Highly Emissive,Water‐Repellent,Soft Materials: Hydrophobic Wrapping and Fluorescent Plasticizing of Conjugated Polyelectrolyte via Electrostatic Self‐Assembly

Sulfonated poly(diphenylacetylene) (SPDPA) is used as an anionic conjugated polyelectrolyte to examine stoichiometric electrostatic self‐assembly with homologous cationic surfactants (octadecyl)_X(methyl)_Y ammonium bromides (O_XM_YABs) having different numbers of long hydrophobic tails. The SPDPA–O_XM_YAB complexes formed show significantly increased water contact angle and enhanced fluorescence (FL) emissions compared with the pristine SPDPA. The complexes exist in a gum state at room temperature owing to the plasticizer effect of the hydrophobic tails, hence they are very soft and highly stretchable. The hydrophobicity, softness, and FL quantum efficiency of the SPDPA–O_XM_YAB complexes increase as the number of hydrophobic tails increases. SPDPA adsorbs uniformly onto filter papers to produce fluorescent papers. The SPDPA‐adsorbed papers have many unique applications, including FL image writing, fingerprinting, stamping, and inkjet printing using the surfactant solutions as an ink to reveal high‐resolution FL images. In particular, multideposit inkjet‐printing using SPDPA and O_XM_YAB solutions as inks produces water‐resistant, embedded figures in paper currency.     

Optimization of the Power Conversion Efficiency of Room Temperature‐Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer

The utilization of a conjugated polyelectrolyte‐ionic liquid crystal (CPE‐ILC) complex as electron transporting layer (ETL) to improve the compatibility between the ITO and hydrophobic active layer and to promote the dipole orientation at cathode interface is reported. Simultaneously, a hole transporting layer (HTL) of solution processed tungsten oxide together with poly(2,6‐bis(trimethyltin)‐4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐4,6‐Dibromo‐thieno[3,4‐b]thiophene‐2‐carboxylic acid 2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl ester) (PBDTT‐TT‐TEG) efficiently shifts the work function of Ag electrode in this device. The interfacial modification of these interlayers achieves energy alignment at both electrodes. The power conversion efficiency (PCE) of the PSC based on ITO/PFN‐CbpSO/PBDTTT‐C‐T:PC₇₀BM/PBDTT‐TT‐TEG/WO₃/Ag with solution processed interlayers reaches to 7.8%. It is worthy to note that except for the electrodes, all layers of device are fabricated by solution process at room temperature and without annealing. In the case of incorporating ZnO layer into this device, the device efficiency further increases to 8.5%, which is the best value reported from PBDTTT‐C‐T:PC₇₀BM‐based solar cells with solution processed interlayers at both electrodes so far.     

Self‐Doping Fullerene Electrolyte‐Based Electron Transport Layer for All‐Room‐Temperature‐Processed High‐Performance Flexible Polymer Solar Cells

To achieve high‐performance large‐area flexible polymer solar cells (PSCs), one of the challenges is to develop new interface materials that possess a thermal‐annealing‐free process and thickness‐insensitive photovoltaic properties. Here, an n‐type self‐doping fullerene electrolyte, named PCBB‐3N‐3I, is developed as electron transporting layer (ETL) for the application in PSCs. PCBB‐3N‐3I ETL can be processed at room temperature, and shows excellent orthogonal solvent processability, substantially improved conductivity, and appropriate energy levels. PCBB‐3N‐3I ETL also functions as light‐harvesting acceptor in a bilayer solar cell, contributing to the overall device performance. As a result, the PCBB‐3N‐3I ETL‐based inverted PSCs with a PTB7‐Th:PC₇₁BM photoactive layer demonstrate an enhanced power conversion efficiency (PCE) of 10.62% for rigid and 10.04% for flexible devices. Moreover, the device avoids a thermal annealing process and the photovoltaic properties are insensitive to the thickness of PCBB‐3N‐3I ETL, yielding a PCE of 9.32% for the device with thick PCBB‐3N‐3I ETL (61 nm). To the best of one's knowledge, the above performance yields the highest efficiencies for the flexible PSCs and thick ETL‐based PSCs reported so far. Importantly, the flexible PSCs with PCBB‐3N‐3I ETL also show robust bending durability that could pave the way for the future development of high‐performance flexible solar cells.     

