Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation

Droplets containing ternary mixtures can spontaneously phase‐separate into high‐order structures upon a change in composition, which provides an alternative strategy to form multiphase droplets. However, existing strategies always involve nonaqueous solvents that limit the potential applications of the resulting multiple droplets, such as encapsulation of biomolecules. Here, a robust approach to achieve high‐order emulsion drops with an all‐aqueous nature from two aqueous phases by osmosis‐induced phase separation on a microfluidic platform is presented. This technique is enabled by the existence of an interface of the two aqueous phases and phase separation caused by an osmolality difference between the two phases. The complexity of emulsion drops induced by phase separation could be controlled by varying the initial concentration of solutes and is systematically illustrated in a state diagram. In particular, this technique is utilized to successfully achieve high‐order all‐aqueous droplets in a different aqueous two‐phase system. The proposed method is simple since it only requires two initial aqueous solutions for generating multilayered, organic‐solvent‐free all‐aqueous emulsion drops, and thus these multiphase emulsion drops can be further tailored to serve as highly biocompatible material templates.     

Freeform,Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures

Aqueous microstructures are challenging to create, handle, and preserve since their surfaces tend to shrink into spherical shapes with minimum surface areas. The creation of freeform aqueous architectures will significantly advance the bioprinting of complex tissue‐like constructs, such as arteries, urinary catheters, and tracheae. The generation of complex, freeform, three‐dimensional (3D) all‐liquid architectures using formulated aqueous two‐phase systems (ATPSs) is demonstrated. These all‐liquid microconstructs are formed by printing aqueous bioinks in an immiscible aqueous environment, which functions as a biocompatible support and pregel solution. By exploiting the hydrogen bonding interaction between polymers in ATPS, the printed aqueous‐in‐aqueous reconfigurable 3D architectures can be stabilized for weeks by the noncovalent membrane at the interface. Different cells can be separately combined with compartmentalized bioinks and matrices to obtain tailor‐designed microconstructs with perfusable vascular networks. The freeform, reconfigurable embedded printing of all‐liquid architectures by ATPSs offers unique opportunities and powerful tools since limitless formulations can be designed from among a breadth of natural and synthetic hydrophilic polymers to mimic tissues. This printing approach may be useful to engineer biomimetic, dynamic tissue‐like constructs for potential applications in drug screening, in vitro tissue models, and regenerative medicine.     

Programmable Hydrogel Ionic Circuits for Biologically Matched Electronic Interfaces

The increased need for wearable and implantable medical devices has driven the demand for electronics that interface with living systems. Current bioelectronic systems have not fully resolved mismatches between engineered circuits and biological systems, including the resulting pain and damage to biological tissues. Here, salt/poly(ethylene glycol) (PEG) aqueous two‐phase systems are utilized to generate programmable hydrogel ionic circuits. High‐conductivity salt‐solution patterns are stably encapsulated within PEG hydrogel matrices using salt/PEG phase separation, which route ionic current with high resolution and enable localized delivery of electrical stimulation. This strategy allows designer electronics that match biological systems, including transparency, stretchability, complete aqueous‐based connective interface, distribution of ionic electrical signals between engineered and biological systems, and avoidance of tissue damage from electrical stimulation. The potential of such systems is demonstrated by generating light‐emitting diode (LED)‐based displays, skin‐mounted electronics, and stimulators that deliver localized current to in vitro neuron cultures and muscles in vivo with reduced adverse effects. Such electronic platforms may form the basis of future biointegrated electronic systems.     

