共查询到18条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
介绍了COM组件和专家系统等相关技术,并给出了专家系统结构模型,研究用COM技术来实现专家系统的组件,并阐述了关键组件的实现方法。 相似文献
5.
通过分析COM组件的特点,引入了基于COM组件的参数化设计开发思想,总结出了在UG/Open中应用COM组件进行参数化设计的方法,并以花键轴参数化设计为例,阐述了应用UG/Open进行参数化设计COM组件开发的一般步骤,为在UG平台上进行CAD系统开发提供参考。 相似文献
6.
7.
8.
基于ASP的齿轮设计计算COM组件设计及应用 总被引:3,自引:0,他引:3
根据COM组件的特点,提出了基于ASP的齿轮设计计算COM组件设计的关键技术和实现方法,并应用COM组件技术开发了一个基于网络的直齿圆柱齿轮设计系统。该开发实例验证了所提出的方法的有效性和正确性,为机械产品设计的信息化、网络化提供了一种实现模式。 相似文献
9.
10.
11.
12.
13.
一种新体系结构的开放式软CNC的设计 总被引:8,自引:2,他引:8
在分析数控系统开放性基础上,给出了一种可重构、可扩充的开放式软CNC的实现机制。该系统基于WinNT RTX实时扩展系统,软件设计采用了新的三层结构,面向最终用户,体系结构完全开放。系统可整体重构,便于升级。用户通过编制组件对象模型程序和实时动态链接库程序,可以方便地扩充用户专用指令。 相似文献
14.
15.
基于组件的开放结构数控系统 总被引:11,自引:0,他引:11
提出并实现了一种模块化、可重构、可互换和可裁减的开放式数控系统结构,为快速定制和开发数控系统提供了一个软件结构和环境,该结构结合了通用PC、RTLinux和实时组件的优点。在分析现有组件标准不能应用于数控系统的原因的基础上,给出一种可用于数控系统的组件模型。介绍了由该模型实现的开放结构数控系统的基本组成成分,以及组成一个基本数控系统组件的功能、接口和图形表示。详述了该系统的虚拟模块系统和配置系统,虚拟模块系统主要实现数控系统模块间通信和模块的调度,配置系统主要实现数控系统的集成。给出了该组件的实现框架,并在RTLinux上实现了该结构的原型系统。 相似文献
16.
设计了以AT89C52单片机为核心的数控砂轮修形系统控制器,通过单片机的串行口连接U盘读写模块及U盘,并读取加工程序,按照一定的控制算法实现对砂轮修形器的控制。该系统结构精简,成本较低,可应用于磨齿机上对砂轮的数控修形。 相似文献
17.
WANG Yongzhang LIU Tao FU Hongya HAN Zhenyu School of Mechanical Electrical Engineering Harbin Institute of Technology Harbin China 《机械工程学报(英文版)》2007,20(2):13-16
Aiming at the characteristics of modularity and reconfigurable in open architecture com-puter numerical control (CNC) system,the open architecture CNC system,Harbin Institute of Tech-nology computer numerical control (HITCNC),is researched and manufactured based on the interface standards. The system’s external interfaces are coincident with the corresponding international stan-dards,and the internal interfaces follow the open modular architecture controller (OMAC) agreement. In the research and manufacturing process,object-oriented technology is used to ensure the openness of the HITCNC,and static programming is applied in the CNC system according to the idea of modu-larization disassembly. The HITCNC also actualizes real-time and unreal-time modules adopting real-time dynamical linked library (RTDLL) and component object model (COM). Finite state ma-chine (FSM) is adopted to do dynamically modeling of HITCNC. The complete separation between the software and the hardware is achieved in the HITCNC by applying the SoftSERCANS technique. The application of the above key techniques decreases the programming workload greatly,and uses software programs replacing hardware functions,which offers plenty technique ensures for the open-ness of HITCNC. Finally,based on the HITCNC,a three-dimensional milling system is established. On the system,series experiments are done to validate the expandability and interchangeability of HITCNC. The results of the experiments show that the established open architecture CNC system HITCNC is correct and feasible,and has good openness. 相似文献