Water‐Soluble Triazolium Ionic‐Liquid‐Induced Surface Self‐Assembly to Enhance the Stability and Efficiency of Perovskite Solar Cells

Despite being a promising candidate for next‐generation photovoltaics, perovskite solar cells (PSCs) exhibit limited stability that hinders their practical application. In order to improve the humidity stability of PSCs, herein, a series of ionic liquids (ILs) “1‐alkyl‐4‐amino‐1,2,4‐triazolium” (termed as RATZ; R represents alkyl chain, and ATZ represents 4‐amino‐1,2,4‐triazolium) as cations are designed and used as additives in methylammonium lead iodide (MAPbI₃) perovskite precursor solution, obtaining triazolium ILs‐modified PSCs for the first time (termed as MA/RATZ PSCs). As opposed to from traditional methods that seek to improve the stability of PSCs by functionalizing perovskite film with hydrophobic molecules, humidity‐stable perovskite films are prepared by exploiting the self‐assembled monolayer (SAM) formation of water‐soluble triazolium ILs on a hydrophilic perovskite surface. The mechanism is validated by experimental and theoretical calculation. This strategy means that the MA/RATZ devices exhibit good humidity stability, maintaining around 80% initial efficiency for 3500 h under 40 ± 5% relative humidity. Meanwhile, the MA/RATZ PSCs exhibit enhanced thermal stability and photostability. Tuning the molecule structure of the ILs additives achieves a maximum power conversion efficiency (PCE) of 20.03%. This work demonstrates the potential of using triazolium ILs as additives and SAM and molecular design to achieve high performance PSCs.     

Self‐Assembly of Semiconducting Polymer Amphiphiles for In Vivo Photoacoustic Imaging

Despite the advantages of semiconducting polymer nanoparticles (SPNs) over other inorganic nanoparticles for photoacoustic (PA) imaging, their synthetic method is generally limited to nanoprecipitation, which is likely to cause the issue of nanoparticle dissociation. The synthesis of near‐infrared (NIR) absorbing semiconducting polymer amphiphiles (SPAs) that can spontaneously self‐assemble into homogeneous nanoparticles for in vivo PA imaging is reported. As compared with their counterpart nanoparticles (SPN1) prepared through nanoprecipitation, SPAs generally have higher fluorescence quantum yields but similar size and PA brightness, making them superior over SPN1. Optical and simulation studies reveal that the poly(ethylene glycol) (PEG) grafting density plays a critical role in determining the packing of SP segments inside the core of nanoparticles, consequently affecting the optical properties. The small size and structurally stable nanostructure, in conjunction with a dense PEG shell, allow SPAs to passively target tumors of living mice after systemic administration, permitting both PA and fluorescence imaging of the tumors at signals that are ≈1.5‐fold higher than that of liver. This study thus not only provides the first generation of amphiphilic optically active polymers for PA imaging, but also highlights the molecular guidelines for the development of organic NIR imaging nanomaterials.     

Effects of Short‐Axis Alkoxy Substituents on Molecular Self‐Assembly and Photovoltaic Performance of Indacenodithiophene‐Based Acceptors

The effects of central alkoxy side chain length of a series of narrow bandgap small molecule acceptors (SMAs) on their physicochemical properties and on the photovoltaic performance of the SMA‐based polymer solar cells (PSCs) are systematically investigated. It is found that the ordered aggregation of these SMAs in films is enhanced gradually with the increase of alkoxy chain length. The single‐crystal structures of these SMAs further reveal that small changes in the side chain length can have a dramatic impact on molecular self‐assembly. The short‐circuit current density and power conversion efficiency values of the corresponding PSCs increase with the increase of the side chain length of the SMAs. The π–π coherence length of the SMAs in the active layers is increased with the increase of the side chain length, which could be the reason for the increase of the J_sc in the PSCs. The results indicate that small changes in side chain length can have a dramatic impact on the molecular self‐assembly, morphology, and photovoltaic performance of the PSCs. The structure–performance relationship established in this study can provide important instructions for the side chain engineering and for the design of efficient SMAs materials.     

