Conductive PEDOT:PSS on surface-functionalized chitosan biopolymers for stretchable skin-like electronics

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a promising alternative transparent electrode to replace conventional indium tix oxide (ITO) for flexible and stretchable electronics. For their applications in optoelectronic devices, realizing both high conductivity and transmittance for the films is of great necessity as a suitable high performance transparent electrode. Here, we demonstrate simultaneously enhanced electrical and optical properties of PEDOT:PSS films prepared on chitosan bio-substrates by using an organic surface modifier, 11-aminoundecanoic acid (11-AA). The sheet resistance of PEDOT:PSS films decreases from 1120.8 to 292.8 Ω/sq with an increase in a transmittance from 75.9 to 80.4% by 11-AA treatment on the chitosan films. The functional groups of 11-AA effectively enhance the adhesion property at the interface between the chitosan substrate and PEDOT:PSS by forming strong interfacial bondings and decrease insulating PSS from PEDOT:PSS films. The wearable heater devices and on-skin sensors based on the 11-AA-treated PEDOT:PSS on the chitosan bio-substrates are successfully fabricated, showing the excellent thermal and sensing performances. The 11-AA surface-modification approach for highly conductive PEDOT:PSS on chitosan bio-substrates presents a great potential for applications toward transparent, flexible and stretchable electronics.     

Achieving High Efficiency and Improved Stability in ITO‐Free Transparent Organic Light‐Emitting Diodes with Conductive Polymer Electrodes

Efficient transparent organic light‐emitting diodes (OLEDs) with improved stability based on conductive, transparent poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) electrodes are reported. Based on optical simulations, the device structures are carefully optimized by tuning the thickness of doped transport layers and electrodes. As a result, the performance of PEDOT:PSS‐based OLEDs reaches that of indium tin oxide (ITO)‐based reference devices. The efficiency and the long‐term stability of PEDOT:PSS‐based OLEDs are significantly improved. The structure engineering demonstrated in this study greatly enhances the overall performances of ITO‐free transparent OLEDs in terms of efficiency, lifetime, and transmittance. These results indicate that PEDOT:PSS‐based OLEDs have a promising future for practical applications in low‐cost and flexible device manufacturing.     

Stretchable and Transparent Conductive PEDOT:PSS‐Based Electrodes for Organic Photovoltaics and Strain Sensors Applications

The development of transparent, conducting, and stretchable poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)‐based electrodes using a combination of a polyethylene oxide (PEO) polymer network and the surfactant Zonyl is reported. The latter improves the ductility of PEDOT:PSS and enables its deposition on hydrophobic surfaces such as polydimethylsiloxane (PDMS) elastomers, while the presence of a 3D matrix offers high electrical conductivity, elasticity, and mechanical recoverability. The resulting electrode exhibits attractive properties such as high electrical conductivity of up to 1230 S cm^?1 while maintaining high transparency of 95% at 550 nm. The potential of the electrode technology is demonstrated in indium‐tin‐oxide (ITO)‐free solar cells using the PBDB‐T‐2F:IT‐4F blend with a power conversion efficiency of 12.5%. The impact of repeated stretch‐and‐release cycles on the electrical resistance is also examined in the effort to evaluate the properties of the electrodes. The interpenetrated morphology of the PEDOT:PSS and polyethylene oxide network is found to exhibit beneficial synergetic effects resulting in excellent mechanical stretchability and high electrical conductivity. By carefully tuning the amount of additives, the ability to detect small changes in electrical resistance as a function of mechanical deformation is demonstrated, which enables the demonstration of stretchable and resilient on‐skin strain sensors capable of detecting small motions of the finger.     

Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as stand‐alone electrodes for organic solar cells have been optimized using a solvent post‐treatment method. The treated PEDOT:PSS films show enhanced conductivities up to 1418 S cm^?1, accompanied by structural and chemical changes. The effect of the solvent treatment on PEDOT:PSS has been investigated in detail and is shown to cause a reduction of insulating PSS in the conductive polymer layer. Using these optimized electrodes, ITO‐free, small molecule organic solar cells with a zinc phthalocyanine (ZnPc):fullerene C₆₀ bulk heterojunction have been produced on glass and PET substrates. The system was further improved by pre‐heating the PEDOT:PSS electrodes, which enhanced the power conversion efficiency to the values obtained for solar cells on ITO electrodes. The results show that optimized PEDOT:PSS with solvent and thermal post‐treatment can be a very promising electrode material for highly efficient flexible ITO‐free organic solar cells.     

