Non-lithographic SERS substrates: tailoring surface chemistry for Au nanoparticle cluster assembly

Near‐field plasmonic coupling and local field enhancement in metal nanoarchitectures, such as arrangements of nanoparticle clusters, have application in many technologies from medical diagnostics, solar cells, to sensors. Although nanoparticle‐based cluster assemblies have exhibited signal enhancements in surface‐enhanced Raman scattering (SERS) sensors, it is challenging to achieve high reproducibility in SERS response using low‐cost fabrication methods. Here an innovative method is developed for fabricating self‐organized clusters of metal nanoparticles on diblock copolymer thin films as SERS‐active structures. Monodisperse, colloidal gold nanoparticles are attached via a crosslinking reaction on self‐organized chemically functionalized poly(methyl methacrylate) domains on polystyrene‐block‐poly(methyl methacrylate) templates. Thereby nanoparticle clusters with sub‐10‐nanometer interparticle spacing are achieved. Varying the molar concentration of functional chemical groups and crosslinking agent during the assembly process is found to affect the agglomeration of Au nanoparticles into clusters. Samples with a high surface coverage of nanoparticle cluster assemblies yield relative enhancement factors on the order of 10⁹ while simultaneously producing uniform signal enhancements in point‐to‐point measurements across each sample. High enhancement factors are associated with the narrow gap between nanoparticles assembled in clusters in full‐wave electromagnetic simulations. Reusability for small‐molecule detection is also demonstrated. Thus it is shown that the combination of high signal enhancement and reproducibility is achievable using a completely non‐lithographic fabrication process, thereby producing SERS substrates having high performance at low cost.     

Controlled Assembly of Highly Raman‐Enhancing Silver Nanocap Arrays Templated by Porous Anodic Alumina Membranes

A convenient nanoscale technique is reported for the fabrication of highly ordered hemispherical silver nanocap arrays templated by porous anodic alumina (PAA) membranes as robust and cost‐efficient surface‐enhanced Raman scattering (SERS) substrates. This geometry produces a high Raman signal due to its periodic hexagonal arrangements and control of the gap between the nanostructures in the sub‐10‐nm regime. The surface structure can be tuned further to optimize the enhancement factor according to optional PAA fabrication and silver deposition parameters. Finite‐difference time‐domain calculations indicate that the structure may possess excellent SERS characteristics due to the high density and abundance of hot spots.     

Monolayer Graphene Coupled to a Flexible Plasmonic Nanograting for Ultrasensitive Strain Monitoring

Plasmonically coupled graphene structures have shown great promise for sensing applications. Their complex and cumbersome fabrication, however, has prohibited their widespread application and limited their use to rigid, planar surfaces. Here, a plasmonic sensor based on gold nanowire arrays on an elastomer with an added graphene monolayer is introduced. The stretchable plasmonic nanostructures not only significantly enhance the Raman signal from graphene, but can also be used by themselves as a sensor platform for 2D strain sensing. These nanowire arrays on an elastomer are fabricated by template‐stripping based nanotransfer printing, which enables a simple and fast production of stable nanogratings. The ultrasmooth surfaces of such transferred structures facilitate reliable large‐area transfers of graphene monolayers. The resulting coupled graphene‐nanograting construct exhibits ultrahigh sensitivity to applied strain, which can be detected by shifts in the plasmonic‐enhanced Raman spectrum. Furthermore, this sensor enables the detection of adsorbed molecules on nonplanar surfaces through graphene‐assisted surface enhanced Raman spectroscopy (SERS). The simple fabrication of the plasmonic nanowire array platform and the graphene‐coupled devices have the potential to trigger widespread SERS applications and open up new opportunities for high‐sensitivity strain sensing applications.     

Focusing Plasmons in Nanoslits for Surface‐Enhanced Raman Scattering

The focusing of plasmons to obtain a strong and localized electromagnetic‐field enhancement for surface‐enhanced Raman scattering (SERS) is increasing the interest in using plasmonic devices as molecular sensors. In this Full Paper, we report the successful fabrication and demonstration of a solid‐state plasmonic nanoslit–cavity device equipped with nanoantennas on a freestanding thin silicon membrane as a substrate for SERS. Numerical calculations predict a strong and spatially localized enhancement of the optical field in the nanoslit (6 nm in width) upon irradiation. The predicted enhancement factor of SERS was 5.3 × 10⁵, localized in an area of just 6 × 1.5 nm². Raman spectroscopy and imaging confirm an enhancement factor of ≈10⁶ for SERS from molecules chemisorbed at the nanoslit, and demonstrate the electromagnetic‐field‐enhancing function of the plasmonic nanoantennas. The freestanding membrane is open on both sides of the nanoslit, offering the potential for through‐slit molecular translocation studies, and opening bright new perspectives for SERS applications in real‐time (bio)chemical analysis.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Hot-spot engineering in polygonal nanofinger assemblies for surface enhanced Raman spectroscopy