Enhanced Performance in Polymer Solar Cells by Surface Energy Control

Enhanced performance of an inverted‐type polymer solar cell is reported by controlling the surface energy of a zinc oxide (ZnO) buffer layer, on which a photoactive layer composed of a polymer:fullerene‐derivative bulk heterojunction is formed. With the approach based on a mixed self‐assembled monolayer, the surface energy of the ZnO buffer layer can be controlled between 40 mN m^?1 and 70 mN m^?1 with negligible changes in its work function. For the given range of surface energy the power conversion efficiency increases from 3.27% to 3.70% through enhanced photocurrents. The optimized morphology obtained by surface energy control results in the enhanced photocurrent and transmission electron microscopy analysis verifies the correlation between the surface energy and the phase morphology of the bulk heterojunction. These results demonstrate that surface energy control is an effective method for further improving the performance of polymer solar cells, with potentially important implications for other organic devices containing an interface between a blended organic active layer and a buffer or an electrode layer.     

Structure Tuning of Crown Ether Grafted Conjugated Polymers as the Electron Transport Layer in Bulk‐Heterojunction Polymer Solar Cells for High Performance

A series of novel electron transport (ET) polymers composed of different conjugated main chains (fluorene, thiophene, and 2,7‐carbazole) and crown ether side chain (crown ether, aza‐crown ether and amine) is presented for bulk‐heterojunction polymer solar cells with poly(3‐hexylthiophene) (P3HT) or poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo [1,2‐b:4,5‐b′] dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]](PTB7) as the active polymer and aluminum metal as the cathode. Unexpectedly, it is found that the main chain of ET polymers has a greater effect on the interfacial dipole than the side chain, even when attaching a high polarity group. The electron‐rich bridge atom of the main chain may also contribute appreciably to the interfacial dipole. When used as the ET layer, all of these polymers can generate an optical interference effect for redistribution of the optical electric field as an optical spacer and, therefore, allow more light to be absorbed by the active layer, thus leading to an increase in short‐circuit current density. They can also block hole diffusion to the cathode and prevent electron–hole recombination during the ET process. Among the five ET polymers investigated, PCCn6 is the most effective one, providing a remarkable improvement in the power conversion efficiency (measured in air) of the device to 8.13% compared to 5.20% for PTB7:[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM).     

Self‐Powered Electronics by Integration of Flexible Solid‐State Graphene‐Based Supercapacitors with High Performance Perovskite Hybrid Solar Cells

To develop high‐capacitance flexible solid‐state supercapacitors and explore its application in self‐powered electronics is one of ongoing research topics. In this study, self‐stacked solvated graphene (SSG) films are reported that have been prepared by a facile vacuum filtration method as the free‐standing electrode for flexible solid‐state supercapacitors. The highly hydrated SSG films have low mass loading, high flexibility, and high electrical conductivity. The flexible solid‐state supercapacitors based on SSG films exhibit excellent capacitive characteristics with a high gravimetric specific capacitance of 245 F g^?1 and good cycling stability of 10 000 cycles. Furthermore, the flexible solid‐state supercapacitors are integrated with high performance perovskite hybrid solar cells (pero‐HSCs) to build self‐powered electronics. It is found that the solid‐state supercapacitors can be charged by pero‐HSCs and discharged from 0.75 V. These results demonstrate that the self‐powered electronics by integration of the flexible solid‐state supercapacitors with pero‐HSCs have great potential applications in storage of solar energy and in flexible electronics, such as portable and wearable personal devices.     

Dual Effect of ITO‐Interlayer on Inverted Top‐Illuminated Polymer Solar Cells: Wetting of Polyelectrolyte and Tuning of Cavity

