Surface Instability and Chemical Reactivity of ZrSiS and ZrSiSe Nodal‐Line Semimetals

Materials exhibiting nodal‐line fermions promise superb impact on technology for the prospect of dissipationless spintronic devices. Among nodal‐line semimetals, the ZrSiX (X = S, Se, Te) class is the most suitable candidate for such applications. However, the surface chemical reactivity of ZrSiS and ZrSiSe has not been explored yet. Here, by combining different surface‐science tools and density functional theory, it is demonstrated that the formation of ZrSiS and ZrSiSe surfaces by cleavage is accompanied by the washing up of the exotic topological bands, giving rise to the nodal line. Moreover, while the ZrSiS has a termination layer with both Zr and S atoms, in the ZrSiSe surface, reconstruction occurs with the appearance of Si surface atoms, which is particularly prone to oxidation. It is demonstrated that the chemical activity of ZrSiX compounds is mostly determined by the interaction of the Si layer with the ZrX sublayer. A suitable encapsulation for ZrSiX should not only preserve their surfaces from interaction with oxidative species, but also provide a saturation of dangling bonds with minimal distortion of the surface.     

Tailoring the Surface Chemical Reactivity of Transition‐Metal Dichalcogenide PtTe2 Crystals

PtTe₂ is a novel transition‐metal dichalcogenide hosting type‐II Dirac fermions that displays application capabilities in optoelectronics and hydrogen evolution reaction. Here it is shown, by combining surface science experiments and density functional theory, that the pristine surface of PtTe₂ is chemically inert toward the most common ambient gases (oxygen and water) and even in air. It is demonstrated that the creation of Te vacancies leads to the appearance of tellurium‐oxide phases upon exposing defected PtTe₂ surfaces to oxygen or ambient atmosphere, which is detrimental for the ambient stability of uncapped PtTe₂‐based devices. On the contrary, in PtTe₂ surfaces modified by the joint presence of Te vacancies and substitutional carbon atoms, the stable adsorption of hydroxyl groups is observed, an essential step for water splitting and the water–gas shift reaction. These results thus pave the way toward the exploitation of this class of Dirac materials in catalysis.     

Photochemical Generation of Light Responsive Surfaces

The preparation of patterned photoswitchable surfaces by employing the nitrile imine‐mediated tetrazole ene cycloaddition (NITEC) photoinduced reaction in the presence of dipolarophiles based on photoresponsive azobenzene moieties is reported. The dipolarophile used is a maleimide carrying either an azobenzene unit or a first generation dendron containing two azobenzene units. X‐ray photoelectron spectroscopy (XPS) is employed to analyze the functionalized silicon wafers, while time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) evidences the spatial control of the functionalization of the surface achieved by using a micropatterned shadow mask. Water contact angle measurements and optical inspection observing the behavior of a water droplet demonstrate the photoinduced change on wettability of the structured functionalized surfaces due to the reversible trans‐to‐cis isomerization of the azobenzene moities.     

Electrochemically Triggered Metal–Insulator Transition between VO2 and V2O5

Distinct properties of multiple phases of vanadium oxide (VO_x) render this material family attractive for advanced electronic devices, catalysis, and energy storage. In this work, phase boundaries of VO_x are crossed and distinct electronic properties are obtained by electrochemically tuning the oxygen content of VO_x thin films under a wide range of temperatures. Reversible phase transitions between two adjacent VO_x phases, VO₂ and V₂O₅, are obtained. Cathodic biases trigger the phase transition from V₂O₅ to VO₂, accompanied by disappearance of the wide band gap. The transformed phase is stable upon removal of the bias while reversible upon reversal of the electrochemical bias. The kinetics of the phase transition is monitored by tracking the time‐dependent response of the X‐ray absorption peaks upon the application of a sinusoidal electrical bias. The electrochemically controllable phase transition between VO₂ and V₂O₅ demonstrates the ability to induce major changes in the electronic properties of VO_x by spanning multiple structural phases. This concept is transferable to other multiphase oxides for electronic, magnetic, or electrochemical applications.     

