Photocatalytic hydrogen evolution on graphene quantum dots anchored TiO2 nanotubes-array

The inversely structured TiO₂ nanotubes-array (TiO₂-NA) and CdS-modified TiO₂ nanotubes-array (CdS/TiO₂-NA) with graphene quantum dots (GQDs) anchored inside were prepared through a facile impregnation method. The catalysts were characterized by multiple techniques of SEM, TEM, XRD, Raman spectroscopy, XPS, TG and diffuse reflectance UV/Vis absorption spectroscopy. The results of TEM, XPS and Raman spectroscopy indicate that the GQDs were really formed and successfully anchored into the TiO₂-NA and CdS/TiO₂-NA. The activity evaluation results show that the hydrogen evolution rate during photocatalytic water splitting was greatly improved after loading GQDs into TiO₂-NA and CdS/TiO₂-NA. By breaking graphene into GQDs, the light-filtering effect of graphene was remarkably inhibited as compared with that of conventional large graphene sheets. Moreover, the overall morphology of TiO₂ nanotube array could be well maintained after anchoring GQDs inside, which is favorable to mass transfer. The catalyst design strategy proposed in present work can be extended to other photocatalytic systems.     

Controllable O2 oxidization graphene in TiO2/graphene composite and its effect on photocatalytic hydrogen evolution

TiO₂/reduced graphene oxide composite (T-rGO) was synthesized and its performance was evaluated with photocatalytic hydrogen evolution. It was found that the hydrogen evolution rate of T-rGO increased significantly after injecting small amount of air into the vacuum pumped and UV irradiated sealed reaction cell. The IR, XPS, Raman and ESR spectra analysis indicated that the O₂^•−, which generated from the reaction of photoinduced electrons and the injected O₂ can moderately and controllably increase the oxygen groups on graphene planar of T-rGO at ambient condition. The amount of oxygen groups on graphene planar of T-rGO will affect the p-doping concentration of graphene, thus affect the p–n junction and the performance of T-rGO for photocatalytic hydrogen evolution.     

The influence of the electrodeposition potential on the morphology of Cu2O/TiO2 nanotube arrays and their visible-light-driven photocatalytic activity for hydrogen evolution

The influence of the electrodeposition potential on the morphology of Cu₂O/TiO₂ nanotube arrays (Cu₂O/TNA) and their visible-light-driven photocatalytic activity for hydrogen evolution have been investigated for the first time in this work. The photocatalytic hydrogen evolution rate of the as-prepared Cu₂O/TNA at the deposition potential of −0.8 V was about 42.4 times that of the pure TNA under visible light irradiation. This work demonstrated a feasible and simple electrodeposition method to fabricate an effective and recyclable visible-light-driven photocatalyst for hydrogen evolution.     

Enhanced hydrogen generation from methanol aqueous solutions over Pt/MoO3/TiO2 under ultraviolet light

The photocatalytic activity in hydrogen production from methanol reforming can be significantly enhanced by Pt/MoO₃/TiO₂ photocatalysts. Compared with Pt/P25, the photocatalytic activity of optimized Pt/MoO₃/TiO₂ shows an evolution rate of 169 μmol/h/g of hydrogen, which is almost two times higher than that of Pt/P25. XRD and Raman spectra show that MoO₃ are formed on the surface of TiO₂. It is found that with the bulk MoO₃ just formed, the catalyst shows the highest activity due to a large amount of heterojunctions and the high crystallinity of MoO₃. The HRTEM image showed a close contact between MoO₃ and TiO₂. It is proposed that the Z-scheme type of heterojunction between MoO₃ and TiO₂ is responsible for the improved photocatalytic activity. The heterojunction structure of MoO₃/TiO₂ does not only promote the charge separation, but also separates the reaction sites, where the oxidation (mainly on MoO₃) and reduction (on TiO₂) reactions occurred.     

