Highly potent synthetic polyamides, bisdistamycins, and lexitropsins as inhibitors of human immunodeficiency virus type 1 integrase

Alignment of the available human immunodeficiency virus type 1 (HIV-1) viral DNA termini [U5 and U3 long terminal repeats (LTRs)] shows a high degree of conservation and the presence of a stretch of five or six consecutive adenine and thymine (AT) sequences approximately 10 nucleotides away from each LTR end. A series of AT-selective minor-groove binders, including distamycin and bisdistamycins, bisnetropsins, novel lexitropsins, and the classic monomeric DNA binders Hoechst 33258, 4'-diamino-2-phenylindole, pentamidine, berenil, spermine, and spermidine, were tested for their inhibitory activities against HIV-1 integrase (IN). Although netropsin, distamycin, and all other monomeric DNA binders showed weak activities in the range of 50-200 microM, some of the polyamides, bisdistamycins, and lexitropsins were remarkably active at nanomolar concentrations. Bisdistamycins were 200 times less potent when the conserved AAAAT stretch present in the U5 LTR was replaced with GGGGG, consistent with the preferred binding of these drugs to AT sequences. DNase I footprinting of the U5 LTR further demonstrated the selectivity of these bisdistamycins for the conserved AT sequence. The tested compounds were more potent in Mg+2 than in Mn+2 and inhibited IN50-212 deletion mutant in disintegration assays and the formation of IN/DNA complexes. The lexitropsins also were active against HIV-2 IN. Some of the synthetic polyamides exhibited significant antiviral activity. Taken together, these data suggest that selective targeting of the U5 and U3 ends of the HIV-1 LTRs can inhibit IN function. Polyamides might represent new leads for the development of antiviral agents against acquired immune deficiency syndrome.     

In vitro anti-human immunodeficiency virus (HIV) activities of transition state mimetic HIV protease inhibitors containing allophenylnorstatine

Transition state mimetic tripeptide human immunodeficiency virus (HIV) protease inhibitors containing allophenylnorstatine [(2S,3S)-3-amino-2-hydroxy-4-phenylbutyric acid] were synthesized and tested for activity against HIV in vitro. Two compounds, KNI-227 and KNI-272, which were highly potent against HIV protease with little inhibition of other aspartic proteases, showed the most potent activity against the infectivity and cytopathic effect of a wide spectrum of HIV strains. As tested in target CD4+ ATH8 cells, the 50% inhibitory concentrations of KNI-227 against HIV type 1 LAI (HIV-1LAI), HIV-1RF, HIV-1MN, and HIV-2ROD were 0.1, 0.02, 0.03, and 0.1 microM, respectively, while those of KNI-272 were 0.1, 0.02, 0.04, and 0.1 microM, respectively. Both agents completely blocked the replication of 3'-azido-2',3'-dideoxythymidine-sensitive and -insensitive clinical HIV-1 isolates at 0.08 microM as tested in target phytohemagglutinin-activated peripheral blood mononuclear cells. The ratios of 50% cytotoxic concentrations to 50% inhibitory concentrations for KNI-227 and KNI-272 were approximately 2,500 and > 4,000, respectively, as assessed in peripheral blood mononuclear cells. Both compounds blocked the posttranslational cleavage of the p55 precursor protein to generate the mature p24 Gag protein in stably HIV-1-infected cells. The n-octanol-water partition coefficients of KNI-227 and KNI-272 were high, with log Po/w values of 3.79 and 3.56, respectively. Degradation of KNI-227 and KNI-272 in the presence of pepsin (1 mg/ml, pH 2.2) at 37 degrees C for 24 h was negligible. Current data warrant further careful investigations toward possible clinical application of these two novel compounds.     