Photovoltaic Devices: Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells (Adv. Funct. Mater. 6/2011)

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as stand‐alone electrodes for organic solar cells have been optimized using a solvent post‐treatment method. The treated PEDOT:PSS films show enhanced conductivities up to 1418 S cm^?1, accompanied by structural and chemical changes. The effect of the solvent treatment on PEDOT:PSS has been investigated in detail and is shown to cause a reduction of insulating PSS in the conductive polymer layer. Using these optimized electrodes, ITO‐free, small molecule organic solar cells with a zinc phthalocyanine (ZnPc):fullerene C₆₀ bulk heterojunction have been produced on glass and PET substrates. The system was further improved by pre‐heating the PEDOT:PSS electrodes, which enhanced the power conversion efficiency to the values obtained for solar cells on ITO electrodes. The results show that optimized PEDOT:PSS with solvent and thermal post‐treatment can be a very promising electrode material for highly efficient flexible ITO‐free organic solar cells.     

Comparison of dimethyl sulfoxide treated highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) electrodes for use in indium tin oxide-free organic electronic photovoltaic devices

Indium tin oxide (ITO)-free organic photovoltaic (OPV) devices were fabricated using highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as the transparent conductive electrode (TCE). The intrinsic conductivity of the PEDOT:PSS films was improved by two different dimethyl sulfoxide (DMSO) treatments – (i) DMSO was added directly to the PEDOT:PSS solution (PEDOT:PSS_ADD) and (ii) a pre-formed PEDOT:PSS film was immersed in DMSO (PEDOT:PSS_IMM). X-ray photoelectron spectroscopy (XPS) and conductive atomic force microscopy (CAFM) studies showed a large amount of PSS was removed from the PEDOT:PSS_IMM electrode surface. OPV devices based on a poly(3-hexylthiophene):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) bulk hetrojunction showed that the PEDOT:PSS_IMM electrode out-performed the PEDOT:PSS_ADD electrode, primarily due to an increase in short circuit current density from 6.62 mA cm⁻² to 7.15 mA cm⁻². The results highlight the importance of optimising the treatment of PEDOT:PSS electrodes and demonstrate their potential as an alternative TCE for rapid processing and low-cost OPV and other organic electronic devices.     

High conductive PEDOT via post-treatment by halobenzoic for high-efficiency ITO-free and transporting layer-free organic solar cells

The 4-halobenzoics (XBA) including 4-fluorobenzoic acid (FBA), 4-chlorobenzoic acid (CBA), 4-bromobenzoic acid (BBA) and 4-iodobenzoic acid (IBA) have been applied to modify poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) by simply spin-coating solvent treatment. A universal and significant improvement in the conductivity of PEDOT:PSS (from ∼1 S/cm to more than 3300 S/cm) has been achieved by XBA modification, which results from the acid XBA-induced phase segregation, depletion of PSS chains and the conformational change of the conductive PEDOT chains. Especially, the oxidation CBA treated PEDOT:PSS exhibits low sheet resistance of 43 Ω/sq and transparency of over 80% in the visible range, which are comparable to those of indium tin oxide (ITO). The modified PEDOT:PSS has been facilely applied as the transparent anode for high-efficiency ITO-free organic solar cell device without hole transport layer. The high power conversion efficiency of 7.9% has been achieved by employing CBA treated PEDOT:PSS as anode for ITO-free device based on poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)] (PTB7-Th):[6,6]-phenyl-C71 butyric acid methyl ester (PC₇₁BM), which is comparable to the corresponding devices based on the traditional ITO anode.     

Highly Conductive Poly(3,4‐ethylenedioxythiophene):Poly (styrenesulfonate) Films Using 1‐Ethyl‐3‐methylimidazolium Tetracyanoborate Ionic Liquid

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films are obtained using ionic liquids as additives. Upon adding 1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB) to the conducting polymer, the conductivity increases to 2084 S cm^?1; this is attributed to the phase separation of PSS leading to a structural change in the film. A comparative study with 1‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMIM BF₄) shows that EMIM TCB gives higher conductivity and transmittance and can be regarded as one of the most promising additives for the preparation of indium tin oxide (ITO)‐free organic devices using PEDOT:PSS/EMIM TCB as electrodes.     

