Fully solution-processed and multilayer blue organic light-emitting diodes based on efficient small molecule emissive layer and intergrated interlayer optimization

Efficient and fully solution-processed blue organic light-emitting diodes (OLEDs) based on fluorescent small-molecule and methanol/water soluble conjugated polymer as electron-injection material are reported. The emitting layer is 3,6-bis(9,9,9′,9′-tetrakis (6-(9H-carbazol-9-yl)hexyl)-9H,9′H-[2,2′-bifluoren]-7-yl)dib-nzo[b, d]thiophene 5, 5-dioxide (OCSoC) with a blue-fluorescent small-molecule, and a methanol/water soluble polymer poly[(9,9-bis(30-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl-fluorene)] (PFN) acted as electron-injection layer (EIL). All the organic layers are spin-coated from solution. The multilayer device structure with emitting layer/electron-injection layer is achieved by solution-processed method without the dissolution problem between layers. The performances of the devices show that the maximum luminous efficiency of the multilayer device is increased about 43%, compared to the single-layer device. PFN acting as the EIL material plays a key role in the improvement of the device performance when used in solution-processed small-molecule OLEDs.     

Binaphthyl‐Containing Green‐ and Red‐Emitting Molecules for Solution‐Processable Organic Light‐Emitting Diodes

Strong intermolecular interactions usually result in decreases in solubility and fluorescence efficiency of organic molecules. Therefore, amorphous materials are highly pursued when designing solution‐processable, electroluminescent organic molecules. In this paper, a non‐planar binaphthyl moiety is presented as a way of reducing intermolecular interactions and four binaphthyl‐containing molecules ( BNCM s): green‐emitting BBB and TBT as well as red‐emitting BTBTB and TBBBT , are designed and synthesized. The photophysical and electrochemical properties of the molecules are systematically investigated and it is found that TBT , TBBBT , and BTBTB solutions show high photoluminescence (PL) quantum efficiencies of 0.41, 0.54, and 0.48, respectively. Based on the good solubility and amorphous film‐forming ability of the synthesized BNCM s, double‐layer structured organic light‐emitting diodes (OLEDs) with BNCM s as emitting layer and poly(N‐vinylcarbazole) (PVK) or a blend of poly[N,N′‐bis(4‐butylphenyl)‐N,N′‐bis(phenyl)benzidine] and PVK as hole‐transporting layer are fabricated by a simple solution spin‐coating procedure. Amongst those, the BTBTB based OLED, for example, reaches a high maximum luminance of 8315 cd · m⁻² and a maximum luminous efficiency of 1.95 cd · A⁻¹ at a low turn‐on voltage of 2.2 V. This is one of the best performances of a spin‐coated OLED reported so far. In addition, by doping the green and red BNCM s into a blue‐emitting host material poly(9,9‐dioctylfluorene‐2,7‐diyl) high performance white light‐emitting diodes with pure white light emission and a maximum luminance of 4000 cd · m⁻² are realized.     

High‐Efficiency and Color Stable Blue‐Light‐Emitting Polymers and Devices

Novel fluorene‐based blue‐light‐emitting copolymers with an ultraviolet‐blue‐light (UV‐blue‐light) emitting host and a blue‐light emitting component, 4‐N,N‐diphenylaminostilbene (DPS) have been designed and synthesized by using the palladium‐ catalyzed Suzuki coupling reaction. It was found that both copolymers poly [2,7‐(9,9‐dioctylfluorene)‐alt‐1,3‐(5‐carbazolphenylene)] (PFCz) DPS1 and PFCz‐DPS1‐OXD show pure blue‐light emission even with only 1 % DPS units because of the efficient energy transfer from the UV‐blue‐light emitting PFCz segments to the blue‐light‐emitting DPS units. Moreover, because of the efficient energy transfer/charge trapping in these copolymers, PFCz‐DPS1 and PFCz‐DPS1‐OXD show excellent device performance with a very stable pure blue‐light emission. By using a neutral surfactant poly[9,9‐bis(6'‐(diethanolamino)hexyl)‐fluorene] (PFN‐OH) as the electron injection layer, the device based on PFCz‐DPS1‐OXD5 with the configuration of ITO/PEDOT:PSS/PVK/polymer/PFN‐OH/Al showed a maximum quantum efficiency of 2.83 % and a maximum luminous efficiency of 2.50 cd A^–1. Its CIE 1931 chromaticity coordinates of (0.156, 0.080) match very well with the NTSC standard blue pixel coordinates of (0.14, 0.08). These results indicate that this kind of dopant/host copolymer could be a promising candidate for blue‐light‐emitting polymers with high efficiency, good color purity, and excellent color stability.     