Multiparticle assemblies of nanoscale structures are the fundamental building blocks for powerful plasmonic devices. Here we show the controlled formation of polygonal metal nanostructure assemblies, including digon, trigon, tetragon, pentagon, and hexagon arrays, which were formed on top of predefined flexible polymer pillars that undergo self-coalescence, analogous to finger closing, with the aid of microcapillary forces. This hybrid approach of combining top-down fabrication with self-assembly enables the formation of complex nanoplasmonic structures with sub-nanometer gaps between gold nanoparticles. On comparison of the polygon-shaped assemblies, the symmetry dependence of the nanoplasmonic structures was determined for application to surface enhanced Raman spectroscopy (SERS), with the pentagonal assembly having the largest Raman enhancement for the tested molecules. Electromagnetic simulations of the polygonal structures were performed to visualize the field enhancements of the hot spots so as to guide the rational design of optimal SERS structures.     

A Droplet‐Based High‐Throughput SERS Platform on a Droplet‐Guiding‐Track‐Engraved Superhydrophobic Substrate

A novel droplet‐based surface‐enhanced Raman scattering (SERS) sensor for high‐throughput real‐time SERS monitoring is presented. The developed sensors are based on a droplet‐guiding‐track‐engraved superhydrophobic substrate covered with hierarchical SERS‐active Ag dendrites. The droplet‐guiding track with a droplet stopper is designed to manipulate the movement of a droplet on the superhydrophobic substrate. The superhydrophobic Ag dendritic substrates are fabricated through a galvanic displacement reaction and subsequent self‐assembled monolayer coating. The optimal galvanic reaction time to fabricate a SERS‐active Ag dendritic substrate for effective SERS detection is determined, with the optimized substrate exhibiting an enhancement factor of 6.3 × 10⁵. The height of the droplet stopper is optimized to control droplet motion, including moving and stopping. Based on the manipulation of individual droplets, the optimized droplet‐based real‐time SERS sensor shows high resistance to surface contaminants, and droplets containing rhodamine 6G, Nile blue A, and malachite green are successively controlled and detected without spectral interference. This noble droplet‐based SERS sensor reduces sample preparation time to a few seconds and increased detection rate to 0.5 µ L s^?1 through the simple operation mechanism of the sensor. Accordingly, our sensor enables high‐throughput real‐time molecular detection of various target analytes for real‐time chemical and biological monitoring.     

Gold Binary‐Structured Arrays Based on Monolayer Colloidal Crystals and Their Optical Properties

A simple and flexible route is presented to fabricate a gold binary‐structured ordered array by one step based on non‐shadow deposition on a plasma etching‐induced dualistic monolayer colloidal crystal. Such a Au binary‐structure array is built of hexagonally arranged nanoshells and nanorings which stand between two adjacent nanoshells. Six gold nanorings surround each nanoshell. The obtained arrays exhibit both the controllable surface‐plasmon‐resonance (SPR) properties of Au nanoshells and the strong electromagnetic‐field‐enhancement effects of Au nanorings, with the high structural stability of ordered arrays, and show promising potential as the substrate of surface‐enhanced Raman scattering (SERS)‐based devices. The method could also be suitable for fabrication of other material binary‐structured arrays. This study is important in designing and fabricating basal materials for the next generation of multifunctional nanostructured devices.     

Highly Ordered Arrays of Particle-in-Bowl Plasmonic Nanostructures for Surface-Enhanced Raman Scattering

A highly ordered particle-in-bowl (PIB) nanostructure array is designed and fabricated to achieve large field enhancement for the surface-enhanced Raman scattering (SERS) application. This new type of PIB structure is composed of an Ag particle located at the bottom of an Au bowl, and the two are separated by a precisely controlled nanoscale dielectric layer. The fabrication of the PIB structure is based on the self-assembly of polystyrene spheres and atomic layer deposition (ALD), which allows good control of the metal particle size and gap distance, as well as large-scale ordering. Numerical simulation reveals a high enhancement of the local field at the nanogaps. The SERS performance of the PIB arrays, and the effects of the Ag particle size and the ALD dielectric layer thickness are characterized, results of which are in reasonable agreement with simulation. With Rhodmaine 6G as the probe molecule, the spatially averaged SERS enhancement factor is on the order of 3.8 × 10(7) and the local field enhancement from simulation can be up to 10(8) .     

