Synthesis and characterization of PMMA‐b‐PBMA block copolymers by atom transfer radical polymerization

The synthesis of diblock copolymers using atom transfer radical polymerization, ATRP, of n‐butyl methacrylate, BMA, and methyl methacrylate, MMA, is reported. These copolymers were prepared from 2‐bromoisobutyryl‐terminated macroinitiators of poly(MMA) and poly(BMA), using copper chloride, CuCl,/N,N,N′,N″,N″‐pentamethyldiethylenetretramine, PMDETA, as the catalyst system, at 100°C in bulk and in benzonitrile solution. The block copolymers were characterized by means of size‐exclusion chromatography, SEC, and ¹H‐NMR spectroscopy. The SEC analysis of the synthesized diblock copolymers confirmed important differences in the molecular weight control depending on the reaction medium (solvent effect) and the chemical structure of the macroinitiator used. In addition, differential scanning calorimetry, (DSC) measurements were performed, showing for all the copolymers a phase separation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2683–2691, 2002     

Chemoenzymatic synthesis of Y‐shaped amphiphilic block copolymers and their micellization behavior

BACKGROUND: Y‐shaped block copolymers are a type of special star polymer that have received considerable attention due to their unique morphologies and phase behavior. This research is based on the preparation of novel Y‐shaped block copolymers using enzymatic ring‐opening polymerization (eROP) and atom‐transfer radical polymerization (ATRP), followed by an investigation of their micellization properties. RESULTS: Y‐shaped block copolymers consisting of polycaprolactone and poly(glycidyl methacrylate) were synthesized successfully by the combination of eROP and ATRP. NMR, gel permeation chromatography (GPC), Fourier transform infrared and atomic force microscopy analyses confirmed the compositions of the block copolymers. The dispersity obtained from GPC was less than 1.4, which indicated a control of the polymerization. The self‐assembly behavior of the Y‐shaped block copolymers was investigated in aqueous media. Aggregates of various morphologies (such as spherical micelles, lamellae, worm‐like micelles and large compound micelles) were observed. In addition, it was found that both the copolymer composition and concentration in tetrahydrofuran greatly influenced the morphologies of the aggregates. CONCLUSION: The results suggest that the Y‐shaped diblock copolymers can be synthesized by simple methods. They have various morphologies, including normal spherical micelles, lamellae, worm‐like micelles and large compound micelles. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (Pst‐b‐PDMS‐b‐PSt) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide, resulting in the PDMS macroinitiators for the ATRP of styrene (St). The latter procedure was carried out at 130°C in a phenyl ether solution with CuCl and 4, 4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. By using this technique, triblock copolymers consisting of a PDMS center block and polystyrene terminal blocks were synthesized. The polymerization was controllable; ATRP of St from those macroinitiators showed linear increases in M_n with conversion. The block copolymers were characterized with IR and ¹H‐NMR. The effects of molecular weight of macroinitiators, macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3764–3770, 2004     

Synthesis and characterization of PBMA‐b‐PDMS‐b‐PBMA copolymers by atom transfer radical polymerization

Poly(butyl methylacrylate)–b–poly(dimethylsiloxane)–b–poly(butyl methylacrylate) (PBMA–b–PDMS–b–PBMA) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). The reaction of α,ω‐dichloride PDMS with 2′‐hydroxyethyl‐2‐bromo‐2‐methylpropanoate gave suitable macroinitiators for the ATRP of BMA. The latter procedure was carried out at 110°C in a phenyl ether solution with CuCl and 4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. The polymerization was controllable, with the increase of the monomer conversion, there was a nearly linear increase of molecular weight and a decrease of polydispersity in the process of the polymerization, and the rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with IR and ¹H‐NMR and differential scanning calorimetry. The effects of macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 532–538, 2004     

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation,characterization, and thermal properties

In recent years, much attention has been given to the development of specialty polymers from useful materials. In this context, amphiphilic block copolymers were prepared by atom transfer radical polymerization (ATRP) of N‐phenylmaleimide (N‐PhMI) or styrene using a poly(2‐hydroxyethylmethacrylate)‐Cl macroinitiator/CuBr/bipyridine initiating system. The macroinitiator P(HEMA)‐Cl was directly prepared in toluene by reverse ATRP using BPO/FeCl₃ 6 H₂O/PPh₃ as initiating system. The microstructure of the block copolymers were characterized using FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopic techniques and scanning electron microscopy (SEM). The thermal behavior was studied by differential scanning calorimetry (DSC), and thermogravimetry (TG). The theoretical number average molecular weight (M_n,th) was calculated from the feed capacity. The microphotographs of the film's surfaces show that the film's top surfaces were generally smooth. The TDT of the block copolymer P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ of about 290°C was also lower than that found for the macroi′nitiator poly(HEMA)‐Cl. The block copolymers exhibited only one T_g before thermal decomposition, which could be attributed to the low molar content of the N‐PhMI or St blocks respectively. This result also indicates that the phase behavior of the copolymers is predominately determined by the HEMA block. The curves reveal that the polymers show phase transition behavior of amorphous polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and morphology transformation of amphiphilic diblock polyurethane copolymers in aqueous solution