Fabrication of graphene/CaIn2O4 composites with enhanced photocatalytic activity from water under visible light irradiation

A series of graphene/CaIn₂O₄ composites were synthesized using a facile solvothermal method to improve the photocatalytic performance of CaIn₂O₄. The reduction of graphene oxide to graphene and the deposition of CaIn₂O₄ nanoparticles on the graphene sheets can be achieved simultaneously during the solvothermal process. The photocatalytic activities of as-prepared graphene/CaIn₂O₄ composites for hydrogen evolution from CH₃OH/H₂O solution were investigated under visible light irradiation. It was found that graphene exhibited an obvious influence on the photocatalytic activity of CaIn₂O₄. The graphene/CaIn₂O₄ composite reached a high H₂ evolution rate of 62.5 μmol h⁻¹ from CH₃OH/H₂O solution when the content of graphene was 1 wt%. Furthermore, the 1 wt% graphene/CaIn₂O₄ composite did not show deactivation for H₂ evolution for longer than 32 h. This work could provide a new insight into the fabrication of visible light driven photocatalysts with efficient and stable performance.     

A hydrothermal route for constructing reduced graphene oxide/TiO2 nanocomposites: Enhanced photocatalytic activity for hydrogen evolution

A series of reduced graphene oxide/TiO₂ (RGO/TiO₂) nanowire microsphere composites were synthesized with a facile one-step hydrothermal method using TiCl₃ and graphene oxide (GO) as the starting materials, during which the formation of TiO₂ and the reduction of GO occur simultaneously. The obtained nanocomposites were characterized with X-ray diffraction, field emission scanning electron microscope, transmission electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and ultraviolet–visible (UV–vis) diffuse reflectance spectroscopy, respectively. UV–vis absorption spectra showed that the absorption edges of TiO₂ were extended into visible light region with the addition of RGO. The photocatalytic activities of the samples with and without Pt as cocatalysts were evaluated by hydrogen evolution from water photo-splitting under UV–vis light illumination. Enhanced photocatalytic properties were observed for the as-prepared RGO/TiO₂ nanocomposites. The amount of hydrogen evolution from the optimized photocatalyst reached to 43.8 μmol h⁻¹, which was about 1.6 times as high as that of bare TiO₂. The results shown here indicate a convenient and applicable approach to further exploitation of high activity materials for photocatalytic water splitting applications.     

Photocatalytic hydrogen production from aqueous methanol solution with CuO/Al2O3/TiO2 nanocomposite

The photocatalytic hydrogen production from aqueous methanol solution was investigated with ZnO/TiO₂, SnO/TiO₂, CuO/TiO₂, Al₂O₃/TiO₂ and CuO/Al₂O₃/TiO₂ nanocomposites. A mechanical mixing method, followed by the solid-state reaction at elevated temperature, was used for the preparation of nanocomposite photocatalyst. Among these nanocomposite photocatalysts, the maximal photocatalytic hydrogen production was observed with CuO/Al₂O₃/TiO₂ nanocomposites. A variety of components of CuO/Al₂O₃/TiO₂ photocatalysts were tested for the enhancement of H₂ formation. The optimal component was 0.2 wt% CuO/0.3 wt% Al₂O₃/TiO₂. The activity exhibited approximately tenfold enhancement at the optimum loading, compared with that with pure P-25 TiO₂. Nano-sized TiO₂ photocatalytic hydrogen technology has great potential for low-cost, environmentally friendly solar-hydrogen production to support the future hydrogen economy.     

Carbon-incorporated TiO2 microspheres: Facile flame assisted hydrolysis of tetrabutyl orthotitanate and photocatalytic hydrogen production

We report a novel and facile energy-saving method to prepare microspherical carbon-incorporated titania powders by flame assisted hydrolysis of tetrabutyl orthotitanate. The as-prepared samples were fully characterized by XRD, SEM, XPS, UV-Vis absorption spectra and photocatalytic hydrogen production. Anatase TiO₂ can be obtained directly without any post heat treatment. The as-prepared TiO₂ is formed of microspheres with sizes in a range of 0.5∼2.0 μm. XPS measurement shows the presence of carbon species which come from the incomplete combustion of organic compounds. Enhanced photocatalytic hydrogen production rates were observed for the as-prepared samples. A maximum hydrogen production rate was 8.1 μmol h⁻¹, which was 1.8 times larger than that of Degussa P25. The improved photocatalytic activity is attributed to enhanced light absorption behavior, which is caused by carbon incorporation and microspherical structure. This work demonstrates a novel and efficient strategy to synthesize microspherical anatase TiO₂ photocatalyst without any special equipment or setup.     