Flexible inverted top‐illuminated polymer solar cells (IT‐PSCs) are fabricated by wetting of polyelectrolyte and designing a microcavity structure by laying an indium‐tin‐oxide (ITO) interlayer on top of an Ag reflector. The ITO‐coated Ag makes the surface hydrophilic, thereby improving wettability of polyethyleneimine (PEIE). This increased wettability of PEIE yields a reflective cathode with low work function of 3.73 eV. The ITO layer also tunes the light absorption spectrum in the active layer. Finite‐domain time‐difference simulation provides evidence that the ITO layer played a role in both the shift in resonant wavelength in the microcavity and confinement of the electric field to the active layer. Time‐dependent simulation suggests that the time to reach steady‐state light absorption is longer (6.6 fs) when a microcavity is present than when it is not present (3.8 fs); i.e., the microcavity increases light absorption in the active layer. The designed IT‐PSCs show a maximum photo‐conversion efficiency of 6.4% on plastic film and 6.1% on opaque copper foil; these are the highest values obtained by top‐illuminated PSCs on a metallic substrate. The IT‐PSCs have excellent mechanical flexibility and more stable in air than conventional normal structured devices.     

Entanglement of Conjugated Polymer Chains Influences Molecular Self‐Assembly and Carrier Transport

The influence of polymer entanglement on the self‐assembly, molecular packing structure, and microstructure of low‐M_w (lightly entangled) and high‐M_w (highly entangled) poly (3‐hexylthiophene) (P3HT), and the carrier transport in thin‐film transistors, are investigated. The polymer chains are gradually disentangled in a marginal solvent via ultrasonication of the polymer solution, and demonstrate improved diffusivity of precursor species (coils, aggregates, and microcrystallites), enhanced nucleation and crystallization of P3HT in solution, and self‐assembly of well‐ordered and highly textured fibrils at the solid–liquid interface. In low‐M_w P3HT, reducing chain entanglement enhances interchain and intrachain ordering, but reduces the interconnectivity of ordered domains (tie molecules) due to the presence of short chains, thus deteriorating carrier transport even in the face of improving crystallinity. Reducing chain entanglement in high‐M_w P3HT solutions increases carrier mobility up to ≈20‐fold, by enhancing interchain and intrachain ordering while maintaining a sufficiently large number of tie molecules between ordered domains. These results indicate that charge carrier mobility is strongly governed by the balancing of intrachain and interchain ordering, on the one hand, and interconnectivity of ordered domains, on the other hand. In high‐M_w P3HT, intrachain and interchain ordering appear to be the key bottlenecks to charge transport, whereas in low‐M_w P3HT, the limited interconnectivity of the ordered domains acts as the primary bottleneck to charge transport.     

Self‐Additive Low‐Dimensional Ruddlesden–Popper Perovskite by the Incorporation of Glycine Hydrochloride for High‐Performance and Stable Solar Cells

The recent rise of low‐dimensional Ruddlesden–Popper (RP) perovskites is notable for superior humidity stability, however they suffer from low power conversion efficiency (PCE). Suitable organic spacer cations with special properties display a critical effect on the performance and stability of perovskite solar cells (PSCs). Herein, a new strategy of designing self‐additive low‐dimensional RP perovskites is first proposed by employing a glycine salt (Gly⁺) with outstanding additive effect to improve the photovoltaic performance. Due to the strong interaction between C?O and Pb²⁺, the Gly⁺ can become a nucleation center and be beneficial to uniform and fast growth of the Gly‐based RP perovskites with larger grain sizes, leading to reduced grain boundary and increased carrier transport. As a result, the Gly‐based self‐additive low‐dimensional RP perovskites exhibit remarkable photoelectric properties, yielding the highest PCE of 18.06% for Gly (n = 8) devices and 15.61% for Gly (n = 4) devices with negligible hysteresis. Furthermore, the Gly‐based devices without encapsulation show excellent long‐term stability against humidity, heat, and UV light in comparison to BA‐based low‐dimensional PSCs. This approach provides a feasible design strategy of new‐type low‐dimensional RP perovskites to obtain highly efficient and stable devices for next‐generation photovoltaic applications.     