Electron‐Rich Alcohol‐Soluble Neutral Conjugated Polymers as Highly Efficient Electron‐Injecting Materials for Polymer Light‐Emitting Diodes

We report the design and synthesis of three alcohol‐soluble neutral conjugated polymers, poly[9,9‐bis(2‐(2‐(2‐diethanolaminoethoxy) ethoxy)ethyl)fluorene] (PF‐OH), poly[9,9‐bis(2‐(2‐(2‐diethanol‐aminoethoxy)ethoxy)ethyl)fluorene‐alt‐4,4′‐phenylether] (PFPE‐OH) and poly[9,9‐bis(2‐(2‐(2‐diethanolaminoethoxy) ethoxy)ethyl)fluorene‐alt‐benzothiadizole] (PFBT‐OH) with different conjugation length and electron affinity as highly efficient electron injecting and transporting materials for polymer light‐emitting diodes (PLEDs). The unique solubility of these polymers in polar solvents renders them as good candidates for multilayer solution processed PLEDs. Both the fluorescent and phosphorescent PLEDs based on these polymers as electron injecting/transporting layer (ETL) were fabricated. It is interesting to find that electron‐deficient polymer (PFBT‐OH) shows very poor electron‐injecting ability compared to polymers with electron‐rich main chain (PF‐OH and PFPE‐OH). This phenomenon is quite different from that obtained from conventional electron‐injecting materials. Moreover, when these polymers were used in the phosphorescent PLEDs, the performance of the devices is highly dependent on the processing conditions of these polymers. The devices with ETL processed from water/methanol mixed solvent showed much better device performance than the devices processed with methanol as solvent. It was found that the erosion of the phosphorescent emission layer could be greatly suppressed by using water/methanol mixed solvent for processing the polymer ETL. The electronic properties of the ETL could also be influenced by the processing conditions. This offers a new avenue to improve the performance of phosphorescent PLEDs through manipulating the processing conditions of these conjugated polymer ETLs.     

Solution‐Processed Organic Light‐Emitting Transistors Incorporating Conjugated Polyelectrolytes

Improved performance of p‐type organic light‐emitting transistors (OLETs) is demonstrated by introducing a conjugated polyelectrolyte (CPE) layer and symmetric high work function (WF) source and drain metal electrodes. The OLET comprises a tri‐layer film consisting of a hole transporting layer, an emissive layer, and a CPE layer as an electron injection layer. The thickness of the CPE layer is critical for achieving good performance and provides an important structural handle for consideration in future optimization studies. We also demonstrate for the first time, good performance solution‐processed blue‐emitting OLETs. These results further demonstrate the simplification of device fabrication and improved performance afforded by integrating CPE interlayers into organic optoelectronic devices.     

Characteristics of Solution‐Processed Small‐Molecule Organic Films and Light‐Emitting Diodes Compared with their Vacuum‐Deposited Counterparts

Although significant progress has been made in the development of vacuum‐deposited small‐molecule organic light‐emitting diodes (OLEDs), one of the most desired research goals is still to produce flexible displays by low‐cost solution processing. The development of solution‐processed OLEDs based on small molecules could potentially be a good approach but no intensive studies on this topic have been conducted so far. To fabricate high‐performance devices based on solution‐processed small molecules, the underlying nature of the produced films and devices must be elucidated. Here, the distinctive characteristics of solution‐processed small‐molecule films and devices compared to their vacuum‐deposited counterparts are reported. Solution‐processed blue OLEDs show a very high luminous efficiency (of about 8.9 cd A^–1) despite their simplified structure. A better hole‐blocking and electron‐transporting layer is essential for achieving high‐efficiency solution‐processed devices because the solution‐processed emitting layer gives the devices a better hole‐transporting capability and more electron traps than the vacuum‐deposited layer. It is found that the lower density of the solution‐processed films (compared to the vacuum‐deposited films) can be a major cause for the short lifetimes observed for the corresponding devices.     