Antiviral properties of aminodiol inhibitors against human immunodeficiency virus and protease

A series of aminodiol inhibitors of human immunodeficiency virus type 1 (HIV-1) protease were identified by using an in vitro peptide cleavage assay. BMS 182,193, BMS 186,318, and BMS 187,071 protected cells against HIV-1, HIV-2, and simian immunodeficiency virus infections, with 50% effective doses ranging from 0.05 to 0.33 microM, while having no inhibitory effect on cells infected with unrelated viruses. These compounds were also effective in inhibiting p24 production in peripheral blood mononuclear cells infected with HIV-1 IIIB and against the zidovudine-resistant HIV-1 strain A018C. Time-of-addition studies indicated that BMS 182,193 could be added as late as 27 h after infection and still retain its antiviral activity. To directly show that the activity of these compounds in culture was due to inhibition of proteolytic cleavage, the levels of HIV-1 gag processing in chronically infected cells were monitored by Western blot (immunoblot) analysis. All compounds blocked the processing of p55 in a dose-dependent manner, with 50% effective doses of 0.4 to 2.4 microM. To examine the reversibility of BMS 186,318, chronically infected CEM-SS cells were treated with drug and virions purified from the culture medium. Incubation of HIV-1 particles in drug-free medium indicated that inhibition of p55 proteolysis was slowly reversible. The potent inhibition of HIV-1 during both acute and chronic infections indicates that these aminodiol compounds are effective anti-HIV-1 compounds.     

Identification of the catalytic and DNA-binding region of the human immunodeficiency virus type I integrase protein

The integrase (IN) protein of the human immunodeficiency virus (HIV) is required for specific cleavage of the viral DNA termini, and subsequent integration of the viral DNA into target DNA. To identify the various domains of the IN protein we generated a series of IN deletion mutants as fusions to maltose-binding protein (MBP). The deletion mutants were tested for their ability to bind DNA, to mediate site-specific cleavage of the viral DNA ends, and to carry out integration and disintegration reactions. We found that the DNA-binding region resides between amino acids 200 and 270 of the 288-residues HIV-1 IN protein. The catalytic domain of the protein was mapped between amino acids 50 and 194. For the specific activities of IN, cleavage of the viral DNA and integration, both the DNA-binding domain and the conserved amino-terminal region of IN are required. These regions are dispensable however, for disintegration activity.     

Inhibitors of human immunodeficiency virus integrase

In an effort to further extend the number of targets for development of antiretroviral agents, we have used an in vitro integrase assay to investigate a variety of chemicals, including topoisomerase inhibitors, antimalarial agents, DNA binders, naphthoquinones, the flavone quercetin, and caffeic acid phenethyl ester as potential human immunodeficiency virus type 1 integrase inhibitors. Our results show that although several topoisomerase inhibitors--including doxorubicin, mitoxantrone, ellipticines, and quercetin--are potent integrase inhibitors, other topoisomerase inhibitors--such as amsacrine, etoposide, teniposide, and camptothecin--are inactive. Other intercalators, such as chloroquine and the bifunctional intercalator ditercalinium, are also active. However, DNA binding does not correlate closely with integrase inhibition. The intercalator 9-aminoacridine and the polyamine DNA minor-groove binders spermine, spermidine, and distamycin have no effect, whereas the non-DNA binders primaquine, 5,8-dihydroxy-1,4-naphthoquinone, and caffeic acid phenethyl ester inhibit the integrase. Caffeic acid phenethyl ester was the only compound that inhibited the integration step to a substantially greater degree than the initial cleavage step of the enzyme. A model of 5,8-dihydroxy-1,4-naphthoquinone interaction with the zinc finger region of the retroviral integrase protein is proposed.     

Monoclonal antibodies against human immunodeficiency virus type 1 integrase: epitope mapping and differential effects on integrase activities in vitro