Photocatalytic hydrogen production over CuO and TiO2 nanoparticles mixture

Cheap and efficient photocatalysts were fabricated by simply mixing TiO₂ nanoparticles (NPs) and CuO NPs. The two NPs combined with each other to form TiO₂/CuO mixture in an aqueous solution due to the opposite surface charge. The TiO₂/CuO mixture exhibited photocatalytic hydrogen production rate of up to 8.23 mmol h⁻¹ g⁻¹ under Xe lamp irradiation when the weight ratio of P25 to CuO was optimized to 10. Although the conduction band edge position of CuO NPs is more positive than normal hydrogen electrode, the TiO₂/CuO mixture exhibited good photocatalytic hydrogen production performance because of the inter-particle charge transfer between the two NPs. The detailed mechanism of the photocatalytic hydrogen production is discussed. This mixing method does not require a complicated chemical process and allows mass production of the photocatalysts.     

Enhanced photocatalytic hydrogen evolution from reduced graphene oxide-defect rich TiO2-x nanocomposites

Solar-driven photocatalytic hydrogen generation by splitting water molecules requires an efficient visible light active photocatalyst. This work reports an improved hydrogen evolution activity of visible light active TiO_2-x photocatalyst by introducing reduced graphene oxide via an eco-friendly and cost-effective hydrothermal method. This process facilitates graphene oxide reduction and incorporates intrinsic defects in TiO₂ lattice at a one-pot reaction process. The characteristic studies reveal that RGO/TiO_2-x nanocomposites were sufficiently durable and efficient for photocatalytic hydrogen generation under the visible light spectrum. The altered band gap of TiO_2-x rationally promotes the visible light absorption, and the RGO sheets present in the composites suppresses the electron-hole recombination, which accelerates the charge transfer. Hence, the noble metal-free RGO/TiO_2-x photocatalyst exhibited hydrogen production with a rate of 13.6 mmol h^?1g^?1_cat. under solar illumination. The appreciable photocatalytic hydrogen generation activity of 947.2 μmol h^?1g^?1_cat with 117 μAcm^?2 photocurrent density was observed under visible light (>450 nm).     

Remarkable promotion of photocatalytic hydrogen evolution from water on TiO2-pillared titanoniobate

TiO₂-pillared titanoniobate TiO₂/HTiNbO₅ as an efficient photocatalyst was prepared via an exfoliation–restacking route. The as-prepared nanohybrid is mesoporous with a high specific surface area of 171 m²/g and a gallery height of 1.55 nm. Under a 300 W Xe lamp irradiation, the nanohybrid exhibited a high photocatalytic activity of 219 μmol/h/(g cat) in splitting water into hydrogen, which is 12 times as high as its parent HTiNbO₅ (18 μmol/h/g) and 24 times as TiO₂ (9 μmol/h/g). Enlarged surface area and effective electronic coupling between the host and the guest components contribute to the high photocatalytic activity of TiO₂/HTiNbO₅. Its photocatalytic activity was further improved through platinizing, and 5 wt% Pt-loaded TiO₂/HTiNbO₅ gave a remarkable hydrogen evolution rate of 4735 μmol/h/g. A photoexcitation model of the semiconductor–semiconductor pillared photocatalyst was proposed based on the results of XPS and UV–vis.     

Enhancement of photocatalytic hydrogen production by liquid phase plasma irradiation on metal-loaded TiO2/carbon nanofiber photocatalysts

Enhanced hydrogen production by photocatalytic decomposition was assessed using liquid phase plasma over metal-loaded photocatalysts. Effects of irradiation of the liquid phase plasma were evaluated in the photocatalytic hydrogen production of hydrogen. Carbon nanofiber was introduced as photocatalytic support for the Ni-loaded TiO₂ photocatalyst. The influence of addition of organic reagents into water on hydrogen evolution was also evaluated. The photocatalytic decomposition by irradiation of the liquid phase plasma without photocatalyst produced some hydrogen evolution. The rate of hydrogen evolution was improved by the metal loading on the TiO₂ surface. The carbon nanofiber acted as a useful photocatalytic support for the fixation of TiO₂. Hydrogen evolution was enhanced by the Ni loading on the TiO₂ nanocrystallites supported on the carbon nanofiber support. Hydrogen evolution was increased significantly by the addition of organic reagents, which acted as a type of sacrificial reagent promoting photocatalysis.     

