Impact of battery storage on economics of hybrid wind‐diesel power systems in commercial applications in hot regions

Integration of wind machines and battery storage with the diesel plants is pursued widely to reduce dependence on fossil fuels. The aim of this study is to assess the impact of battery storage on the economics of hybrid wind‐diesel power systems in commercial applications by analyzing wind‐speed data of Dhahran, East‐Coast, Kingdom of Saudi Arabia (K.S.A.). The annual load of a typical commercial building is 620,000 kWh. The monthly average wind speeds range from 3.3 to 5.6 m/s. The hybrid systems simulated consist of different combinations of 100‐kW commercial wind machines (CWMs) supplemented with battery storage and diesel generators. National Renewable Energy Laboratory's (NREL's) (HOMER Energy's) Hybrid Optimization Model for Electric Renewables (HOMER) software has been employed to perform the economic analysis. The simulation results indicate that for a hybrid system comprising of 100‐kW wind capacity together with 175‐kW diesel system and a battery storage of 4 h of autonomy (i.e. 4 h of average load), the wind penetration (at 37‐m hub height, with 0% annual capacity shortage) is 25%. The cost of generating energy (COE, $/kWh) from this hybrid wind–battery–diesel system has been found to be 0.139 $/kWh (assuming diesel fuel price of 0.1$/L). The investigation examines the effect of wind/battery penetration on: COE, operational hours of diesel gensets. Emphasis has also been placed on un‐met load, excess electricity, fuel savings and reduction in carbon emissions (for wind–diesel without battery storage, wind–diesel with storage, as compared to diesel‐only situation), cost of wind–battery–diesel systems, COE of different hybrid systems, etc. The study addresses benefits of incorporation of short‐term battery storage (in wind–diesel systems) in terms of fuel savings, diesel operation time, carbon emissions, and excess energy. The percentage fuel savings by using above hybrid system is 27% as compared to diesel‐only situation Copyright © 2012 John Wiley & Sons, Ltd.     

The utility of energy storage to improve the economics of wind–diesel power plants in Canada

Wind energy systems have been considered for Canada's remote communities in order to reduce their costs and dependence on diesel fuel to generate electricity. Given the high capital costs, low-penetration wind–diesel systems have been typically found not to be economic. High-penetration wind–diesel systems have the benefit of increased economies of scale, and displacing significant amounts of diesel fuel, but have the disadvantage of not being able to capture all of the electricity that is generated when the wind turbines operate at rated capacity.Two representative models of typical remote Canadian communities were created using HOMER, an NREL micro-power simulator to model how a generic energy storage system could help improve the economics of a high-penetration wind–diesel system. Key variables that affect the optimum system are average annual wind speed, cost of diesel fuel, installed cost of storage and a storage systems overall efficiency. At an avoided cost of diesel fuel of 0.30 $Cdn/kWh and current installed costs, wind generators are suitable in remote Canadian communities only when an average annual wind speed of at least 6.0 m/s is present. Wind energy storage systems become viable to consider when average annual wind speeds approach 7.0 m/s, if the installed cost of the storage system is less than 1000 $Cdn/kW and it is capable of achieving at least a 75% overall energy conversion efficiency. In such cases, energy storage system can enable an additional 50% of electricity from wind turbines to be delivered.     

Economic analysis of PV/diesel hybrid system with flywheel energy storage

This paper analyzes a hybrid energy system performance with photovoltaic (PV) and diesel systems as the energy sources. The hybrid energy system is equipped with flywheel to store excess energy from the PV. HOMER software was employed to study the economic and environmental benefits of the system with flywheels energy storage for Makkah, Saudi Arabia. The analysis focused on the impact of utilizing flywheel on power generation, energy cost, and net present cost for certain configurations of hybrid system. Analyses on fuel consumption and carbon emission reductions for the system configurations were also presented in this paper.     

Techno-economical analysis of off-grid hybrid systems at Kutubdia Island,Bangladesh

Kutubdia is an island in the southern coast of Bangladesh where mainland grid electricity is not present or would not feasible in near future. Presently, electricity is generated using a diesel generator by Bangladesh Power Development Board (BPDB) for a limited time and location. Due to its remote location, the fuel cost in Kutubdia is very expensive. In the present study one-year recorded wind by Bangladesh Centre of Advanced Studies (BCAS) location and other three potential locations for hybrid system analysis is discussed. The system configuration of the hybrid is achieved based on a theoretical domestic load at the island. The sizing of the hybrid power systems is discussed with 0% and 5% annual capacity of shortage. This feasibility study indicates that wind–PV–diesel system is feasible with 0% capacity of shortage and wind–diesel system is feasible with 5% annual capacity of shortage at all locations. As 5% annual capacity of shortage can be considered, the wind–diesel hybrid system will reduce net present cost as well as cost of energy to about 20% and the diesel consumption on the island can be reduced to about 50% of its present annual consumption. Such a hybrid system will reduce about 44% green house gases (GHG) from the local atmosphere.     

