共查询到20条相似文献,搜索用时 31 毫秒
1.
Y. Zhang S. Wang M. Eghtedari M. Motamedi N.A. Kotov 《Advanced functional materials》2005,15(5):725-731
Successful engineering of functional tissues requires the development of three‐dimensional (3D) scaffolds that can provide an optimum microenvironment for tissue growth and regeneration. A new class of 3D scaffolds with a high degree of organization and unique topography is fabricated from polyacrylamide hydrogel. The hydrogel matrix is molded by inverted colloidal crystals made from 104 μm poly(methyl methacrylate) spheres. The topography of the scaffold can be described as hexagonally packed 97 μm spherical cavities interconnected by a network of channels. The scale of the long‐range ordering of the cavities exceeds several millimeters. In contrast to analogous material in the bulk, hydrogel shaped as an inverted opal exhibits much higher swelling ratios; its swelling kinetics is an order of magnitude faster as well. The engineered scaffold possesses desirable mechanical and optical properties that can facilitate tissue regeneration while allowing for continuous high‐resolution optical monitoring of cell proliferation and cell–cell interaction within the scaffold. The scaffold biocompatibility as well as cellular growth and infiltration within the scaffold were observed for two distinct human cell lines which were seeded on the scaffold and were tracked microscopically up to a depth of 250 μm within the scaffold for a duration of up to five weeks. Ease of production, a unique 3D structure, biocompatibility, and optical transparency make this new type of hydrogel scaffold suitable for most challenging tasks in tissue engineering. 相似文献
2.
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Fei Gao Ziyang Xu Qingfei Liang Bo Liu Haofei Li Yuanhao Wu Yinyu Zhang Zifeng Lin Mingming Wu Changshun Ruan Wenguang Liu 《Advanced functional materials》2018,28(13)
The emerging 3D printing technique allows for tailoring hydrogel‐based soft structure tissue scaffolds for individualized therapy of osteochondral defects. However, the weak mechanical strength and uncontrollable swelling intrinsic to conventional hydrogels restrain their use as bioinks. Here, a high‐strength thermoresponsive supramolecular copolymer hydrogel is synthesized by one‐step copolymerization of dual hydrogen bonding monomers, N‐acryloyl glycinamide, and N‐[tris(hydroxymethyl)methyl] acrylamide. The obtained copolymer hydrogels demonstrate excellent mechanical properties—robust tensile strength (up to 0.41 MPa), large stretchability (up to 860%), and high compressive strength (up to 8.4 MPa). The rapid thermoreversible gel ? sol transition behavior makes this copolymer hydrogel suitable for direct 3D printing. Successful preparation of 3D‐printed biohybrid gradient hydrogel scaffolds is demonstrated with controllable 3D architecture, owing to shear thinning property which allows continuous extrusion through a needle and also immediate gelation of fluid upon deposition on the cooled substrate. Furthermore, this biohybrid gradient hydrogel scaffold printed with transforming growth factor beta 1 and β‐tricalciumphosphate on distinct layers facilitates the attachment, spreading, and chondrogenic and osteogenic differentiation of human bone marrow stem cells (hBMSCs) in vitro. The in vivo experiments reveal that the 3D‐printed biohybrid gradient hydrogel scaffolds significantly accelerate simultaneous regeneration of cartilage and subchondral bone in a rat model. 相似文献
3.
