Influence of Post-Treatment with 75% (v/v) Ethanol Vapor on the Properties of SF/P(LLA-CL) Nanofibrous Scaffolds

In order to improve the water-resistant ability of silk fibroin (SF) and SF/P(LLA-CL) blended nanofibrous scaffolds for tissue engineering applications, 75% (v/v) ethanol vapor was used to post-treat electrospun nanofibers. SEM indicated that the treated SF and SF/P(LLA-CL) nanofibrous scaffolds maintained a nanofibrous structure and possessed good water-resistant ability. Characterization of (13)C CP-MAS NMR clarified that 75% (v/v) ethanol vapor could induce SF conformation from random coil or α-helix to β-sheet. Although the water contact showed that treated SF/P(LLA-CL) blended nanofibrous scaffolds were hydrophobic, the water uptake demonstrated that their hydrophilicity was greatly superior to those of pure P(LLA-CL) nanofibrous scaffolds. Furthermore, the treated SF/P(LLA-CL) nanofibrous scaffolds, both in dry state and wet state, could retain good mechanical properties. Therefore, 75% (v/v) ethanol vapor treatment might be an ideal method to treat SF and SF/P(LLA-CL) nanofibrous scaffolds for biomedical applications.     

Study on the properties of the electrospun silk fibroin/gelatin blend nanofibers for scaffolds

Silk fibroin (SF)/gelatin blend nanofibers membranes as scaffolds were fabricated successfully via electrospinning with different composition ratios in formic acid. The formation of intermolecular hydrogen bonds and the conformational transition of SF provided scaffolds with excellent mechanical properties. FTIR and DTA analysis showed the SF/gelatin nanofibers had more β‐sheet structures than the pure SF nanofibers. The former's breaking tenacity increased from 0.95 up to 1.60 MPa, strain at break was 7.6%, average fiber diameter was 89.2 nm, porosity was 87%, and pore diameter was 142 nm. MTT, H&E stain, and SEM results showed that the adhesion, spreading, and proliferation of human umbilic vein endothelium cells (HUVECs) and mouse fibroblasts on the SF/gelatin nanofibers scaffolds were definitely better than that on the SF nanofibers scaffolds. The scaffolds could replace the natural ECM proteins, support long‐term cell growth, form three‐dimensional networks of the nanofibrous structure, and grow in the direction of fiber orientation. Our results prove that the addition of gelatin improved the mechanical and biological properties of the pure SF nanofibers, these SF/gelatin blend nanofiber membranes are desirable for the scaffolds and may be a good candidate for blood vessel engineering scaffolds. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Biodegradable nanofibrous membrane of zein/silk fibroin by electrospinning

BACKGROUND: Electrospinning of natural polymers offers a promising approach to generate nanofibers with a similar fibrillar structure to that of native extracellular matrix. In the present work, zein/silk fibroin (SF) blends were electrospun with formic acid as solvent to fabricate bicomponent nanofibrous scaffolds for biomedical applications. RESULTS: The zein/SF electrospun nanofibers had a smaller diameter and narrower diameter distribution than pure zein nanofibers, and the average diameter gradually decreased from 265 to 230 nm with increasing SF content in the blend. The predominant presence of α‐helix zein structure and random coil form of silk I in blend fibrous membranes was confirmed from Fourier transform infrared spectral and wide‐angle X‐ray diffraction data, while conversion to the β‐sheet structure of SF was also detected. The tensile strength of the zein/SF fibrous membranes was improved as the content of SF in the blend fibers increased. A preliminary study of in vitro degradation and cytotoxicity evaluated by MTT assay indicated that biodegradable zein/SF fibrous membranes did not induce cytotoxic effects in an L929 mouse fibroblast system. CONCLUSION: Biodegradable zein/SF fibrous membranes with good mechanical properties and cytocompatibility combine the beneficial characteristics of the individual components and may be useful for biomedical applications. Copyright © 2009 Society of Chemical Industry     

Supercritical carbon dioxide assisted fabrication of biomimetic sodium alginate/silk fibroin nanofibrous scaffolds

In this study, biomimetic sodium alginate (SA)/silk fibroin (SF) scaffolds were successfully fabricated by supercritical CO₂ technology. The SA/SF scaffolds exhibited an interconnected porous and extracellular matrix (ECM)-like nanofibrous structures. Moreover, the SA microparticles were embedded in the SF scaffolds. Increasing the content of SA microparticles could improve tensile strength and compressive strength of the SF scaffolds and reduce the porosity of the SF scaffolds. The addition of the SA microparticles could also regulate the degradation rate of the SA/SF scaffolds. Furthermore, the results of in vitro biocompatibility evaluation, indicated that the SA/SF scaffolds exhibited no obvious cytotoxicity and higher cell adhesion ability and were more favorable for L929 fibroblasts proliferation than pure SF scaffolds. Therefore, the SA/SF scaffolds with ECM-like nanofibrous and interconnected porous structure have potential application in skin tissue engineering.     