Amphiphilic block copolymers possess both hydrophobic and hydrophilic properties and can form versatile micellar structures in aqueous solution. The aim of the research presented was to prepare a series of non‐ionic amphiphilic diblock polyurethane copolymers (PUn) based on isophorone diisocyanate, monoallyl‐end‐capped poly(ethylene oxide) and poly(propylene oxide) (PPO), followed by an investigation of their micellization properties and morphology transformation in aqueous solution. The PUn samples were synthesized by condensation polymerization. These polyurethanes exhibit surface tension as low as 33.7–37.0 mN m^?1. There is an obvious decrease in critical micelle concentration as the hydrophobic PPO molecular weight increases. According to transmission electron microscopy, the morphology of aggregates of the copolymers can be tuned by varying the concentration in aqueous solution rather than organic solvent. For example, for PU7, large compound micelles are produced instead of vesicles. For PU17, the concentration can be used to control the size and thickness of vesicles. Vesicle size increases from 60 to 500 nm and vesicle thickness from 40 to 60 nm with concentration ranging from 0.003 to 0.03 wt%. The study shows that the copolymers in aqueous solution have excellent surface activities. In addition, they can self‐assemble into large compound micelles or vesicles at certain concentrations. Moreover, the synthesis method described allows one to obtain a desired morphology of aggregates by adjusting the composition of hydrophilic and hydrophobic segments, which provides a novel and simple way to obtain particles on the nanometer scale. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of amphiphilic star block copolymers with star macroinitiators based on a one‐pot approach

Previously, star polystyrenes (PSs) have been prepared by atom transfer radical polymerization (ATRP) of N‐[2‐(2‐bromoisobutyryloxy)ethyl]maleimide (BiBEMI) with a large excess of styrene (St) in one pot. But linear PSs were also present during the formation of the star polymers. In the work reported here, we found that control of the formation of star polymers using a one‐pot approach can be improved by using a two‐step process. The polymerization was conducted first at a low temperature to form multifunctional cores by copolymerization of BiBEMI and St. Second, on increasing the temperature, homopolymerization of St occurred to grow PS arms. Then a series of amphiphilic star polystyrene‐block‐poly(acrylic acid)s, (S₁₄A_x)₁₆, were prepared by ATRP of tert‐butyl acrylate with the star PSs as macroinitiators, followed by selective acidolysis of the poly(tert‐butyl acrylate) blocks. Their micellization was studied using dynamic light scattering, which suggested that (S₁₄A₁₁₂)₁₆ amphiphilic star block copolymers could form unimolecular micelles in a basic aqueous solution. Then pyrene molecules were encapsulated using the (S₁₄A₁₁₂)₁₆ amphiphilic star copolymers and the loading capacity was investigated with UV and fluorescence spectroscopy. © 2013 Society of Chemical Industry     

Synthesis and self‐assembly behavior of pH‐responsive amphiphilic copolymers containing ketal functional groups

Polymeric micelles that are responsive to pH are particularly attractive for application in drug delivery systems. In this study, one type of amphiphilic block copolymers with hydrophobic building blocks bearing pH‐sensitive ketal groups was designed. In an acidic environment, the polarity transfer from amphiphile to double hydrophile for this copolymer destroyed the driving force of micelle formation, which triggered the release of encapsulated hydrophobic molecules. The amphiphilic block copolymers monomethoxy‐poly(ethylene glycol)‐block‐poly(2,2‐dimethyl‐1,3‐dioxolane‐4‐yl)methyl acrylate (MPEG‐block‐PDMDMA) was fabricated by atom transfer radical polymerization using MPEG‐Br as macroinitiator. The critical micelle concentration of various compositions of this copolymer in aqueous solution ranged from 4.0 to 10.0 mg L^?1, and the partition equilibrium constant (K_v) of pyrene in micellar solutions of the copolymers varied from 1.61 × 10⁵ to 4.86 × 10⁵. Their overall effective hydrodynamic diameters from dynamic light scattering measurements were between 80 and 400 nm, and the micellar morphology showed spherical geometry as investigated using transmission electron microscopy. At pH = 1.0, all of these polymeric micelles presented 100% payload release in 24 h of incubation, while at pH = 3.0, nearly 70 and 25% of pyrene was released for MPEG‐block‐PDMDMA (44/18) and MPEG‐block‐PDMDMA (44/25) in 260 h, respectively. The pH‐responsive MPEG‐block‐PDMDMA polymeric micelles having good encapsulation efficiency for hydrophobic drugs are potential candidates for biomedical and drug delivery applications. Copyright © 2010 Society of Chemical Industry     