Supertough Hybrid Hydrogels Consisting of a Polymer Double‐Network and Mesoporous Silica Microrods for Mechanically Stimulated On‐Demand Drug Delivery
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Suji Choi Young jin Choi Moon‐Sun Jang Jung Hee Lee Ji Hoon Jeong Jaeyun Kim 《Advanced functional materials》2017,27(42)
Despite their potential in various fields of bioapplications, such as drug/cell delivery, tissue engineering, and regenerative medicine, hydrogels have often suffered from their weak mechanical properties, which are attributed to their single network of polymers. Here, supertough composite hydrogels are proposed consisting of alginate/polyacrylamide double‐network hydrogels embedded with mesoporous silica particles (SBA‐15). The supertoughness is derived from efficient energy dissipation through the multiple bondings, such as ionic crosslinking of alginate, covalent crosslinking of polyacrylamide, and van der Waals interactions and hydrogen bondings between SBA‐15 and the polymers. The superior mechanical properties of these hybrid hydrogels make it possible to maintain the hydrogel structure for a long period of time in a physiological solution. Based on their high mechanical stability, these hybrid hydrogels are demonstrated to exhibit on‐demand drug release, which is controlled by an external mechanical stimulation (both in vitro and in vivo). Moreover, different types of drugs can be separately loaded into the hydrogel network and mesopores of SBA‐15 and can be released with different speeds, suggesting that these hydrogels can also be used for multiple drug release. 相似文献
4.
Biomimetic scaffolds mimic important features of the extracellular matrix (ECM) architecture and can be finely controlled at the nano‐ or microscale for tissue engineering. Rational design of biomimetic scaffolds is based on consideration of the ECM as a natural scaffold; the ECM provides cells with a variety of physical, chemical, and biological cues that affect cell growth and function. There are a number of approaches available to create 3D biomimetic scaffolds with control over their physical and mechanical properties, cell adhesion, and the temporal and spatial release of growth factors. Here, an overview of some biological features of the natural ECM is presented and a variety of original engineering methods that are currently used to produce synthetic polymer‐based scaffolds in pre‐fabricated form before implantation, to modify their surfaces with biochemical ligands, to incorporate growth factors, and to control their nano‐ and microscale geometry to create biomimetic scaffolds are discussed. Finally, in contrast to pre‐fabricated scaffolds composed of synthetic polymers, injectable biomimetic scaffolds based on either genetically engineered‐ or chemically synthesized‐peptides of which sequences are derived from the natural ECM are discussed. The presence of defined peptide sequences can trigger in situ hydrogelation via molecular self‐assembly and chemical crosslinking. A basic understanding of the entire spectrum of biomimetic scaffolds provides insight into how they can potentially be used in diverse tissue engineering, regenerative medicine, and drug delivery applications. 相似文献
5.
Nafiseh Masoumi Dane Copper Peter Chen Alexander Cubberley Kai Guo Ruei‐Zeng Lin Bayoumi Ahmed David Martin Elena Aikawa Juan Melero‐Martin John Mayer 《Advanced functional materials》2017,27(27)
Biomimetic materials with biomechanical properties resembling those of native tissues while providing an environment for cell growth and tissue formation, are vital for tissue engineering (TE). Mechanical anisotropy is an important property of native cardiovascular tissues and directly influences tissue function. This study reports fabrication of anisotropic cell‐seeded constructs while retaining control over the construct's architecture and distribution of cells. Newly synthesized poly‐4‐hydroxybutyrate (P4HB) is fabricated with a dry spinning technique to create anelastomeric fibrous scaffold that allows control of fiber diameter, porosity, and rate ofdegradation. To allow cell and tissue ingrowth, hybrid scaffolds with mesenchymalstem cells (MSCs) encapsulated in a photocrosslinkable hydrogel were developed. Culturing the cellularized scaffolds in a cyclic stretch/flexure bioreactor resulted in tissue formation and confirmed the scaffold's performance under mechanical stimulation. In vivo experiments showed that the hybrid scaffold is capable of withstanding physiological pressures when implanted as a patch in the pulmonary artery. Aligned tissue formation occurred on the scaffold luminal surface without macroscopic thrombus formation. This combination of a novel, anisotropic fibrous scaffold and a tunable native‐like hydrogel for cellular encapsulation promoted formation of 3D tissue and provides a biologically functional composite scaffold for soft‐tissue engineering applications. 相似文献
6.
