately 7 s⁻¹ and 0.55, respectively. The modified electrodes showed excellent catalytic activity towards the oxidation of amino acids at an unusually positive potential in acidic solution. They also displayed inherent stability at a wide pH range, fast response time, high sensitivity, low detection limit and had a remarkably positive potential oxidation of amino acids that decreased the effect of interferences in analysis. The linear concentration range, limits of detection (LOD), limits of quantization (LOQ) and relative standard deviation of the proposed sensor for the amino acid detection were 1–55,000, 1.10–13.70, 2.79–27.14 and 1.30–5.11, respectively.     

Functionalized carbon nanotube-bienzyme biocomposite for amperometric sensing

An approach to design a biocomposite bienzyme biosensor with the aim of evaluating its suitability as an amperometric sensor using functionalized multiwalled carbon nanotubes (MWCNTs) is presented. The biosensor is based on a bienzyme-channelling configuration, employing the enzymes glucose oxidase (GOx) and horseradish peroxidase (HRP), which were immobilized with toluidine blue (TB) functionalized MWCNTs. The proposed method demonstrates an easy electron transfer between the immobilized enzymes and the electrode via functionalized MWCNTs in a Nafion matrix. Co-immobilization of GOx and HRP was employed to establish the feasibility of fabricating highly effective bienzyme-based biosensors for low-level glucose determination. Bienzyme immobilized TB functionalized MWCNTs were attached to a glassy carbon electrode, and the electrochemical behavior of the sensor was studied using electrochemical impedance spectroscopy, cyclic voltammetry and chronoamperometry. The excellent electrocatalytic activity of the biocomposite film resulted in the detection of glucose under reduced over potential with a wider range of determination from 1.5 × 10⁻⁸ M to 1.8 × 10⁻³ M and with a detection limit of 3 × 10⁻⁹ M. The sensor showed a short response time (within 2 s), good stability and anti-interferant ability. The proposed biosensor exhibits good analytical performance in terms of repeatability, reproducibility and shelf-life stability.     

A novel DNA biosensor based on ssDNA/Cyt c/l-Cys/GNPs/Chits/GCE

A novel DNA biosensor was fabricated by modified multilayer of ssDNA, cytochrome c, l-cysteine, metal gold nanoparticles and Chitosan (denoted as ssDNA/Cyt c/l-Cys/GNPs/Chits/GCE). The behavior of the DNA biosensor was then investigated by voltammetry, impedance spectrum and atomic force microscope (AFM), and the morphologic differences among each layer of the DNA biosensor were also observed. Results revealed that two well-defined redox peaks exhibited at 0.120 V and 0.362 V, and the amount of adsorbed DNA was 1.672 × 10⁻¹⁰ mol cm⁻². We concluded that the modified electrode could be used to detect DNA with the indicator daunomycin.     

Novel bismuth/multi-walled carbon nanotubes-based electrochemical sensor for the determination of neuroprotective drug cilostazol

A very sensitive electrochemical sensor has been developed by modification of glassy carbon electrode (GCE) with nanoparticles of bismuth (III) oxide (Bi₂O₃) and multi-walled carbon nanotubes (MWCNTs). The sensor was applied for the determination of cilostazol, cyclic nucleotide phosphodiesterase inhibitors in pharmaceutical formulation and human plasma. The voltammetric responses were compared with those obtained at bare GCE under optimum conditions. The cyclic and square-wave voltammograms of cilostazol showed 3.3 and 4.9 times enhancement in the oxidation peak current at MWCNTs–Bi₂O₃/GCE as compared to a bare GCE. Bi₂O₃–MWCNTs/GCE showed a linear response for cilostazol in standard solution over the concentration range of 0.8–13 μg mL⁻¹ with the detection limit 0.76 μg mL⁻¹, whereas human plasma over the concentration range 0.8–12.5 μg mL⁻¹ with the detection limit 0.66 μg mL⁻¹.