Amino N‐Oxide Functionalized Conjugated Polymers and their Amino‐Functionalized Precursors: New Cathode Interlayers for High‐Performance Optoelectronic Devices

A series of amino N‐oxide functionalized polyfluorene homopolymers and copolymers (PNOs) are synthesized by oxidizing their amino functionalized precursor polymers (PNs) with hydrogen peroxide. Excellent solubility in polar solvents and good electron injection from high work‐function metals make PNOs good candidates for interfacial modification of solution processed multilayer polymer light‐emitting diodes (PLEDs) and polymer solar cells (PSCs). Both PNOs and PNs are used as cathode interlayers in PLEDs and PSCs. It is found that the resulting devices show much better performance than devices based on a bare Al cathode. The effect of side chain and main chain variations on the device performance is investigated. PNOs/Al cathode devices exhibit better performance than PNs/Al cathode devices. Moreover, devices incorporating polymers with para‐linkage of pyridinyl moieties exhibit better performance than those using polymers with meta‐linked counterparts. With a poly[(2,7‐(9,9‐bis(6‐(N,N‐diethylamino)‐hexyl N‐oxide)fluorene))‐alt‐(2,5‐pyridinyl)] (PF6NO25Py) cathode interlayer, the resulting device exhibits a luminance efficiency of 16.9 cd A^?1 and a power conversion efficiency of 6.9% for PLEDs and PSCs, respectively. These results indicate that PNOs are promising new cathode interlayers for modifying a range of optoelectronic devices.     

Controlling the Recombination Zone of White Organic Light‐Emitting Diodes with Extremely Long Lifetimes

The lifetime of the organic devices remains a major challenge that must be overcome before the wide application of white organic light‐emitting diodes (WOLEDs) technology. In this work, we present a new strategy to achieve WOLEDs with an extremely long lifetime by wisely control of the recombination zone. A blue emitting layer of 6,6′‐(1,2‐ethenediyl)bis(N‐2‐naphthalenyl‐N‐phenyl‐2‐naphthalenamine doped 9‐(1‐naphthyl)‐10‐(2‐naphthyl)‐anthracene was deposited on top of the mixed host blue emitting layer to prevent hole penetration into the electron transporting layer and to attain better confinement of carrier recombination. In this way, we obtained a WOLED with a record high lifetime of over 150 000 hours at an initial brightness of 1000 cd m^?2, 40 times longer than the conventional bilayer WOLED. The electroluminescent spectra of the long‐lived WOLED showed almost no color‐shifting after accelerated aging. It is anticipated that these results might be a starting point for further research towards ultrastable OLED displays and lightings.     

Extremely Low‐Threshold Amplified Spontaneous Emission of 9,9′‐Spirobifluorene Derivatives and Electroluminescence from Field‐Effect Transistor Structure

By doping 2,7‐bis[4‐(N‐carbazole)phenylvinyl]‐9,9′‐spirobifluorene (spiro‐SBCz) into a wide energy gap 4,4′‐bis(9‐carbazole)‐2,2′‐biphenyl (CBP) host, we demonstrate an extremely low ASE threshold of E_th = (0.11 ± 0.05) μJ cm^–2 (220 W cm^–2) which is the lowest ASE threshold ever reported. In addition, we confirmed that the spiro‐SBCz thin film functions as an active light emitting layer in organic light‐emitting diode (OLED) and a field‐effect transistor (FET). In particular, we succeeded to obtain linear electroluminescence in the FET structure which will be useful for future organic laser diodes.     