Rationally Designed Dynamic Protein Hydrogels with Reversibly Tunable Mechanical Properties
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Protein hydrogels have attracted considerable interest due to their potential applications in biomedical engineering. Creating protein hydrogels with dynamic mechanical properties is challenging. Here, the engineering of a novel, rationally designed protein‐hydrogel is reported that translates molecular level protein folding‐unfolding conformational changes into macroscopic reversibly tunable mechanical properties based on a redox controlled protein folding‐unfolding switch. This novel protein folding switch is constructed from a designed mutually exclusive protein. Via oxidation and reduction of an engineered disulfide bond, the protein folding switch can switch its conformation between folded and unfolded states, leading to a drastic change of protein's effective chain length and mechanical compliance. This redox‐responsive protein can be readily photochemically crosslinked into solid hydrogels, in which molecular level conformational changes (folding‐unfolding) can result in significant macroscopic changes in hydrogel's physical and mechanical properties due to the change of the effective chain length between two crosslinking points in the protein hydrogel network. It is found that when reduced, the hydrogel swells and is mechanically compliant; when oxidized, it swells to a less extent and becomes resilient and stiffer, exhibiting an up to fivefold increase in its Young's modulus. The changes of the mechanical and physical properties of this hydrogel are fully reversible and can be cycled using redox potential. This novel protein hydrogel with dynamic mechanical and physical properties could find numerous applications in material sciences and tissue engineering. 相似文献
7.
Shreya Mehrotra Bruna A. G. de Melo Minoru Hirano Wendy Keung Ronald A. Li Biman B. Mandal Su Ryon Shin 《Advanced functional materials》2020,30(12)
Bioprinting holds great promise toward engineering functional cardiac tissue constructs for regenerative medicine and as drug test models. However, it is highly limited by the choice of inks that require maintaining a balance between the structure and functional properties associated with the cardiac tissue. In this regard, a novel and mechanically robust biomaterial‐ink based on nonmulberry silk fibroin protein is developed. The silk‐based ink demonstrates suitable mechanical properties required in terms of elasticity and stiffness (≈40 kPa) for developing clinically relevant cardiac tissue constructs. The ink allows the fabrication of stable anisotropic scaffolds using a dual crosslinking method, which are able to support formation of aligned sarcomeres, high expression of gap junction proteins as connexin‐43, and maintain synchronously beating of cardiomyocytes. The printed constructs are found to be nonimmunogenic in vitro and in vivo. Furthermore, delving into an innovative method for fabricating a vascularized myocardial tissue‐on‐a‐chip, the silk‐based ink is used as supporting hydrogel for encapsulating human induced pluripotent stem cell derived cardiac spheroids (hiPSC‐CSs) and creating perfusable vascularized channels via an embedded bioprinting technique. The ability is confirmed of silk‐based supporting hydrogel toward maturation and viability of hiPSC‐CSs and endothelial cells, and for applications in evaluating drug toxicity. 相似文献
8.
Mohsen Akbari Ali Tamayol Veronique Laforte Nasim Annabi Alireza Hassani Najafabadi Ali Khademhosseini David Juncker 《Advanced functional materials》2014,24(26):4060-4067
The fabrication of cell‐laden structures with anisotropic mechanical properties while having a precise control over the distribution of different cell types within the constructs is important for many tissue engineering applications. Automated textile technologies for making fabrics allow simultaneous control over the color pattern and directional mechanical properties. The use of textile techniques in tissue engineering, however, demands the presence of cell‐laden fibers that can withstand the mechanical stresses during the assembly process. Here, the concept of composite living fibers (CLFs) in which a core of load bearing synthetic polymer is coated by a hydrogel layer containing cells or microparticles is introduced. The core thread is drawn sequentially through reservoirs containing a cell‐laden prepolymer and a crosslinking reagent. The thickness of the hydrogel layer increases linearly with to the drawing speed and the prepolymer viscosity. CLFs are fabricated and assembled using regular textile processes including weaving, knitting, braiding, winding, and embroidering, to form cell‐laden structures. Cellular viability and metabolic activity are preserved during CLF fabrication and assembly, demonstrating the feasibility of using these processes for engineering functional 3D tissue constructs. 相似文献
9.