Efficient ITO-free organic light-emitting diodes comprising PEDOT:PSS transparent electrodes optimized with 2-ethoxyethanol and post treatment

We demonstrate highly conductive poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) films introduced with a newly investigated solvent 2-ethoxyethanol. The films are optimized by simple solvent post treatment and show enhanced conductivities and reduced sheet resistances. Solvent post treatment for 2-ethoxyethanol added PEDOT:PSS films reduces insulating PSS and forms conductive PEDOT networks in conductive films, resulting in improved electrical properties. ITO-free white OLEDs are fabricated with post-treated PEDOT:PSS electrodes and show almost equal performance to ITO-based OLEDs. Our work demonstrate that the conductive PEDOT:PSS electrode optimized by 2-ethoxyethanol and post treatment promises its potential as alternative transparent electrode in flexible, low-cost, high-performance ITO-free OLEDs.     

Highly conductive PEDOT:PSS film by doping p-toluenesulfonic acid and post-treatment with dimethyl sulfoxide for ITO-free polymer dispersed liquid crystal device

In this paper, the highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film realized by applying the doping technique and the post-treatment process is demonstrated. The conductivity of the spin coated PEDOT:PSS film enhanced greatly from 0.7 S/cm to 736 S/cm after 1.25% of p-toluenesulfonic acid solution (50 wt%) was doped into the PEDOT:PSS aqueous dispersion. The post-treatment using dimethyl sulfoxide further improved the conductivity to 1549 S/cm. The highly conductive PEDOT:PSS film was used as transparent electrode to fabricate ITO-free polymer dispersed liquid crystal (PDLC) cell. The experimental results showed that the electro-optical properties of the PDLC cell fabricated by the highly conductive PEDOT:PSS film were comparable to those of the PDLC cell constructed by ITO. This study reveals that the highly conductive PEDOT:PSS film is a prospective material for manufacturing ITO-free liquid crystal devices.     

Screen‐Printed Poly(3,4‐Ethylenedioxythiophene):Poly(Styrenesulfonate) Grids as ITO‐Free Anodes for Flexible Organic Light‐Emitting Diodes

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) grids have been successfully constructed by roll‐to‐roll compatible screen‐printing techniques and have been used as indium tin oxide (ITO)‐free anodes for flexible organic light‐emitting diodes (OLEDs). The grid‐type transparent conductive electrodes (TCEs) can adopt thicker PEDOT: PSS grid lines to ensure the conductivity, while the mesh‐like grid structure can play an important role to maintain high optical transparency. By adjusting grid periods, grid thickness and treatment of organic additives, PEDOT: PSS TCEs with high optical transparency, low sheet resistance, and excellent mechanical flexibility have been achieved. Using the screen‐printed PEDOT: PSS grids as the anodes, ITO‐free OLEDs achieved peak current efficiency of 3.40 cd A^?1 at the current density of 10 mA cm^?2, which are 1.56 times better than the devices with ITO glass as the anodes. The improved efficiency is attributed to the light extraction effect and improved transparency by the grid structure. The superior optoelectronic performances of OLEDs based on flexible screen‐printed PEDOT: PSS grid anodes suggest their great prospects as ITO‐free anodes for flexible and wearable electronic applications.     

Highly Conductive and Environmentally Stable Organic Transparent Electrodes Laminated with Graphene

Improving the lifetime and the operational and thermal stability of organic thin‐film materials while maintaining high conductivity and mechanical flexibility is critical for flexible electronics applications. Here, it is reported that highly conductive and environmentally stable organic transparent electrodes (TEs) can be fabricated by mechanically laminating poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) films containing dimethylsulfoxide and Zonyl fluorosurfactant (PDZ films) with a monolayer graphene barrier. The proposed lamination process allows graphene to be coated onto the PDZ films uniformly and conformally with tight interfacial binding, free of wrinkles and air gaps. The laminated films exhibit an outstanding room‐temperature hole mobility of ≈85.1 cm² V^?1 s^?1 since the graphene can serve as an effective bypass for charge carriers. The significantly improved stability of the graphene‐laminated TEs against high mechanical/thermal stress, humidity, and ultraviolet irradiation is particularly promising. Furthermore, the incorporation of the graphene barrier increases the expected lifetime of the TEs by more than two orders of magnitude.     

Highly Robust Indium‐Free Transparent Conductive Electrodes Based on Composites of Silver Nanowires and Conductive Metal Oxides

A hybrid approach for the realization of In‐free transparent conductive layers based on a composite of a mesh of silver nanowires (NWs) and a conductive metal‐oxide is demonstrated. As metal‐oxide room‐temperature‐processed sol–gel SnO_x or Al:ZnO prepared by low‐temperature (100 °C) atomic layer deposition is used, respectively. In this concept, the metal‐oxide is intended to fuse the wires together and also to “glue” them to the substrate. As a result, a low sheet resistance down to 5.2 Ω sq^‐1 is achieved with a concomitant average transmission of 87%. The adhesion of the NWs to the substrate is significantly improved and the resulting composites withstand adhesion tests without loss in conductivity. Owing to the low processing temperatures, this concept allows highly robust, highly conductive, and transparent coatings even on top of temperature sensitive objects, for example, polymer foils, organic devices. These Indium‐ and PEDOT:PSS‐free hybrid layers are successfully implemented as transparent top‐electrodes in efficient all‐solution‐processed semitransparent organic solar cells. It is obvious that this approach is not limited to organic solar cells but will generally be applicable in devices which require transparent electrodes.     

