Effects of Cd-Substitution Site on the Electrical Conductivities in Pb(Ni1/3Nb2/3)O3-PbZrO3-PbTiO3 Ceramics

The effects of Cd²⁺ substitution for Pb²⁺ and Ni²⁺ ions (on the A-site and B-site of the ABO₃ perovskite structure, respectively) on the electrical conductivities in Pb(Ni_1/3-Nb_2/3)O₃-PbZrO₃-PbTiO₃ (PNN-PZ-PT) ceramics have been investigated. Generally, the compounds that contain PbO show p -type conductivity, because of PbO evaporation. Thus, the conductivities are known to be proportional to the PbO evaporation. However, PNN-PZ-PT ceramics exhibit a reciprocal relationship between the conductivities and the evaporation of PbO. Generally, no vacancy change is observed with the substitution of the same-charge valence ion. However, in the PNN-PZ-PT ceramic, lead vacancies could be created or annihilated by replacing Pb²⁺ and Ni²⁺ ions with Cd²⁺ ions, because of incomplete substitution. The electrical conductivities are influenced by this incomplete substitution.     

Phase Diagram of the Bi4Ti3O12–BaTiO3–(Na1/2Bi1/2)TiO3 System

The phases formed in the ternary system (Na_1/2Bi_1/2)TiO₃–Bi₄Ti₃O₁₂–BaTiO₃ (NBT–BTO–BT) were studied at 1150°C in air. A very accurate picture of the ternary phase diagram was obtained examining almost 90 different compositions, exploiting low-angle XRD analyses to study the layer compounds. New compounds with five perovskite blocks ( m =5) were discovered deep in the phase diagram. No compounds with m >5 were found. It was also established that pure perovskite compounds can be obtained only at compositions very close to the NBT–BT line. The relationships between the phases is discussed and it is hypothesized that the number of perovskite blocks in the system is determined by charged sites being created by the progressive substitution of Bi³⁺ in the A site of the perovskite blocks of BTO with the A cations of the perovskite end-member.     

Phase Equilibria and Structural Species in NdCl3–NaCl, NdCl3–CaCl2, PrCl3–NaCl, and PrCl3–CaCl2 Systems

Equilibrium phase diagrams for the systems NdCl₃–CaCl₂ and NdCl₃–NaCl were determined by differential thermal analysis. A simple eutectic was observed at 59 ± 1 mol% CaCl₂ and 600°± 2°C in the NdCl₃–CaCl₂ system. A compound NaCl.3NdCl₃ which melts incongruently at 545°± 5°C to NdCl₃ and a liquid containing approximately 47 mol% NaCl, and a eutectic at 68 mol% NaCl and 439°± 2°C were found in the NdCl₃–NaCl system. On the basis of agreements between the activities calculated by the Clausius–Clapeyron equation and Temkin's model using the present data for the NdCl₃–CaCl₂ system and the literature data for the PrCl₃–CaCl₂ system, the melts in the former system consist of Nd³⁺, Ca²⁺, and Cl⁻ ions and in the latter system of Pr³⁺, Ca²⁺, and Cl⁻ ions. The above approach indicates the presence of Na⁺, Cl⁻, and NdCl^2-₅ ions in the NaCl-rich melts and Nd³⁺, Cl⁻, and NdCl⁻₄ in the NdCl₃-rich melts in the NdCl₃–NaCl system. Analogous ions were indicated in the melts of the PrCl₃–NaCl system.     

Formation and Structural Characterization of 1:1 Ordered Perovskites in the Ba(Zn1/3Ta2/3)O3–BaZrO3 System

The phase stabilities in the(1−x)Ba(Zn_1/3Ta_2/3)O₃ (BZT)-xBaZrO₃(BZ)system have been investigated using samples prepared by the mixed oxide method. The substitution of Zr⁴⁺destabilizes the 1:2 cation ordering in BZT and pro-motes the formation of a cubic, 1:1 ordered structure with a doubled perovskite repeat. The homogeneity range of the 1:1 phase extends from x = 0.04 to approximately x = 0.25; substitutions beyond this range stabilize a disordered perovskite. The limits of stability of the 1:1 ordering coin-cide with compositions previously found to exhibit anoma-lies in their dielectric loss. The range of homogeneity is consistent with a "random layer" model for the 1:1 ordered "Ba{β';_1/2β^1/2}O₃" structure. In this model the B× positions are assumed to be occupied exclusively by Ta⁵⁺, and the b× sites by a random distribution of Zn₂₊, Zr₄₊, and the remaining Ta 5+ cations. The validity of the model, where the ordered solid solutions can be represented by Ba{[Zn_{2− y /3}Ta_{(1−2 y )/3}Zr y ]_1/2[Ta]_1/2}O₃(y =2x)was con-firmed by Rietveld refinements conducted using data col-lected with a synchrotron X-ray source.     

