Synthesis,crystallographic characterization and ionic conductivity of iron substituted sodium zirconium phosphate Na<Subscript>1.2</Subscript>Zr<Subscript>1.8</Subscript>Fe<Subscript>0.2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Sodium zirconium phosphate NaZr₂P₃O₁₂ (hereafter NZP) crystallizes in rhombohedral (hexagonal) symmetry with the space group R-3c. The NZP-related phase of synthetic iron substituted NZP has been prepared by partial substitution on zirconium site by Fe(III). The material has been synthesized by sintering the finely powdered oxide mixture in a muffle furnace at 1,050 °C. The polycrystalline phase of Na_1.2Zr_1.8Fe_0.2(PO₄)₃ has been characterized by its typical powder diffraction pattern. The powder diffraction data of 3,000 points have been subjected to general structural analysis system (GSAS) software to arrive at a satisfactory structural fit with R _p = 0.0623 and R _wp = 0.0915. The following unit cell parameters have been calculated: a = b = 8.83498(18) ?, c = 22.7821(8) ? and α = β = 90.0° γ = 120.0°. The structure of NZP consists of ZrO₆ octahedra and PO₄ tetrahedra linked by the corners to form a three-dimensional network. Each phosphate group is on a two-fold rotation axis and is linked to four ZrO₆ octahedra. Each zirconium octahedron lies on a threefold rotation axis and is connected to six PO₄ tetrahedra. AC conductivity of the solid solution has been measured between 303 and 773 K. The material exhibits temperature-dependent enhancement of ionic conduction by ≈400 times at elevated temperatures. The activation energies show significant change in slope at 1,000/T = 2.23(448 K).     

Fabrication of NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-type ceramic materials by spark plasma sintering

Ceramic materials based on Ca_0.5Zr₂(PO₄)₃ and NaFeNb(PO₄)₃, structural analogs of NaZr₂(PO₄)₃ (NZP), were prepared by spark plasma sintering. At sintering temperatures of 1100–1200 and 880°C and sintering times of 12 and 3 min, the relative densities reached were 99.1 and 99.9%, respectively. According to X-ray diffraction data, the sintering process caused no changes in phase composition. The ceramics had a dense, homogeneous microstructure and ranged in grain size from 0.5 to 2.5 μm.     

Synthesis and properties of AgTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-based NASICON-type phosphates doped with Nb<Superscript>5+</Superscript>, Zr<Superscript>4+</Superscript>, and Ga<Superscript>3+</Superscript>

We have synthesized materials based on a silver titanium phosphate with partial substitution of tri-, tetra-, or pentavalent cations for titanium: Ag_1±x Ti_2−x M _x (PO₄)₃ (M = Nb⁵⁺, Ga³⁺) and AgTi_2−x Zr _x (PO₄)₃. The materials have been characterized by X-ray diffraction and impedance spectroscopy and have been shown to have small thermal expansion coefficients. Their ionic conductivity has been determined. Silver ions in these materials are difficult to replace with protons.     

Phase transitions of the NASICON-type mixed phosphates LiM<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> (M = Ti,Zr) and LiInNb(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The structural phase transitions of LiTi₂(PO₄)₃, LiInNb(PO₄)₃, and LiZr₂(PO₄)₃ have been studied by X-ray diffraction, impedance spectroscopy, ⁷Li NMR spectroscopy, and calorimetry. The results indicate that, as the temperature is raised, the lithium ions in the structure of LiTi₂(PO₄)₃ and LiInNb(PO₄)₃ redistribute between the M1 and M2 sites. The thermal expansion coefficients along the crystallographic axes of LiTi₂(PO₄)₃ and LiInNb(PO₄)₃ are estimated.     

Preparation and Thermal Expansion of Calcium Iron Zirconium Phosphates with the NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> Structure

Ca_{0.5(1 + x)}Zr_2–xFe _x (PO₄)₃ phosphates have been synthesized by a sol–gel process. The individual compounds and solid solutions obtained crystallize in the NaZr₂(PO₄)₃ structure (trigonal symmetry, sp. gr. R\(\bar 3\)). Using high-temperature X-ray diffraction, we have determined their thermal expansion parameters in the temperature range from 25 to 800°C. With increasing x, the magnitudes of their linear thermal expansion coefficients and thermal expansion anisotropy decrease. Most of the synthesized phosphates can be rated as low-thermal-expansion compounds and can be regarded as materials capable of withstanding thermal “stress.”     

Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Synthesis and study of uranyl phosphates (UO<Subscript>2</Subscript>)<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>·<Emphasis Type="Italic">n</Emphasis>H<Subscript>2</Subscript>O

Uranyl phosphate (UO₂)₃(PO₄)₂·8H₂O was synthezied. Its dehydration was studied by X-ray diffraction, IR spectroscopy, and thermal and chemical analysis. The dehydration products were isolated and characterized by X-ray diffraction and IR spectroscopy. Their structural features were determined.     

Superprotonic CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript>-CsHSO<Subscript>4</Subscript> solid solutions

We have performed partial HSO₄⁻ substitution in CsH₂PO₄ and studied the associated structural changes and the proton conductivity of the resultant (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions in the range x = 0.01–0.3. The results indicate that, at room temperature, the solid solutions are disordered. In the range x = 0.01–0.1, they are isostructural with the low-temperature phase of CsH₂PO₄ (sp. gr. P2₁/m), and their unit-cell parameters increase with x, whereas in the range x = 0.15–0.3 the solid solutions are isostructural with the high-temperature, cubic phase of CsH₂PO₄ (Pm3m), and their unit-cell parameter decreases. The conductivity of the (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions with x ≤ 0.3 depends significantly on their composition and increases at low temperatures by up to four orders of magnitude, approaching that of the superionic phase of CsH₂PO₄ in the range x = 0.15–0.3 because of the hydrogen bond weakening and increased proton mobility. The conductivity of the superionic phase decreases with increasing x by no more than a factor of 1.5–2, and the superionic phase transition, which occurs at 231°C in CsH₂PO₄, shifts to lower temperatures and disappears for x ≥ 0.15. The activation energy for low-temperature conduction decreases with increasing x: from 0.9 eV in CsH₂PO₄ to 0.48 eV at x = 0.1.     

Phase conversion and spectral properties of long lasting phosphor Zn<Subscript>3</Subscript> (PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Mn<Superscript>2+</Superscript>, Ga<Superscript>3+</Superscript>

A red long lasting phosphor Zn₃(PO₄)₂:Mn²⁺,Ga³⁺ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from α-Zn₃(PO₄)₂, β-Zn₃(PO₄)₂ toγ-Zn₃(PO₄)₂ occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.     

Proton Conductivity and Thermal Properties of Ba(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

We have grown single crystals of barium dihydrogen phosphate and studied its thermal transformations during heating to 500°C and its electrotransport properties. Ba(H₂PO₄)₂ (Pccn) has been shown to undergo no phase transitions up to its dehydration temperature. The thermal decomposition of Ba(H₂PO₄)₂, accompanied by dehydration, involves two steps, with maximum rates at ~265 and 370°C, and results in the formation of barium dihydrogen pyrophosphate and barium metaphosphate, respectively. The total enthalpy of the endothermic dehydration events is–244.6 J/g. Using impedance spectroscopy, we have studied in detail the proton conductivity of polycrystalline and single-crystal Ba(H₂PO₄)₂ samples in a controlled atmosphere. Adsorbed water has been shown to have a significant effect on the proton conductivity of Ba(H₂PO₄)₂ up to 130°C. The proton conductivity of the Ba(H₂PO₄)₂ single crystals has been shown to be anisotropic. The conductivity anisotropy correlates with specific structural features of the salt. Higher conductivity values, 3 × 10^–9 to 2 × 10^–7 S/cm in the range 60–160°C, have been observed in the [100] crystallographic direction, exceeding the conductivity along [010] by an order of magnitude. The activation energy for proton conduction is 0.80 eV.     

Cesium and Its Analogs,Rubidium and Potassium,in Rhombohedral [NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> Type] and Cubic (Langbeinite Type) Phosphates: 1. Crystal-Chemical Studies

The published crystallographic data on cesium, rubidium, and potassium phosphates crystallizing in the NaZr₂(PO₄)₃ (NZP) and langbeinite structural types are summarized and correlated. The existence of new phosphates, analogs of langbeinite mineral, is predicted. The phosphates of the suggested compositions are prepared and studied by X-ray and neutron diffraction and by IR spectroscopy. Phosphates of the formulas A₂RM(PO₄)₃, A₂B_0.5Zr_1.5(PO₄)₃, and ABR₂(PO₄)₃ have a cubic cell, space group P2₁3. The unit cell parameters of the phosphates in these series vary only slightly with variation of the cationic composition. Variations in the bond lengths and bond angles in the langbeinite structure depending on the cation are estimated from the results of structural studies. Cesium can be incorporated in cubic framework phosphates in an amount of up to 38 wt %. The langbeinite structure is characterized by wide possibilities of isomorphous substitutions involving large alkali and alkaline-earth metal cations arranged in the framework voids and small cations of p, d, and f elements in oxidation states 2+, 3+, and 4+, arranged in the framework positions. A specific role of lanthanides in formation of the langbeinite-type framework is noted.__________Translated from Radiokhimiya, Vol. 47, No. 3, 2005, pp. 203–212.Original Russian Text Copyright © 2005 by A. Orlova, V. Orlova, Buchirin, Beskrovnyi, Kurazhkovskaya.     