Stretchable ITO-Free Organic Solar Cells with Intrinsic Anti-Reflection Substrate for High-Efficiency Outdoor and Indoor Energy Harvesting

Flexible photovoltaic devices are promising candidates for triggering the Internet of Things (IoT). However, the power conversion efficiencies (PCEs) of flexible organic photovoltaic (OPV) devices with high conductivity poly(3,4-ethylene dioxythiophene):polystyrene sulfonate (PEDOT:PSS) electrodes on plastic are lagging behind the rigid devices due to the low transmittance of polyethylene terephthalate (PET)/PEDOT:PSS. Moreover, the poor stretchability of the commonly used plastic substrates largely hinders the practical application of wearable devices. Herein, a novel stretchable indium tin oxide (ITO)-free OPV device with a surface-texturing polydimethylsiloxane (PDMS) substrate for outdoor strong- and indoor dim-light energy harvesting is reported. The high diffuse transmittance and haze effect of the substrate enable stretchable ITO-free devices, yielding a high PCE of 15.3% under 1 sun illumination. More excitingly, the stretchable device based on textured PDMS/PEDOT:PSS maintains a comparable PCE of 20.5% (20.8% for the rigid device) under indoor light illumination. Notably, the stretchable device is much more insensitive to the light direction, maintaining 38.5% of the initial PCE at an extremely small incident angle of 10° (16.3% for glass/ITO-based counterpart). The texturing stretchable substrate provides a new direction for achieving high performance and enhanced light utilization for the stretchable light-harvesting device, suitable for indoor and outdoor applications.     

Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells

Parasitic absorption in transparent electrodes is one of the main roadblocks to enabling power conversion efficiencies (PCEs) for perovskite‐based tandem solar cells beyond 30%. To reduce such losses and maximize light coupling, the broadband transparency of such electrodes should be improved, especially at the front of the device. Here, the excellent properties of Zr‐doped indium oxide (IZRO) transparent electrodes for such applications, with improved near‐infrared (NIR) response, compared to conventional tin‐doped indium oxide (ITO) electrodes, are shown. Optimized IZRO films feature a very high electron mobility (up to ≈77 cm² V^?1 s^?1), enabling highly infrared transparent films with a very low sheet resistance (≈18 Ω □^?1 for annealed 100 nm films). For devices, this translates in a parasitic absorption of only ≈5% for IZRO within the solar spectrum (250–2500 nm range), to be compared with ≈10% for commercial ITO. Fundamentally, it is found that the high conductivity of annealed IZRO films is directly linked to promoted crystallinity of the indium oxide (In₂O₃) films due to Zr‐doping. Overall, on a four‐terminal perovskite/silicon tandem device level, an absolute 3.5 mA cm^?2 short‐circuit current improvement in silicon bottom cells is obtained by replacing commercial ITO electrodes with IZRO, resulting in improving the PCE from 23.3% to 26.2%.     

A highly conductive and smooth AgNW/PEDOT:PSS film treated by hot-pressing as electrode for organic light emitting diode

A highly conductive, smooth and transparent electrode is developed by coating poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) over silver nanowires (AgNWs) followed by a hot-pressing method. The hot-pressed AgNW/PEDOT:PSS film shows a low sheet resistance of 12 Ω/square, a transmittance of 83% at 550 nm and a smooth surface. The improvement of the conductivity and smoothness are ascribed to the fusion of nanowires resulted from the mechanical hot-pressing. The AgNW/PEDOT:PSS film on polyethylene naphthalate (PEN) substrate exhibits higher conductive stability against the bending test than commonly used indium tin oxide (ITO). Using the hot-pressed AgNW/PEDOT:PSS film as the anode, we have fabricated ITO-free organic light emitting diode with a maximum current efficiency of 58.2 cd/A, which is higher than the device with ITO anode. This proves that such AgNW/PEDOT:PSS film treated by hot-pressing is a promising candidate for flexible optoelectronic devices.     