Fabrication and characterization of electrospun fibrous nanocomposite scaffolds based on poly(lactide‐co‐glycolide)/poly(vinyl alcohol) blends

Tissue engineering involves the fabrication of three‐dimensional scaffolds to support cellular in‐growth and proliferation. Ideally, the scaffolds should be similar to the native extracellular matrix (ECM). Electrospun polymer nanofibrous scaffolds are appropriate candidates for ECM mimetic materials since they mimic the nanoscale properties of ECM. Electrospun polymer nanocomposites based on poly(lactide‐co‐glycolide) (PLGA)/poly(vinyl alcohol) (PVA) and organically modified montmorillonite (OMMT) were prepared by a solution intercalation technique followed by electrospinning. The morphology of fibrous scaffolds based on these nanocomposites was investigated using scanning electron microscopy. The scaffolds showed highly porous structure within the nanofibres of diameters ranging from 400 to 700 nm. X‐ray diffractometry gave evidence of good dispersion of the OMMT in the blends with exfoliated morphology. Measurements of the water uptake and water contact angle of the fibrous scaffolds indicated significant improvement in the hydrophilicity of the scaffolds. Evaluations of the mechanical properties and unrestricted somatic stem cell culture of the electrospun fibrous nanocomposite scaffolds revealed that the PLGA90/PVA10/1.5% OMMT and PLGA90/PVA10/3% OMMT samples are the most useful from the tissue engineering application viewpoint. Copyright © 2010 Society of Chemical Industry     

Preparation and characterization of polyhydroxybutyrate‐co‐hydroxyvalerate/silk fibroin nanofibrous scaffolds for skin tissue engineering

Nanofibrous scaffolds were obtained by co‐electrospinning poly (3‐hydroxybuty‐rate‐co‐3‐hydroxyvalerate) (PHBV) and fibroin regenerated from silk in different proportions using 1,1,1,3,3,3‐hexafluoro‐2‐isopropanol (HFIP) as solvent. Field emission scanning electron microscope (FESEM) investigation showed that the fiber diameters of the nanofibrous scaffolds ranged from 190 to 460 nm. X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy analysis (FT‐IR) showed that the main structure of silk fibroin (SF) in the nanofibrous scaffold was β‐sheet. Compared to the PHBV nanofibrous scaffold, the surface hydrophilicity and water‐uptake capability of the PHBV/SF nanofibrous scaffold with 50/50 were improved. The results of cell adhesion experiment showed that the fibroblasts adhered more to the PHBV/SF nanofibrous scaffold with 50/50 than the pure PHBV nanofibrous scaffold. The proliferation of fibroblast on the PHBV/SF nanofibrous scaffold with 50/50 was higher than that on the pure PHBV nanofibrous scaffold. Our results indicated that the PHBV/SF nanofibrous scaffold with 50/50 may be a better candidate for biomedical applications such as skin tissue engineering and wound dressing. POLYM. ENG. SCI., 55:907–916, 2015. © 2014 Society of Plastics Engineers     

Fabrication of a Nanofibrous Scaffold for the In Vitro Culture of Cardiac Progenitor Cells for Myocardial Regeneration

In this study, random Poly (?-caprolactone) (PCL):Poly glycolic acid (PGA) nanofibrous scaffold with various PCL:PGA compositions were fabricated by electrospinning method. The nanofibrous scaffolds were characterized by SEM, contact angle measurement, ATR-FTIR, and tensile measurements. The results showed that with the increase of the concentration of PGA in spinning blend solution, the average diameter of nanofibers, hydrophilicity, and mechanical properties of the nanofibrous scaffolds increased. An in vitro degradation study of PCL:PGA nanofibers were conducted in phosphate-buffered saline, pH 7.2. The experiments confirm that increasing of PGA provides faster degradation rate in blended nanofibers. To assay the biocompatibility and cell behavior on the nanofibrous scaffolds, cell attachment and spreading of cardiac progenitor cells seeded on the scaffolds were studied. The results indicate that among electrospun nanofibrous scaffolds, the most appropriate candidate for myocardial tissue engineering scaffolds is PCL:PGA (65:35).     