Facile fabrication of Bi2O3/TiO2-xNx nanocomposites for excellent visible light driven photocatalytic hydrogen evolution

Mesoporous Bi₂O₃/TiO_2−xN_x nanocomposites (BiNT) were synthesized by soft chemical template free homogeneous co-precipitation technique. XRD, XPS, TEM, UV-Vis DRS and photoluminescence studies were adapted to determine the structural, electronic and optical properties. The photocatalytic activities of the catalysts were evaluated for water splitting to generate clean hydrogen fuel under visible light irradiation (λ ≥ 400 nm). BiNT-400 catalyst showed highest results towards hydrogen production (198.4 μmol/h) with an apparent quantum efficiency of 4.3%. The pronounced activity of BiNT-400 sample towards hydrogen production was well consistent with high crystallinity, large surface area, proper excitation by N doping and Bi₂O₃ sensitization.     

Synthesis of reduced graphene oxide–TiO2 nanoparticle composite systems and its application in hydrogen production

The utilization of solar energy for the conversion of water to hydrogen and oxygen has been considered to be an efficient strategy to solve crisis of energy and environment. Here, we report the synthesis of reduced graphene oxide–TiO₂ nanoparticle composite system through the photocatalytic reduction of graphite oxide using TiO₂ nanoparticles. Photoelectrochemical characterizations and hydrogen evolution measurements of these nanocomposites reveal that the presence of graphene enhances the photocurrent density and hydrogen generation rate. The optimum photocurrent density and hydrogen generation rate has been found to be 3.4 mA cm⁻² and 127.5 μmole cm⁻²h⁻¹ in 0.5 M Na₂SO₄ electrolyte solution under 1.5AM solar irradiance of white light with illumination intensity of 100 mW cm⁻². In graphene–TiO₂ nanocomposite, photogenerated electrons in TiO₂ are scavenged by graphene sheets and percolate to counter electrode to reduce H⁺ to molecular hydrogen thus increasing the performance of water-splitting reaction.     

Investigation of the appropriate content of graphene in AgTiO2-graphene ternary nanocomposites applied as photocatalysts

AgTiO₂-graphene ternary nanocomposites with varying graphene contents were fabricated by photocatalytic reduction. SEM and TEM imaging of the nanocomposites showed that TiO₂ nanoparticles decorated with Ag nanoparticles covered graphene nanosheets. A higher content of graphene was shown to be favorable for dye photodegradation. The results of electrochemical analysis revealed that a higher graphene content contributed to increased conductivity and reduced interfacial impedance, which led to more efficient electron transport and thus higher photocatalytic activity. The highest efficiency in dye photodegradation and hydrogen production from water splitting was achieved when the ratio of TiO₂ to graphene in the nanocomposite was 5: 1. The corresponding mass-normalized hydrogen evolution rate and quantum efficiency were 129.5 μmol g^?1 h^?1 and 4.8%, respectively. A mechanism for photocatalysis was proposed and discussed. This study demonstrates that the AgTiO₂-graphene ternary nanocomposite could be a promising photocatalyst.     

Nanocomposite of graphene oxide with nitrogen-doped TiO2 exhibiting enhanced photocatalytic efficiency for hydrogen evolution

The application of hydrogen energy potentially addresses energy and environmental problems. In order to improve the photocatalytic efficiency, nanocomposite of N-doped TiO₂ with graphene oxide (NTG) is prepared and characterized with Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectra, X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), photoluminescent spectra. The application of NTG to hydrogen evolution exhibits high photocatalytic efficiency of 716.0 or 112.0 μmol h⁻¹ g⁻¹ under high-pressure Hg or Xenon lamp, which is about 9.2 or 13.6 times higher than P25 photocatalyst. This is mainly attributed to the N-doping of TiO₂ and the incorporation of graphene oxide resulting in narrow band gap, together with the synergistic effect of fast electron-transporting of photogenerated electrons and the efficient electron-collecting of graphene oxide retarding charge recombination. These results provide a significant theoretical foundation for the potential application of N-doping photocatalysts to hydrogen evolution.     