Incorporation of Er3+ into BaTiO3

The incorporation of Er³⁺ into BaTiO₃ ceramics was investigated on samples containing 0.25, 0.5, 1, 2, 8, and 10 at.% of dopant, after sintering at 1350–1550°C in air. For Er³⁺ concentrations ≤1 at.%, dense and large-grained ceramics with low room-temperature resistivity (10²–10³Ω·cm) were obtained. The observed properties are largely independent of stoichiometry. Simultaneous substitution of Er³⁺ at both cation sites, with higher preference for the Ba site, is proposed. The behavior of heavily doped ceramics depends on stoichiometry. When Ba/Ti < 1, the electrical properties change from slightly semiconducting to insulating as Er concentration increases from 2 to 8 at.%. The ceramics have tetragonal perovskite structure and contain a large amount of Er₂Ti₂O₇ pyrochlore phase. On the other hand, when Ba/Ti > 1, the ceramics are insulating, fine-grained, and single phase. In this case, incorporation of Er³⁺ predominantly occurs at the Ti site, with oxygen vacancy compensation. Incorporation is accompanied by a significant reduction of tetragonality and by expansion of the unit cell. The different results indicate that Er³⁺ solubility at the Ba site does not exceed 1 at.%, whereas solubility at the Ti site is at least 10 at.%. However, the incorporation of Er³⁺ and the resulting properties are also strongly affected by sintering conditions.     

Microwave Dielectric Properties of CaTiO3-CaAl1/2Nb1/2O3 Ceramics Doped with Li3NbO4

The microwave dielectric properties of CaTi_{1− x} (Al_1/2Nb_1/2) _x O₃ solid solutions (0.3 ≤ x ≤ 0.7) have been investigated. The sintered samples had perovskite structures similar to CaTiO₃. The substitution of Ti⁴⁺ by Al³⁺/Nb⁵⁺ improved the quality factor Q of the sintered specimens. A small addition of Li₃NbO₄ (about 1 wt%) was found to be very effective for lowering sintering temperature of ceramics from 1450–1500° to 1300°C. The composition with x = 0.5 sintered at 1300°C for 5 h revealed excellent dielectric properties, namely, a dielectric constant (ɛ_r) of 48, a Q × f value of 32 100 GHz, and a temperature coefficient of the resonant frequency (τ_f) of −2 ppm/K. Li₃NbO₄ as a sintering additive had no harmful influence on τ_f of ceramics.     

Microscopic Calculation of Dielectric Loss at Microwave Frequencies for Complex Perovskite Ba(Zn1/3Ta2/3)O3

The dielectric loss tangent at microwave frequencies for the complex perovskite Ba(Zn_1/3Ta_2/3)O₃ was calculated with respect to the degree of structural disorder on B sites. Starting out from the equations of ion motion, dielectric loss was expressed in terms of the pair-correlation functions corresponding to the ordering of Zn and Ta ions on B sites. The characteristic length included in the pair-correlation functions corresponds to the average size of the region containing disorder in ion arrangements on B sites; thus the relation between the structural disorder on the B site and the dielectric loss tangent at microwave frequencies was clarified theoretically. The numerical results show that the microwave loss tangent values change their power from – 3 to – 6 with increasing degree of order on the B site, which agrees well with the experimental observations. Results obtained here confirm the physical origin of the microwave loss of complex perovskite Ba(Zn_1/3Ta_2/3)O₃.     

Phase Transitions and Electrical Properties of (Na1−xKx)(Nb1−ySby)O3 Lead-Free Piezoelectric Ceramics With a MnO2 Sintering Aid

Lead-free piezoelectric ceramics (Na_{1− x} K _x )(Nb_{1− y} Sb _y )O₃+ z mol% MnO₂ have been prepared by a conventional solid-state sintering technique. Our results reveal that Sb⁵⁺ diffuses into the K_0.5Na_0.5NbO₃ lattices to form a solid solution with a single-phase orthorhombic perovskite structure. The partial substitution of Sb⁵⁺ for B-site ion Nb⁵⁺ decreases the paraelectric cubic-ferroelectric tetragonal phase transition ( T _c) and the ferroelectric tetragonal-ferroelectric orthorhombic phase transition ( T _O–F), and retains strong ferroelectricity. A small amount of MnO₂ is enough to improve the densification of the ceramics. The co-effects of MnO₂ doping and Sb substitution lead to significant improvements in ferroelectric and piezoelectric properties. The ceramics with x =0.45–0.525, y =0.06–0.08, and z =0.5–1 exhibit excellent ferroelectric and piezoelectric properties: d ₃₃=163–204 pC/N, k _P=0.47–0.51, k _t=0.46–0.52, ɛ=640–1053, tan δ=1.3–3.0%, P _r=18.1–22.6 μC/cm², E _c=0.72–0.98 kV/mm, and T _C=269°–314°C.     