The Control of Colloidal Grain Boundaries through Evaporative Vertical Self‐Assembly

Self‐assembly continuously gains attention as an excellent method to create novel nanoscale structures with a wide range of applications in photonics, optoelectronics, biomedical engineering, and heat transfer applications. However, self‐assembly is governed by a diversity of complex interparticle forces that cause fabricating defectless large scale (>1 cm) colloidal crystals, or opals, to be a daunting challenge. Despite numerous efforts to find an optimal method that offers the perfect colloidal crystal by minimizing defects, it has been difficult to provide physical interpretations that govern the development of defects such as grain boundaries. This study reports the control over grain domains and intentional defect characteristics that develop during evaporative vertical deposition. The degree of particle crystallinity and evaporation conditions is shown to govern the grain domain characteristics, such as shapes and sizes. In particular, the grains fabricated with 300 and 600 nm sphere diameters can be tuned into single‐column structures exceeding ≈1 mm by elevating heating temperature up to 93 °C. The understanding of self‐assembly physics presented in this work will enable the fabrication of novel self‐assembled structures with high periodicity and offer fundamental groundworks for developing large‐scale crack‐free structures.     

Multiple surface plasmon resonances and near-infrared field enhancement of gold nanowells

Arrays of Au nanowells (NWs) were fabricated by electron-beam lithography (EBL) and characterized by surface plasmon resonance (SPR) and surface-enhanced Raman scattering (SERS). It is revealed that these Au NW arrays exhibit multiple SP resonances that can be tuned by adjusting the geometrical characteristics of the NWs. SERS activity of Au NWs was confirmed for a range of excitation wavelengths and a number of model compounds including rhodamine 6G (R6G), phthalazine, and single-stranded oligonucleotides. According to numerical simulations based on the discrete dipole approximation (DDA), SERS enhancement originates from high electromagnetic fields (hot spots) localized both inside and outside individual NWs. In addition, far-field intercoupling effects between NWs have been observed experimentally in arrays with subwavelength pitch sizes. We show that the SERS enhancement factors can also be tuned and optimized by adjusting the geometry of NWs.     

Spherical Nanoparticle Arrays with Tunable Nanogaps and Their Hydrophobicity Enhanced Rapid SERS Detection by Localized Concentration of Droplet Evaporation

Periodic hexagonal spherical nanoparticle arrays are fabricated by a sacrificial colloidal monolayer template route by chemical deposition and further physical deposition. The regular network‐structured arrays are first templated by colloidal monolayers and then they are changed to novel periodic spherical nanoparticle arrays by further sputtering deposition due to multiple direction deposition and shadow effect between adjacent nanoparticles. The nanogaps between two adjacent spherical nanoparticles can be well tuned by controlling deposition time. Such periodic nanoparticle arrays with gold coatings demonstrate a very stable and high sensitive surface‐enhanced Raman scattering spectroscopy (SERS) performance. The periodic nanoparticle arrays with 10 nm gaps display much stronger SERS enhancement due to electromagnetic coupling. The chemically modified nanoparticle arrays show good hydrophobicity, which shorten process of detecting probe molecules using them as SERS‐active substrates by localized concentration of droplet evaporation and a low detection limit of 10⁻¹² m R6G can be achieved without solution wasting in a short time. The hydrophobic substrate offers a simple, convenient, and economical method to examine SERS performance by rapid concentration of solution on it and it is highly helpful to improve its practical applications in portable Raman detecting devices to detect organic molecules.     

Precision Synthesis: Designing Hot Spots over Hot Spots via Selective Gold Deposition on Silver Octahedra Edges

A major challenge in plasmonic hot spot fabrication is to efficiently increase the hot spot volumes on single metal nanoparticles to generate stronger signals in plasmon‐enhanced applications. Here, the synthesis of designer nanoparticles, where plasmonic‐active Au nanodots are selectively deposited onto the edge/tip hot spot regions of Ag nanoparticles, is demonstrated using a two‐step seed‐mediated precision synthesis approach. Such a “hot spots over hot spots” strategy leads to an efficient enhancement of the plasmonic hot spot volumes on single Ag nanoparticles. Through cathodoluminescence hyperspectral imaging of these selective edge gold‐deposited Ag octahedron (SEGSO), the increase in the areas and emission intensities of hot spots on Ag octahedra are directly visualized after Au deposition. Single‐particle surface‐enhanced Raman scattering (SERS) measurements demonstrate 10‐fold and 3‐fold larger SERS enhancement factors of the SEGSO as compared to pure Ag octahedra and non‐selective gold‐deposited Ag octahedra (NSEGSO), respectively. The experimental results corroborate well with theoretical simulations, where the local electromagnetic field enhancement of our SEGSO particles is 15‐fold and 1.3‐fold stronger than pure Ag octahedra and facet‐deposited particles, respectively. The growth mechanisms of such designer nanoparticles are also discussed together with a demonstration of the versatility of this synthetic protocol.     