Fluorene‐Based Copolymers for Red‐Light‐Emitting Diodes

The syntheses of new fluorene‐based π‐conjugated copolymers; namely, poly((5,5″‐(3′,4′‐dihexyl‐2,2′;5′,2″‐terthiophene 1′,1′‐dioxide))‐alt‐2,7‐(9,9‐dihexylfluorene)) (PFTORT), poly((5,5″″‐(3″,4″‐dihexyl‐2,2′:5′,2′:5″,2‴:5‴,2″″‐quinquethiophene 1″,1″‐dioxide))‐alt‐2,7‐(9,9‐dihexylfluorene)) (PFTTORTT), and poly((5,5‐E‐α‐(2‐thienyl)methylene)‐2‐thiopheneacetonitrile)‐alt‐2,7‐(9,9‐dihexylfluorene)) (PFTCNVT), are reported. In the solid state, PFTORT and PFTCNVT present red–orange emission (with a maximum at 610 nm) while PFTTORTT shows a red emission with a maximum at 666 nm. In all cases, electrochemical measurements have revealed p‐ and n‐dopable copolymers. All these copolymers have been successfully tested in simple light‐emitting diodes and show promising results for orange‐ and red‐light‐emitting devices.     

2,7‐Bis(diarylamino)‐9,9‐dimethylfluorenes as Hole‐Transport Materials for Organic Light‐Emitting Diodes

2,7‐Bis(p‐methoxyphenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 1′ ), 2,7‐bis(phenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 2′ ) and 2,7‐bis(p‐fluorophenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 3′ ) have been synthesized using the palladium‐catalyzed reaction of the appropriate diarylamines with 2,7‐dibromo‐9,9‐dimethylfluorene. These molecules have glass‐transition temperatures 15–20 °C higher than those for their biphenyl‐bridged analogues, and are 0.11–0.14 V more readily oxidized. Fluorescence spectra and fluorescence quantum yields for dimethylfluorene‐bridged and biphenyl‐bridged species are similar, but the peaks of the absorption spectra of 1′ – 3′ are considerably red‐shifted relative to those of their biphenyl‐bridged analogues. Time‐of‐flight hole mobilities of 1′ – 3′ /polystyrene blends are in a similar range to those of the biphenyl‐bridged analogues. Analysis according to the disorder formalism yields parameters rather similar to those for the biphenyl species, but with somewhat lower zero‐field mobility values. Density functional theory (DFT) calculations suggest that the enforced planarization of the fluorene bridge leads to a slightly larger reorganization energy for the neutral/cation electron‐exchange reaction than in the biphenyl‐bridged system. Organic light‐emitting diodes have been fabricated using 1′ – 3′ /polystyrene blends as the hole‐transport layer and tris(8‐hydroxy quinoline)aluminium as the electron‐transport layer and lumophore. Device performance shows a correlation with the ionization potential of the amine materials paralleling that seen in biphenyl‐based systems, and fluorene species show similar performance to biphenyl species with comparable ionization potential.     

Surface‐Directed Phase Separation of Conjugated Polymer Blends for Efficient Light‐Emitting Diodes

The ability to control organic‐organic interfaces in conjugated polymer blends is critical for further device improvement. Here, we control the phase separation in blends of poly(9,9‐di‐n‐octylfluorene‐alt‐benzothiadiazole) (F8BT) and poly(9,9‐di‐n‐octylfluorene‐alt‐(1,4‐phenylene‐((4‐sec‐butylphenyl)imino)‐1,4‐phenylene) (TFB) via chemical modification of the substrate by microcontact printing of octenyltrichlorosilane molecules. The lateral phase‐separated structures in the blend film closely replicate the underlying micrometer‐scale chemical pattern. We found nanometer‐scale vertical segregation of the polymers within both lateral domains, with regions closer to the substrate being substantially pure phases of either polymer. Such phase separation has important implications for the performance of light‐emitting diodes fabricated using these patterned blend films. In the absence of a continuous TFB wetting layer at the substrate interface, as typically formed in spin‐coated blend films, charge carrier injection is confined in the well‐defined TFB‐rich domains. This confinement leads to high electroluminescence efficiency, whereas the overall reduction in the roughness of the patterned blend film results in slower decay of device efficiency at high voltages. In addition, the amount of surface out‐coupling of light in the forward direction observed in these blend devices is found to be strongly correlated to the distribution of periodicity of the phase‐separated structures in the active layer.     