Structure and Dielectric Properties of Pb(Sc2/3W1/3)O3–Pb(Zr/Ti)O3 Relaxors

The structure and dielectric properties of (1− x )Pb(Sc_2/3W_1/3)O₃–( x )Pb(Zr/Ti)O₃ ceramics have been investigated over a full substitution range. All compositions with x < 0.5 adopt a cubic perovskite structure; however, for x ≤ 0.25 a doubled cell results from a 1:1 ordered distribution of the B-site cations. The structural order in Pb(Sc_2/3W_1/3)O₃ (PSW) can be described by a random-site model with one cation site occupied by Sc³⁺ and the other by a random distribution of (Sc_1/3³⁺W_2/3⁶⁺). The ordering is destabilized in solid solutions of PSW with PbZrO₃ (PSW–PZ), but stabilized by PbTiO₃ in the (1− x )PSW–( x )PT system. The changes in order are accompanied by alterations in the dielectric response of the two systems. For PSW–PZ the temperature of the permittivity maximum ( T _ɛ,max) increases linearly with x ; however, for PSW–PT T _ɛ,max decreases in the ordered region (up to x = 0.25) and then increases rapidly as the order is lost. Similar effects were produced by modifying the degree of order of (0.75)PSW–(0.25)PT; when the order parameter was reduced from ∼1.0 to ∼0.65, T _ɛ,max increased by more than 60°C.     

Populations and Emission Properties of the 5I6 and 5I7 Levels in Ho3+ Doped into PbO–Bi2O3–Ga2O3 Glasses

Emission properties of PbO–Bi₂O₃–Ga₂O₃ glasses doped with Ho³⁺ were investigated for fiber-optic amplification at the 1.18 μm wavelength region. When the glasses were doped with Ho³⁺ ions only, there was a weak emission at 1.18 μm with a lifetime of ∼200 μs. However, when Yb³⁺ ions were codoped, the lifetime of the 1.18 μm emission increased to 630 μs together with a significant increase in intensity. A similar enhancement in the intensity and lifetimes was realized for the 2.05 μm emission. These effects are due to energy transfer from the Yb³⁺:²F_5/2 to the Ho³⁺:⁵I₆ level. Devitrification of the ternary PbO–Bi₂O₃–Ga₂O₃ glasses was efficiently suppressed by adding 10 mol% GeO₂. Optimum Ho³⁺ concentration was ∼0.4 mol%, whereas Yb³⁺ ions can be added up to the solubility limit.     

Electron Paramagnetic Resonance Investigation of Acceptor Centers in Pb(Zr,Ti)O3 Ceramics

The nature of extrinsic point defects in lead zirconate titanate (PZT) ceramics of various compositions prepared by solution chemistry has been explored. Using electron paramagnetic resonance (EPR), several impurity sites have been identified in the as-received materials, which include Fe³⁺oxygen vacancy (V_O^‥) complex and isolated Cu²⁺ ions; both of these ions are incorporated into the lattice by replacing the Ti(Zr) ion. A Fe₃₊V_O^‥ complex serves as a sensitive probe of the local crystalline field environment of the ceramic; the symmetry of this defect is roughly correlated with its phase diagram as the composition is varied from PbTiO₃ to PbZrO₃. The Fe³⁺V_O^‥ complex experiences tetragonal, rhombic, or orthorhombic symmetry as the composition is varied from PbTiO₃ to PbZrO₃. As the composition of the Cu²⁺ ion is varied, it appears as though the addition of Zr, and not necessarily a change in phase, is largely responsible in determining the local environment of this acceptor impurity. Also, the Cu²⁺ resonance parameters weakly reflect the relative Ti–O(Zr–O) bond covalency in the perovskite lattice.     