2D Freestanding Janus Gold Nanocrystal Superlattices

2D freestanding nanocrystal superlattices represent a new class of advanced metamaterials in that they can integrate mechanical flexibility with novel optical, electrical, plasmonic, and magnetic properties into one multifunctional system. The freestanding 2D superlattices reported to date are typically constructed from symmetrical constituent building blocks, which have identical structural and functional properties on both sides. Here, a general ligand symmetry‐breaking strategy is reported to grow 2D Janus gold nanocrystal superlattice sheets with nanocube morphology on one side yet with nanostar on the opposite side. Such asymmetric metallic structures lead to distinct wetting and optical properties as well as surface‐enhanced Raman scattering (SERS) effects. In particular, the SERS enhancement of the nanocube side is about 20‐fold of that of the nanostar side, likely due to the combined “hot spot + lightening‐rod” effects. This is nearly 700‐fold of SERS enhancement as compared with the symmetric nanocube superlattices without Janus structures.     

Compartmentalized Jet Polymerization as a High‐Resolution Process to Continuously Produce Anisometric Microgel Rods with Adjustable Size and Stiffness

In the past decade, anisometric rod‐shaped microgels have attracted growing interest in the materials‐design and tissue‐engineering communities. Rod‐shaped microgels exhibit outstanding potential as versatile building blocks for 3D hydrogels, where they introduce macroscopic anisometry, porosity, or functionality for structural guidance in biomaterials. Various fabrication methods have been established to produce such shape‐controlled elements. However, continuous high‐throughput production of rod‐shaped microgels with simultaneous control over stiffness, size, and aspect ratio still presents a major challenge. A novel microfluidic setup is presented for the continuous production of rod‐shaped microgels from microfluidic plug flow and jets. This system overcomes the current limitations of established production methods for rod‐shaped microgels. Here, an on‐chip gelation setup enables fabrication of soft microgel rods with high aspect ratios, tunable stiffness, and diameters significantly smaller than the channel diameter. This is realized by exposing jets of a microgel precursor to a high intensity light source, operated at specific pulse sequences and frequencies to induce ultra‐fast photopolymerization, while a change in flow rates or pulse duration enables variation of the aspect ratio. The microgels can assemble into 3D structures and function as support for cell culture and tissue engineering.     

Preparation of gold nano-cones as surface-enhanced Raman scattering sensors for molecule detection

Surface-enhanced Raman spectroscopy (SERS) is a powerful novel analytical tool which integrates high levels of sensitivity for trace analysis of chemical and biomolecular species due to the massive enhancement of Raman signals by using nanometre-sized metal particles. However, SERS can be envisaged as an analytical tool only if substrates with strong, predictable and reproducible SERS enhancement can be produced. Here we have developed one simple Ar+ ions sputtering technology to prepare gold nano-cones array on silicon substrates as surface-enhanced Raman scattering (SERS)-active substrates. The tip of the gold cone-structures exhibited an extremely sharp curvature with an apex diameter of 20 nm and the interior apex angle of the nanocones was around 20 degrees. These samples were evaluated as potential SERS substrates using Rhodamine 6G molecules as molecule probe and exhibited SERS enhancement factor of greater than 10, originated from the localized electron field enhancement around the apex of cones and the surface plasmon coupling of periodic structures.     

