Synthesis and Characterization of Lanthanum Oxide Nanoparticles from Thermolysis of Nano-sized Lanthanum(III) Supramolecule as a Novel Precursor

A new nano-sized La(III) supramolecular compound, [pyda.H]₂[La₂(pydc)₄(H₂O)₄]·2H₂O (1), where [pyda.H]⁺ = 2,6-diaminopyridinium, and [pydc]^2? = 2,6-pyridinedicarboxylate, was synthesized by the sonochemical method and characterized by field emission scanning electron microscope (FESEM), X-ray powder diffraction (XRD) and elemental analyses. Lanthanum oxide nanoparticles were prepared by direct thermal decomposition of 1 nanostructures in a programmable furnace up to 800 °C in ambient atmosphere. The structural characterization was performed by powder XRD; and, morphological observations by FESEM revealed that the quasi-spherical La₂O₃ nanoparticles obtained are well crystallized and uniform in both morphology and particle size. The study demonstrates that supramolecular compounds may be suitable precursors for the simple one-pot preparation of nanoscale metal oxide materials with different morphologies.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Simple One-Pot Preparation of In<Subscript>2</Subscript>O<Subscript>3</Subscript> Nano-particles Using a Supramolecular 3D Framework Polymer

An indium(III) three-dimensional coordination framework, [In₂(OH)₃(O₄C₈H₄)_1.5] _n (1), was synthesized by hydrothermal method and characterized by elemental analyses, X-ray powder diffraction (XRD) and IR spectroscopy. Indium(III) oxide nanoparticles was prepared by direct thermal decomposition of 1 at 450 °C in air. The indium(III) oxide nanoparticles were characterized by scanning electron microscopy, X-ray powder diffraction (XRD) and energy-dispersive X-ray analysis (EDAX). This study demonstrates the coordination polymer frameworks may be suitable precursors for a simple one-pot preparation of nanoscale metal oxide materials with different and interesting morphologies.     

Quasi-crystalline Al<Subscript>70</Subscript>Cu<Subscript>20</Subscript>Fe<Subscript>10</Subscript> by thermal explosion: Effect of AlCu doping on magnetic properties

Polycrystalline quasi-crystals of icosahedral Al₇₀Cu₂₀Fe₁₀(i-Al₇₀Cu₂₀Fe₁₀) were prepared by thermal explosion (TE) of mechanically activated mixture of Al, Cu, Fe powders doped with AlCu. The effect of AlCu dopant was studied by XRD, field emission scanning electron (FESEM), optical microscopy (OM), atomic emission spectroscopy (AES), and energy-dispersive X-ray microanalysis (EDX). The synthesized i-Al₇₀Cu₂₀Fe₁₀ and intermetallics (Al₃Fe, Al₂Cu) show soft ferromagnetic and paramagnetic properties, respectively.      

Catalytic Wet Oxidation of H<Subscript>2</Subscript>S to Sulfur on V/MgO Catalyst

The V/MgO catalysts with different V₂O₅ loadings were prepared by impregnating MgO with aqueous vanadyl sulfate solution. All of the catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). It was observed that the H₂S removal capacity with respect to vanadia content increased up to 6 wt%, and then decreased with further increase in vanadia loading. The prepared catalysts had BET surface areas of 11.3 ~ 95.9 m²/g and surface coverages of V₂O₅ of 0.1 ~ 2.97. The surface coverage calculation of V₂O₅ suggested that a vanadia addition up to a monomolecular layer on MgO support increased the H₂S removal capacity of V/MgO, but the further increase of VO _x surface coverage rather decreased that. Raman spectroscopy showed that the small domains of Mg₃(VO₄)₂ could be present on V/MgO with less than 6 wt% vanadia loading. The crystallites of bulk Mg₃(VO₄)₂ and Mg₂(V₂O₇) became evident on V/MgO catalysts with vanadia loading above 15 wt%, which were confirmed by a XRD. The TPR experiments showed that V/MgO catalysts with the loading below 6 wt% V₂O₅ were more reducible than those above 15 wt% V₂O₅. It indicated that tetrahedrally coordinated V⁵⁺ in well-dispersed Mg₃(VO₄)₂ domains could be the active species in the H₂S wet oxidation. The XPS studies indicated that the H₂S oxidation with V/MgO could proceed from the redox mechanism (V⁵⁺ V⁴⁺) and that V³⁺ formation, deep reduction, was responsible for the deactivation of V/MgO.     