Mullite-Type Structures in the Systems Al2O3–Me2O (Me = Na, K) and Al2O3–B2O3

A morphous solids belonging to the systems Al₂O₃–Me₂O (Me = Na, K) and Al₂O₃–B₂O₃ were prepared by nitrate decomposition, introducing boron in the form of boric acid. Crystalline metastable solids with pseudotetragonal symmetry were obtained from thermal treatment at 850° to 900°C for the compositions Al₆Me_xO_{(9+0.5 x )} ( x ≅ 1; Me = Na, K) and Al_{6- x} B _x O₉ (1 x 3). The resultant solids were stable only within a difinite temperature range and transformed, with further treatment increases, into stable equilibrium phases. The structures of the metastable phases were examined by X-ray diffraction and Fourier transform infrared spectroscopy, and both analyses showed a mullite type of framework, inside of which the atomic coordinates were refined in the Pbam (no. 55) space group. The present results indicate that these silica-free mullite structures are stabilized by two different mechanisms: (1) interstitial occupation of bulky cations (Na⁺, K⁺) or (2) substitution of B for Al in some of the tetrahedral positions.     

Properties of BaO–R2O3– Ga2O3–GeO2 (R = Y, Al, La, and Gd) Glasses

Barium gallogermanate glasses were prepared with substitutions of Al₂O₃, Y₂O₃, La₂O₃, and Gd₂O₃ for Ga₂O₃. The effects of these substitutions on the glass transformation temperature, viscosity, thermal expansion, and molar volume have been determined. The changes in properties associated with each substitutional ion are consistent with structural roles reported for these ions in other glasses. Aluminum acts as an intermediate with [AlO₄^–] tetrahedra substituting directly for [GaO₄^–] tetrahedra. Yttrium and gadolinium act as "atypical" modifier ions because of their large field strengths. Finally, the properties of the La₂O₃-substituted glasses indicate a possible dual structural role for La³⁺ ions in these glasses.     

Synchrotron Radiation Ti-k XANES Study of TiO2─Y2O3-Stabilized Tetragonal Zirconia Polycrystals

Valence state and site symmetry of Ti ions in TiO₂–Y₂O₃–ZrO₂ powders with 2 mol% Y₂O₃ and 5, 10, 15, and 20 mol% TiO₂, respectively, are studied by X-ray absorption near-edge spectroscopy (XANES). Tetravalent Zr⁴⁺ ions are replaced predominantly by Ti⁴⁺ ions. Within the solubility region of Ti ions, a subsequent displacement of Ti ions from the center of symmetry is observed with increasing TiO₂ content in TiO₂–Y₂O₃-stabilized tetragonal ZrO₂ polycrystals (Ti-Y-TZP) under investigation. This behavior cannot be interpreted with a random substitution of Ti⁴⁺ ions on Zr⁴⁺ lattice sites. On the contrary, this correlation between the TiO₂ content in Ti-Y-TZP and the shift of Ti ions indicates an increasing interaction between the Ti ions with growing TiO₂ content, caused by a subsequent clustering of Ti ions.     

Effect of MnO2 Addition on the Structure and Electrical Properties of Pb(Zn1/3Nb2/3)0.20(Zr0.50Ti0.50)0.80O3 Ceramics

Pb(Zn_1/3Nb_2/3)_0.20(Zr_0.50Ti_0.50)_0.80O₃ ceramics of pure perovskite structure were prepared by the two-stage method with the addition of 0–3.0 wt% MnO₂ and their piezoelectric properties were investigated systematically. The MnO₂ addition influences in a pronounced way both the crystal structure and the microstructure of the materials. The materials are transformed from the tetragonal to the rhombohedral structure, and the grain size is enhanced when manganese cations are added. The distortion of crystal structure for samples with MnO₂ addition can be explained by the Jahn–Teller effect. The values of electromechanical coupling factor ( k _p) and dielectric loss (tan δ) are optimized for 0.5-wt%-MnO₂-doped samples ( k _p= 0.60, tan δ= 0.2%) and the mechanical quality factor ( Q _m) is maximized for 1.0-wt%-MnO₂-doped samples ( Q _m= 1041), which suggests that oxygen vacancies formed by substituting Mn³⁺ and Mn²⁺ ions for B-site ions (e.g., Ti⁴⁺ and Zr⁴⁺ ions) in the perovskite structure partially inhibited polarization reversal in the ferroelectrics. The ceramics with 0.50–1.0 wt% MnO₂ addition show great promise as practical materials for piezoelectric applications.     