Surface Reconstruction,Oxidation Mechanism,and Stability of Cd3As2

Cadmium arsenide (Cd₃As₂) has recently attracted considerable interest for the presence of 3D massless Dirac fermions with ultrahigh mobility and magnetoresistance. However, its surface properties are currently largely unexplored both theoretically and experimentally, due to the very large unit cell and the challenging growth of single‐crystal samples, respectively. Here, by combining ab initio calculations with surface‐science spectroscopic experiments, the presence of a surface reconstruction is unveiled in centimeter‐scale (112)‐oriented Cd₃As₂ single‐crystal foils produced by the self‐selecting vapor growth. Outermost Cd atoms descend into the As‐sublayer with a subsequent self‐passivation of the dangling bonds with As atoms, forming the triangle lattice previously imaged by scanning tunneling microscopy. Moreover, the oxidation mechanism of this reconstructed surface, dominated by the formation of As? O? Cd bonds, is revealed. Interestingly, it is found that the band structure of the reconstructed surface of Cd₃As₂ is quite robust against surface oxidation. Both computational and experimental findings point to a successful exploitation in technology of Cd₃As₂ single crystals.     

Evidence for Chemicals Intermingling at Silicon/Titanium Oxide (TiOx) Interface and Existence of Multiple Bonding States in Monolithic TiOx

Metal oxides (MOs) are used in photovoltaics and microelectronics as surface passivating layers and gate dielectrics, respectively. The effectiveness of MOs predominantly depends on their structure and the nature of the semiconductor/MO (S/MO) interface. While some efforts are made to analyze interface behavior of a few MOs, greater fundamental understanding on the interface and structural behaviors of emerging MOs is yet to be established for enhanced scientific and technological developments. Here, the structure of atomic layer deposited titanium oxide (TiO_x) and the nature of the c‐Si/TiO_x interface on the atomic‐ to nanoscale are probed. A new breed of mixed oxide (SiO_x+TiO_x) interfacial layer with a thickness of ≈1.3 nm at the c‐Si/TiO_x interface is discovered, and its thickness further increases to ≈1.5 nm after postdeposition annealing. It is observed that both as‐deposited and annealed monolithic TiO_x films comprise multiple bonding states at varying film thickness, with an oxygen‐deficient TiO_x layer located close to the mixed oxide/TiO_x interface. The stoichiometry of this layer improves when reaching the middle and near surface regions of the TiO_x layer, respectively. This work uncovers several critical structural and interface aspects of TiO_x, and thus creates opportunities to control and design improved photovoltaic and electronic devices for future development.     

Porous Polymer Coatings: a Versatile Approach to Superhydrophobic Surfaces

Here, a facile and inexpensive approach to superhydrophobic polymer coatings is presented. The method involves the in situ polymerization of common monomers in the presence of a porogenic solvent to afford superhydrophobic surfaces with the desired combination of micro‐ and nanoscale roughness. The method is applicable to a variety of substrates and is not limited to small areas or flat surfaces. The polymerized material can be ground into a superhydrophobic powder, which, once applied to a surface, renders it superhydrophobic. The morphology of the porous polymer structure can be efficiently controlled by composition of the polymerization mixture, while surface chemistry can be adjusted by photografting. Morphology control is used to reduce the globule size of the porous architecture from micro down to nanoscale thereby affording a transparent material. The influence of both surface chemistry as well as the length scale of surface roughness on the superhydrophobicity is discussed.     