Hydrogels are commonly used as engineered extracellular matrix (ECM) mimics in applications ranging from tissue engineering to in vitro disease models. Ideal mechanisms used to crosslink ECM‐mimicking hydrogels do not interfere with the biology of the system. However, most common hydrogel crosslinking chemistries exhibit some form of crossreactivity. The field of bioorthogonal chemistry has arisen to address the need for highly specific and robust reactions in biological contexts. Accordingly, bioorthogonal crosslinking strategies are incorporated into hydrogel design, allowing for gentle and efficient encapsulation of cells in various hydrogel materials. Furthermore, the selective nature of bioorthogonal chemistries can permit dynamic modification of hydrogel materials in the presence of live cells and other biomolecules to alter matrix mechanical properties and biochemistry on demand. This review provides an overview of bioorthogonal strategies used to prepare cell‐encapsulating hydrogels and highlights the potential applications of bioorthogonal chemistries in the design of dynamic engineered ECMs. 相似文献
10.
Chao Xu Yin Xu Ming Yang Yukai Chang Anmin Nie Zhongyuan Liu Jianglin Wang Zhiqiang Luo 《Advanced functional materials》2020,30(39)
Conductive hydrogel scaffolds have important applications for electroactive tissue repairs. However, the development of conductive hydrogel scaffolds tends to incorporate nonbiodegradable conductive nanomaterials that will remain in the human body as foreign matters. Herein, a biodegradable conductive hybrid hydrogel is demonstrated based on the integration of black phosphorus (BP) nanosheets into the hydrogel matrix. To address the challenge of applying BP nanosheets in tissue engineering due to its intrinsic instability, a polydopamine (PDA) modification method is developed to improve the stability. Moreover, PDA modification also enhances interfacial bonding between pristine BP nanosheets and the hydrogel matrix. The incorporation of polydopamine‐modified black phosphorous (BP@PDA) nanosheets into the gelatin methacryloyl (GelMA) hydrogels significantly enhances the electrical conductivity of the hydrogels and improves the cell migration of mesenchymal stem cells (MSCs) within the 3D scaffolds. On the basis of the gene expression and protein level assessments, the BP@PDA‐incorporated GelMA scaffold can significantly promote the differentiation of MSCs into neural‐like cells under the synergistic electrical stimulation. This strategy of integrating biodegradable conductive BP nanomaterials within a biocompatible hydrogel provides a new insight into the design of biomaterials for broad applications in tissue engineering of electroactive tissues, such as neural, cardiac, and skeletal muscle tissues. 相似文献
11.
Sourabh Ghosh Sara T. Parker Xianyan Wang David L. Kaplan Jennifer A. Lewis 《Advanced functional materials》2008,18(13):1883-1889
Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility. 相似文献
12.
Yung‐Hao Tsou Xue‐Qing Zhang Xin Bai He Zhu Zhongyu Li Yanlan Liu Jinjun Shi Xiaoyang Xu 《Advanced functional materials》2018,28(34)
Photoluminescent hydrogels that function as both injectable scaffolds and fluorescent imaging probes hold great potential for therapeutics delivery and tissue engineering. Current fluorescent hydrogels are fabricated by either conjugating or doping a fluorescent dye, fluorescent protein, lanthanide chelate, or quantum dot into polymeric hydrogel matrix. Their biomedical applications are severely limited due to drawbacks such as photostability, carcinogenesis, and toxicity associated with the above‐mentioned dopants. Here, a successful development of dopant‐free photoluminescent hydrogels in situ formed by crosslinking of biocompatible polymer precursors is reported, which can be synthesized by incorporating an amino acid to a citric acid based polyester oligomer followed by functionalization of multivalent crosslinking group through a convenient transesterification reaction using Candida Antarctica Lipase B as a catalyst. It is demonstrated that the newly developed hydrogels possess tunable degradation, intrinsic photoluminescence, mechanical properties, and exhibit sustained release of various molecular weight dextrans. In vivo study shows that the hydrogels formed in situ following subcutaneous injection exhibit excellent biocompatibility and emit strong fluorescence under visible light excitation without the need of using any traditional organic dyes. Their in vivo degradation profiles are then depicted by noninvasively monitoring fluorescence intensity of the injected hydrogel implants. 相似文献
13.
