Spin‐ and Spray‐Deposited Single‐Walled Carbon‐Nanotube Electrodes for Organic Solar Cells

Organic bulk‐heterojunction solar cells using thin‐film single‐walled carbon‐nanotube (SWCNT) anodes deposited on glass are reported. Two types of SWCNT films are investigated: spin‐coated films from dichloroethane (DCE), and spray‐coated films from deionized water using sodium dodecyl sulphate (SDS) or sodium dodecyl benzene sulphonate (SDBS) as the surfactant. All of the films are found to be mechanically robust, with no tendency to delaminate from the underlying substrate during handling. Acid treatment with HNO₃ yields high conductivities >1000 S cm^?1 for all of the films, with values of up to 7694 ± 800 S cm^?1 being obtained when using SDS as the surfactant. Sheet resistances of around 100 Ω sq^?1 are obtained at reasonable transmission, for example, 128 ± 2 Ω sq^?1 at 90% for DCE, 57 ± 3 Ω sq^?1 at 65% for H₂O:SDS, and 68 ± 5 Ω sq^?1 at 70% for H₂O:SDBS. Solar cells are fabricated by successively coating the SWCNT films with poly(3,4‐ethylenedioxythiophene):poly(styrene sulphonate) (PEDOT:PSS), a blend of regioregular poly(3‐hexylthiophene) (P3HT) and 1‐(3‐methoxy‐carbonyl)‐propyl‐1‐phenyl‐(6,6)C₆₁ (PCBM), and LiF/Al. The resultant devices have respective power conversions of 2.3, 2.2 and 1.2% for DCE, H₂O:SDS and H₂O:SDBS, with the first two being at a virtual parity with reference devices using ITO‐coated glass as the anode (2.3%).     

Electrochemical Properties of High‐Power Supercapacitors Using Single‐Walled Carbon Nanotube Electrodes

We have investigated the key factors determining the performance of supercapacitors constructed using single‐walled carbon nanotube (SWNT) electrodes. Several parameters, such as composition of the binder, annealing temperature, type of current collector, charging time, and discharging current density have been optimized for the best performance of the supercapacitor with respect to energy density and power density. We find a maximum specific capacitance of 180 F/g and a measured power density of 20 kW/kg at energy densities in the range from 7 to 6.5 Wh/kg at 0.9 V in a solution of 7.5 N KOH (the currently available supercapacitors have energy densities in the range 6–7 Wh/kg and power density in the range 0.2–5 kW/kg at 2.3 V in non‐aqueous solvents).     

Near‐Infrared Saturable Absorption of Defective Bulk‐Structured WTe2 for Femtosecond Laser Mode‐Locking

Mono‐ and few‐layer transition metal dichalcogenides (TMDCs) have been widely used as saturable absorbers for ultrashort laser pulse generation, but their preparation is complicated and requires much expertise. The possible use of bulk‐structured TMDCs as saturable absorbers is therefore a very intriguing and technically important issue in laser technology. Here, for the first time, it is demonstrated that defective, bulk‐structured WTe₂ microflakes can serve as a base saturable absorption material for fast mode‐lockers that can produce femtosecond pulses from fiber laser cavities. They have a modulation depth of 2.85%, from which stable laser pulses with a duration of 770 fs are readily obtained at a repetition rate of 13.98 MHz and a wavelength of 1556.2 nm, which is comparable to the performance achieved using mono‐ and few‐layer TMDCs. Density functional theory calculations show that the oxidative and defective surfaces of WTe₂ microflakes do not degrade their saturable absorption performance in the near‐infrared range, allowing for a broad range of operative bandwidth. This study suggests that saturable absorption is an intrinsic property of TMDCs without relying on their structural dimensionality, providing a new direction for the development of TMDC‐based saturable absorbers.     

