共查询到20条相似文献,搜索用时 78 毫秒
1.
水性聚氨酯涂料复合改性研究及应用进展 总被引:1,自引:0,他引:1
综述了水性聚氨酯涂料环氧树脂改性、有机硅改性、丙烯酸酯改性、有机硅丙烯酸酯双改性、纳米材料、植物油改性这几种不同复合改性技术的特点和方法,同时介绍了水性聚氨酯涂料在木器涂料、汽车涂料、建筑涂料、防腐涂料、织物涂料等方面的应用研究进展。 相似文献
2.
3.
4.
从紫外光固化聚氨酯–丙烯酸酯(UV–PUA)涂料的固化原理着手,重点介绍了这种涂料近年来的一些发展状况。综述了几种新型紫外光固化聚氨酯–丙烯酸酯涂料——水分散型、双重固化型和改性型的研究进展,改性型包括有机硅/有机氟改性、纳米改性和超支化聚合改性等。对未来紫外光固化聚氨酯–丙烯酸酯涂料的研发方向提出了几点建议。 相似文献
5.
6.
本文对有机硅丙烯酸酯涂料、有机硅环氧树脂涂料的乳液聚合制备方法及其耐热性、稳定性和影响因素进行归纳总结。通过化学改性的有机硅树脂更适合于涂料应用。 相似文献
7.
8.
9.
10.
11.
Alumina and zirconia acrylate nanocomposites coatings for wood flooring: Photocalorimetric characterization 总被引:1,自引:0,他引:1
Radiation curable coatings are presently the standard in wood flooring industries, although important improvements can still be brought to these coatings. In this work, nanocomposites coatings for wood flooring were prepared from various acrylate reactives. Nanoparticles were added in the neat acrylate formulation prepared from two acrylate monomers, two acrylate oligomers, a defoaming agent and a photoinitiator. Particle size characterization was performed by a dynamic light scattering technique. Reinforcing agents and coupling agents addition effects on acrylate resin conversion were studied by photo-calorimetry (photo-DSC). For each nanocomposite sample, heat of reaction and induction time were determined from exotherms and these datas were used to study the effects of reinforcing agents and coupling agents on curing kinetics of radiation curable nanocomposite coatings. Photo-DSC studies show that nanoparticles and coupling agent clearly affect coatings polymerization. In fact, zirconia nanoparticles tend to decrease polymerization. Alumina nanoparticles do not affect negatively curing coatings. Silane coupling agent affects positively the curing of acrylate coatings, although zirconate coupling agent tends to decrease it. 相似文献
12.
聚氨酯丙烯酸酯/环氧丙烯酸酯分散体系的制备 总被引:3,自引:0,他引:3
用水性聚氨酯丙烯酸酯改性环氧丙烯酸酯,制备了聚氨酯丙烯酸酯/环氧丙烯酸酯分散体系。随着分散体中聚氨酯丙烯酸酯浓度的增加,体系稳定性增加,当其浓度达到30%时,可制得稳定的分散体系。这种分散体系可作为一种紫外光固化水性涂料,其涂膜的耐磨性、柔韧性都比环氧丙烯酸酯涂膜增强,而硬度变化不大。 相似文献
13.
丙烯酸酯改性石油树脂防腐涂料 总被引:4,自引:0,他引:4
C9石油树脂具有价格低,耐水性、耐腐蚀性和耐候性好等特点,但其脆性大,成膜性差,不能单独用于制备防腐涂料。用丙烯酸丁酯改性C9石油树脂,可制得性能良好的防腐涂料。介绍了丙烯酸酯改性石油树脂防腐涂料的配方、制法及其性能指标。讨论了丙烯酸丁酯改性剂用量、溶剂、改性反应温度和时间的选择。 相似文献
14.
有机氟改性丙烯酸酯树脂研究新进展 总被引:1,自引:0,他引:1
综述了有机氟改性丙烯酸酯树脂的化学改性制备方法(如常规乳液聚合、核壳乳液聚合和无皂乳液聚合等)及其研究新进展,总结了有机氟改性丙烯酸酯树脂在外墙涂料、防腐防污涂料等领域的应用现状,并展望了该研究领域的发展前景。 相似文献
15.
In the present work boron acrylate monomer was synthesized by esterification reaction. UV-curable boron containing epoxy acrylate coatings were prepared and applied on plexiglass substrates to obtain thermally and mechanically stable coatings. The physical and mechanical properties of UV-cured coatings were investigated such as gel content, solvent resistance, hardness, flexibility and tensile tests. The thermal behavior of coatings was also evaluated. It was observed that the tensile properties and thermal stabilities of boron modified epoxy coatings mainly depend on the boron content. 相似文献
16.
乳液聚合法制备全氟碳涂料及性能的研究 总被引:2,自引:0,他引:2
以自制的全氟丙烯酸酯单体 ,经乳液聚合的全氟丙烯酸酯乳液共聚物配制的全氟碳乳液涂料 ,其耐水性、耐碱性等均优于传统的丙烯酸酯乳液涂料 相似文献
17.
18.
紫外光固化丙烯酸双与三环戊烯基酯涂层与其热性能研究 总被引:3,自引:0,他引:3
经过对丙烯酸双环戊烯基酯(DCPA)与新单体丙烯酸三环戊烯基酯(TCPA)涂层的紫外光固化、固化涂层的DSC分析及从其红外光谱计算得到的聚合物上残余双键的研究,并与丙烯酸异冰片酯(IBA)进行了比较,发现许多新鲜与重要的现象。酯基上含环戊烯双键的DCPA与TCPA,在空气中紫外光固化的速率,大大快于具有饱和酯基的IBA,显示酯基上环戊烯的烯丙位氢具有给氢与除去阻聚的氧的作用。TCPA在空气中紫外光固化速率大大快于DCPA,并且是无臭的。2光固化的PDCPA与PTCPA中存在残余的丙烯酸酯与环戊烯双键,但是光固化的PIBA中没有。双键的残余率,受所用光引发剂的类型与比率及光聚合的氛围影响。光固化的PDCPA与PTCPA可以是交联的。3光固化的PDCPA与PTCPA的DSC图有三个放热峰与一个吸热谷,但光固化的PIBA的DSC图没有放热峰。第一放热峰为所有残余丙烯酸酯双键与部分环戊烯双键聚合热所致。第二放热峰为环戊烯双键聚合热所致。第三放热峰为分解产物燃烧热所致。吸热谷是由于PDCPA与PTCPA分解吸热所致。因此在第一与第二放热峰温度范围内PDCPA与PTCPA进行了再次交联。4光固化的PDCPA的第? 相似文献
19.