Electrical Conductivity and Electrochemical Characteristics of Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Based NASICON-Type Materials

NASICON-type materials with the compositions Na₃V_2–xAl_x(PO₄)₃, Na₃V_{2 - x}Fe_x(PO₄)₃, Na_{3 + x}V_2–xNi_x(PO₄)₃, and Na₃V_{2 - x}Cr_x(PO₄)₃ (x = 0, 0.03, 0.05, and 0.1) have been prepared and characterized by X-ray diffraction analysis, electron microscopy, and impedance spectroscopy. The results demonstrate that the highest electrical conductivity among the samples studied is offered by the material doped with 5% Fe: Na₃V_1.9Fe_0.1(PO₄)₃. The activation energy for low-temperature conduction in the doped materials decreases from 84 ± 2 to 54 ± 1 kJ/mol and that for high-temperature conduction is ~33 kJ/mol. The discharge capacity of Na₃V_1.9Fe_0.1(PO₄)₃/C under typical working conditions of cathodes of sodium ion batteries has been shown to exceed that of Na₃V₂(PO₄)₃/C. The capacity of the more porous material prepared by the Pechini process (Na₃V_1.9Fe_0.1(PO₄)₃/C-{II}) approaches the theoretical one at a low charge–discharge rate and retains its high level as the charge rate is raised (its discharge capacity was 117.6, 108.8, and 82.6 mAh/g at a discharge rate of 0.1C, 2C, and 8C, respectively).     

Thermodynamic properties of NaZr<Subscript>2</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The heat capacity C _p ⁰ of crystalline NaZr₂(AsO₄)₃ has been measured in the range 7–650 K using precision adiabatic calorimetry and differential scanning calorimetry. The experimental data have been used to calculate the standard thermodynamic functions of the arsenate: C _p ⁰, enthalpy H ⁰(T) − H ⁰(0), entropy S ⁰(T), and Gibbs function G ⁰(T) − H ⁰(0) from T → 0 to 650 K. The standard entropy of its formation from elements is Δ_f S ⁰(NaZr₂(AsO₄)₃, cr, 298.15 K) = −1087 ± 1 J/(mol K).     

Anhydrous Lanthanide and Actinide(III) and (IV) Orthophosphates Me<Subscript>m</Subscript>(PO<Subscript>4</Subscript>)<Subscript>n</Subscript>. Synthesis,Crystallization, Structure,and Properties

Anhydrous orthophosphates Me_m(PO₄)_n, where Me is an element in the oxidation state +1 (A), +2 (B), +3 (R), +4 (M), or +5 (C), containing f elements(III) and (IV), are systematized. Their crystallographic characteristics are described, and the common and specific features of structure formation are discussed. The main structural (mineral) types realized in lanthanide and actinide phosphates are revealed: eulytite, zircon, monazite, NaZr₂(PO₄)₃ (NZP), NaTh₂(PO₄)₃ (NThP), rhabdophane, Sb_0.5Bi_1.5(PO₄)₃ (SbBi), whitlockite, arcanite, glaserite, langbeinite, scheelite, Sc₂(WO₄)₃ (ScW). The crystal-chemical factors determining the stability of structures, polymorphism of cations, morphotropy in the series, and possibility of formation of solid solutions on the basis of iso- and heterovalent isomorphism and isodimorphism are analyzed. The possibility of predicting new compounds of f elements of the expected structure is demonstrated.__________Translated from Radiokhimiya, Vol. 47, No. 1, 2005, pp. 15–30.Original Russian Text Copyright © 2005 by Orlova, Kitaev.     