Self‐Doping Cathode Interfacial Material Simultaneously Enabling High Electron Mobility and Powerful Work Function Tunability for High‐Efficiency All‐Solution‐Processed Polymer Light‐Emitting Diodes

A variety of N ‐hydrogenated/N ‐methylated pyridinium salts are elaborately designed and synthesized. Thermogravimetric and X‐ray photoelectron spectra analysis indicate the intensities of the N? H covalent bonds are strengthened step‐by‐step from 3,3′‐(5′‐(3‐(pyridin‐3‐yl)phenyl)‐[1,1′:3′,1″‐terphenyl]‐3,3″‐diyl)dipyridine (Tm)‐HCl to Tm‐HBr and then Tm‐TfOH, which results in gradually improved cathode interfacial modification abilities. The larger dipole moments of N⁺? H containing moieties compared to those of the N⁺? CH₃ endow them with more preferable interfacial modification abilities. Electron paramagnetic resonance signals reveal the existence of radical anions in the solid state of Tm‐TfOH, which enables its self‐doping property and high electron mobility up to 1.67 × 10^?3 cm² V^?1 s^?1. Using the Tm‐TfOH as the cathode interfacial layers (CILs), the phenyl‐substituted poly(para ‐phenylene vinylene)‐based all‐solution‐processed polymer light‐emitting diodes (PLEDs) achieve more preferable device performances than the poly[(9,9‐bis(3′‐(N ,N ‐dimethylamino)propyl)‐2,7‐fluorene)‐alt ‐2,7‐(9,9‐dioctylfluorene)]‐based ones, i.e., high current density of nearly 300 mA cm^?2, very high luminance over 15 000 cd m^?2 at a low bias of 5 V. Remarkably, the thickness of the CILs has little impact on the device performance and high efficiencies are maintained even at thicknesses up to 85 nm, which is barely realized in PLEDs with small‐molecule‐based electron transporting layers.     

Bright Blue Solution Processed Triple‐Layer Polymer Light‐Emitting Diodes Realized by Thermal Layer Stabilization and Orthogonal Solvents

The realization of fully solution processed multilayer polymer light‐emitting diodes (PLEDs) constitutes the pivotal point to push PLED technology to its full potential. Herein, a fully solution processed triple‐layer PLED realized by combining two different deposition strategies is presented. The approach allows a successive deposition of more than two polymeric layers without extensively redissolving already present layers. For that purpose, a poly(9,9‐dioctyl‐fluorene‐co‐N‐(4‐butylphenyl)‐diphenylamine) (TFB) layer is stabilized by a hard‐bake process as hole transport layer on top of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). As emitting layer, a deep blue emitting pyrene‐triphenylamine copolymer is deposited from toluene solution. To complete the device assembly 9,9‐bis(3‐(5′,6′‐bis(4‐(polyethylene glycol)phenyl)‐[1,1′:4′,1″‐terphenyl]‐2′‐yl)propyl)‐9′,9′‐dioctyl‐2,7‐polyfluorene (PEGPF), a novel polyfluorene‐type polymer with polar sidechains, which acts as the electron transport layer, is deposited from methanol in an orthogonal solvent approach. Atomic force microscopy verifies that all deposited layers stay perfectly intact with respect to morphology and layer thickness upon multiple solvent treatments. Photoelectron spectroscopy reveals that the offsets of the respective frontier energy levels at the individual polymer interfaces lead to a charge carrier confinement in the emitting layer, thus enhancing the exciton formation probability in the device stack. The solution processed PLED‐stack exhibits bright blue light emission with a maximum luminance of 16 540 cd m^?2 and a maximum device efficiency of 1.42 cd A^?1, which denotes a five‐fold increase compared to corresponding single‐layer devices and demonstrates the potential of the presented concept.     