Light‐Switchable Single‐Walled Carbon Nanotubes Based on Host–Guest Chemistry

A new type of light‐switchable “smart” single‐walled carbon nanotube (SWNTs) is developed by the reversible host–guest interaction between azobenzene‐terminal PEO (AzoPEO) and pyrene‐labeled host attached on the sidewalls of nanotubes via π–π stacking. The SWNTs hybrids not only are well dispersed in pure water, but also exhibit switchable dispersion/aggregation states upon the alternate irradiation of UV and visible light. Moreover, the SWNTs hybrids dispersion is preliminarily used as coating fluid to form transparent conductive films. The dispersant AzoPEO is removed by the contamination‐free UV treatment, decreasing the resistance of the films. This kind of light‐switchable SWNTs hybrids, possessing a ‘‘green’’ trigger and intact structure of the nanotube, may find potential applications in sensor of biomedicines, device fabrication, etc. Additionally, such a reversible host–guest interaction system may open up the possibility to control the dispersion state of SWNTs by other common polymers.     

Synthesis and Properties of a Water‐Soluble Single‐Walled Carbon Nanotube–Poly(m‐aminobenzene sulfonic acid) Graft Copolymer

Poly(m‐aminobenzene sulfonic acid) (PABS), was covalently bonded to single‐walled carbon nanotubes (SWNTs) to form a water‐soluble nanotube–polymer compound (SWNT–PABS). The conductivity of the SWNT–PABS graft copolymer was about 5.6 × 10^–3 S cm^–1, which is much higher than that of neat PABS (5.4 × 10^–7 S cm^–1). The mid‐IR spectrum confirmed the formation of an amide bond between the SWNTs and PABS. The ¹H NMR spectrum of SWNT–PABS showed the absence of free PABS, while the UV/VIS/NIR spectrum of SWNT–PABS showed the presence of the interband transitions of the semiconducting SWNTs and an absorption at 17 750 cm^–1 due to the PABS addend.     

Growth of Single‐Walled Carbon Nanotubes from Microcontact‐Printed Catalyst Patterns on Thin Si3N4 Membranes

Single‐walled carbon nanotubes have been grown by chemical vapor deposition from methane and hydrogen on catalyst patterns prepared by microcontact printing on 20 nm thick silicon nitride substrates. A higher yield of single‐walled carbon nanotubes was obtained by the simple expedient of introducing hydrogen during deposition. Based on atomic force microscopy and transmission electron microscopy measurements, we found that high‐quality single‐walled carbon nanotubes with a broad diameter distribution were obtained.     

Boosting the Non Linear Optical Response of Carbon Nanotube Saturable Absorbers for Broadband Mode‐Locking of Bulk Lasers

Single‐walled carbon‐nanotube absorbers are experimentally demonstrated for laser mode‐locking. A saturable absorber device is used to mode‐lock three different bulk solid‐state lasers in a 500 nm‐wide wavelength interval. The devices exhibit a low saturation fluence of <10 µJ cm^?2, low scattering losses, and an exceptionally rapid relaxation, with time constants reaching <100 fs. The latter two properties are explained by a decreased curling tendency and increased tube‐to‐tube interactions of the nanotubes, respectively. These properties are the result of an optimized manufacturing procedure in combination with the use of a starting material with a higher microscopic order. The decreased scattering enables universal use of these devices in bulk solid‐state lasers, which tend to be highly sensitive against non‐saturable device losses as caused by scattering. The favorable saturable absorption properties are experimentally verified by mode‐locking the three lasers, which all exhibit near transform‐limited performance with about 100 fs pulse duration. The complete and unconditional absence of Q‐switching side bands verifies the small saturation fluence of these devices.     

Microwave‐Induced Controlled Purification of Single‐Walled Carbon Nanotubes without Sidewall Functionalization

A microwave‐induced controlled method for the purification of single‐walled carbon nanotubes (SWCNTs) by removing residual metal catalysts and carbonaceous impurities is reported. Compared to conventional strong acid treatment, this one‐step method uses dilute acids and complexing agents and reduces the reaction times to the order of minutes. Furthermore, the SWCNTs retain their chemical and physical properties and are not functionalized. Electron microscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and atomic absorption (AA) spectrometry studies were used to characterize the purified SWCNTs.     