Mn-doped Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> nanocrystal with enhanced electrochemical properties based on aerosol synthesis method

Mn-doped Li₃V_2?x Mn _x (PO₄)₃ nanocrystals with enhanced electrochemical properties for lithium-ion batteries were synthesized by aerosol process successfully. The nanocrystals synthesized from aerosol-assisted spray process have an average particle size smaller than 500 nm, with some initial particle size of about 100 nm. The Mn-doped Li₃V₂(PO₄)₃ cathode materials show higher capacity and coulombic efficiency than pure Li₃V₂(PO₄)₃ materials. Especially, the Mn-doped Li₃V_1.94Mn_0.06(PO₄)₃ shows a capacity of 130 mAh/g in the voltage range of 3.0–4.4 V and a coulombic efficiency of 99.5 % at 1C. The results from XRD, SEM, HRTEM, and EIS suggested that lattice changes of Li₃V₂(PO₄)₃ due to Mn doping and the fine particles enabled by aerosol-assisted spray process can significantly reduce the charge-transfer resistance and improve the apparent Li⁺ diffusion coefficient of insertion/desertion in the electrodes, which were the critical reason of better electrochemical performance of Mn-doped Li₃V₂(PO₄)₃ cathode materials.     

Thermal expansion studies on the Sodium Zirconium Phosphate family of compounds A1/2M2 (PO4)3: effect of interstitial and framework cations

Thermal expansion of the sodium zirconium phosphate (NZP) family of compounds A_1/2M₂(PO₄)₃ (A = Ca or Sr; M = Ti, Zr, Hf or Sn) has been measured in the temperature range 298–1273 K by high-temperature X-ray powder diffractometry. Some of the compounds in the series (calcium zirconium phosphate and calcium hafnium phosphate) display the typical thermal expansion behaviour of NZP compounds, namely expansion along the hexagonal c axis and contraction along the a axis. The other compounds, depending on their interstitial and framework composition, behave differently. The observed axial thermal expansion and contraction behaviour is explained on the basis of the crystal chemistry of the compounds. Low-expansion compounds in this series are identified and their expansion anisotropy examined. Infared spectra of the compounds are reported. Differential scanning calorimetry measurements on the tin compounds indicate the occurrence of a diffuse phase transformation at high temperatures.     

Electrical conduction properties of Sr-doped Bi<Subscript>4</Subscript>(SiO<Subscript>4</Subscript>)<Subscript>3</Subscript> with the eulytite-type structure

Electrical conduction in 1 mol% Sr-doped Bi₄(SiO₄)₃ with the eulytite-type structure at elevated temperatures was investigated with conductivity measurements. Conductivity of the material under wet condition was higher than that under dry condition, and were 1.2 × 10⁻⁶ – 9.7 × 10⁻⁵ S cm⁻¹ at 500–850 ^°C. From H/D isotope effects and p(O₂)-dependencies of the conductivity, it was found that the Sr-doped Bi₄(SiO₄)₃ exhibited protonic conduction at all the temperatures investigated while contribution of p-type conduction became significant with increasing p(O₂) and/or temperature. Protonic and p-type conductions in the material were discussed in terms of defect equilibria.     

Synthesis and conductivity studies of Li<Subscript>1.5</Subscript>Al<Subscript>0.5</Subscript>Ge<Subscript>1.5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> solid electrolyte

This paper describes the preparation of a lithium ion conducting solid electrolyte with the composition Li_1.5Al_0.5Ge_1.5(PO₄)₃ by a new liquid-phase method with the use of the water-soluble salts Al(NO₃)₃ · 9H₂O, LiNO₃ · 3H₂O, and (NH₄)₂HPO₄ and the germano-oxalic acid H₂[Ge(C₂O₄)₃]. The synthesized materials have been characterized by X-ray diffraction, differential scanning calorimetry, thermogravimetry, and impedance spectroscopy. The results demonstrate that sintering of the synthesized amorphous powders at a temperature of 650°C leads to the formation of phase-pure Li_1.5Al_0.5Ge_1.5(PO₄)₃. The ionic conductivity of the electrolyte measured at frequencies from 10 Hz to 2 MHz using pellets with an 86% relative density was 4.2 × 10^–4 S/cm.     

Luminescence of Ce<Superscript>3+</Superscript> ion doped in SrZn<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphor under excitation of vacuum ultraviolet

Ce³⁺ doped SrZn₂(PO₄)₂ was prepared by high temperature solid-state reaction. The phosphor was investigated by X-ray powder diffraction, scanning electron microscope, and FT-IR measurements. Spectroscopic properties of the phosphor were characterized by vacuum ultraviolet spectroscopy. According to the excitation spectrum, the five 5d levels corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were clearly identified. The observed excitation bands in the VUV region are due to the PO₄³⁻ anion groups of the host, in which energy transfer to Ce³⁺ ions is rather efficient. The emission bands corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were analyzed. The barycenter of Ce³⁺ ions, host absorption bands, crystal field splitting, emission wavelength and Stokes shift were calculated and discussed.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.