A Highly Elastic and Rapidly Crosslinkable Elastin‐Like Polypeptide‐Based Hydrogel for Biomedical Applications
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Yi‐Nan Zhang Reginald K. Avery Queralt Vallmajo‐Martin Alexander Assmann Andrea Vegh Adnan Memic Bradley D. Olsen Nasim Annabi Ali Khademhosseini 《Advanced functional materials》2015,25(30):4814-4826
Elastin‐like polypeptides (ELPs) are promising for biomedical applications due to their unique thermoresponsive and elastic properties. ELP‐based hydrogels have been produced through chemical and enzymatic crosslinking or photocrosslinking of modified ELPs. Herein, a photocrosslinked ELP gel using only canonical amino acids is presented. The inclusion of thiols from a pair of cysteine residues in the ELP sequence allows disulfide bond formation upon exposure to UV light, leading to the formation of a highly elastic hydrogel. The physical properties of the resulting hydrogel such as mechanical properties and swelling behavior can be easily tuned by controlling ELP concentrations. The biocompatibility of the engineered ELP hydrogels is shown in vitro as well as corroborated in vivo with subcutaneous implantation of hydrogels in rats. ELP constructs demonstrate long‐term structural stability in vivo, and early and progressive host integration with no immune response, suggesting their potential for supporting wound repair. Ultimately, functionalized ELPs demonstrate the ability to function as an in vivo hemostatic material over bleeding wounds. 相似文献
14.
Ascidian‐Inspired Fast‐Forming Hydrogel System for Versatile Biomedical Applications: Pyrogallol Chemistry for Dual Modes of Crosslinking Mechanism
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Jung Ho Cho Jung Seung Lee Jisoo Shin Eun Je Jeon Soohwan An Yi Sun Choi Seung‐Woo Cho 《Advanced functional materials》2018,28(6)
Exploitation of unique biochemical and biophysical properties of marine organisms has led to the development of functional biomaterials for various biomedical applications. Recently, ascidians have received great attention, owing to their extraordinary properties such as strong underwater adhesion and rapid self‐regeneration. Specific polypeptides containing 3,4,5‐trihydroxyphenylalanine (TOPA) in the blood cells of ascidians are associated with such intrinsic properties generated through complex oxidative processes. In this study, a bioinspired hydrogel platform is developed, demonstrating versatile applicability for tissue engineering and drug delivery, by conjugating pyrogallol (PG) moiety resembling ascidian TOPA to hyaluronic acid (HA). The HA–PG conjugate can be rapidly crosslinked by dual modes of oxidative mechanisms using an oxidant or pH control, resulting in hydrogels with different mechanical and physical characteristics. The versatile utility of HA–PG hydrogels formed via different crosslinking mechanisms is tested for different biomedical platforms, including microparticles for sustained drug delivery and tissue adhesive for noninvasive cell transplantation. With extraordinarily fast and different routes of PG oxidation, ascidian‐inspired HA–PG hydrogel system may provide a promising biomaterial platform for a wide range of biomedical applications. 相似文献
15.