CO2‐Laser‐Induced Growth of Epitaxial Graphene on 6H‐SiC(0001)

The thermal decomposition of SiC surface provides, perhaps, the most promising method for the epitaxial growth of graphene on a material useful in the electronics platform. Currently, efforts are focused on a reliable method for the growth of large‐area, low‐strain epitaxial graphene that is still lacking. Here, a novel method for the fast, single‐step epitaxial growth of large‐area homogeneous graphene film on the surface of SiC(0001) using an infrared CO₂ laser (10.6 μm) as the heating source is reported. Apart from enabling extreme heating and cooling rates, which can control the stacking order of epitaxial graphene, this method is cost‐effective in that it does not necessitate SiC pre‐treatment and/or high vacuum, it operates at low temperature and proceeds in the second time scale, thus providing a green solution to EG fabrication and a means to engineering graphene patterns on SiC by focused laser beams. Uniform, low–strain graphene film is demonstrated by scanning electron microscopy, X‐ray photoelectron spectroscopy, secondary ion‐mass spectroscopy, and Raman spectroscopy. Scalability to industrial level of the method described here appears to be realistic, in view of the high rate of CO₂‐laser‐induced graphene growth and the lack of strict sample–environment conditions.     

Efficient Field Emission from Vertically Aligned Cu2O1‐δ(111) Nanostructure Influenced by Oxygen Vacancy

In the architecture described, cuprous oxide (Cu₂O) is tamed to be highly (111) plane oriented nanostructure through adjusting the deposition postulate by glancing angle deposition technique. In the controlled atmosphere oxygen vacancy is introduced into the Cu₂O crystal subsequently fostering an impurity energy state (E_im) close to the conduction band. Our model of Cu₂O electronic structure using density functional theory suggests that oxygen vacancies enhance the electron donating ability because of unshared d‐electrons of Cu atoms (nearest to the vacancy site), allowing to pin the work function energy level around 0.28 eV compared to the bulk. This result is also complemented by Kelvin probe force microscopy analysis and X‐ray photoelectron spectroscopy method. Oxygen vacancy in Cu₂O (Cu₂O_1‐δ) exhibits promising field emission properties with interesting field electron tunneling behavior at different applied fields. The films show very low turn‐on and threshold voltages of value 0.8 and 2.4 V μm^?1 respectively which is influenced by the oxygen vacancy. Here, a correlation between the work function modulation due to the oxygen vacancy and enhancement of field emission of Cu₂O_1–δ nanostructure is demonstrated. This work reveals a promising new vision for Cu₂O as a low power field emitter device.     

Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.     

Stabilized Blue Emission from Polyfluorene‐Based Light‐Emitting Diodes: Elimination of Fluorenone Defects

Polyfluorene (PF)‐based light‐emitting diodes (LEDs) typically exhibit device degradation under operation with the emergence of a strong low‐energy emission band (at ～ 2.2–2.4 eV). This longer wavelength band converts the desired blue emission to blue–green or even yellow. We have studied both the photoluminescence (PL) and electroluminescence (EL) of PFs with different molecular structures and found that the low‐energy emission band originates from fluorenone defects which are introduced by photo‐oxidization, thermal oxidation, or during device fabrication. X‐ray photo‐emission spectroscopy (XPS) results show that the oxidation of PF is strongly catalyzed by the presence of calcium. The fluorenone defects generate a stronger contribution to the EL than to the PL. By utilization of a novel electron‐transporting material as a buffer layer between the emissive PF and the Ca/Ag (Ba/Ag) cathode, the blue EL emission from the PF was stabilized.     

A Versatile Buffer Layer for Polymer Solar Cells: Rendering Surface Potential by Regulating Dipole

Spin‐coated film of poly(vinylidenefluoride‐hexafluoropropylene) (P(VDF‐HFP)) acts as a cathode/anode buffer layer in polymer solar cells (PSCs) with conventional/inverted device structures. Such devices show optimized performances comparable with the controlled device, making P(VDF‐HFP) a good substitute for LiF/MoO₃ as a cathode/anode buffer layer. Ultraviolet photoelectron spectroscopy (UPS) and Kelvin force microscope (KFM) measurements show that increased surface potential of active layers improves cathode contact. In piezoresponse force microscopy (PFM) measurement, P(VDF‐HFP) responds to applied bias in phase curve, showing tunable dipole. This tunable dipole renders surface potential under applied bias. As a result, open‐circuit voltage of devices alters instantly with poling voltage. Moreover, positive poling of P(VDF‐HFP) together with simultaneous oxidation of Ag gradually improves performance of inverted structure device. Integer charge transfer (ICT) model elucidates improved electrode contacts by dipole tuning, varying surface potential and vacuum level shift. Understanding the function of dipole makes P(VDF‐HFP) a promising and versatile buffer layer for PSCs.     