An investigation of variable speed operation of diesel generators in hybrid energy systems

This paper provides a preliminary assessment of the performance and economic potential of a hybrid energy system (wind/diesel) power system which includes a variable speed diesel generator. Recent development in power electronics would be utilized to allow asynchronous operation of the diesel generator, while simultaneously delivering constant frequency electric power to the local electrical grid. In addition to the variable speed diesel, the system can include wind and/or solar electric sources. A hybrid energy system model recently developed at the University of Massachusetts is used to simulate this system configuration and other more conventional wind/diesel hybrid energy systems. Experimental data from a series of variable speed diesel generator tests were used to generate a series of fuel consumption curves used in the analytical model. In addition to performance (fuel savings) comparisons for fixed and variable speed systems, economic cost of energy calculations for the various system designs are presented. It is shown that the proposed system could offer both performance and economic advantages.     

Study and design of a hybrid wind–diesel-compressed air energy storage system for remote areas

Remote areas around the world predominantly rely on diesel-powered generators for their electricity supply, a relatively expensive and inefficient technology that is responsible for the emission of 1.2 million tons of greenhouse gas (GHG) annually, only in Canada [1]. Wind–diesel hybrid systems (WDS) with various penetration rates have been experimented to reduce diesel consumption of the generators. After having experimented wind–diesel hybrid systems (WDS) that used various penetration rates, we turned our focus to that the re-engineering of existing diesel power plants can be achieved most efficiently, in terms of cost and diesel consumption, through the introduction of high penetration wind systems combined with compressed air energy storage (CAES). This article compares the available technical alternatives to supercharge the diesel that was used in this high penetration wind–diesel system with compressed air storage (WDCAS), in order to identify the one that optimizes its cost and performances. The technical characteristics and performances of the best candidate technology are subsequently assessed at different working regimes in order to evaluate the varying effects on the system. Finally, a specific WDCAS system with diesel engine downsizing is explored. This proposed design, that requires the repowering of existing facilities, leads to heightened diesel power output, increased engine lifetime and efficiency and to the reduction of fuel consumption and GHG emissions, in addition to savings on maintenance and replacement cost.     

Pre-feasibility study of stand-alone hybrid energy systems for applications in Newfoundland

A potential solution for stand-alone power generation is to use a hybrid energy system in parallel with some hydrogen energy storage. In this paper, a pre-feasibility study of using hybrid energy systems with hydrogen as an energy carrier for applications in Newfoundland, Canada is explained. Various renewable and non-renewable energy sources, energy storage methods and their applicability in terms of cost and performance are discussed. HOMER is used as a sizing and optimization tool. Sensitivity analysis with wind speed data, solar radiation level, diesel price and fuel cell cost was done. A remote house having an energy consumption of 25 kW h/d with a 4.73 kW peak power demand was considered as the stand-alone load. It was found that, a wind–diesel–battery hybrid system is the most suitable solution at present. However, with a reduction of fuel cell cost to 15% of its current value, a wind–fuel cell system would become a superior choice. Validity of such projection and economics against conventional power sources were identified. Sizing, performance and various cost indices were also analyzed in this paper.     

Integrated standalone hybrid solar PV,fuel cell and diesel generator power system for battery or supercapacitor storage systems in Khorfakkan,United Arab Emirates

Renewable energy resources play a very important rule these days to assist the conventional energy systems for doing its function in the UAE due to high greenhouse gas (GHG) emissions and energy demand. In this paper, the analysis and performance of integrated standalone hybrid solar PV, fuel cell and diesel generator power system with battery energy storage system (BESS) or supercapacitor energy storage system (SCESS) in Khorfakkan city, Sharjah were presented. HOMER Pro software was used to model and simulate the hybrid energy system (HES) based on the daily energy consumption for Khorfakkan city. The simulation results show that using SCESS as an energy storage system will help the performance of HES based on the Levelized cost of energy (LCOE) and greenhouse gas (GHG) emissions. The HES with SCESS has renewable fraction (68.1%) and 0.346 $/kWh LCOE. The HES meets the annual AC primary load of the city (13.6 GWh) with negligible electricity excess and with an unmet electrical load of 1.38%. The reduction in GHG emissions for HES with SCESS was 83.2%, equivalent to saving 814,428 gallons of diesel.     