Near‐Infrared Small Molecule Acceptor Enabled High‐Performance Nonfullerene Polymer Solar Cells with Over 13% Efficiency

One of the most promising approaches to achieve high‐performance polymer solar cells (PSCs) is to develop nonfullerene small molecule acceptors (SMAs) with an absorption extending to the near‐infrared (NIR) region. In this work, two novel SMAs, namely, BTTIC and BTOIC, are designed and synthesized, with optical bandgaps (E_g^opt) of 1.47 and 1.39 eV, respectively. Desipte the narrow E_g^opt, the PBDB‐T:BTTIC‐ and PBDB‐T:BTOIC‐based PSCs can maintain high V_OCs of over 0.90 and 0.86 V, respectively, with low energy losses (E_loss) < 0.6 eV. Meanwhile, due to the favorable morphology of the PBDB‐T:BTTIC blend, balanced carrier mobilities are achieved. The high external quantum efficiencies enable a high power conversion efficiency (PCE) up to 13.18% for the PBDB‐T:BTTIC‐based PSCs. In comparison, BTOIC shows an excessive crystallization propensity owing to its oxyalkyl side groups, which eventually leads to a relatively low PCE for the PBDB‐T:BTOIC‐based PSCs. Overall, this work provides insights into the design of novel NIR‐absorbing SMAs for nonfullerene PSCs.     

Self‐Assembled Conjugated Thiophene‐Based Rotaxane Architectures: Structural,Computational, and Spectroscopic Insights into Molecular Aggregation

A comparative study of the self‐assembly at a variety of surfaces of a dithiophene rotaxane 1 ?β‐CD and its corresponding dumbbell, 1, by means of atomic force microscopy (AFM) imaging and scanning tunneling microscopy (STM) imaging on the micrometer and nanometer scale, respectively. The dumbbell is found to have a greater propensity to form ordered supramolecular assemblies, as a result of π–π interactions between dithiophenes belonging to adjacent molecules, which are hindered in the rotaxane. The fine molecular structure determined by STM was compared to that obtained by molecular modelling. The optical properties of both rotaxane and dumbbell in the solid state were investigated by steady‐state and time‐resolved photoluminescence (PL) experiments on spin‐cast films and diluted solutions. The comparison between the optical features of the threaded and unthreaded systems reveals an effective role of encapsulation in reducing aggregation and exciton migration for the rotaxanes with respect to the dumbbells, thus leading to higher PL quantum efficiency and preserved single‐molecule photophysics for longer times after excitation in the threaded oligomers.     

High‐Performance All‐Polymer Photoresponse Devices Based on Acceptor–Acceptor Conjugated Polymers

Three acceptor–acceptor (A–A) type conjugated polymers based on isoindigo and naphthalene diimide/perylene diimide are designed and synthesized to study the effects of building blocks and alkyl chains on the polymer properties and performance of all‐polymer photoresponse devices. Variation of the building blocks and alkyl chains can influence the thermal, optical, and electrochemical properties of the polymers, as indicated by thermogravimetric analysis, differential scanning calorimetry, UV–vis, cyclic voltammetry, and density functional theory calculations. Based on the A–A type conjugated polymers, the most efficient all‐polymer photovoltaic cells are achieved with an efficiency of 2.68%, and the first all‐polymer photodetectors are constructed with high responsivity (0.12 A W^?1) and detectivity (1.2 × 10¹² Jones), comparable to those of the best fullerene based organic photodetectors and inorganic photodetectors. Photoluminescence spectra, charge transport properties, and morphology of blend films are investigated to elucidate the influence of polymeric structures on device performances. This contribution demonstrates a strategy of systematically tuning the polymeric structures to achieve high performance all‐polymer photoresponse devices.     

A Versatile Fluoro‐Containing Low‐Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells

The versatility of a fluoro‐containing low band‐gap polymer, poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b’]dithiophene)‐alt‐4,7‐(5‐fluoro‐2,1,3‐benzothia‐diazole)] (PCPDTFBT) in organic photovoltaics (OPVs) applications is demonstrated. High boiling point 1,3,5‐trichlorobenzene (TCB) is used as a solvent to manipulate PCPDTFBT:[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) active layer morphology to obtain high‐performance single‐junction devices. It promotes the crystallization of PCPDTFBT polymer, thus improving the charge‐transport properties of the active layer. By combining the morphological manipulation with interfacial optimization and device engineering, the single‐junction device exhibits both good air stability and high power‐conversion efficiency (PCE, of 6.6%). This represents one of the highest PCE values for cyclopenta[2,1‐b;3,4‐b’]dithiophene (CPDT)‐based OPVs. This polymer is also utilized for constructing semitransparent solar cells and double‐junction tandem solar cells to demonstrate high PCEs of 5.0% and 8.2%, respectively.     