Human immunodeficiency virus type 1 (HIV-1) integrase (IN) catalyzes the integration of viral DNA into the host chromosome, an essential step in retroviral replication. As a tool to study the structure and function of this enzyme, monoclonal antibodies (MAbs) against HIV-1 IN were produced. Epitope mapping demonstrated that the 17 MAbs obtained could be divided into seven different groups, and the selection of MAbs representing these groups were tested for their effect on in vitro activities of IN. Four groups of MAbs recognized epitopes within the region of amino acids (aa) 1 to 16, 17 to 38, or 42 to 55 in and around the conserved HHCC motif near the N terminus of IN. MAbs binding to these epitopes inhibited end processing and DNA joining and either stimulated or had little effect on disintegration and reintegration activities of IN. Two MAbs binding to epitopes within the region of aa 56 to 102 in the central core or aa 186 to 250 in the C-terminal half of the protein showed only minor effects on the in vitro activities of IN. Three Mabs which recognized on epitope within the region of aa262 to 271 of HIV-1 IN cross-reacted with HIV-2 IN. MAbs binding to this epitope clearly inhibited end processing and DNA joining and stimulated or had little effect on disintegration. In contrast to the N-terminal-specific MAbs, these C-terminal-specific MAbs abolished reintegration activity of IN.     

Quantitative in vitro assay for human immunodeficiency virus deoxyribonucleic acid integration

An obligatory step of retroviral growth is the integration of a DNA copy of the viral RNA into the genomic DNA of the host. Recombinant human immunodeficiency virus type I (HIV-1) integrase (IN) expressed in Escherichia coli efficiently catalyzes the overall in vitro integration reaction, namely, the processing of the long terminal repeat (LTR) ends and the strand transfer reaction. Using the 3' end of synthetic oligonucleotides which match the termini of HIV-1 LTRs as substrate and supercoiled pSP65 DNA as the target, we describe an assay that is suitable for the enzymatic analysis of the integration and for testing candidate inhibitors of HIV IN protein.     

Mutational scan of the human immunodeficiency virus type 2 integrase protein

Retroviral integrase (IN) cleaves linear viral DNA specifically near the ends of the DNA (cleavage reaction) and subsequently couples the processed ends to phosphates in the target DNA (integration reaction). In vitro, IN catalyzes the disintegration reaction, which is the reverse of the integration reaction. Ideally, we would like to test the role of each amino acid in the IN protein. We mutagenized human immunodeficiency virus type 2 IN in a random way using PCR mutagenesis and generated a set of mutants in which 35% of all residues were substituted. Mutant proteins were tested for in vitro activity, e.g., site-specific cleavage of viral DNA, integration, and disintegration. Changes in 61 of the 90 proteins investigated showed no phenotypic effect. Substitutions that changed the choice of nucleophile in the cleavage reaction were found. These clustered around the active-site residues Asp-116 and Glu-152. We also found alterations of amino acids that affected cleavage and integration differentially. In addition, we analyzed the disintegration activity of the proteins and found substitutions of amino acids close to the dimer interface that enhanced intermolecular disintegration activity, whereas other catalytic activities were present at wild-type levels. This study shows the feasibility of investigating the role of virtually any amino acid in a protein the size of IN.     

The catalytic domain of human immunodeficiency virus integrase: ordered active site in the F185H mutant

We solved the structure and traced the complete active site of the catalytic domain of the human immunodeficiency virus type 1 integrase (HIV-1 IN) with the F185H mutation. The only previously available crystal structure, the F185K mutant of this domain, lacks one of the catalytically important residues, E152, located in a stretch of 12 disordered residues [Dyda et al. (1994) Science 266, 1981-1986]. It is clear, however, that the active site of HIV-1 IN observed in either structure cannot correspond to that of the functional enzyme, since the cluster of three conserved carboxylic acids does not create a proper metal-binding site. The conformation of the loop was compared with two different conformations found in the catalytic domain of the related avian sarcoma virus integrase [Bujacz et al. (1995) J. Mol. Biol. 253, 333-346]. Flexibility of the active site region of integrases may be required in order for the enzyme to assume a functional conformation in the presence of substrate and/or cofactors.     