Performance investigation of a hybrid PV‐diesel power system for remote areas

Algeria is in a region with an enormous potential of solar energy for power generation. However, photovoltaic (PV) power plants have not yet been developed sufficiently in the country, and its applications such as PV pumping, solar distillation, and solar heating. The main problem is the high maintenance, operating costs, fossil‐fuel transportation, and CO₂ emission of Bordj Badji Mokhtar's (BBM's) diesel power plant that exhibits a noteworthy issue in south Algeria. This paper presents the results of a theoretical and experimental study for PV/diesel hybrid energy system (HES) considering the load demand profile and the solar radiation in isolated area of south Algeria. Suggested hybridization based on a renewable energy with a view to an improved environment is promising. Study results show the performance of PV/diesel system based on solar radiation. The experiment load curve in this typical area may conduct the diesel generator to operate at 60% to 70% of its nominal power with less fuel consumption, and it has been verified during this study that the implementation of a PV/diesel hybrid system is efficient for higher load and higher solar radiation. Results and discussions are encouraging considering less emission of greenhouse gases and less storage of fuel, which drives the government to draw a political arrangement for the improvement of cleaner forms of electricity generation.     

Performance analysis of hybrid photovoltaic/diesel energy system under Malaysian conditions

Standalone diesel generating system utilized in remote areas has long been practiced in Malaysia. Due to highly fluctuating diesel price, such a system is seemed to be uneconomical, especially in the long run if the supply of electricity for rural areas solely depends on such diesel generating system. This paper would analyze the potential use of hybrid photovoltaic (PV)/diesel energy system in remote locations. National Renewable Energy Laboratory’s (NREL) HOMER software was used to perform the techno-economic feasibility of hybrid PV/diesel energy system. The investigation demonstrated the impact of PV penetration and battery storage on energy production, cost of energy and number of operational hours of diesel generators for the given hybrid configurations. Emphasis has also been placed on percentage fuel savings and reduction in carbon emissions of different hybrid systems. At the end of this paper, suitability of utilizing hybrid PV/diesel energy system over standalone diesel system would be discussed mainly based on different solar irradiances and diesel prices.     

Dual-fuelling of an industrial indirect injection diesel engine by diesel and liquid petroleum gas

For partial substitution of conventional diesel fuel with liquified-petroleum gas (LPG) fuel, in an indirect-injection, (IDI) diesel engine, the so-called ‘mixed diesel gas’ approach has been applied. For this purpose, a carburetted LPG fuel system has been designed and fitted on the inlet manifold of the engine. Extensive performance tests have been carried out at full load conditions of both the pure diesel and diesel-LPG engines. The results show that, at the rated speed, and at equal power of both engines, increasing the LPG proportion in the dual fuel decreases specific fuel consumption, exhaust gas temperature and black smoke but increase pollutants such as UHC and CO, cylinder peak pressure and the rate of pressure rise.     

An integrated model for performance simulation of hybrid wind–diesel systems

Stand-alone hybrid systems have turned into one of the most promising ways to handle the electrification requirements of numerous isolated consumers worldwide. The proposed wind–diesel–battery hybrid system consists of a micro-wind converter, a small diesel-electric generator—basically operating as a back up energy production system—and a lead-acid battery bank that stores the wind energy surplus during high wind speed periods. In this context the present work is focused on presenting a detailed mathematical model describing the operational behavior of the basic hybrid system components, along with the representative calculation results based on the developed mathematical model. Accordingly, an integrated numerical algorithm is built to estimate the energy autonomy configuration of the hybrid system under investigation. Using the proposed numerical algorithm, the optimum configuration selection procedure is verified by carrying out an appropriate sensitivity analysis. The proposed methodology may equally well be applied to any other remote consumer and wind potential type, in order to estimate the optimum wind–diesel hybrid system configuration that guarantees long-term energy autonomy.     

Wind diesel design and the role of short term flywheel energy storage

Wind diesel hybrid systems can often provide a cost effective solution to electricity supply in many rural and grid remote applications. The potential market for such stand alone systems is vast. The sizing and design of these systems to suite a given application is non-trivial. Design principles for wind diesel systems are presented with stress placed on the role of short term energy storage. It is shown that flywheels are the most appropriate form of energy storage. A user-friendly software package to help engineers design wind diesel systems has been developed over the last three years with support from the CEC's JOULE programme. The modelling and software development was undertaken cooperatively by several EEC and EFTA countries. An brief introduction to the software, which models both logistic and dynamic aspects of system operation, is provided and there is a discussion of its validation.     

The performance of a remote wind–diesel power system

The collection and analysis of 6 months of continuously recorded field data from a small remote wind–diesel power system at a coastal farm site is reported. The power system and the data acquisition unit are described and the performance characteristics of the major components discussed. Analysis of the field data has led to a number of recommendations for possible improvement in component sizing and control strategy. The siting of the turbine is excellent by international standards and the annual wind energy produced is greater than the demand. However, almost a fifth of the wind energy generated has to be dumped due to the short-term oversupply of power and over one-quarter of the total energy supplied still comes from the diesel generator as a result of transient energy deficits. An operational strategy that can deal with this paradox of alternating supply and demand excesses could lead to further operational improvements.     

