共查询到20条相似文献,搜索用时 78 毫秒
1.
模拟-测量结合反演焊接条件下材料热导率 总被引:1,自引:0,他引:1
联合数值模拟与温度场测量手段,反演了LY2铝合金焊接过程的热导率数据。将热导率数据分段线性化后,采用稳态下的低温数据及外推的高温数据作为初值,将其代入有限元模型中,模拟出焊接过程的温度场。使用热电偶测量了实际情况下的温度场,并计算温度模拟与测量之间的误差。应用遗传算法,计算出了不断改变热导率初值时温度模拟与试验间误差的最小值,此时对应的热导率数值即为所求。计算结果表明,热导率随温度变化速度的不同,出现不同的滞后现象。在此基础上,给出了焊接条件下热传导材料系数随温度及温度变化速度之间关系的模型。 相似文献
2.
3.
基于声发射信号的铝合金点焊裂纹神经网络监测 总被引:2,自引:0,他引:2
铝合金热加工过程的冶金行为比较复杂,在电阻点焊快速加热和冷却条件下,极易产生裂纹缺陷。基于虚拟仪器技术,以Lab VIEW为软件平台,结合Matlab数值分析软件,构建了电阻点焊过程声发射信号采集分析及铝合金点焊裂纹监测系统。以2A12铝合金电阻点焊熔核冷却结晶过程,即点焊焊接循环维持阶段的声发射信号为研究对象,提取与声发射信号强度相关的振铃计数、能量、有效电压及5层小波分解125~250 k Hz频带能量系数4个特征参数作为输入矢量,裂纹作为输出矢量,建立3层BP神经网络铝合金点焊裂纹的监测模型,并利用测试样本对该模型进行验证。结果表明,裂纹监测的正确率达到89.1%,为监测铝合金电阻点焊裂纹提供了一种有效的方法。 相似文献
4.
5.
摩擦焊接过程的热力耦合有限元分析 总被引:7,自引:0,他引:7
采用热力耦合有限元分析方法,综合考虑摩擦焊接过程中不同的产热机制、随温度变化的材料性能、飞边形成及摩擦系数随速度、温度、压力的变化规律,直接由焊件材料的性能参数及设定的焊接规范参数(轴向压力与转速随时间的变化曲线)对焊接全过程的焊接参数(摩擦转矩、轴向缩短量及平均温度)、物理参量场(温度场、应力场、变形场)及焊合区金属晶粒尺寸的变化规律进行了数值模拟,得到了焊接过程中摩擦表面上切应力、加热功率、温度及轴向压应力的分布及变化规律,实现了对焊合区金属晶粒尺寸的数值模拟。 相似文献
6.
夹套是广泛运用在化工、医药等行业设备上的加热冷却装置,夹套焊缝是常常发生开裂泄漏的失效部位,焊接残余应力是导致开裂泄漏的重要因素之一。利用有限元技术对一种新型多晶硅还原炉挠性冷却夹套的焊接过程的温度场、残余应力和塑性应变场进行了数值模拟。借助ANSYS的APDL编程和单元生死技术,采用热-结构直接耦合法,传热分析采用含高斯热源的瞬态过程、应力分析为稳态,材料本构为随温度变化的双线性随动强化弹塑性模型。通过模拟获得焊缝区域残余应力和塑性应变的分布规律,为同类夹套的焊接强度评定提供了有效方法。 相似文献
7.
为深入研究模具温控凝固成形工艺,研制出一种柱状件成形的试验装置,包括成形模具和温度测控系统。设计独立的加热及冷却温控单元各8组,均匀分布在模具中,加热单元采用16根远红外加热管,模具冷却采用冷却水管道强迫对流方式进行,模壁内的冷却管道通过机加工完成。使用8个位于模具不同位置的热电偶检测成形过程中熔体的实时温度,系统根据数据采集模块采集到的温度数据,输出控制信号分别控制各加热及冷却单元的通断,从而实现模具温度的自动控制。流程控制通过基于工控组态软件MCGS开发的应用系统实现,可进行整个过程的温度数值、曲线显示及报警、循环策略控制。数值模拟与成形试验的结果表明,计算值与试验值之间的误差基本在8%以下,零件内部成形质量较好,无缩孔等缺陷。 相似文献
8.
9.
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献