Effect of BaWO4 on the Microwave Dielectric Properties of Ba(Mg1/3Ta2/3)O3 Ceramics

Physical and microwave dielectric properties of complex perovskite Ba(Mg_1/3Ta_2/3)O₃ ceramics have been investigated as a function of the amount of BaWO₄ in the temperature range from 20° to 80°C at 10.5 GHz. Up to 0.05 mol BaWO₄ addition, the lattice constant ratio ( c/a ), ordering parameter, apparent density, and unloaded Q all increase, due to the increase in the substitution of Ta⁵⁺ ions of Ba(Mg_1/3Ta_2/3)O₃ by W⁶⁺ ions from the melted BaWO₄ at above 1430°C. With further addition of BaWO_4, the unloaded Q decreases, due to an increase of the BaWO₄ phase. The temperature coefficient of resonant frequency (TCF) can be controlled by the volume mixture rule of Ba(Mg_1/3Ta_2/3)O₃ and BaWO₄. When 0.09 mol BaWO₄ is added, TCF becomes 0 ppm/°C.     

A/B Site Modified CaTiO3 Dielectric Ceramics for Microwave Application

(Li_1/2Nd_1/2)²⁺ substitution into the A site and (Mg_1/3Ta_2/3)⁴⁺ substitution into the B site of CaTiO₃ ceramic were investigated, respectively. The modified CaTiO₃ dielectric ceramics prepared by conventional solid-state method exhibit single perovskite structure and improved dielectric properties. Optimal microwave dielectric properties of ɛ_r=112.6, Q × f =4480 GHz, τ_f=8.2 ppm/°C in [Ca_0.4(Li_1/2Nd_1/2)_0.6] TiO₃ and ɛ_r=60.2, Q × f =36900 GHz, τ_f=−10.1 ppm/°C in Ca[Ti_0.4(Mg_1/3Ta_2/3)_0.6] O₃ are obtained, which indicates their potential for microwave application. The effects of change of crystal structure on dielectric properties are also discussed.     

Surface Decomposition of Strontium-Doped Soft PbZrO3–PbTiO3

Sintering temperature has a pronounced effect on perovskite phase stability at the surface of Pb_0.88Sr_0.12Zr_0.54Ti_0.44Sb_0.02O₃ (PSZT) soft piezoelectric ceramics ( d ₃₃≈ 600 pC/N). After sintering 4 h at 1070°C, XRD reveals only perovskite PSZT peaks in the bulk and at the surface. As sintering temperature increases, XRD from the ceramic surface reveals a second-phase peak at ∼27° (2θ), 0.316 nm ( d -spacing). After 4 h at 1280°C, further second-phase peaks are observed, confirming it to be monoclinic ZrO₂, accompanied by a strong increase in the degree of tetragonality of the perovskite phase. These observations are consistent with decomposition of the PSZT to ZrO₂ and tetragonal PZT (PbZrO₃–PbTiO₃) associated with PbO loss. SEM and cross-sectional TEM indicated that surface decomposition had progressed ∼0.5 mm into the sample after 4 h at 1280°C.     

Preparation and Cu+-Ion-Conducting Properties of the Glasses in the System CuBr–Cu2MoO4–Cu3PO4

Cu⁺-ion-conducting glasses were prepared in the pseudoternary system CuBr–Cu₂MoO₄–Cu₃PO₄, and the ion-conducting properties of the glasses obtained were compared to those of the glasses in the system CuI—Cu₂MoO₄—Cu₃PO₄, which contain CuI instead of CuBr. The CuBr—Cu₂MoO₄—Cu₃PO₄ glasses showed high ion conductivities in the range of 10⁰ to 10⁻² S · m⁻¹ at room temperature. The change in ion-conducting properties caused by the substitution of PO^3-₄ anions for MoO²⁻₄ anions was larger than the change caused by the substitution of Br⁻ anions for I⁻ anions in the glasses containing a constant amount of the cuprous halides.     

Optical Spectra of Synthetic Spinels in the System MgAl2O4–MgCr2O4

Unpolarized optical spectra were measured in the wavelength range 322–1666 nm by the diffuse reflection technique from spinel powders synthesized in the system MgAl₂O₄–MgCr₂O₄. The spectra were interpreted by the crystal-field theory on the basis of trigonally distorted spinel octahedra with D_3d symmetry. For chromium-rich solid solutions, including the MgCr₂O₄ end-member, results after peak fittings showed octahedral D_3d local symmetry around Cr³⁺ ions, identical to the crystallographic site symmetry. For chromium-poor solid solutions, however, octahedral C_3v local symmetry was suggested around Cr³⁺ ions, different from the D_3d crystallographically expected.