The catalyzing carbonization properties of acrylonitrile-butadiene-styrene copolymer (ABS)/rare earth oxide (La<Subscript>2</Subscript>O<Subscript>3</Subscript>)/organophilic montmorillonite(OMT) nanocomposites

The catalyzing carbonization properties of acrylonitrile-butadiene-styrene copolymer (ABS) /rare earth oxide (La₂O₃) /organophilic montmorillonite(OMT) nanocomposites have been studied. X-ray diffraction (XRD), transmission electron microscopy (TEM),thermogravimetric analyses (TGA), laser raman spectroscopy (LSR) and high-resolution electron microscopy (HRTEM) are used to characterize the morphology and properties of the nanocomposites. The results show that intercalated nanocomposites have formed no matter with or without La₂O₃, and nanocomposites have better thermal stability with high charred residue, especially at the presence of La₂O_3. With the addition of 3wt%La₂O₃, the char residue yield of ABS/5wt% OMT can be up to 12.6wt% in comparison to 2.4wt% of pure ABS. The LSR and HRTEM are carried out to investigate the structure of the purified char residue of ABS/5wt%OMT/3wt%La₂O₃, and demonstrate the formation of the graphite structure. The possible catalyzing carbonization mechanism is discussed in this paper.     

Synthesis and Characterization of Superparamagnetic NiBaO<Subscript>2</Subscript> Nano-Oxide Using Novel Precursor Complex [Ba(H<Subscript>2</Subscript>O)<Subscript>8</Subscript>][Ni(dipic)<Subscript>2</Subscript>]

In this paper, for the first time, synthesis of [Ba(H₂O)₈][Ni(dipic)₂] complex and preparation of NiBaO₂ nano-oxide are reported through thermal decomposition under surfactant free condition. This novel complex was characterized by Fourier transform infrared spectroscopy (FT-IR), ultra violet–visible spectroscopy, conductivity measurement and elemental analysis. Formation of novel nanoparticles was supported by FT-IR and energy-dispersive X-ray spectroscopy and the orthorhombic structure of nanocrystals was confirmed by powder X-ray diffraction analysis. In addition, size distribution as well as uniform morphology of prepared nano-oxide were recorded by dynamic light scattering analysis and field-emission scanning electron microscopy, respectively. Magnetic features measured by vibrating sample magnetometer, illustrate superparamagnetic behavior of the oxide.     

Synthesis,characterization and electrical properties of polypyrrole/V<Subscript>2</Subscript>O<Subscript>5</Subscript> composites

Polypyrrole (PPy) and its composites with vanadium pentoxide (V₂O₅) were synthesized in aqueous medium by chemical oxidation polymerization using FeCl₃·6H₂O as an oxidant. The materials were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffractometry (XRD), thermogravimetry analyzer (TGA), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), UV/visible spectroscopic techniques and LCR-meter. The FT-IR results confirmed the successful synthesis of PPy and PPy/V₂O₅ composites. The XRD study showed the amorphous and crystalline nature of PPy and PPy/V₂O₅ composites, respectively. The TGA analysis showed slight increase in the thermal stability of the composites. The SEM data verified the porous nature of PPy and the composites. The UV/visible spectrometry confirmed the doping of PPy in composites. The electrical properties of the materials displayed their semiconducting nature. The resistance of the samples was found to be dependent on temperature and the contents of V₂O₅ in the composites.     

Modification of Cu/Zn/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst by Activated Carbon Based Metal Organic Frameworks as Precursor for Hydrogen Production

In this study, Cu/Zn/Al₂O₃-AC (AC?=?activated carbon) catalyst was synthesized and evaluated for dimethoxymethane (DMM) reformation to hydrogen. The Cu/Zn/Al₂O₃-AC catalyst was prepared using high surface area metal organic frameworks (MOFs) consisting of Cu₃(BTC)₂ (MOF-199) and Zn₄O(BDC)₃ (MOF-5) for Cu(II) and Zn(II) sources respectively, as precursors while γ-Al₂O₃ was applied as support. The synthesized catalyst was investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Brunauer–Emmett–Teller analysis (BET), Temperature programmed desorption (NH₃-TPD) and Energy-dispersive X-ray spectroscopy (EDX) techniques. Complete DMM conversion was observed over Cu/Zn/Al₂O₃-AC catalyst (Cu:Zn:Al mole ratio of 6:3:2) under atmospheric pressure, T?=?533 K, GHSV?=?20 NL h^?1 g_cat^?1, N₂/H₂O/DMM?=?24/5/1 volume percent (vol%) with hydrogen productivity of 12.8 L H₂ h^?1 g_cat^?1 and 64% hydrogen concentration. Application of MOFs as precursors and modified activated carbon as an acidic component provided the catalyst with the porous structure and high specific surface area for the hydrolysis of DMM, subsequently, high selectivity and productivity of hydrogen was obtained.     