Recent Advances in Applications of Sorted Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWCNTs) exhibit outstanding properties that make them appealing in a wide range of applications. However, their properties are variable depending on the tube helicity (chirality), which has been a challenge for a long time and needs to be effectively controlled. In recent years, tremendous efforts have been made to control the electrical type/chirality of nanotubes through both direct controlled synthesis and postsynthesis separation methods. Driven by these breakthroughs, the applications of separated families of SWCNTs in various fields have emerged as a new topic of research. In this Review, an overview of recent advances in the use of highly purified and well‐separated SWCNTs in a comprehensive range of applications is presented including photovoltaics, transistors, batteries, sensors, light emitters, biological/medical fields, and others. Finally, important future directions for the utilization of separated SWCNTs in these fields are provided.     

Carbon Fiber–Bismaleimide Composites Filled with Nickel‐Coated Single‐Walled Carbon Nanotubes for Lightning‐Strike Protection

Multifunctional carbon fiber composites are imperative for next‐generation lightweight aircraft structures. However, lightning‐strike protection is a feature that is lacking in many modern carbon fiber high‐temperature polymer systems, due to their high electrical resistivity. This work presents a study on processing, materials optimization, and property development of high‐temperature bismaleimide (BMI)–carbon fiber composites filled with nickel‐coated single‐walled carbon nanotubes (Ni‐SWNTs) based on three key factors: i) dispersion of Ni‐SWNTs, ii) their surface coverage on the carbon plies and, iii) the composite surface resistivity. Atomic force microscopy analysis revealed that coating purified SWNTs with nickel enabled improved dispersion which resulted in uniform surface coverage on the carbon plies. The electrical resistivity of the baseline composite system was reduced by ten orders of magnitude by the addition of 4 wt% Ni‐SWNTs (calculated with respect to the weight of a single carbon ply). Ni‐SWNT–filled composites showed a reduced amount of damage to simulated lightning strike compared to their unfilled counterparts, as indicated by the minimal carbon fiber pull‐out.     

Polyazines and Polyazomethines with Didodecylthiophene Units for Selective Dispersion of Semiconducting Single‐Walled Carbon Nanotubes

Polymer wrapped single‐walled carbon nanotubes (SWNTs) have been demonstrated to be a very efficient technique to obtain high purity semiconducting SWNT solutions. However, the extraction yield of this technique is low compared to other techniques. Poly‐alkyl‐thiophenes have been reported to show higher extraction yield compare to polyfluorene derivatives. Here, the affinity for semiconducting SWNTs of two polymers with a backbone containing didodecylthiophene units interspersed with N atoms is reported. It is demonstrated that one of the polymers, namely, poly(2,5‐dimethylidynenitrilo‐3,4‐didodecylthienylene) (PAMDD), has very high semiconducting SWNT extraction yield compared to the poly(3,4‐didodecylthienylene)azine (PAZDD). The dissimilar wrapping efficiency of these two polymers for semiconducting SWNTs is attributed to the interplay between the affinity for the nitrogen atoms of the highly polarizable walls of SWNTs and the mechanical flexibility of the polymer backbones. Photoluminescence (PL) measurements demonstrate the presence of metallic tubes and SWNT bundles in the sample selected with PAZDD and higher purity of SWNT‐PAMDD samples. The high purity of the semiconducting SWNTs selected by PAMDD is further demonstrated by the high performance of the solution‐processed field‐effect transistors (FETs) fabricated using a blade coating technique, which exhibit hole mobilities up to 33.3 cm² V^?1 s^?1 with on/off ratios of 10⁶.     

Charged Rod‐Like Nanoparticles Assisting Single‐Walled Carbon Nanotube Dispersion in Water