Characterization and cell response of electrospun Rana chensinensis skin collagen/poly(l‐lactide) scaffolds with different fiber orientations

Collagen was extracted from Rana chensinensis skin supplied from byproducts via an acid enzymatic extraction method. The R. chensinensis skin collagen (RCSC) and poly(l ‐lactide) (PLLA) were blended at a 3:7 ratio in 1,1,1,3,3,3‐hexafluoroisopropanol (HFIP) at a concentration of 10% (g/mL) and electrospun to produce nanofibers in an aligned and random orientation. For comparison, pure PLLA nanofibrous membranes with aligned and random nanofiber orientations were also produced. The secondary structure of the RCSC nanofibers was investigated by circular dichroism to confirm that the extracted substance was collagen. The presence of collagen in the blend nanofiber was verified by LSCM. The blended nanofibers showed uniform, smooth, and bead‐free morphologies and presented a smaller fiber diameter (278 and and 259 nm) than the pure the ones of PLLA (559 and and 439 nm) nanofibers. It was found that the addition of RCSC and the modification of the nanofiber's orientation affected the fiber's diameter and the crystallization of PLLA. The cell viability studies with human fibroblast cells demonstrated that the RCSC/PLLA nanofibrous membranes formed by electrospinning exhibited good biocompatibility and that the aligned scaffolds could regulate the cell morphology by inducing cell orientation. The empirical results in this study indicated that the aligned RCSC/PLLA nanofibrous membrane is a potential wound dressing candidate for skin regeneration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45109.     

Nanofibrous scaffold prepared by electrospinning of poly(vinyl alcohol)/gelatin aqueous solutions

A series of nanofibrous scaffolds were prepared by electrospinning of poly(vinyl alcohol) (PVA)/gelatin aqueous solution. PVA and gelatin was dissolved in pure water and blended in full range, then being electrospun to prepared nanofibers, followed by being crosslinked with glutaraldehyde vapor and heat treatment to form nanofibrous scaffold. Field emission scanning electron microscope (FESEM) images of the nanofibers manifested that the fiber average diameters decreased from 290 to 90 nm with the increasing of gelatin. In vitro degradation rates of the nanofibers were also correlated with the composition and physical properties of electrospinning solutions. Cytocompatibility of the scaffolds was evaluated by cells morphology and MTT assay. The FESEM images revealed that NIH 3T3 fibroblasts spread and elongated actively on the scaffolds with spindle‐like and star‐type shape. The results of cell attachment and proliferation on the nanofibrous scaffolds suggested that the cytotoxicity of all samples are grade 1 or grade 0, indicating that the material had sound biosafety as biomaterials. Compared with pure PVA and gelatin scaffolds, the hybrid ones possess improved biocompatibility and controllability. These results indicate that the PVA/gelatin nanofibrous have potential as skin scaffolds or wound dressing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A fundamental study of chitosan/PEO electrospinning

A highly deacetylated (97.5%) chitosan in 50% acetic acid was electrospun at moderate temperatures (25-70 °C) in the presence of a low content of polyethylene oxide (10 wt% PEO) to beadless nanofibers of 60-80 nm in diameter. A systematic quantitative analysis of the solution properties such as surface tension, conductivity, viscosity and acid concentration was conducted in order to shed light on the electrospinnability of this polysaccharide. Rheological properties of chitosan and PEO solutions were studied in order to explain how PEO improves the electrospinnability of chitosan. Positive charges on the chitosan molecule and its chain stiffness were considered as the main limiting factors for electrospinability of neat chitosan as compared to PEO, since surface tension and viscosity of the respective solutions were similar. Various blends of chitosan and PEO solutions with different component ratios were prepared (for 4 wt% total polymer content). A significant positive deviation from the additivity rule in the zero shear viscosity of chitosan/PEO blends was observed and believed to be a proof for strong hydrogen bonding between chitosan and PEO chains, making their blends electrospinnable. The impact of temperature and blend composition on the morphology and diameter of electrospun fibers was also investigated. Electrospinning at moderate temperatures (40-70 °C) helped to obtain beadless nanofibers with higher chitosan content. Additionally, it was found that higher chitosan content in the precursor blends led to thinner nanofibers. Increasing chitosan/PEO ratio from 50/50 to 90/10 led to a diameter reduction from 123 to 63 nm. Producing defect free nanofibrous mats from the electrospinning process and with high chitosan content is particularly promising for antibacterial film packaging and filtration applications.     