Structure and properties of solid solutions of La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Pr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>BaCuFeO<Subscript>5 + δ</Subscript>

The effect of replacing lanthanum with praseodymium on the crystal chemistry parameters of solid solutions of La_{1 − x} Pr _x BaCuFeO_{5 + δ} has been investigated using X-ray powder diffraction analysis and IR spectroscopy. The thermal expansion, electroconductivity, and thermopower of these phases have been studied in air in the temperature range 300–1100 K. The values of linear thermal expansion coefficients (LTEC) of ceramics in different temperature ranges have been determined, and the values of electric transfer parameters in the above oxides have been calculated. It has been established that replacing lanthanum with praseodymium resulted in the compression of the elementary oxide unit La_{1 − x} Pr _x BaCuFeO_{5 + δ}, decrease in the content of labile oxygen in them (δ), decrease in nonmonotonic electroconductivity, increase in thermopower, decrease in LTEC, and difficulties in charge transfer in these phases.     

Enhanced cyclic stability of CO<Subscript>2</Subscript> adsorption capacity of CaO-based sorbents using La<Subscript>2</Subscript>O<Subscript>3</Subscript> or Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript> as additives

To improve the stability of CaO adsorption capacity for CO₂ capture during multiple carbonation/calcination cycles, modified CaO-based sorbents were synthesized by sol-gel-combustion-synthesis (SGCS) method and wet physical mixing method, respectively, to overcome the problem of loss-in-capacity of CaO-based sorbents. The cyclic CaO adsorption capacity of the sorbents as well as the effect of the addition of La₂O₃ or Ca₁₂Al₁₄O₃₃ was investigated in a fixed-bed reactor. The transient phase change and microstructure were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FSEM), respectively. The experimental results indicate that La₂O₃ played an active role in the carbonation/calcination reactions. When the sorbents were made by wet physical mixing method, CaO/Ca₁₂Al₁₄O₃₃ was much better than CaO/La₂O₃ in cyclic CO₂ capture performance. When the sorbents were made by SGCS method, the synthetic CaO/La₂O₃ sorbent provided the best performance of a carbonation conversion of up to 93% and an adsorption capacity of up to 0.58 g-CO₂/g-sorbent after 11 cycles.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript>@TiO<Subscript>2</Subscript>-OSO<Subscript>3</Subscript>H: an efficient hierarchical nanocatalyst for the organic quinazolines syntheses

A sulfonic acid functionalized titanium dioxide quasi-superparamagnetic nanocatalyst Fe₃O₄@SiO₂@TiO₂-OSO₃H with average size of 61 nm and semispherical shape with surface area about 97 m² g^?1 with saturation magnetization 17.7 emu g^?1 and the coercivity 9.84 Oe was successfully synthesized. The structure and morphology of the nanocatalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy, X-ray diffraction pattern, transmission electron microscopy, field-emission scanning electron microscopy, vibrating sample magnetometer and Brunauer–Emmett–Teller surface area analysis. The catalytic usage of the nanocatalyst was exemplified in synthesis of 2,3-dihydroquinazolin-4(1H)-one and spiroquinazolin-4(3H)-one derivatives in deep eutectic solvents (DESs) based on choline chloride and urea. We suggest that the synergistic effects in catalytic activities of titanium dioxide, organic acid and the CO₂ capture property of DES are the main reasons for the improvement of catalytic activity. The synthesized spiroquinazolinones and dihydroquinazolinones derivatives were characterized by FT-IR, ¹H and ¹³C nuclear magnetic resonance spectroscopy. The magnetic nanocatalyst exhibit high catalytic activity and can be simply separated from reaction media by an external magnet in a few seconds and could be reused for six cycles without significant loos in activity, which indicates the good immobilization of sulfonic acid on the magnetic titanium dioxide support. Furthermore, the solvent which has been used in this work can be readily isolated and reused for several times.     

CeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript>/ZSM-5 sorbents for high-temperature H<Subscript>2</Subscript>S removal

Performance of CeO₂-La₂O₃/ZSM-5 sorbents for sulfur removal was examined at temperature ranging from 500 oC to 700 oC. The sulfur capacity of 5Ce5La/ZSM-5 was much bigger than that of CeO₂/ZSM-5. H₂ had a negative impact on the sulfidation; however, CO had little influence on sulfur removal. The characterization results showed that CeO₂ and La₂O₃ were well dispersed on ZSM-5 because of the intimate admixing of La₂O₃ and CeO₂, the major sulfidation products were Ce₂O₂S and La₂O₂S, the XRD and SEM results revealed that ZSM-5 structure could remain intact during preparation and sulfidation process, the H₂-TPR showed that the reducibility of CeO₂ can be remarkably enhanced by addition of La.     

Mg(OH)<Subscript>2</Subscript> Films Prepared by Ink-Jet Printing and Their Photocatalytic Activity in CO<Subscript>2</Subscript> Reduction and H<Subscript>2</Subscript>O Conversion

Mg(OH)₂ films on Al substrates were fabricated by ink-jet printing, and they were applied as photocatalysts in solar fuels production (H₂ and CH₃OH) from CO₂ and H₂O conversion. The films were fabricated by means of a deposition of a solution composed of magnesium complex nanoparticles over aluminum foils, which were submitted to a heat treatment to promote the crystallization of Mg(OH)₂. The films were characterized by razing incidence X-ray diffraction (GZXD), Fourier-transform infrared spectroscopy (FTIR), Scanning electronic microscopy, X-ray photoelectron spectroscopy (XPS), and N₂ physisorption by BET method. The Mg(OH)₂ was detected in all the samples synthesized with 1 to 40 layers. According to XPS and FTIR analysis, it was detected the presence of carbonates related to Mg₃O(CO₃)₂ and Al⁰ and Al³⁺ due to the substrate. The highest photocatalytic activity was reached using 30 layers of Mg(OH)₂ for H₂ and CH₃OH generation, which it was 268 and 15 µmol g^??1h^??1, respectively. These results were associated to the presence of adequate amounts of MgO and Al₂O₃ that promote an efficient transfer of the photogenerated electrons between them. Furthermore, the formation of porous structures with high surface area and relative high roughness promoted an increase in the mass transport between the gas and liquid phase, which increase the effectiveness of the photocatalysts.     

Enhancement of NO absorption in ammonium-based solution using heterogeneous Fenton reaction at low H<Subscript>2</Subscript>O<Subscript>2</Subscript> consumption

A novel NO removal system is designed, where NO is initially oxidized by ?OH radicals from the decomposition of hydrogen peroxide (H₂O₂) over hematite and then absorbed by ammonium-based solution. According to the high performance liquid chromatography (HPLC) profile and the isopropanol injection experiments, the ?OH radicals are proved to play a critical role in NO removal. The NO removal efficiency primarily depends on H₂O₂ concentration, gas hourly space velocity (GHSV), H₂O₂ feeding rate and reaction temperature, while the flue gas temperature slightly affects the NO removal efficiency. The low H₂O₂ consumption makes this system a promising technique in NO removal process using wet-method. The evolution of catalyst in reaction is analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), Fourier Transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The nitrite ion and nitrate ion in aqueous solution are detected by the continuous phase flow analyzer. Finally, the macrokinetic parameters of the NO oxidation are obtained by using the initial rate method.     

Selective oxidation of H<Subscript>2</Subscript>S to sulfur over CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> catalyst

The catalytic oxidation of hydrogen sulfide (H₂S) to elemental sulfur was studied over CeO₂-TiO₂ catalysts. The synthesized catalysts were characterized by various techniques such as X-ray diffraction, BET, X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of ammonia, and scanning electron microscopy (SEM). Catalytic performance studies of the CeO₂-TiO₂ catalysts showed that H₂S was successfully converted to elemental sulfur without considerable emission of sulfur dioxide. CeO₂-TiO₂ catalysts with Ce/Ti=1/5 and 1/3 exhibited the highest H₂S conversion, possibly due to the uniform dispersion of metal oxides, high surface area, and high amount of acid sites.     