A new dispersant for stabilization of single wall carbon nanotubes (SWNTs) in water that simultaneously utilizes three different dispersion or stabilization mechanisms: surfactant adsorption, polymeric wrapping, and Coulomb repulsive interaction, has been demonstrated. The new dispersant, a charged rod‐like nanoparticle (cROD), is a cylindrical micelle wrapped by negatively charged polymers which is fabricated by the aqueous free radical polymerization of a polymerizable cationic surfactant, cetyltrimethylammonium 4‐vinylbenzoate (CTVB), in the presence of sodium 4‐styrenesulfonate (NaSS). The surface charge density of the cRODs is controlled by varying the concentration of NaSS. Dispersions of SWNTs are obtained by sonicating a mixture of SWNTs and cROD in water, followed by ultra‐centrifugation and decanting. While the cRODs with neutral or low surface change densities (0 and 5 mol % NaSS) result in very low dispersion power and poor stability, the cRODs with high surface charge densities (15, 25, and 40 mol % NaSS) produce excellent dispersions with SWNT concentration as high as 437 mg L^?1 and long term stability. The sharp van Hove transition peaks of the cROD assisted SWNT dispersions indicate the presence of individually isolated SWNTs. Atomic force microscopy and small angle neutron scattering analysis show that the dominant encapsulation structure of the cROD assisted SWNTs is surfactant assisted polymeric wrapping. SWNTs dispersed by the cRODs can be fully dried and easily re‐dispersed in water, providing enhanced processibility of SWNTs.     

Selective Electrochemical Etching of Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) are a promising material for future nanotechnology. However, their applications are still limited in success because of the co‐existence of metallic SWNTs and semiconducting SWNTs produced samples. Here, electrochemical etching, which shows both diameter and electrical selectivity, is demonstrated to remove SWNTs. With the aid of a back‐gate electric field, selective removal of metallic SWNTs is realized, resulting in high‐performance SWNT field‐effect transistors with pure semiconducting SWNT channels. Moreover, electrochemical etching is realized on a selective area. These findings would be valuable for research and the application of SWNTs in electrochemistry and in electronic devices.     

Non‐Volatile Organic Memory Elements Based on Carbon‐Nanotube‐Enabled Vertical Field‐Effect Transistors

High‐performance non‐volatile memory elements based on carbon‐nanotube‐enabled vertical field‐effect transistors (CN‐VFETs) are demonstrated. A thin crosslinking polymer layer, benzocyclobutene (BCB), on top of the gate dielectric acts as the charge storage layer. This results in a large, fully gate sweep programmable, hysteresis in the cyclic transfer curves exhibiting on/off ratios >4 orders of magnitude. The carbon nanotube random network source electrode facilitates charge injection into the charge storage layer, realizing the strong memory effect without sacrificing mobility in the vertical channel. Given their intrinsically simple fabrication and compact size CN‐VFETs could provide a path to cost‐effective, high‐density organic memory devices.     

Octadecylamine‐Functionalized Single‐Walled Carbon Nanotubes for Facilitating the Formation of a Monolithic Perovskite Layer and Stable Solar Cells

Organic–inorganic lead halide perovskites have shown great future for application in solar cells owing to their exceptional optical and electronic properties. To achieve high‐performance perovskite solar cells, a perovskite light absorbing layer with large grains is desirable in order to minimize grain boundaries and recombination during the operation of the device. Herein, a simple yet efficient approach is developed to synthesize perovskite films consisting of monolithic‐like grains with micrometer size through in situ deposition of octadecylamine functionalized single‐walled carbon nanotubes (ODA‐SWCNTs) onto the surface of the perovskite layer. The ODA‐SWCNTs form a capping layer that controls the evaporation rate of organic solvents in the perovskite film during the postthermal treatment. This favorable morphology in turn dramatically enhances the short‐circuit current density of the perovskite solar cells and almost completely eliminates the hysteresis. A maximum power conversion efficiency of 16.1% is achieved with an ODA‐SWCNT incorporated planar solar cell using (FA_0.83MA_0.17)_0.95Cs_0.05Pb(I_0.83Br_0.17)₃ as light absorber. Furthermore, the perovskite solar cells with ODA‐SWCNT demonstrate extraordinary stability with performance retention of 80% after 45 d stability testing under high humidity (60–90%) environment. This work opens up a new avenue for morphology manipulation of perovskite films and enhances the device stability using carbon material.     