Optical Enhancement via Electrode Designs for High‐Performance Polymer Solar Cells

To capture the essence of the rapid progress in optical engineering exploited in high‐performance polymer solar cells (PSCs), a comprehensive overview focusing on recent developments and achievements in PSC electrode engineering is provided in this review. To date, various kinds of electrode materials and geometries are exploited to enhance light‐trapping in devices through distinct optical strategies. In addition to the widely used nanostructured electrodes that induce plasmonic‐enhanced light absorption, planar ultra‐thin metal films also have attracted significant attention due to their remarkably reflective transparent properties that beget efficient optical microcavities. These microcavities confine incident light with resonant frequencies between two reflective electrodes due to optically coherent interference, boosting the light absorption of thin‐film PSCs while maintaining efficient charge dissociation and extraction. After reviewing the challenges in developing high‐performance microcavity‐enhanced PSCs (MCPSCs), we discuss strategies to improve MCPSC performance further to showcase the potential of harnessing microcavity resonance effects in thin‐film PSCs.     

Alternating Copolymers of Cyclopenta[2,1‐b;3,4‐b′]dithiophene and Thieno[3,4‐c]pyrrole‐4,6‐dione for High‐Performance Polymer Solar Cells

A series of alternating copolymers of cyclopenta[2,1‐b;3,4‐b′]dithiophene (CPDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) have been prepared and characterized for polymer solar cell (PSC) applications. Different alkyl side chains, including butyl (Bu), hexyl (He), octyl (Oc), and 2‐ethylhexyl (EH), are introduced to the TPD unit in order to adjust the packing of the polymer chain in the solid state, while the hexyl side chain on the CPDT unit remains unchanged to simplify discussion. The polymers in this series have a simple main chain structure and can be synthesized easily, have a narrow band gap and a broad light absorption. The different alkyl chains on the TPD unit not only significantly influence the solubility and chain packing, but also fine tune the energy levels of the polymers. The polymers with Oc or EH group have lower HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energy levels, resulting higher open circuit voltages (V_oc) of the PSC devices. Power conversion efficiencies (PCEs) up to 5.5% and 6.4% are obtained from the devices of the Oc substituted polymer (PCPDTTPD‐Oc) with PC₆₁BM and PC₇₁BM, respectively. This side chain effect on the PSC performance is related to the formation of a fine bulk heterojunction structure of polymer and PCBM domains, as observed with atomic force microscopy.     

Highly Fluorescent Conjugated Polyelectrolyte Nanostructures: Synthesis,Self‐Assembly,and Al3+ Ion Sensing

A highly fluorescent triazine‐bridged polymer, poly[(diphenylamino‐s‐triazine)‐co‐(2‐methoxy‐5‐propyloxysulfonate‐1,4‐phenylene vinylene)] (DTMSPV), is synthesized from Wittig polycondensation of a triazine monomer with a water‐soluble p‐phenylene vinylene monomer. The fluorescent amphiphilic polymer in aqueous solution self‐assembled into nanoassemblies of micelle‐like nanostructure (MS) and π stacking nanostructure (πS), which have average sizes of 93 to 270 nm, depending on the concentration of DTMSPV. The micelle‐like nanostructure of DTMSPV (MS) shows blue emission at 457 and 488 nm with a high emission quantum yield (Φ_E) of 31% in aqueous solution. On the other hand, the Φ_E of π stacking structures (πS), formed in a highly concentrated solution, is lower than the MS. The MS exhibits fluorescence quenching as well as color change from blue to green/yellow, depending on the kinds of metal ions. The metal ion sensitivity is larger in the order of the main group ions (Na⁺, K⁺) < dicationic transition metal ions (Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Pd²⁺) < trivalent transition metal ions (Fe³⁺, Ru³⁺), with an exception of Al³⁺. In particular, the fluorescence of MS is dramatically quenched with color change to yellow in response to Al³⁺ concentrations. The selectivity and sensitivity of MS to Al³⁺ are unusually high even in the presence of competitive metal ions, which can be attributed to the specific interaction of triazine units with Al³⁺.