Stabilization of CO2‐in‐water emulsions with high internal phase volume using PVAc‐b‐PVP and PVP‐b‐PVAc‐b‐PVP as emulsifying agents

Two newly‐designed hydrocarbon surfactants, that is, poly(vinyl acetate)‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PVAc‐b‐PVP) and PVP‐b‐PVAc‐b‐PVP, were synthesized using reversible addition–fragmentation chain transfer polymerization and used to form CO₂/water (C/W) emulsions with high internal phase volume and good stability against flocculation and coalescence up to 60 h. Their structures were precisely determined by nuclear magnetic resonance, gel permeation chromatography, thermal gravimetric analysis, and differential scanning calorimetry. Besides low temperature and high CO₂ pressure, the surfactant structures were the key factors affecting the formation and stability of high internal phase C/W emulsions, including the polymerization degrees of CO₂‐philic block (PVAc) and hydrophilic block (PVP), as well as the number of hydrophilic tail. The surface tension of the surfactant aqueous solution and the apparent viscosity of the C/W emulsions were also measured to characterize the surfactants efficiency and effectiveness. The surfactants with double hydrophilic tails showed stronger emulsifying ability than those with single hydrophilic tail. The great enhancement of the emulsions stability was due to decrease of the interface tension as well as increase of the steric hindrance in the water lamellae, preventing a frequent collision of CO₂ droplets and their fast coalescence. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46351.     

Synthesis and characterization of amphiphilic PMTFPS‐b‐PEO diblock copolymers

A series of new amphiphilic poly[methyl(3,3,3‐trifluoropropyl) siloxane]‐b‐poly(ethyleneoxide) (PMTFPS‐b‐PEO) diblock copolymers with different ratio of hydrophobic segment to hydrophilic segment were prepared by coupling reactions of end‐functional PMTFPS and PEO homopolymers. PMTFPS‐b‐PEO diblock copolymers synthesized were shown to be well defined and narrow molecular weight distributed by characterizations such as NMR, GPC, and FTIR. Additionally, the solution properties of these diblock copolymers were investigated using tensiometry and transmission electron microscopy. Interestingly, the critical micellization concentration increases with increasing length of hydrophobic chain. Transmission electron microscopy studies showed that PMTFPS‐b‐PEO diblock copolymers in water preferentially aggregated into vesicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Structure,mechanical, and thermal behavior of nylon 6‐polyisoprene block copolymers obtained via anionic polymerization

The structure and physicomechanical properties of nylon 6 (N‐6) modified with polyethylene oxide–polyisoprene–polyethylene oxide (PEO‐PI‐PEO) copolymers via activated anionic polymerization have been investigated by using differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), thermogravimetric analysis (TGA), dynamic mechanical analysis (DTMA), and by optical microscopy. This study deals with the influence that the N‐6/PI ratio and the length of the PI segments have on the physicomechanical behavior, thermal stability, and the structural changes of the block copolymers. Literature does not report on previous investigations of this kind. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3251–3258, 2004     

Solubility behavior of amphiphilic sulfonated copolymers based on styrene–stearyl methacrylate and styrene–stearyl cinnamate

Amphiphilic polymers have found many applications, so many types of these copolymers have been prepared. Specifically, sulfonated polystyrene acts, for example, as a flocullant or dispersant of petroleum asphaltenes as a function of its hydrophilic–hydrophobic balance. However, when changing the sulfonation degree, looking for the best performance, the solubility also changes, and sometimes it is responsible for making the polymer unsuitable for any application. Therefor, this work investigates in detail the changes in the solubility range of copolymers based on styrene–stearyl methacrylate and styrene–stearyl cinnamate with different molar compositions and different sulfonation degrees. The copolymers were synthesized and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and elemental analysis. In the range of compositions analyzed, with increasing content of long hydrocarbon chains, not only the displacement of the solubility in solvents with lower solubility parameter (δ), but also the broadening of the solubility range was observed. In general, the solubility was directly related to the sulfonic group content, but there appeared to be an influence of the randomness of the sulfonation reactions along the chains. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43112.     