A Multiwalled‐Carbon‐Nanotube‐Based Biosensor for Monitoring Microcystin‐LR in Sources of Drinking Water Supplies

A multiwalled carbon nanotube (MWCNT)‐based electrochemical biosensor is developed for monitoring microcystin‐LR (MC‐LR), a toxic cyanobacterial toxin, in sources of drinking water supplies. The biosensor electrodes are fabricated using vertically well‐aligned, dense, millimeter‐long MWCNT arrays with a narrow size distribution, grown on patterned Si substrates by water‐assisted chemical vapor deposition. High temperature thermal treatment (2500 °C) in an Ar atmosphere is used to enhance the crystallinity of the pristine materials, followed by electrochemical functionalization in alkaline solution to produce oxygen‐containing functional groups on the MWCNT surface, thus providing the anchoring sites for linking molecules that allow the immobilization of MC‐LR onto the MWCNT array electrodes. Addition of the monoclonal antibodies specific to MC‐LR in the incubation solutions offers the required sensor specificity for toxin detection. The performance of the MWCNT array biosensor is evaluated using micro‐Raman spectroscopy, including polarized Raman measurements, X‐ray photoelectron spectroscopy, cyclic voltammetry, optical microscopy, and Faradaic electrochemical impedance spectroscopy. A linear dependence of the electron‐transfer resistance on the MC‐LR concentration is observed in the range of 0.05 to 20 μg L^?1, which enables cyanotoxin monitoring well below the World Health Organization (WHO) provisional concentration limit of 1 μg L^?1 for MC‐LR in drinking water.     

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

Traditional silicon solar cells extract holes and achieve interface passivation with the use of a boron dopant and dielectric thin films such as silicon oxide or hydrogenated amorphous silicon. Without these two key components, few technologies have realized power conversion efficiencies above 20%. Here, a carbon nanotube ink is spin coated directly onto a silicon wafer to serve simultaneously as a hole extraction layer, but also to passivate interfacial defects. This enables a low‐cost fabrication process that is absent of vacuum equipment and high‐temperatures. Power conversion efficiencies of 21.4% on an device area of 4.8 cm² and 20% on an industrial size (245.71 cm²) wafer are obtained. Additionally, the high quality of this passivated carrier selective contact affords a fill factor of 82%, which is a record for silicon solar cells with dopant‐free contacts. The combination of low‐dimensional materials with an organic passivation is a new strategy to high performance photovoltaics.     

Covalent Surface Modification Effects on Single‐Walled Carbon Nanotubes for Targeted Sensing and Optical Imaging

Optical nanoscale technologies often implement covalent or noncovalent strategies for the modification of nanoparticles, whereby both functionalizations are leveraged for multimodal applications but can affect the intrinsic fluorescence of nanoparticles. Specifically, single‐walled carbon nanotubes (SWCNTs) can enable real‐time imaging and cellular delivery; however, the introduction of covalent SWCNT sidewall functionalizations often attenuates SWCNT fluorescence. Recent advances in SWCNT covalent functionalization chemistries preserve the SWCNT's pristine graphitic lattice and intrinsic fluorescence, and here, such covalently functionalized SWCNTs maintain intrinsic fluorescence‐based molecular recognition of neurotransmitter and protein analytes. The covalently modified SWCNT nanosensor preserves its fluorescence response towards its analyte for certain nanosensors, presumably dependent on the intermolecular interactions between SWCNTs or the steric hindrance introduced by the covalent functionalization that hinders noncovalent interactions with the SWCNT surface. These SWCNT nanosensors are further functionalized via their covalent handles with a targeting ligand, biotin, to self‐assemble on passivated microscopy slides, and these dual‐functionalized SWCNT materials are explored for future use in multiplexed sensing and imaging applications.     

Efficient Isolation and Solubilization of Pristine Single‐Walled Nanotubes in Bile Salt Micelles

We have investigated a wide variety of surfactants for their efficiency in dissolving isolated single‐walled carbon nanotubes (SWNTs) in water. In doing so, we have completely avoided the harsh chemical or mechanical conditions, such as acid or ultrasonic treatments, that are known to damage SWNTs. Bile salts in particular are found to be exceptionally effective in dissolving individual tubes, as evidenced by highly resolved optical absorption spectra, bright bandgap fluorescence, and the unprecedented resolution (～ 2.5 cm^–1) of the radial breathing modes in Raman spectra. This is attributed to the formation of very regular and stable micelles around the nanotubes providing an unusually homogeneous environment. Quantitative information concerning the degree of solubilization is obtained from absorption spectroscopy.