An Alternative Approach to Constructing Solution Processable Multifunctional Materials: Their Structure,Properties, and Application in High‐Performance Organic Light‐Emitting Diodes

A new series of full hydrocarbons, namely 4,4′‐(9,9′‐(1,3‐phenylene)bis(9H‐fluorene‐9,9‐diyl))bis(N,N‐diphenylaniline) (DTPAFB), N,N′‐(4,4′‐(9,9′‐(1,3‐phenylene)bis(9H‐fluorene‐9,9‐diyl))bis(4,1‐phenylene))bis(N‐phenylnaphthalen‐1‐amine) (DNPAFB), 1,3‐bis(9‐(4‐(9H‐carbazol‐9‐yl)phenyl)‐9H‐fluoren‐9‐yl)benzene, and 1,3‐bis(9‐(4‐(3,6‐di‐tert‐butyl‐9H‐carbazol‐9‐yl)phenyl)‐9H‐fluoren‐9‐yl)benzene, featuring a highly twisted tetrahedral conformation, are designed and synthesized. Organic light‐emitting diodes (OLEDs) comprising DNPAFB and DTPAFB as hole transporting layers and tris(quinolin‐8‐yloxy)aluminum as an emitter are made either by vacuum deposition or by solution processing, and show much higher maximum efficiencies than the commonly used N,N′‐di(naphthalen‐1‐yl)‐N,N′‐diphenylbiphenyl‐4,4′‐diamine device (3.6 cd A^?1) of 7.0 cd A^?1 and 6.9 cd A^?1, respectively. In addition, the solution processed blue phosphorescent OLEDs employing the synthesized materials as hosts and iridium (III) bis[(4,6‐di‐fluorophenyl)‐pyridinato‐N, C²] picolinate (FIrpic) phosphor as an emitter present exciting results. For example, the DTPAFB device exhibits a brightness of 47 902 cd m^?2, a maximum luminescent efficiency of 24.3 cd A^?1, and a power efficiency of 13.0 lm W^?1. These results show that the devices are among the best solution processable blue phosphorescent OLEDs based on small molecules. Moreover, a new approach to constructing solution processable small molecules is proposed based on rigid and bulky fluorene and carbazole moieties combined in a highly twisted configuration, resulting in excellent solubility as well as chemical miscibility, without the need to introduce any solubilizing group such as an alkyl or alkoxy chain.     

Self‐assembled Electroactive Phosphonic Acids on ITO: Maximizing Hole‐Injection in Polymer Light‐Emitting Diodes

In order to fulfill the promise of organic electronic devices, performance‐limiting factors, such as the energetic discontinuity of the material interfaces, must be overcome. Here, improved performance of polymer light‐emitting diodes (PLEDs) is demonstrated using self‐assembled monolayers (SAMs) of triarylamine‐based hole‐transporting molecules with phosphonic acid‐binding groups to modify the surface of the indium tin oxide (ITO) anode. The modified ITO surfaces are used in multilayer PLEDs, in which a green‐emitting polymer, poly[2,7‐(9,9‐dihexylfluorene)‐co‐4,7‐(2,1,3‐benzothiadiazole)] (PFBT5), is sandwiched between a thermally crosslinked hole‐transporting layer (HTL) and an electron‐transporting layer (ETL). All tetraphenyl‐diamine (TPD)‐based SAMs show significantly improved hole‐injection between ITO and the HTL compared to oxygen plasma‐treated ITO and simple aromatic SAMs on ITO. The device performance is consistent with the hole‐transporting properties of triarylamine groups (measured by electrochemical measurements) and improved surface energy matching with the HTL. The turn‐on voltage of the devices using SAM‐modified anodes can be lowered by up to 3 V compared to bare ITO, yielding up to 18‐fold increases in current density and up to 17‐fold increases in brightness at 10 V. Variations in hole‐injection and turn‐on voltage between the different TPD‐based molecules are attributed to the position of alkyl‐spacers within the molecules.     

