共查询到20条相似文献,搜索用时 78 毫秒
1.
近年来,微通道板光电倍增管(MCP-PMT)是指以微通道板为电子倍增系统的光电倍增管,与传统的静电聚焦打拿极相比,在结构上使得电子从光电阴极到阳极的距离大大减小,加上微通道板的电子倍增特性等优点,使该种光电倍增管在较多领域得到了广泛应用,研究其性能,对于设计、制造高性能的微通道板光电倍增管具有指导意义.基于这种情况,本文简要介绍了光电倍增管的国内外研究现状,并对两者进行了对比分析,对基于微通道板光电倍增管的结构及工作原理进行了叙述,然后对光电倍增管的响应性能、抗电磁场性能、增益性能和暗电流性能进行了研究,从而为关注这一话题的研究人员提供理论依据. 相似文献
2.
近年来随着世界各国高能物理技术的发展。对探测用光电倍增管的脉冲线性电流性能要求越来越高。国外已有一种能够输出1.5A以上脉冲线性电流的光电倍增管。目前国内普通的光电倍增管只能够输出100mA的脉冲线性电流。本文结合作者多年来研制该种光电倍增管的经验,力求从理论上介绍该种光电倍增管的工作原理和研制技术途径。 相似文献
3.
4.
孙建宁 任玲 丛晓庆 黄国瑞 金睦淳 李冬 刘虎林 乔芳建 钱森 司曙光 田进寿 王兴超 王贻芳 韦永林 辛丽伟 张昊达 赵天池 《红外与激光工程》2017,46(4):402001-0402001(5)
针对高能物理、核物理等国家大科学装置对核心探测器件的需求,研究不同于金属打拿极型倍增系统的大尺寸微通道板型光电倍增管。该光电倍增管最主要的特点是具有20 in(1 in=2.54 cm)的低本底玻壳和微通道板型倍增极结构,使用Sb-K-Cs阴极作为光电转换阴极,该阴极对350~450 nm波段光子的量子效率高,倍增极采用两片微通道板,在电压比较低的情况下可实现107的倍增能力,从而提高了光电倍增管的探测效率和单光子探测能力。与传统的金属打拿极型光电倍增管相比,20 in微通道板型光电倍增管是一种全新的产品结构,具有单光子峰谷比高、本底低、响应时间快、后脉冲比例小等特点。 相似文献
5.
6.
光电倍增管的技术发展状态 总被引:2,自引:0,他引:2
简述了光电倍增管的结构和用途,着重介绍了新型微通道板光电倍增管的结构特点和性能优势,同时对当今光电倍增管的最新发展状况进行了陈述和分析. 相似文献
7.
8.
可作光子计数的雪崩光电二极管 总被引:1,自引:0,他引:1
友清 《激光与光电子学进展》1997,34(5):15-18
对于光电倍增管不适用的高灵敏度弱光探测应用,存在一种固体替代器件,即雪崩光电二极管。这种器件在半导体内产生光电倍增,而光电倍增管在真空中产生电子倍增。雪崩光电二极管具有与半导体技术有关的微型化优点。由于这种器件能对单光子计数和探测很短时间间隔,它们已在光雷达、测距仪探测器和超灵敏光谱学方面找到日益增长的应用。另外,雪崩光电二极管在光纤通讯方面正与PIN光电二极管相竞争。雪崩光电二极管如何工作与任何光电二极管,样,雪崩光电二极管中由两类半导体组成的p-n结只允许电流在一个方向流动。光电二极管由一个掺有… 相似文献
9.
10.
11.
12.
《Electron Devices, IEEE Transactions on》1963,10(2):89-94
The dispersive characteristics of the loaded-waveguide type interaction structures commonly employed in high-power traveling-wave tubes cause a large variation of efficiency with frequency. This efficiency variation can be reduced by period tapering of the output section of the tube. The physical reasons underlying the improvement in tube performance, calculated results using large-signal traveling-wave tube equations and experimental confirmation of the calculations are described. 相似文献
13.
14.
16.
对晶体硅太阳能电池片生产用扩散炉反应管压力平衡系统的要求及原理进行了阐述,由于反应管内气流变化对扩散效果影响很大,本系统根据实际使用经验,对工艺管内压力进行检测,在外围尾气排放不稳定的条件下,对反应管内气体排放进行调节,从而控制管内压力,使管内流速均匀,达到好的扩散效果。 相似文献
17.
《Microwave Theory and Techniques》1963,11(1):3-17
A 24-Gc traveling-wave tube of the type ECL-1180 /24W80 was used for generating nanosecond carrier pulses. The helix of the traveling-wave tube was modulated by a 40-Mc high voltage sine wave. Duration, power and carrier frequency shift of the output RF pulse were examined quantitatively with respect to the modulating voltage. It was found that the delay time of a traveling-wave tube has a large effect on the characteristics of the output pulse. The theory of transmission line modulators was developed to explain the pulse shaping mechanism in the traveling-wave tube. Observations of output pulses were made with three measuring devices, i.e., video-sampling oscilloscope with crystal detector, interferometer, and spectrum analyzer. The interferometer was found to be useful for measuring half-amplitude duration of carrier pulse. Output pulses with half-amplitude duration of as short as 1 nsec were observed. 相似文献
18.
《Electron Devices, IEEE Transactions on》1958,5(4):243-251
The propagation constants of a traveling-wave tube can be normalized in such a way that curves of a quantity proportional to gain per wavelength, vs a parameter proportional to electron velocity, approach a single curve at large values of a space-charge parameter. The usual Pierce normalization yields analogous curves that approach an asymptotic curve for zero space charge. Suitable curves for calculation of traveling-wave tube gain, based on this large space-charge normalization, have been computed and are presented for a wide range of values of the relevant parameters. It is found that, even for very large values of the gain parameter, corresponding to values of C of the order of 0.3, these curves do not depart substantially from the asymptotic curve. 相似文献
19.