Self‐assembled nanostructures: preparation,characterization, thermal,optical and morphological characteristics of amphiphilic diblock copolymers based on poly(2‐hydroxyethyl methacrylate‐block‐N‐phenylmaleimide)

A series of well‐defined amphiphilic poly[(2‐hydroxyethyl methacrylate)‐block‐(N‐phenylmaleimide)] diblock copolymers containing hydrophilic and hydrophobic blocks of different lengths were synthesized by atom transfer radical polymerization. The properties of the diblock copolymers and their ability to form large compound spherical micelles are described. Their optical, morphological and thermal properties and self‐assembled structure were also investigated. The chemical structure and composition of these copolymers have been characterized by elemental analysis, Fourier transform infrared, ¹H NMR, UV–visible and fluorescence spectroscopy, and size exclusion chromatography. Furthermore, the self‐assembly behavior of these copolymers was investigated by transmission electron microscopy and dynamic light scattering, which indicated that the amphiphilic diblock copolymer can self‐assemble into micelles, depending on the length of both blocks in the copolymers. These diblock copolymers gave rise to a variety of microstructures, from spherical micelles, hexagonal cylinders to lamellar phases. © 2013 Society of Chemical Industry     

Polyamide‐6‐b‐polybutadiene block copolymers: Synthesis and properties

Polyamide‐6 (PA6)/polybutadiene (PB) block copolymers were synthesized with macroactivators (MAs) based on hydroxyl‐terminated polybutadiene functionalized with diisocyanates and having three N‐acyllactam chain‐growing centers per molecule. Two different diisocyanates, hexamethylene diisocyanate and isophorone diisocyanate, were applied as precursors for the MAs. The sodium salt of ε‐caprolactam was chosen as an initiator. The influence of the MA type and concentration on the anionic ring‐opening polymerization of ε‐caprolactam at 180°C was studied. A large percentage of the gel fraction in the copolymers was estimated, indicating crosslinked macromolecules. The structure and phase behavior of the copolymers were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, thermogravimetric analysis, and dynamic mechanical thermal analysis. In the copolymers, only the PA6 chains crystallized, and the crystallinity depended on the PB content. Different glass‐transition temperatures for the PB blocks and PA6 blocks were observed, indicating microphase separation in the copolymers. The mechanical properties of the copolymers were studied by notched impact testing and hardness measurements. The impact strength increased linearly with the soft component concentration up to 10 wt % and reached values six times higher than those of the PA6 homopolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 711–717, 2003     

Synthesis and self-assembly behaviors of three-armed amphiphilic block copolymers via RAFT polymerization

The novel trifunctional reversible addition-fragmentation chain transfer (RAFT) agent, tris(1-phenylethyl) 1,3,5-triazine-2,4,6-triyl trithiocarbonate (TTA), was synthesized and used to prepare the three-armed polystyrene (PS₃) via RAFT polymerization of styrene (St) in bulk with thermal initiation. The polymerization kinetic plot was first order and the molecular weights of polymers increased with the monomer conversions with narrow molecular weight distributions (M_w/M_n ≤ 1.23). The number of arms of the star PS was analyzed by gel permeation chromatography (GPC), ultraviolet visible (UV-vis) and fluorescence spectra. Furthermore, poly(styrene-b-N-isopropylacrylamide)₃ (PS-b-PNIPAAM)₃, the three-armed amphiphilic thermosensitive block copolymer, with controlled molecular weight and well-defined structure was also successfully prepared via RAFT chain extension method using the three-armed PS obtained as the macro-RAFT agent and N-isopropylacrylamide as the second monomer. The copolymers obtained were characterized by GPC and ¹H nuclear magnetic resonance (NMR) spectra. The self-assembly behaviors of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ in mixed solution (DMF/CH₃OH) were also investigated by high performance particle sizer (HPPS) and transmission electron microscopy (TEM). Interestingly, the lower critical solution temperature (LCST) of aqueous solutions of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ decreased with the increase of relative length of PS in the block copolymers.     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