Cover Picture: White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene as the Blue Host and a 2,1,3‐Benzothiadiazole Derivative as the Orange Dopant (Adv. Funct. Mater. 7/2006)

New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized by Wang and co‐workers on p. 957. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue and orange emission from the corresponding emitting species. A single‐layer device has been fabricated that has performance characteristics roughly comparable to those of organic white‐light‐emitting diodes with multilayer device structures. New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λ_max = 421 nm/445 nm) and orange emission (λ_max = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐(N‐phenyl‐N‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m^–2, luminance efficiency of 7.30 cd A^–1, and power efficiency of 3.34 lm W^–1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A^–1, power efficiency of 5.75 lm W^–1, external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m^–2. This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.     

Modulation of Förster and Dexter Interactions in Single‐Emissive‐Layer All‐Fluorescent WOLEDs for Improved Efficiency and Extended Lifetime

White organic light‐emitting diodes (WOLEDs) with thermally activated delayed fluorophor sensitized fluorescence (TSF) have aroused wide attention, considering their potential for full exciton utilization without noble‐metal containing phosphors. However, performances of TSF‐WOLEDs with a single‐emissive‐layer (SEL) still suffer from low exciton utilization and insufficient blue emission for proper white balance. Here, by modulating Förster and Dexter interactions in SEL‐TSF‐WOLEDs, high efficiencies, balanced white spectra, and extended lifetimes are realized simultaneously. Given the different dependencies of Förster and Dexter interactions on intermolecular distances, sterically shielded blue thermally activated delayed fluorescence (TADF) emitters and orange conventional fluorescent dopants (CFDs) with electronically inert peripheral units are adopted to enlarge distances of electronically active chromophores, not only blocking the Dexter interaction to prevent exciton loss but also finely suppressing the Förster one to guarantee balanced white emission with sufficient blue components. It thus provides the possibility to maximize device performances in a large range of CFD concentrations. A record high maximum external quantum efficiency/power efficiency of 19.6%/52.2 lm W^?1, Commission Internationale de L'Eclairage coordinate of (0.33, 0.45), and prolonged half‐lifetime of over 2300 h at an initial luminance of 1000 cd m^?2 are realized simultaneously for SEL‐TSF‐WOLEDs, paving the way toward practical applications.     

Solution‐Processed Zinc Oxide as High‐Performance Air‐Stable Electron Injector in Organic Ambipolar Light‐Emitting Field‐Effect Transistors

Electron injection from the source–drain electrodes limits the performance of many n‐type organic field‐effect transistors (OFETs), particularly those based on organic semiconductors with electron affinities less than 3.5 eV. Here, it is shown that modification of gold source–drain electrodes with an overlying solution‐deposited, patterned layer of an n‐type metal oxide such as zinc oxide (ZnO) provides an efficient electron‐injecting contact, which avoids the use of unstable low‐work‐function metals and is compatible with high‐resolution patterning techniques such as photolithography. Ambipolar light‐emitting field‐effect transistors (LEFETs) based on green‐light‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT) and blue‐light‐emitting poly(9,9‐dioctylfluorene) (F8) with electron‐injecting gold/ZnO and hole‐injecting gold electrodes show significantly lower electron threshold voltages and several orders of magnitude higher ambipolar currents, and hence light emission intensities, than devices with bare gold electrodes. Moreover, different solution‐deposited metal oxide injection layers are compared. By spin‐coating ZnO from a low‐temperature precursor, processing temperatures could be reduced to 150 °C. Ultraviolet photoemission spectroscopy (UPS) shows that the improvement in transistor performance is due to reduction of the electron injection barrier at the interface between the organic semiconductor and ZnO/Au compared to bare gold electrodes.     

White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene as the Blue Host and a 2,1,3‐Benzothiadiazole Derivative as the Orange Dopant

New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λ_max = 421 nm/445 nm) and orange emission (λ_max = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐(N‐phenyl‐N‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m^–2, luminance efficiency of 7.30 cd A^–1, and power efficiency of 3.34 lm W^–1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A^–1, power efficiency of 5.75 lm W^–1, external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m^–2. This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.