Mercury ion adsorption on AC@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-NH<Subscript>2</Subscript>-COOH from saline solutions: Experimental studies and artificial neural network modeling

An efficient, novel functionalized supported magnetic nanoparticle (AC@Fe₃O₄-NH₂-COOH) has been synthesized by co-precipitation method for removal of mercury ions from saline solutions. High dispersed supported magnetic nanoparticles with particle sizes less than 30 nm were formed over activated carbon derived from local walnut shell. Surface characterizations of supported magnetic nanoparticles were evaluated by Boehm test, Brunauer- Emmett-Teller (BET) surface area, X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and X-ray fluorescence (XRF). A three-layer artificial neural network (ANN) code was developed to predict the Hg (II) ions removal from aqueous solution by AC@Fe₃O₄-NH₂-COOH. The three-layer back-propagation (BP) is configured of tangent sigmoid transfer function (tansig) at hidden layer with eight neurons for AC@Fe₃O₄-NH₂-COOH, and linear transfer function (purelin) at output layer. According to the calculated MSEs, Levenberg-Marquardt algorithm (LMA) was the best training algorithm among others. The linear regressions between the predicted and experimental outputs were proven to be a good agreement with a correlation coefficient of about 0.9984 for five model variables. Maximum adsorption capacity was achieved 80mg/g by Langmuir isotherm at pH of 7 and salinity of 25,000 ppm. Kinetic studies illustrated that mercury adsorption follows pseudo-second-order.     

Investigation of the conditions for synthesis of Ce<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>2</Subscript> dense coatings

The conditions for preparation of Ce_0.9Y_0.1O₂ (CYO) oxide coatings on La_0.8Sr_0.2MnO₃ (LSM) ceramic substrates by screen printing were investigated. The CYO compound was synthesized by the pyrolysis of polymer-salt composites with the aim of producing submicron powders with a uniform size distribution. Transmission electron microscopy of the microstructure of the CYO compound synthesized with ethylene glycol revealed that the synthesis product consists of ultrafine crystalline particles with an average size of 5–15 nm. The use of CYO nanopowders made it possible to prepare rather dense single-layer coatings on LSM substrates. It was demonstrated that annealing of the coatings at high temperatures leads to the recrystallization and coarsening of particles.     

Electrochemical characterization of La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript>-coated NiO as cathodes for molten carbonate fuel cells

La_0.8Sr_0.2MnO₃ was coated on porous NiO cathode using a simple combustion process. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed in the cathode characterizations. The electrochemical behavior of La_0.8Sr_0.2MnO₃-coated NiO cathodes (LSM–NiO) were also evaluated in a molten 62 mol%Li₂CO₃+38 mol%K₂CO₃ eutectic at 650 °C under the standard cathode gas condition by electrochemical impedance spectroscopy (EIS). The impedance response of the NiO and LSM–NiO cathode at different immersion times is characterized by the presence of depressed semicircles in the high frequency range and an extension at low frequencies. Impedance analysis showed that the behavior of the developed cathode was similar to that of the conventional nickel oxide cathode. The LSM–NiO showed a lower dissolution and a better catalytic efficiency superior to the state-of-the-art NiO value. Thus the cathode prepared with coating method to coat La_0.8Sr_0.2MnO₃ on the surface of NiO cathode is able to reduce the solubility of NiO to lengthen the lifetime of MCFC while maintaining the advantages of NiO cathode. The LSM–NiO shows promise as an alternate cathode in molten carbonate fuel cells (MCFCs).     

Zr K-edge XAS study on ZrO<Subscript>2</Subscript>-pillared aluminosilicate

The ZrO₂-pillared clay with high acidic property has been prepared by reacting 1 wt% colloidal suspension of Na⁺-montmorillonite with 1 N aqueous solution of ZrOCl₂·8H₂O and by subsequent heating. The evolution of local structure around zirconium of the intercalant stabilized in-between aluminosilicate layers upon intercalating, drying, and pillaring condition has been systematically studied by X-ray absorption spectroscopy, and compared to those of reference compounds such as ZrO₂, and ZrOCl₂ · 8H₂O and its 1 N aqueous solution. The intercalated zirconium species was identified as the Zr-tetramer, [Zr₄(OH)₁₄(H₂O)₁₀]²⁺, with an average molecular volume of 10 × 10 Å² and a thickness of 4.5 Å. Also it becomes more condensed upon drying and eventually transforms to a zirconium oxide pillar upon calcination.