Anode Interfacial Tuning via Electron‐Blocking/Hole‐Transport Layers and Indium Tin Oxide Surface Treatment in Bulk‐Heterojunction Organic Photovoltaic Cells

The effects of anode/active layer interface modification in bulk‐heterojunction organic photovoltaic (OPV) cells is investigated using poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and/or a hole‐transporting/electron‐blocking blend of 4,4′‐bis[(p‐trichlorosilylpropylphenyl)‐phenylamino]biphenyl (TPDSi₂) and poly[9,9‐dioctylfluorene‐co‐N‐[4‐(3‐methylpropyl)]‐diphenylamine] (TFB) as interfacial layers (IFLs). Current–voltage data in the dark and AM1.5G light show that the TPDSi₂:TFB IFL yields MDMO‐PPV:PCBM OPVs with substantially increased open‐circuit voltage (V_oc), power conversion efficiency, and thermal stability versus devices having no IFL or PEDOT:PSS. Using PEDOT:PSS and TPDSi₂:TFB together in the same cell greatly reduces dark current and produces the highest V_oc (0.91 V) by combining the electron‐blocking effects of both layers. ITO anode pre‐treatment was investigated by X‐ray photoelectron spectroscopy to understand why oxygen plasma, UV ozone, and solvent cleaning markedly affect cell response in combination with each IFL. O₂ plasma and UV ozone treatment most effectively clean the ITO surface and are found most effective in preparing the surface for PEDOT:PSS deposition; UV ozone produces optimum solar cells with the TPDSi₂:TFB IFL. Solvent cleaning leaves significant residual carbon contamination on the ITO and is best followed by O₂ plasma or UV ozone treatment.     

Selectively modulated inkjet printing of highly conductive and transparent foldable polymer electrodes for flexible polymer light-emitting diode applications

High efficient flexible polymer light-emitting devices which composed with highly conductive and transparent foldable polymer electrodes were fabricated. New doping materials, n-methyl-2-pyrrolidone (NMP) and n-methylformamide (NMF), have much improved the conductivity of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The selectively modulated inkjet-printing method facilitated the PEDOT:PSS’s application to both transparent anodes and highly conductive bus line electrodes. Multiple-time printed PEDOT:PSS electrodes showed a similar performance to Ag bus lines while one-time printed anode showed a much better figure of merit than that of ITO on plastic. Due to the flexible property, high transparency and high work function of the polymeric anode, ITO-free PLEDs showed a high performance with foldable characteristics.     

Stable Inverted Polymer/Fullerene Solar Cells Using a Cationic Polythiophene Modified PEDOT:PSS Cathodic Interface

A cationic and water‐soluble polythiophene [poly[3‐(6‐pyridiniumylhexyl)thiophene bromide] (P3PHT⁺Br^?)] is synthesized and used in combination with anionic poly(3,4‐ethylenedioxythiophene):poly(p‐styrenesulfonate) (PEDOT:PSS)^? to produce hybrid coatings on indium tin oxide (ITO). Two coating strategies are established: i) electrostatic layer‐by‐layer assembly with colloidal suspensions of (PEDOT:PSS)^?, and ii) modification of an electrochemically prepared (PEDOT:PSS)^? film on ITO. The coatings are found to modify the work function of ITO such that it could act as a cathode in inverted 2,5‐diyl‐poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) polymer photovoltaic cells. The interfacial modifier created from the layer‐by‐layer assembly route is used to produce efficient inverted organic photovoltaic devices (power conversion efficiency ～2%) with significant long‐term stability in excess of 500 h.     

Oxidised carbon nanotubes as solution processable,high work function hole-extraction layers for organic solar cells

For efficient hole-extraction in solution processed organic solar cells the transparent indium-tin oxide (ITO) electrode is invariably pre-coated with a thin layer of the high work function conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate). Herein we show that thin films of partially oxidised multi-wall and single-wall carbon nanotubes are equally effective at facilitating hole-extraction in efficient (～2.7%) bulk-heterojunction organic solar cells based on poly(3-hexylthiophene) (P3HT): [6,6]-phenyl-C₆₁ butyric acid methyl ester (PCBM) blends. Crucially, in contrast to PEDOT:PSS, deposition is from aqueous solutions of low acidity (pH 6–7) ensuring compatibility with ITO and other emerging conducting oxides. Furthermore, thin oxidised carbon nanotube films offer greater transparency in the near-infrared as compared to PEDOT:PSS films of comparable thickness. The functionality of these nano-structured films is demonstrated in relatively large area devices (～0.35 cm²) and the performance rationalised based on measurements of the electronic structure and morphology.