梳型两亲聚合物的溶液性能研究

对自制的梳型两亲聚合物,聚(苯乙烯-co-马来酸酐)-g-(聚乙二醇单甲醚)(A)、聚(苯乙烯-co-马来酸酐)-g - C12H25OH(B)和聚(苯乙烯-co-马来酸酐)-g-(聚乙二醇单甲醚+C12H25OH)(C)进行了溶液聚集行为、流变性能和对炭黑的分散性能的研究.结果表明,样品水溶液中可以形成粒径为数十至数百纳米的多分散性球形聚集体,粒径分布较宽;25℃时,对不同质量浓度的样品A,B和C水溶液进行了流变性能研究,在相同质量浓度下,样品的疏水性越强,其溶液的剪切变稀行为越强烈;在相同条件下,3.种样品对炭黑的分散性能依次为B＞C＞A,分散性能随着样品疏水性和溶液质量浓度的增加而增强.     

Synthesis of well‐defined amphiphilic block copolymers via AGET ATRP used for hydrophilic modification of PVDF membrane

A well‐defined amphiphilic block copolymer consisting of a hydrophobic block poly(methyl methacrylate) (PMMA) and a hydrophilic block poly[N,N–2‐(dimethylamino) ethyl methacrylate] (PDMAEMA) was synthesized by activator generated by the electron transfer for atom transfer radical polymerization method (AGET ATRP). Kinetics study revealed a linear increase in the graph concentration of PMMA‐b‐PDMAEMA with the reaction time, indicating that the polymer chain growth was consistent with a controlled process. The gel permeation chromatography results indicated that the block copolymer had a narrow molecular weight distribution (Mw/Mn = 1.42) under the optimal reaction conditions. Then, poly(vinylidene fluoride) (PVDF)/PMMA‐b‐PDMAEMA blend membranes were prepared via the standard immersion precipitation phase inversion process, using the block copolymer as additive to improve the hydrophilicity of the PVDF membrane. The presence and dispersion of PMMA‐b‐PDMAEMA clearly affected the morphology and improved the hydrophilicity of the as‐synthesized blend membranes as compared to the pristine PVDF membranes. By incorporating 15 wt % of the block copolymer, the water contact angle of the resulting blend membranes decreased from pure PVDF membrane 98° to 76°. The blend membranes showed good stability in the 20 d pure‐water experiment. The bovine serum albumin (BSA) absorption experiment revealed a substantial antifouling property of the blend membranes in comparison with the pristine PVDF membrane. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42080.     

两亲高分子驱油剂体系的增粘性能和分子聚集行为

通过氧化-还原体系、采用水溶液胶束共聚法制得了一种两亲高分子(FPAM),研究了电解质、温度、表面活性剂等对两亲高分子在水溶液中的聚集体形态以及对水溶液宏观性质的影响。结果表明,高分子在水溶液中存在着特殊分子聚集体,这种聚集体能使高分子具有较强的耐盐抗温性能;在4%的NaCl溶液中,FPAM(1500 mg/L)体系粘度超过100 mPa.s;加入Gemini型表面活性剂(150 mg/L)的FPAM(1500 mg/L)二次水溶液粘度可达2 700 mPa.s。     

Synthesis and aggregation behavior of four types of different shaped PCL‐PEG block copolymers

Biodegradable, amphiphilic, linear (diblock and triblock) and star‐shaped (three‐armed and four‐armed) poly[(ethylene glycol)‐block‐(ε‐caprolactone)] copolymers (PEG–PCL copolymers) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL) with stannous octoate as a catalyst, in the presence of monomethoxypoly(ethylene glycol) (MPEG), poly(ethylene glycol) (PEG), three‐armed poly(ethylene glycol) (3‐arm PEG) or four‐armed poly(ethylene glycol) (4‐arm PEG) as an initiator, respectively. The monomer‐to‐initiator ratio was varied to obtain copolymers with various PEG weight fractions in a range 66–86%. The molecular structure and crystallinity of the copolymers, and their aggregation behavior in the aqueous phase, were investigated by employing ¹H‐NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry, as well as utilizing the observational data of gel–sol transitions and aggregates in aqueous solutions. The aggregates of the PEG–PCL block copolymers were prepared by directly dissolving them in water or by employing precipitation/solvent evaporation technique. The enthalpy of fusion (ΔH_m), enthalpy of crystallization (ΔH_crys) and degrees of crystallinity (χ_c) of PEG blocks in copolymers and the copolymer aggregates in aqueous solutions were influenced by their PEG weight fractions and molecular architecture. The gel–sol transition properties of the PEG–PCL block copolymers were related to their concentrations, composition and molecular architecture. Copyright © 2006 Society of Chemical Industry