Photosensitive Nanoparticles Combining Vascular‐Independent Intratumor Distribution and On‐Demand Oxygen‐Depot Delivery for Enhanced Cancer Photodynamic Therapy

In drug delivery, the poor tumor perfusion results in disappointing therapeutic efficacy. Nanomedicines for photodynamic therapy (PDT) greatly need deep tumor penetration due to short lifespan and weak diffusion of the cytotoxic reactive oxygen species (ROS). The damage of only shallow cells can easily cause invasiveness and metastasis. Moreover, even if the nanomedicines enter into deeper lesion, the effectiveness of PDT is limited due to the hypoxic microenvironment. Here, a deep penetrating and oxygen self‐sufficient PDT nanoparticle is developed for balanced ROS distribution within tumor and efficient cancer therapy. The designed nanoparticles (CNPs/IP) are doubly emulsified (W/O/W) from poly(ethylene glycol)‐poly(ε‐caprolactone) copolymers doped with photosensitizer IR780 in the O layer and oxygen depot perfluorooctyl bromide (PFOB) inside the core, and functionalized with the tumor penetrating peptide Cys‐Arg‐Gly‐Asp‐Lys (CRGDK). The CRGDK modification significantly improves penetration depth of CNPs/IP and makes the CNPs/IP arrive at both the periphery and hypoxic interior of tumors where the PFOB releases oxygen, effectively alleviating hypoxia and guaranteeing efficient PDT performance. The improved intratumoral distribution of photosensitizer and adequate oxygen supply augment the sensitivity of tumor cells to PDT and significantly improve PDT efficiency. Such a nanosystem provides a potential platform for improved therapeutic index in anticancer therapy.     

以聚苯乙烯磺酸钠接枝聚乙二醇为模板的聚3,4-二氧乙烯噻吩水分散体的制备及性能

以苯乙烯磺酸钠(SSNa)和烯丙基聚乙二醇(APEG)为原料,制备了不同结构的聚苯乙烯磺酸钠接枝聚乙二醇(P(SS-APEG))共聚物,并以此为模板制备了聚3,4-二氧乙烯噻吩∶聚(苯乙烯磺酸钠-烯丙基聚乙二醇)(PEDOT∶P(SS-APEG))水分散体;研究了聚乙二醇(PEG)链段长度对PEDOT∶P(SS-APEG)结构与性能的影响。结果表明,通过自由基共聚,成功制备了聚苯乙烯磺酸钠接枝聚乙二醇(P(SS-APEG))共聚物。以P(SS-APEG)为模板时,EDOT的聚合速率加快,分散体粒径随APEG相对分子质量的增加而增大,水分散体表面张力减小。PEDOT薄膜的方块电阻明显降低,且APEG的相对分子质量越小,薄膜的方块电阻越低,导电性越好。当APEG的相对分子质量为700,n(SSNa)∶n(APEG)=32∶1,m(EDOT)∶m(P(SS-APEG))=1∶3时,PEDOT∶P(SS-APEG)薄膜的方块电阻较PEDOT∶PSS(m(EDOT)∶m(PSS)=1∶3)薄膜下降了3倍。     

Nanopore Sensing in Aqueous Two‐Phase System: Simultaneous Enhancement of Signal and Translocation Time via Conformal Coating

Nanofluidic resistive pulse sensing (RPS) has been extensively used to measure the size, concentration, and surface charge of nanoparticles in electrically conducting solutions. Although various methods have been explored for improving detection performances, intrinsic problems including the extremely low particle‐to‐pore volume ratio (<0.01%) and fast nanoparticle translocation (10–1000 µs) still induce difficulties in detection, such as low signal magnitudes and short translocation times. Herein, we present an aqueous two‐phase system (ATPS) in a nanofluidic RPS for amplifying translocation signals and decreasing translocation speeds simultaneously. Two immiscible aqueous liquids build a liquid‐liquid interface inside nanopores. As particles translocate from a high‐affinity liquid phase into a lower‐affinity one, the high‐affinity liquid forms a conformal coating on the particles, which increases the effective particle size and amplifies the current‐blockage signal. The translocation time is also increased, as the ATPS interface impedes the particle translocation. For 20 nm particles, 7.92‐fold and 5.82‐fold enhancements of signal magnitude and translocation time can be achieved. To our knowledge, this is the first attempt to improve nanofluidic RPS by treating an interface of solution reservoirs for manipulating target particles rather than nanopores. This direct particle manipulation allows us to solve the two intrinsic problems all at once.     