直流配网型混合动力系统在车客渡船上的应用

针对车客渡船动力负荷切换频繁,传统柴油机推进油耗高、排放和噪声大的问题,提出一种基于变速发电机组和超级电容储能装置的直流配网型混合动力系统。目前系统已成功应用于“江苏路渡3011”轮,实船运行数据显示:该混合动力系统不仅能达到较好的节油效果、降低排放,更在操控性、舒适性上优于传统的柴油机推进模式。     

Optimal sizing study of hybrid wind/PV/diesel power generation unit

In this paper, a methodology of sizing optimization of a stand-alone hybrid wind/PV/diesel energy system is presented. This approach makes use of a deterministic algorithm to suggest, among a list of commercially available system devices, the optimal number and type of units ensuring that the total cost of the system is minimized while guaranteeing the availability of the energy. The collection of 6 months of data of wind speed, solar radiation and ambient temperature recorded for every hour of the day were used. The mathematical modeling of the main elements of the hybrid wind/PV/diesel system is exposed showing the more relevant sizing variables. A deterministic algorithm is used to minimize the total cost of the system while guaranteeing the satisfaction of the load demand. A comparison between the total cost of the hybrid wind/PV/diesel energy system with batteries and the hybrid wind/PV/diesel energy system without batteries is presented.The reached results demonstrate the practical utility of the used sizing methodology and show the influence of the battery storage on the total cost of the hybrid system.     

Size and power exchange optimization of a grid-connected diesel generator-photovoltaic-fuel cell hybrid energy system considering reliability,cost and renewability

In this paper, optimal size and power exchange of a grid-connected diesel generator-photovoltaic-fuel cell (diesel/PV/FC) hybrid energy system is investigated by multi-objective optimization for a community in Kerman, Iran. To optimally size hybrid system, number of system components (PV panels, diesel generators, electrolysers, FCs and hydrogen tanks) are considered as decision variables. In this paper, to optimize power exchange between the hybrid system and grid, two other decision variables are introduced: selling coefficient and purchase coefficient. Selling and purchase coefficients are defined to optimize the amount of electricity sold to the grid and the amount of electricity purchased from the grid, respectively. In order to optimally design the hybrid system, multi-objective optimization has been considered with respect to three objectives: levelized cost of energy (LCOE), loss of power supply probability (LPSP) and renewability. Based on simulation results, it can be drawn that when the hybrid system can sell/buy energy to/from the grid, (1) by decreasing non-renewable energy source usage, the value of LPSP increases, (2) by decrease of non-renewable energy usage, value of LCOE increases and (3) using FC system leads to increasing LCOE.     

Economic analysis and optimal design of hydrogen/diesel backup system to improve energy hubs providing the demands of sport complexes

Energy crisis has led the communities around the world to use energy hubs. These energy hubs usually consist of photovoltics, wind turbines and batteries. Diesel generators are usually used in these systems as backup system. In this research, for the first time, an attempt is made to replace the traditional diesel only backup system with hydrogen only system and combined hydrogen and diesel backup system in hybrid photovoltaic and wind turbine energy systems. After introducing the available energy modeling tools and methods, explaining over advantages and disadvantages of each one, HOMER software was selected for this research. The simulations of this research show that using the traditional diesel generator as the backup system of the energy hub, creates a low cost system with the net present cost (NPC) of 2.5 M$ but also produces the highest amount carbon emission which is equal to 686 tons/year. The results of this study also indicate the hybrid renewable energy system which is supported by the hydrogen only backup system has the highest net present cost (NPC) and initial capital cost but reduces the maximum amount of carbon. The calculated NPC and carbon production of the energy hub using hydrogen only backup system are equal to 4.39 M$ and 55,205, respectively. On the other hand, the combined hydrogen/diesel backup system has reduced NPC compared with the hydrogen only backup system. The CO₂ production of this system is also lower than the diesel only backup system. The calculations indicate that the NPC and CO₂ production of the combined backup system are 3.53 M$ and 511,695 kg/yr. By comparing advantages and disadvantages of all 3 scenarios, the micro grid which uses the combined diesel/hydrogen backup system is selected as the most optimal system. The sensitivity analysis of the selected system shows that fluctuations of inflation rate along with the fluctuations of both fuel cells and electrolyzers capital cost do not affect the net present cost (NPC) considerably. On the other hand, fluctuations of capital cost of the main components like wind turbines affect the NPC much more than the others. If the inflation rate drops from 15% to 14% and wind turbine capital cost multiplier reduces from 1 to 0.8, the NPC value will drop by the value of 300,000 $.