Significant improvement of photocatalytic hydrogen generation rate over TiO2 with deposited CuO

TiO₂ photocatalyst with deposited CuO (CuO-TiO₂) was synthesized by the impregnation method using P25 (Degussa) as support, and exhibited high photocatalytic hydrogen generation activity from methanol/water solution. A substantial hydrogen evolution rate of 10.2 ml min⁻¹ (18,500 μmol h⁻¹ g⁻¹_catalyst) was observed over this efficient CuO-TiO₂ with optimal Cu content of 9.1 mol% from an aqueous solution containing 10 vol% methanol; this improved hydrogen generation rate is significantly higher than the reported Cu-containing TiO₂, including some Pt and Pd loaded TiO₂. Optimal Cu content of 9.1 mol% provided maximum active sites and allowed good light penetration in TiO₂. Over this efficient CuO-TiO₂, the hydrogen generation rate was accelerated by increasing the methanol concentration according to Freundlich adsorption isotherm. However, the photocatalytic hydrogen generation rate was suppressed under long time irradiation mainly due to accumulation of by-products, reduction of CuO and copper leaching, which requires further investigation.     

Effect of liquid phase plasma on photocatalysis of water for hydrogen evolution

This study examined the effects of liquid phase plasma irradiation on the photocatalytic decomposition of water for hydrogen evolution. TiO₂ and metal-loaded TiO₂ nanocrystallites were introduced as photocatalysts. Na-Y zeolite was applied as a support for the TiO₂ nanocrystallites. The photocatalytic activities of the photocatalysts were estimated for hydrogen production from water. Hydrogen evolution appeared in the photodecomposition of water without photocatalysts. This was caused by the decomposition of water by plasma irradiation in water directly. The hydrogen evolution efficiency improved with increasing conductivity of water. The rate of hydrogen evolution was increased by the metal loading (Ni, Co, Fe) on the TiO₂ surface. Na-Y zeolite can be used as an efficient photocatalytic support for the fixation of TiO₂. The TiO₂ nanocrystallites were incorporated above 40 wt% on Na-Y support.     

Biomass-derived hierarchical porous CdS/M/TiO2 (M = Au,Ag, pt,pd) ternary heterojunctions for photocatalytic hydrogen evolution

We demonstrate a general method for the synthesis of biomass-derived hierarchical porous CdS/M/TiO₂ (M = Au, Ag, Pt, Pd) ternary heterojunctions for efficient photocatalytic hydrogen evolution. A typical biomass—wood are used as the raw sources while five species of wood (Fir, Ash, White Pine, Lauan and Shiraki) are chosen as templates for the synthesis of hierarchical porous TiO₂. The as-obtained products inherited the hierarchical porous features with pores ranging from micrometers to nanometers, with improved photocatalytic hydrogen evolution activity than non-templated counterparts. Noble metals M (M = Pt, Au, Ag, Pd) and CdS are loaded via a two-step photodeposition method to form core (metal)/shell (CdS) structures. The photocatalytic modules—CdS(shell)/metal (core)/TiO₂ heterostructures, have demonstrated to increase visible light harvesting significantly and to increase the photocatalytic hydrogen evolution activity. The H₂ evolution rates of CdS/Pd/TiO₂ ternary heterostructures are about 6.7 times of CdS/TiO₂ binary heterojunctions and 4 times higher than Pd/CdS/TiO₂ due to the vertical electron transfer process. The design of such system is beneficial for enhanced activity from morphology control and composition adjustment, which would provide some new pathways for the design of promising photocatalytic systems for enhanced performance.     

CuCr2O4/TiO2 heterojunction for photocatalytic H2 evolution under simulated sunlight irradiation

CuCr₂O₄/TiO₂ heterojunction has been successfully synthesized via a facile citric acid (CA)-assisted sol-gel method. Techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectrum (UV-vis DRS) have been employed to characterize the as-synthesized nanocomposites. Furthermore, photocatalytic activities of the as-obtained nanocomposites have been evaluated based on the H₂ evolution from oxalic acid solution under simulated sunlight irradiation. Factors such as CuCr₂O₄ to TiO₂ molar ratio in the composites, calcination temperature, photocatalyst mass concentration, and initial oxalic acid concentration affecting the photocatalytic hydrogen producing have been studied in detail. The results showed that the nanocomposite of CuCr₂O₄/TiO₂ is more efficient than their single part of CuCr₂O₄ or TiO₂ in producing hydrogen. The optimized composition of the nanocomposites has been found to be CuCr₂O₄·0.7TiO₂. And the optimized calcination temperature and photocatalyst mass concentration are 500 °C and 0.8 g l⁻¹, respectively. The influence of initial oxalic acid concentration is consistent with the Langmuir model.