Reversible Amorphous‐to‐Amorphous Transitions in Chalcogenide Films: Correlating Changes in Structure and Optical Properties

Structural transitions in materials are accompanied by appreciable and exploitable changes in physical‐chemical properties. Whereas reversible optically‐driven atomistic changes in crystal‐to‐amorphous transitions are generally known and exploited in applications, the nature of the corresponding polyamorphic transitions between two structurally distinct meta‐stable amorphous phases is an unexplored theme. Direct experimental evidence is reported for the nature of the atomistic changes during fully reversible amorphous‐to‐amorphous switching between two individual states in the non‐crystalline As₅₀Se₅₀ films prepared by pulsed‐laser deposition and consequent changes in optical properties. Combination of surface sensitive X‐ray photoelectron spectroscopy and spectroscopic ellipsometry show that the near‐bandgap energy illumination and annealing induce reversible switching in the material's structure by local bonding rearrangements. This is accompanied by switching in refractive index between two well‐defined states. Exploiting the pluralism of distinct structural states in a disordered solid can provide new insights into the data storage in emerging optical memory and photonic applications.     

A Non‐Covalent Approach for Depositing Spatially Selective Materials on Surfaces

We describe a new method for depositing patterned materials, based on non‐covalent trapping of ligands in solvent‐templated nanocavities created in aromatic, self‐assembled monolayer or polymer films. A model has been developed and tested to describe nanocavity formation and the ligand adsorption process, which occurs via ligand exclusion from ambient, aqueous solution into the hydrophobic nanocavities. Ligand adsorption rates and ligand adsorbate reactivity with solution species are governed by ligand size/geometry design factors identified using the model. Spatial control of adsorption is achieved via film photochemical changes that inhibit subsequent ligand adsorption/accessibility (UV or X‐ray) or displacement of entrapped ligands (50 keV electron‐beam) during film patterning. The reactivity of the adsorbed ligand is illustrated by the selective binding of Pd^II species that catalyze electroless metal deposition. Fabrication of high‐resolution (≈ 50 nm), positive‐tone patterns in nickel with acceptable feature‐edge acuity and critical dimension control (≈ 5 %) is demonstrated.     

Copper (I) Oxide (Cu2O) based back contact for p‐i‐n CdTe solar cells

In this paper a promising solution for the notorious problem of manufacturing a stable low ohmic back contact of a CdTe thin film superstrate solar cell is presented without using elemental copper. Instead we have used a Cu₂O layer inserted between the CdTe absorber and metal contact (Au). In contrast to the barrier free band alignment gained by using the transitivity rules, XPS measurements show a barrier in the valence band of the Cu₂O layers directly after deposition, which results in a low performing JV curve. The contact can be improved by a short thermal treatment resulting in efficiencies superior to copper based contacts for standard CdS/CdTe hetero junction solar cells prepared on commercial glass/FTO substrates. By replacing the CdS window layer with a CdS:O buffer layer efficiencies of >15% could be achieved. Copyright © 2016 John Wiley & Sons, Ltd.     

