共查询到20条相似文献,搜索用时 234 毫秒
1.
2.
3.
链式冷床是钢管生产中的常见设备,钢管在其上面通过断续横向滚动获得较好的冷却效果和直度效果。常见的链式冷床有单向链式冷床和双向链式冷床。综合了两种冷床的特点,简析了计算机仿真在链式冷床设计中的一些应用,通过拨爪受力的变化,确定冷床倾斜角,使其更好的实现了设计功能。 相似文献
4.
5.
就3 800 mm炉卷生产线冷床设计中的几个主要问题进行了探讨,确定了冷床的型式、上下料装置的型式及冷床的润滑方式,计算出了需要的冷床面积,并给出了建议的冷床尺寸。 相似文献
6.
7.
步进齿条式冷床具有冷却效率高、轧件冷却均匀等优点,且在冷床运输冷却的过程中对轧件具有矫直作用,是现代小型、中型、无缝钢管生产线普遍采用的冷床,轧件进入冷床时一般是高速,要求上冷床床体前要完全静止,在这短时间内轧件从高速至静止并安全上冷床,其中一个重要机构就是制动板。轧件在冷床输入端的制动是步进式齿条冷床的一个重点技术课题。 相似文献
8.
针对棒材步进式冷床本体,主传动电机功率计算与轧制工艺参数关系进行探讨,得出冷床的主电机的功率与轧件的线密度和轧件的速度关系;得出冷床主电机的功率与冷床宽度无关,仅与冷床的长度、轧件的线密度、轧件速度有关。此结论可以指导现有棒材车间轧件速度/规格增加时,调整冷床的传动控制。 相似文献
9.
通过对冷床裙板液压系统的改造,冷床装置相关环节的改进,根据现场使用的实践总结,以求能为冷床找到一个可靠性高、经济适用的设计方案。经检验,改造后明显降低了冷床裙板的故障率。 相似文献
10.
11.
12.
13.
介绍了年产100万t的某棒材中小型轧钢车间冷床的工艺尺寸计算和冷却能力的校核。对棒材在冷床上的冷却主要考虑热辐射,采用波尔茨曼公式计算棒材冷却所需时间,求出冷床长度,并将该时间与棒材在冷床上实际通过的时间进行比较,校核了冷床长度。 相似文献
14.
介绍了安钢第二轧钢厂3^#冷床的改造情况。通过改造,扩大了冷床面积,加快了精整区域的过钢速度,保证了双机架的正常生产。 相似文献
15.
260棒材机组冷床改造 总被引:1,自引:0,他引:1
通过对安阳钢铁集团公司小型厂 2 60机组冷床进行改造 ,解决了原上、下卸钢装置因技术落后而影响产品质量和产量的问题 ,冷床冷却能力大大提高 ,使整个机组生产水平和技术水平达到一个新的高度 相似文献
16.
17.
An empirical dynamic model of burn-through point(BTP)in sintering process was developed.The K-means clustering was used to feed distribution according to the cold bed permeability,which was estimated by the superficial gas velocity in the cold stage.For each clustering,a novel genetic programming(NGP)was proposed to construct the empirical model of the waste gas temperature and the bed pressure drop in the sintering stage.The least square method(LSM)and M-estimator were adopted in NGP to improve the ability... 相似文献
18.
19.
The paper presents an empirical dynamic model of burn-through point (BTP) in sintering process. The model combines two stages of sintering process, cold processing stage and sintering stage. Fist, cold bed permeability measured by Gas velocity is introduced in the cold stage. Then, K-Means clustering is applied to partition the feed according to the permeability. Besides, for each clustering, a novel genetic programming (NGP) is proposed to construct the empirical model of the waste gas temperature and pressure drop through the bed in sintering stage. NGP adopts least square method (LSM) and M-estimator to improve the ability to compute and resist disturbance. Therefore, the paper constructs a model base of burn-through point and the simulation proves that the model base has a good performance. 相似文献