Yanbo Zhang Xiaochen Liu Liangdan Zeng Jin Zhang Jianlin Zuo Jun Zou Jianxun Ding Xuesi Chen 《Advanced functional materials》2019,29(36)
Successful regeneration of weight‐bearing bone defects and critical‐sized cartilage defects remains a major challenge in clinical orthopedics. In the past decades, biodegradable polymer materials with biomimetic chemical and physical properties have been rapidly developed as ideal candidates for bone and cartilage tissue engineering scaffolds. Due to their unique advantages over other materials of high specific‐surface areas, suitable mechanical strength, and tailorable characteristics, scaffolds made of polymer fibers have been increasingly used for the repair of bone and cartilage defects. This Review summarizes the preparation and compositions of polymer fibers, as well as their characteristics. More importantly, the applications of polymer fiber scaffolds with well‐designed structures or unique properties in bone, cartilage, and osteochondral tissue engineering have been comprehensively highlighted. On the whole, such a comprehensive summary affords constructive suggestions for the development of polymer fiber scaffolds in bone and cartilage tissue engineering. 相似文献
16.
Micropatterning technology is a powerful tool for controlling the cellular microenvironment and investigating the effects of physical parameters on cell behaviors, such as migration, proliferation, apoptosis, and differentiation. Although there have been significant developments in regulating the spatial and temporal distribution of physical properties in various materials, little is known about the role of the size of micropatterned regions of hydrogels with different crosslinking densities on the response of encapsulated cells. In this study, a novel alginate hydrogel system that can be micropatterned three‐dimensionally is engineered to create regions that are crosslinked by a single mechanism or dual mechanisms. By manipulating micropattern size while keeping the overall ratio of single‐ to dual‐crosslinked hydrogel volume constant, the physical properties of the micropatterned alginate hydrogels are spatially tunable. When human adipose‐derived stem cells (hASCs) are photoencapsulated within micropatterned hydrogels, their proliferation rate is a function of micropattern size. Additionally, micropattern size dictates the extent of osteogenic and chondrogenic differentiation of photoencapsulated hASC. The size of 3D micropatterned physical properties in this new hydrogel system introduces a new design parameter for regulating various cellular behaviors, and this dual‐crosslinked hydrogel system provides a new platform for studying proliferation and differentiation of stem cells in a spatially controlled manner for tissue engineering and regenerative medicine applications. 相似文献
17.
Oommen P. Oommen Shujiang Wang Marta Kisiel Marije Sloff Jöns Hilborn Oommen P. Varghese 《Advanced functional materials》2013,23(10):1273-1280
The simplicity and versatility of hydrazone crosslinking has made it a strategy of choice for the conjugation of bioactive molecules. However, the labile nature of hydrazone linkages and reversibility of this coupling reaction restricts its full potential. Based on the fundamental understanding of hydrazone stability, this problem is circumvented by resonance‐stabilization of a developing N2 positive charge in a hydrazone bond. A novel chemistry is presented to develop a resilient hydrazone bond that is stable and non‐ reversible under physiological conditions. A carbodihydrazide (CDH) type hydrazide derivative of the biomolecule forms intrinsically stabilized hydrazone‐linkages that are nearly 15‐fold more stable at pH 5 than conventional hydrazone. This chemoselective coupling reaction is catalyst‐free, instantaneous, and virtually non‐cleavable under physiological conditions, therefore can serve as a catalyst‐free alternative to click chemistry. This novel crosslinking reaction is used to tailor a hyaluronan hydrogel, which delivered exceptional hydrolytic stability, mechanical properties, low swelling, and controlled enzymatic degradation. These desired characteristics are achieved without increasing the chemical crosslinking. The in vivo evaluation of this hydrogel revealed neo‐bone with highly ordered collagen matrix mimicking natural bone regeneration. The proximity ligation assay or PLA is used to detect blood vessels, which highlighted the quality of engineered tissue. 相似文献
18.
Yuhui Li Guoyou Huang Xiaohui Zhang Baoqiang Li Yongmei Chen Tingli Lu Tian Jian Lu Feng Xu 《Advanced functional materials》2013,23(6):660-672
Hydrogels find widespread applications in biomedical engineering due to their hydrated environment and tunable properties (e.g., mechanical, chemical, biocompatible) similar to the native extracellular matrix (ECM). However, challenges still exist regarding utilizing hydrogels in applications such as engineering 3D tissue constructs and active targeting in drug delivery, due to the lack of controllability, actuation, and quick‐response properties. Recently, magnetic hydrogels have emerged as a novel biocomposite for their active response properties and extended applications. In this review, the state‐of‐the‐art methods for magnetic hydrogel preparation are presented and their advantages and drawbacks in applications are discussed. The applications of magnetic hydrogels in biomedical engineering are also reviewed, including tissue engineering, drug delivery and release, enzyme immobilization, cancer therapy, and soft actuators. Concluding remarks and perspectives for the future development of magnetic hydrogels are addressed. 相似文献
19.
