共查询到20条相似文献,搜索用时 453 毫秒
1.
偏心大小头展开图的精确计算绘制法张志发(浙江省工业设备安装公司)1993年《安装》第3期介绍了通过进行一些简单计算绘制偏心大小头展开图的方法,即在通过简单计算绘出正大小头展开图的基础上,再进行一些简单计算,绘制偏心大小头展开图的方法。按此方法下料,确... 相似文献
2.
3.
钢井架叉开弦杆斜架基础设计 总被引:1,自引:0,他引:1
本文详细论述了钢井架叉开弦杆斜架基础设计计算内容和方法,规范了基础地脚锚栓及底座构造作法,用计算机绘图方法解决了基础立体投影图及模板展开图手工绘制方法的错误与误差问题。 相似文献
4.
5.
6.
本文提出一种参数化绘制螺旋叶片展开图的方法及其计算机应用程序,该程序用VBA语言编写,在AutoCAD环境下运行,一旦调用,即可按给定的螺旋叶片的外径D,轴径d,螺距S,自动计算图形尺寸及确定绘图比例,从而绘出有完整尺寸的螺旋面展开图。 相似文献
7.
1计算公式推导图1大小头计算公式推导大小头的大口和小口的展开图半径分别是L1和L2,在实际工作中L1和L2的数值往往很大,不利于放样工作,为了绘制出大口和小口的展开弧形形状,可以通过下面方法来完成。以大口为例,假设图1(b)中的弧长aa’是大小头的大口展开长度.即,πD 相似文献
8.
对一些大型金属制件的展开,可采用计算绘制法再加以计算机辅助来完成.文章略要介绍了炉壳和弯头展开的计算绘制原理和程序方框图,并给出二个应用实例. 相似文献
9.
裤衩型钢煤斗曲面展开图的计算机自动生成 总被引:1,自引:0,他引:1
分析了裤衩型钢煤斗外形的几何特点,建立了裤衩型钢煤斗漏斗表面的数学模型,分析了曲面展开的算法。以此为基础,编制了漏斗表面展开图的绘图程序,由计算机自动绘制出了展开图。以所绘制的展开图为依据,制作了实物模型,进一步验证了展开图绘图程序算法的正确性和程序的可靠性,并将该程序应用于实际工程的设计中,得到了很好的应用效果。 相似文献
10.
介绍了一种采用C语言开发的一套集弯曲件自动展开,图形快速绘制和尺寸标注于一体的弯曲件毛坯CAD软件,该软件对各个弯曲面采用相对坐标分块的计算的方式进行展开,方便灵活。通过使用计算标准齐全的数据库系统可使弯曲件的展开计算结果快速准确。该软件还可以用于不带弯曲线的平板零件的CAD工作。 相似文献
11.
12.
13.
14.
一种提高CCD探测灵敏度的方法 总被引:4,自引:1,他引:3
阐述了影响CCD探测灵敏度的暗电流及暗电流噪声的产生机理,分析了其对CCD性能的影响。在此基础上,提出了一种新型的利用半导体致冷器件TEC对CCD进行致冷的方案,并对设计过程中要注意的问题进行了具体分析。最后运用实例说明了通过此方法,大大地降低了CCD暗电流,提高了其探测灵敏度。文章还对这种新颖的热电致冷方法和传统的液氮致冷方法进行了分析、比较,指出了CCD热电致冷的优势及发展前景。 相似文献
15.
16.
骨的特殊性能决定了其在人体中起重要的功能作用,人工骨材料对骨缺损的治疗有重要意义。羟基磷灰石是人和动物骨骼的主要无机成分;壳聚糖是天然可降解多糖,降解产物为对人体组织无毒、无害的氨基葡萄糖。纳米羟基磷灰石/壳聚糖复合生物材料可以实现羟基磷灰石和壳聚糖两者的优势互补,具有优良的生物活性、生物相容性和力学性能。介绍了近年来纳米羟基磷灰石/壳聚糖复合生物材料的主要合成方法(如共混法、共沉淀法、原位沉析法、交替沉积法和模拟体液法等),并在此基础上介绍了基于纳米羟基磷灰石/壳聚糖的三元复合材料的研究及发展情况;最后,展望了纳米羟基磷灰石/壳聚糖复合生物材料未来的发展方向。 相似文献
17.
研究裂纹的形成和扩展规律是钢结构疲劳断裂的一个重要课题。该文讨论了一种十分经济有效的检测钢结构疲劳裂纹萌生与扩展的方法,即Beach Marking方法。首先简要总结了该方法的发展历史和研究现状,并系统归纳了其基本原理和关键问题。同时,通过焊接H型钢梁的试验案例,探索该方法应用在大尺寸构件上的实际效果,并具体展示该方法的设计步骤和应用过程。试验表明,Beach Marking方法简单实用,关键在于设计合理的疲劳荷载序列;通过分析疲劳断口上留下的疲劳弧线,并结合断裂力学理论,可以获得疲劳裂纹的扩展规律和参数,为钢结构疲劳寿命数值分析提供科学依据。 相似文献
18.
Gang Song Jiahao Lin F. W. Williams Zhigang Wu 《International journal for numerical methods in engineering》2006,68(12):1281-1300
Although LQG regulators have been used in many engineering fields, the relevant control technique still requires further development, particularly when the disturbances are random and non‐stationary. Therefore this paper presents a new method for non‐stationary seismic random excitations in which LQG control is applied to adjacent tall buildings which are connected together by active hydraulic actuators. The ground motion is induced by non‐stationary uniformly modulated white noise excitation of the bedrock which passes through a single layered soil which is regarded as a single‐peak filter. This represents an advance on other papers in the literature, which use stationary random white noise or filtered white noise as the ground excitation. The method uses the pseudo excitation method in conjunction with two different precise integration schemes to analyse structural non‐stationary seismic random responses via solution of the differential Riccati equations of this transient LQG control process. Unlike previous work in the literature, the performance index used has a finite time region, rather than an infinite one. Reasonable control effects are demonstrated via numerical simulation for two adjacent 20‐storey buildings which are connected by hydraulic activators. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
In this paper a practical approach to design, based on the concept of selection, is presented. The approach involves: first, the generation of alternative concepts using ideation tecniques; second, the selection of the ‘most-likely-to-succeed’ concepts for further development into feasible alternatives; third, the formulation and solution of selection-decision-support problems to rank the feasible alternatives in order of preference using multiple attributes.The method presented in this paper is a combination of the methods proposed by Pugh and by Mistree and Muster. The former method is appropriate for use in concept selection, which is characterized by many alternatives and essentially insight-based ‘soft’ information. The latter method is appropriate when there are few alternatives and a mix of science-based ‘hard’ and insight-based ‘soft’ information. The method presented by Mistree and Muster is therefore used to formulate and solve the selection-decision-support problem. The design example used in this paper is a modified version of that used by Pugh. 相似文献
20.
基于微放电加工元件轮廓测量的探针制造 总被引:1,自引:0,他引:1
KAWADAMasayoshi MITSUIKimiyuki 《纳米技术与精密工程》2004,2(2):124-131
为了推动微加工和微机械技术的进步,微型零件轮廓和尺度测量方法的发展非常重要.可行方法之一就是使用带微探头的小型三维轮廓测量仪.这种仪器的探头必须针对某个零件的测量,按照最佳外形制造.微放电加工有着极小加工力,可用于各种探头的制造,本研究中用它进行探头加工.用这种方法制造了多种探头,将其装在基于扫瞄隧道显微技术(STM)的小型三维轮廓测量仪上.所制造的探头已被成功地用于各种微元件测量,结果表明此方法可行. 相似文献