Effect of chitosan on morphology and conformation of electrospun silk fibroin nanofibers

The electrospinning of silk fibroin(SF)/chitosan(CS) blends with different composition ratios was performed with formic acid as a spinning solvent. The SF/CS blends containing up to the CS content of 30% could be electrospun into the continuous fibrous structure, although pure CS was not able to be electrospun into the fibrous structure. As-spun SF/CS blend nanofibers showed smaller diameter and narrower diameter distribution than pure SF nanofibers, and the diameter gradually decreased from 450 to 130 nm with the addition of CS in blends. However, at the blend compositions with above 40 wt% chitosan, the continuous SF nanofibers containing CS beads were produced. We also investigated the influence of the methanol treatment on the secondary structure of as-spun SF or SF/CS blend nanofibers by means of ATR-IR and solid-state CP-MAS ¹³C-NMR. Comparing with the pure SF nanofibers, the conformational change of the as-spun SF/CS blend nanofibers into β-sheet was faster because the CS with rigid backbone synergistically might promote the conformational transition of SF by an intermolecular interaction.     

Green electrospun nanocuprous oxide–poly(ethylene oxide)–silk fibroin composite nanofibrous scaffolds for antibacterial dressings

Cuprous oxide (Cu₂O) nanoparticles have attracted extensive attention because of their excellent optical, catalytic, antibacterial, and antifungal properties and low cost. Nano-Cu₂O–poly(ethylene oxide) (PEO)–silk fibroin (SF) composite nanofibrous scaffolds (CNSs) were fabricated through green electrospinning to impart excellent antibacterial properties onto nanofibrous scaffolds. Scanning electron microscopy revealed that the nanofibers became more nonuniform and appeared more and more as beads in the nanofibers with increasing nano-Cu₂O concentration, and no obvious morphological changes were observed after 75% EtOH vapor treatment. Transmission electron microscopy and X-ray photoelectron spectroscopy demonstrated that nano-cuprous oxide (nano-Cu₂O) was successfully loaded into the PEO–SF nanofibers. Fourier transform infrared–attenuated total reflectance spectroscopy results indicate that nano-Cu₂O did not induce SF conformation from random coils to β sheets. The SF conformation converted from random coils to β sheets after 75% EtOH vapor treatment. The results of water contact angle testing and swelling property measurement clarified that nano-Cu₂O–PEO–SF CNSs possessed outstanding hydrophilicity. Nano-Cu₂O–PEO–SF CNSs exhibited better antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria than PEO–SF nanofibrous scaffolds, and the antibacterial activity increased with increasing nano-Cu₂O concentration. Cell viability studies with pig iliac endothelial cells demonstrated that nano-Cu₂O–PEO–SF CNSs had no cytotoxicity. Nano-Cu₂O–PEO–SF CNSs are expected to be ideal biomimetic antibacterial dressings for wound healing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47730.     

Interaction of human smooth muscle cells on random and aligned nanofibrous scaffolds of PHBV and PHBV-gelatin

Tissue-engineered scaffolds with nanofibrous morphology have been shown to be effective in regeneration of tissues because nanofibers mimic the native architecture of the extracellular matrix. The unique alignment in the native tissue motivated the authors to fabricate aligned nanofibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and PHBV-gelatin. The in vitro potential of the scaffolds was evaluated using human smooth muscle cells. MTS study confirmed that PHBV aligned nanofibrous scaffold promotes better cell proliferation as well as gene expression of key contractile and extracellular matrix markers than their PHBV-gelatin counterparts. Hence, the PHBV aligned nanofibers can be used as a biomimetic scaffold for the regeneration of esophagus. Electrospinning system for aligned nanofibers fabrication (A) and interaction of human smooth muscle cells on aligned nanofibers (B).     