(Pb1–xCdx)S Nanoparticles Embedded in a Conjugated Organic Matrix,as Studied by Photoluminescence and Light‐Induced X‐ray Photoelectron Spectroscopy

Elliptically shaped (Pb_1–xCd_x)S nanoparticles (NPs) of average size 2.3 × 2.9 nm (minor axis × major axis) have been prepared via reaction of a solid [oligo(p‐phenylene‐ethynylene) dicarboxylate]Pb_0.9Cd_0.1 salt matrix, with gaseous H₂S. A significantly long emission lifetime, with multi‐exponential behavior, is detected in time‐resolved photoluminescence measurements, substantially different from the decay patterns of pure PbS and CdS NPs within the same organic matrix. Evidence for the co‐existence of Cd and Pb within the same particle is provided by light‐induced X‐ray photoelectron spectroscopy.     

X‐Ray Spectroscopic Investigation of Chlorinated Graphene: Surface Structure and Electronic Effects

Chemical doping of graphene represents a powerful means of tailoring its electronic properties. Synchrotron‐based X‐ray spectroscopy offers an effective route to investigate the surface electronic and chemical states of functionalizing dopants. In this work, a suite of X‐ray techniques is used, including near edge X‐ray absorption fine structure spectroscopy, X‐ray photoemission spectroscopy, and photoemission threshold measurements, to systematically study plasma‐based chlorinated graphene on different substrates, with special focus on its dopant concentration, surface binding energy, bonding configuration, and work function shift. Detailed spectroscopic evidence of C–Cl bond formation at the surface of single layer graphene and correlation of the magnitude of p‐type doping with the surface coverage of adsorbed chlorine is demonstrated for the first time. It is shown that the chlorination process is a highly nonintrusive doping technology, which can effectively produce strongly p‐doped graphene with the 2D nature and long‐range periodicity of the electronic structure of graphene intact. The measurements also reveal that the interaction between graphene and chlorine atoms shows strong substrate effects in terms of both surface coverage and work function shift.     

Graphite Oxide and Aromatic Amines: Size Matters

Experimental and theoretical studies are performed in order to illuminate, for first time, the intercalation mechanism of polycyclic aromatic molecules into graphite oxide. Two representative molecules of this family, aniline and naphthalene amine are investigated. After intercalation, aniline molecules prefer to covalently connect to the graphene oxide matrix via chemical grafting, while napthalene amine molecules bind with the graphene oxide surface through π–π interactions. The presence of intercalated aromatic molecules between the graphene oxide layers is demonstrated by X‐ray diffraction, while the type of interaction between graphene oxide and polycyclic organic molecules is elucidated by X‐ray photoelectron spectroscopy. Combined quantum mechanical and molecular mechanical calculations describe the intercalation mechanism and the aniline grafting, rationalizing the experimental data. The present work opens new perspectives for the interaction of various aromatic molecules with graphite oxide and the so‐called “intercalation chemistry”.     

Dichotomy in the Lithiation Pathway of Ellipsoidal and Platelet LiFePO4 Particles Revealed through Nanoscale Operando State‐of‐Charge Imaging

LiFePO₄ is a promising phase‐separating battery electrode and a model system for studying lithiation. The role of particle synthesis and the corresponding particle morphology on the nanoscale insertion and migration of Li is not well understood, and elucidating the intercalation pathway is crucial toward improving battery performance. A synchrotron operando liquid X‐ray imaging platform is developed to track the migration of Li in LiFePO₄ electrodes with single‐particle sensitivity. Lithiation is tracked in two particle types—ellipsoidal and platelet—while the particles cycle in an organic liquid electrolyte, and the results show a clear dichotomy in the intercalation pathway. The ellipsoidal particles intercalate sequentially, concentrating the current in a small number of actively intercalating particles. At the same cycling rate, platelet particles intercalate simultaneously, leading to a significantly more uniform current distribution. Assuming that the particles intercalate through a single‐phase pathway, it is proposed that the two particle types exhibit different surface properties, a result of different synthesis procedures, which affect the surface reactivity of LiFePO₄. Alternatively, if the particles intercalate through nucleation and growth, the larger size of platelet particles may account for the dichotomy. Beyond providing particle engineering insights, the operando microscopy platform enables new opportunities for nanoscale chemical imaging of liquid‐based electrochemical systems.