The inhibition of human immunodeficiency virus proteases by 'interface peptides'

The active human immunodeficiency virus type 1 (HIV-1) protease has a homodimeric structure, the subunits are connected by an 'interface' beta-sheet formed by the NH2- and COOH-terminal amino acid segments. Short peptides derived from these segments are able to inhibit the protease activity in the range of micromolar IC50 values. We have further improved the inhibitory power of such peptides by computer modelling. The best inhibitor, the palmitoyl-blocked peptide Pam-Thr-Val-Ser-Tyr-Glu-Leu, has an IC50 value of less than 1 microM. Some of the peptides also showed very good inhibition of the HIV-2 protease. The C-terminal segment of the HIV-1 matrix protein, Acetyl-Gln-Val-Ser-Gln-Asn-Tyr, also inhibits HIV-1 protease. Kinetic studies confirmed the 'dissociative' mechanism of inhibition by the peptides. Depending on the peptide structure and ionic strength, both dimerization inhibition and competitive inhibition were observed, as well as synergistic effects between competitive inhibitors and interface peptides.     

Effects of mutations in residues near the active site of human immunodeficiency virus type 1 integrase on specific enzyme-substrate interactions

The phylogenetically conserved catalytic core domain of human immunodeficiency virus type 1 (HIV-1) integrase contains elements necessary for specific recognition of viral and target DNA features. In order to identify specific amino acids that determine substrate specificity, we mutagenized phylogenetically conserved residues that were located in close proximity to the active-site residues in the crystal structure of the isolated catalytic core domain of HIV-1 integrase. Residues composing the phylogenetically conserved DD(35)E active-site motif were also mutagenized. Purified mutant proteins were evaluated for their ability to recognize the phylogenetically conserved CA/TG base pairs near the viral DNA ends and the unpaired dinucleotide at the 5' end of the viral DNA, using disintegration substrates. Our findings suggest that specificity for the conserved A/T base pair depends on the active-site residue E152. The phenotype of IN(Q148L) suggested that Q148 may be involved in interactions with the 5' dinucleotide of the viral DNA end. The activities of some of the proteins with mutations in residues in close proximity to the active-site aspartic and glutamic acids were salt sensitive, suggesting that these mutations disrupted interactions with DNA.     

Zinc stimulates Mg2+-dependent 3'-processing activity of human immunodeficiency virus type 1 integrase in vitro

Human immunodeficiency virus type 1 integrase (HIV-1 IN) catalyzes both 3'-donor processing and strand transfer reactions. Previous studies have determined that the N-terminal region, a putative zinc finger, is capable of binding Zn2+. The function of zinc coordination to this domain, however, is still unknown. In this report, we present evidence that Mg2+-dependent 3'-donor processing by HIV-1 IN is enhanced by the addition of Zn2+ in vitro. This activity is inhibited in the presence of the chelator 1,10-phenanthroline (OP). In addition, the Mg2+-dependent 3'-donor processing activity is more sensitive to the concentration of IN than is the Mn2+-dependent activity. A combination of dimethyl sulfoxide (DMSO) and poly(ethylene glycol) (PEG) was found to further activate the Mg2+-dependent 3'-donor processing activity while diminishing the Mn2+-dependent activity. These results suggest factors such as substrate-length, concentration of IN, Zn2+ coordination, and protein-protein interactions are important for efficient and specific donor processing activity with Mg2+ in vitro.     

Differential divalent cation requirements uncouple the assembly and catalytic reactions of human immunodeficiency virus type 1 integrase

Previous in vitro analyses have shown that the human immunodeficiency virus type 1 (HIV-1) integrase uses either manganese or magnesium to assemble as a stable complex on the donor substrate and to catalyze strand transfer. We now demonstrate that subsequent to assembly, catalysis of both 3' end processing and strand transfer requires a divalent cation cofactor and that the divalent cation requirements for assembly and catalysis can be functionally distinguished based on the ability to utilize calcium and cobalt, respectively. The different divalent cation requirements manifest by these processes are exploited to uncouple assembly and catalysis, thus staging the reaction. Staged 3' end processing and strand transfer assays are then used in conjunction with exonuclease III protection analysis to investigate the effects of integrase inhibitors on each step in the reaction. Analysis of a series of related inhibitors demonstrates that these types of compounds affect assembly and not either catalytic process, therefore reconciling the apparent disparate results obtained for such inhibitors in assays using isolated preintegration complexes. These studies provide evidence for a distinct role of the divalent cation cofactor in assembly and catalysis and have implications for both the identification and characterization of integrase inhibitors.