Investigating the effect of PGA on physical and mechanical properties of electrospun PCL/PGA blend nanofibers

In the field of tissue engineering there is always a need for new engineered polymeric biomaterials which have ideal properties and functional customization. Unfortunately the demands for many biomedical applications need a set of properties that no polymers can fulfill. One method to satisfy these demands and providing desirable new biomaterials is by mixing two or more polymers. In this work, random nanofibrous blends of poly (ε‐caprolactone) (PCL) and polyglycolic acid (PGA) with various PCL/PGA compositions (100/0, 80/20, 65/35, 50/50, and 0/100) were fabricated by electrospinning method and characterized for soft‐tissue engineering applications. Physical, chemical, thermal, and mechanical properties of PCL/PGA blend nanofibers were measured by scanning electron microscopy (SEM), porosimetry, contact angle measurement, water uptake, attenuated total reflectance Fourier transform‐infrared spectroscopy (ATR‐FT‐IR), X‐ray diffraction (XRD), differential scanning calorimetric (DSC), dynamic mechanical thermal analysis (DMTA), and tensile measurements. Morphological characterization showed that the addition of PGA to PCL results in an increase in the average diameter of the nanofibers. According to these results, when the amount of PGA in the blend solution increased, the hydrophilicity and water uptake of the nanofibrous scaffolds increased concurrently, approaching those of PGA nanofibers. Differential scanning calorimetric studies showed that the PCL and PGA were miscible in the nanofibrous structure and the mechanical characterization under dry conditions showed that increasing PGA content results in a tremendous increase in the mechanical properties. In conclusion, the random nanofibrous PCL/PGA scaffold used in this study constitutes a promising material for soft‐tissue engineering. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Chitosan/silk fibroin composite scaffolds for wound dressing

Three‐dimensional (3D) chitosan/silk fibroin (CS/SF) porous composite scaffolds have been prepared by simply coating a thin layer of CS onto spunlaced SF scaffolds via hydrogen‐bonding assembly technique, and they were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and mechanical property measurements. The results show that porous scaffolds have a pore diameter around 50–200 μm, and improved mechanical property compared with SF, resulting from strong intermolecular hydrogen bonding interactions between CS and SF, together with the maintained β‐sheet structure of SF. The medical and biological properties of the composite scaffolds were further evaluated. The results demonstrate that they possess good biocompatibility and a broad spectrum of antimicrobial properties. The in vivo animal experiments show that the composite scaffolds promote skin regeneration of rats without any teratogenic effect and inflection, thus they are very promising in the application of wound dressings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42503.     

Fabrication and characterization of aligned nanofibrous PLGA/Collagen blends as bone tissue scaffolds

Aligned nanofibrous blends of poly (d, l-lactide-co-glycolide) (PLGA) and collagen with various PLGA/collagen compositions (80/20, 65/35 and 50/50) were fabricated by electrospinning and characterized for bone tissue engineering. Morphological characterization showed that the addition of collagen to PLGA resulted in narrowing of the diameter distribution and a reduction in average diameter. Differential scanning calorimetric (DSC) studies showed that the triple helix structure of the native collagen was not destroyed during the fabrication process. However, the blending had a marked effect on the overall enthalpy of the blends, whereby the total enthalpy decreased as the collagen content decreased. Thermogravimetric analysis showed the addition of collagen increased the hydrophilicity of the scaffolds. The crosslinking of collagen to increase the biostability was done using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) in ethanol and an overall ∼25% degree of crosslinking was achieved. The EDC crosslinking had little effect on the nanofibrous morphology of the 80/20 blend system; however, the nanofibrous features were compromised to some extent at higher collagen concentrations. The mechanical characterization under dry and wet conditions showed that increasing collagen content resulted in a tremendous decrease in the mechanical properties. However, crosslinking resulted in the increase in elastic modulus from 47 MPa to 83 MPa for the wet PLGA/Collagen 80/20 blend system, with little effect on the tensile strength. In conclusion, the aligned nanofibrous scaffold used in this study constitutes a promising material for bone tissue engineering.     