Microfluidic Designing Microgels Containing Highly Concentrated Gold Nanoparticles for SERS Analysis of Complex Fluids

Surface‐enhanced Raman scattering (SERS) is one of the most promising methods to detect small molecules for point‐of‐care analysis as it is rapid, nondestructive, label‐free, and applicable for aqueous samples. Here, microgels containing highly concentrated yet evenly dispersed gold nanoparticles are designed to provide SERS substrates that simultaneously achieve contamination‐free metal surfaces and high signal enhancement and reproducibility. With capillary microfluidic devices, water‐in‐oil‐in‐water (W/O/W) double‐emulsion drops are prepared to contain gold nanoparticles and hydrogel precursors in innermost drop. Under hypertonic condition, water is selectively pumped out from the innermost drops. Therefore, gold nanoparticles are gently concentrated without forming aggregates, which are then captured by hydrogel matrix. The resulting microgels have a concentration of gold nanoparticles ≈30 times higher and show Raman intensity two orders of magnitude higher than those with no enrichment. In addition, even distribution of gold nanoparticles results in uniform Raman intensity, providing high signal reproducibility. Moreover, as the matrix of the microgel serves as a molecular filter, large adhesive proteins are rejected, which enables the direct detection of small molecules dissolved in the protein solution. It is believed that this advanced SERS platform is useful for in situ detection of toxic molecules in complex mixtures such as biological fluids, foods, and cosmetics.     

Pen‐on‐Paper Approach Toward the Design of Universal Surface Enhanced Raman Scattering Substrates

The translation of a technology from the laboratory into the real world should meet the demand of economic viability and operational simplicity. Inspired by recent advances in conductive ink pens for electronic devices on paper, we present a “pen‐on‐paper” approach for making surface enhanced Raman scattering (SERS) substrates. Through this approach, no professional training is required to create SERS arrays on paper using an ordinary fountain pen filled with plasmonic inks comprising metal nanoparticles of arbitrary shape and size. We demonstrate the use of plasmonic inks made of gold nanospheres, silver nanospheres and gold nanorods, to write SERS arrays that can be used with various excitation wavelengths. The strong SERS activity of these features allowed us to reach detection limits down to 10 attomoles of dye molecules in a sample volume of 10 μL, depending on the excitation wavelength, dye molecule and type of nanoparticles. Furthermore, such simple substrates were applied to pesticide detection down to 20 ppb. This universal approach offers portable, cost effective fabrication of efficient SERS substrates at the point of care. This approach should bring SERS closer to the real world through ink cartridges to be fixed to a pen to create plasmonic sensors at will.     

Inherently reproducible fabrication of plasmonic nanoparticle arrays for SERS by combining nanoimprint and copolymer lithography

We present an inherently reproducible route to realizing high-performance SERS substrates by exploiting a high-throughput top-down/bottom-up fabrication scheme. The fabrication route employs self-assembly of amphiphilic copolymers to create high-resolution molds for nanoimprint lithography (NIL) spanning entire 100 mm Si wafers. The nanoporous polymer templates obtained upon NIL are subjected to galvanic displacement reactions to create gold nanorod arrays. Nanorods are subsequently converted to nanodiscs by thermal annealing. The nanodiscs were found to perform as robust SERS substrates as compared with the nanorods. The SERS performance of these substrates and its generality for catering to diverse molecules is demonstrated through the excellent Raman peak resolution and intensity for three different molecules, exhibiting different interaction modes on surface. Numerical simulations using FDTD shows plasmonic coupling between the particles and also brings out the influence due to size distribution. The approach combines distinct advantages of high-precision and repeatability offered by NIL with low-cost fabrication of high-resolution NIL molds by copolymer self-assembly.     

Evidence of Plasmonic Coupling in Gallium Nanoparticles/Graphene/SiC

Graphene is emerging as a promising material for plasmonics applications due to its strong light-matter interactions, most of which are theoretically predicted but not yet experimentally realized. Therefore, the integration of plasmonic nanoparticles to create metal nanoparticle/graphene composites enables numerous phenomena important for a range of applications from photonics to catalysis. For these applications it is important to articulate the coupling of photon-based excitations such as the interaction between plasmons in each of the material components, as well as their charge-based interactions dependent upon the energy alignment at the metal/graphene interface. These coupled phenomena underpin an active application area in graphene-based composites due to nanoparticle-dependent surface-enhanced Raman scattering (SERS) of graphene phonon modes. This study reveals the coupling of a graphene/SiC support with Ga-nanoparticle-localized surface plasmon resonance, which is of particular interest due to its ability to be tuned across the UV into the near-IR region. This work is the first demonstration of the evolving plasmon resonance on graphene during the synthesis of surface-supported metal nanoparticles, thus providing evidence for the theoretically predicted screening revealed by a damped resonance with little energy shift. Therefore, the role of the graphene/substrate heterojunction in tailoring the plasmon resonance for nanoplasmonic applications is shown. Additionally, the coupled phenomena between the graphene-Ga plasmon properties, charge transfer, and SERS of graphene vibrational modes are explored.