Bahram Mirani Sean O. Mathew Neda Latifi Michel R. Labrosse Brian G. Amsden Craig A. Simmons 《Advanced functional materials》2024,34(1):2302786
Appropriate load-bearing function of soft connective tissues is provided by their nonlinear and often anisotropic mechanics. Recapitulating such complex mechanical behavior in tissue-engineered structures is particularly crucial, as deviation from native tissue mechanics can trigger pathological biomechanical pathways, causing adverse tissue remodeling and dysfunction. Here, a novel method combining computational modeling, melt electrowriting (MEW), and design of experiments (DOE) is reported to generate scaffolds composed of sinusoidal fibers with prescribed biaxial mechanical properties, recapitulating the distinct nonlinear, anisotropic stress–strain behavior of three model tissues: adult aortic valve, pediatric pulmonary valve, and pediatric pericardium. Finite element analysis is used to efficiently optimize scaffold architecture over a broad parameter space, representing up to 65 conditions, to define MEW print parameters to achieve polycaprolactone scaffolds with target mechanical properties. Architectural parameters are further optimized experimentally using DOE and regression to account for uncertainties involved in the simulation, yielding functional scaffolds with accurate, prescribed mechanics. The prescribed architecture also primarily governs the mechanics of hybrid structures generated by casting cell-laden fibrin hydrogel within the scaffolds. This high-fidelity approach recapitulates biaxial mechanical properties over a broad range of mechanical nonlinearity and anisotropy and is generalizable for programmed biofabrication in a variety of tissue engineering applications. 相似文献
20.
Melt Electrowriting Allows Tailored Microstructural and Mechanical Design of Scaffolds to Advance Functional Human Myocardial Tissue Formation
下载免费PDF全文
![点击此处可从《Advanced functional materials》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Miguel Castilho Alain van Mil Malachy Maher Corina H. G. Metz Gernot Hochleitner Jürgen Groll Pieter A. Doevendans Keita Ito Joost P. G. Sluijter Jos Malda 《Advanced functional materials》2018,28(40)
Engineering native‐like myocardial muscle, recapitulating its fibrillar organization and mechanical behavior is still a challenge. This study reports the rational design and fabrication of ultrastretchable microfiber scaffolds with controlled hexagonal microstructures via melt electrowriting (MEW). The resulting structures exhibit large biaxial deformations, up to 40% strain, and an unprecedented compliance, delivering up to 40 times more elastic energy than rudimentary MEW fiber scaffolds. Importantly, when human induced pluripotent stem cell‐derived cardiomyocytes (iPSC‐CM) are encapsulated in a collagen‐based hydrogel and seeded on these microstructured and mechanically tailored fiber scaffolds, they show an increase in beating rate (1.5‐fold), enhanced cell alignment, sarcomere content and organization as well as an increase in cardiac maturation‐related marker expression (Cx43 1.8‐fold, cardiac Actin 1.5‐fold, SERCA2a 2.5‐fold, KCNJ2 1.5‐fold, and PPARGC1a 3.6‐fold), indicative of enhanced iPSC‐CM maturation, as compared to rudimentary fiber scaffolds. By combining these novel fiber scaffolds with clinically relevant human iPSC‐CMs, a heart patch that allows further maturation of contractile myocytes for cardiac tissue engineering is generated. Moreover, the designed scaffold allows successful shape recovery after epicardial delivery on a beating porcine heart, without negative effects on the engineered construct and iPSC‐CM viability. 相似文献