Thermal and optical properties of gelatin/poly(vinyl alcohol) blends

Differential scanning calorimetry, thermogravimetric analysis, X‐ray diffraction, and ultraviolet–visible spectroscopy of gelatin and poly(vinyl alcohol) (PVA) homopolymers and their blended samples were studied. The data revealed that the gelatin and PVA polymers were compatible over the investigated range of compositions; this contributed to the formation of hydrogen‐bonding interaction between their polar groups. The associated enthalpy‐of‐melting transition and thermal stability of the blended samples increased with increasing PVA content. This indicated that the crystalline structure of PVA was not destroyed completely in the blends, which was consistent with the X‐ray diffraction pattern of the 50/50 (wt %/wt %) blended gelatin/PVA sample. The absorption edge and optical band gap for allowed direct transition were determined from ultraviolet–visible spectra. The induced changes in the band structure are elucidated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Silk nanofibrous scaffolds assembled by natural polysaccharide konjac glucomannan

Natural silk fibroin nanofibers (SNF) have recently attracted great attention in the field of biomaterials due to their excellent biocompatibility, outstanding mechanical properties, and biomimetic nanostructures. However, the poor structural stability of SNF assembly in aqueous conditions remains a major obstacle to their biomedical application. In this work, SNF scaffolds with extracellular matrix-mimicking architecture and tunable properties were developed by using a small amount of konjac glucomannan (KGM) as a physical adhesive. Fourier transform infrared spectroscopy (FTIR) results revealed that KGM facilitated the formation of hydrogen bond networks between SNF as well as nanofibers/polysaccharide molecules, thereby reinforcing the interconnectivity between SNF. The water stability test showed that SNF scaffolds exhibited good structural stability in water when the mass ratio of KGM/SNF reached 2.5/100. Raising KGM content significantly enhanced the compression strength, modulus, and swelling ratio of the porous scaffold. Whereas, the nanofibrous morphology and porosity of the scaffolds were significantly sacrificed as KGM content exceeded 10% as evidenced by scanning electron microscopy (SEM) results. In vitro, cytocompatibility results also demonstrated the excellent biocompatibility of the biomimetic nanofibrous scaffolds, and the high porosity significantly enhanced cell viability. These results suggest that KGM-reinforced SNF scaffolds may serve as promising candidates for biomaterial applications.     

Degradation and Mechanical Behavior of Fish Gelatin/Polycaprolactone AC Electrospun Nanofibrous Meshes

With the increasing interest in biopolymer nanofibers for diverse applications, the characterization of these materials in the physiological environment has become of equal interest and importance. This study performs first-time simulated body fluid (SBF) degradation and tensile mechanical analyses of blended fish gelatin (FGEL) and polycaprolactone (PCL) nanofibrous meshes prepared by a high-throughput free-surface alternating field electrospinning. The thermally crosslinked FGEL/PCL nanofibrous materials with 84–96% porosity and up to 60 wt% PCL fraction demonstrate mass retention up to 88.4% after 14 days in SBF. The trends in the PCL crystallinity and FGEL secondary structure modification during the SBF degradation are analyzed by Fourier transform infrared spectroscopy. Tensile tests of such porous, 0.1–2.2 mm thick FGEL/PCL nanofibrous meshes in SBF reveal the ultimate tensile strength, Young's modulus, and elongation at break within the ranges of 60–105 kPa, 0.3–1.6 MPa, and 20–70%, respectively, depending on the FGEL/PCL mass ratio. The results demonstrate that FGEL/PCL nanofibrous materials prepared from poorly miscible FGEL and PCL can be suitable for selected biomedical applications such as scaffolds for skin, cranial cruciate ligament, articular cartilage, or vascular tissue repair.     

Production of silk sericin/silk fibroin blend nanofibers

Silk sericin (SS)/silk fibroin (SF) blend nanofibers have been produced by electrospinning in a binary SS/SF trifluoroacetic acid (TFA) solution system, which was prepared by mixing 20 wt.% SS TFA solution and 10 wt.% SF TFA solution to give different compositions. The diameters of the SS/SF nanofibers ranged from 33 to 837 nm, and they showed a round cross section. The surface of the SS/SF nanofibers was smooth, and the fibers possessed a bead-free structure. The average diameters of the SS/SF (75/25, 50/50, and 25/75) blend nanofibers were much thicker than that of SS and SF nanofibers. The SS/SF (100/0, 75/25, and 50/50) blend nanofibers were easily dissolved in water, while the SS/SF (25/75 and 0/100) blend nanofibers could not be completely dissolved in water. The SS/SF blend nanofibers could not be completely dissolved in methanol. The SS/SF blend nanofibers were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, and differential thermal analysis. FTIR showed that the SS/SF blend nanofibers possessed a random coil conformation and ß-sheet structure.