Electron Transfer Mediated by Surface‐Tethered Redox Groups in Nanofluidic Devices

Electrochemistry provides a powerful sensor transduction and amplification mechanism that is highly suited for use in integrated, massively parallelized assays. Here, the cyclic voltammetric detection of flexible, linear poly(ethylene glycol) polymers is demonstrated, which have been functionalized with redox‐active ferrocene (Fc) moieties and surface‐tethered inside a nanofluidic device consisting of two microscale electrodes separated by a gap of <100 nm. Diffusion of the surface‐bound polymer chains in the aqueous electrolyte allows the redox groups to repeatedly shuttle electrons from one electrode to the other, resulting in a greatly amplified steady‐state electrical current. Variation of the polymer length provides control over the current, as the activity per Fc moiety appears to depend on the extent to which the polymer layers of the opposing electrodes can interpenetrate each other and thus exchange electrons. These results outline the design rules for sensing devices that are based on changing the polymer length, flexibility, and/or diffusivity by binding an analyte to the polymer chain. Such a nanofluidic enabled configuration provides an amplified and highly sensitive alternative to other electrochemical detection mechanisms.     

An Investigation of PS‐b‐PEO Polymersomes for the Oral Treatment and Diagnosis of Hyperammonemia

Ammonia‐scavenging transmembrane pH‐gradient poly(styrene)‐b‐poly(ethylene oxide) polymersomes are investigated for the oral treatment and diagnosis of hyperammonemia, a condition associated with serious neurologic complications in patients with liver disease as well as in infants with urea cycle disorders. While these polymersomes are highly stable in simulated intestinal fluids at extreme bile salt and osmolality conditions, they unexpectedly do not reduce plasmatic ammonia levels in cirrhotic rats after oral dosing. Incubation in dietary fiber hydrogels mimicking the colonic environment suggests that the vesicles are probably destabilized during the dehydration of the intestinal chyme. The findings question the relevance of commonly used simulated intestinal fluids for studying vesicular stability. With the encapsulation of a pH‐sensitive dye in the polymersome core, the local pH increase upon ammonia influx could be exploited to assess the ammonia concentration in the plasma of healthy and cirrhotic rats as well as in other fluids. Due to its high sensitivity and selectivity, this polymersome‐based assay could prove useful in the monitoring of hyperammonemic patients and in other applications such as drug screening tests.     

Proteolytically Degradable Photo‐Polymerized Hydrogels Made From PEG–Fibrinogen Adducts

We develop a biomaterial based on protein–polymer conjugates where poly(ethylene glycol) (PEG) polymer chains are covalently linked to multiple thiols on denatured fibrinogen. We hypothesize that conjugation of large diacrylate‐functionalized linear PEG chains to fibrinogen could govern the molecular architecture of the polymer network via a unique protein–polymer interaction. The hypothesis is explored using carefully designed shear rheometry and swelling experiments of the hydrogels and their precursor PEG/fibrinogen conjugate solutions. The physical properties of non‐cross‐linked and UV cross‐linked PEGylated fibrinogen having PEG molecular weights ranging from 10 to 20 kDa are specifically investigated. Attaching multiple hydrophilic, functionalized PEG chains to the denatured fibrinogen solubilizes the denatured protein and enables a rapid free‐radical polymerization cross‐linking reaction in the hydrogel precursor solution. As expected, the conjugated protein‐polymer macromolecular complexes act to mediate the interactions between radicals and unsaturated bonds during the free‐radical polymerization reaction, when compared to control PEG hydrogels. Accordingly, the cross‐linking kinetics and stiffness of the cross‐linked hydrogel are highly influenced by the protein–polymer conjugate architecture and molecular entanglements arising from hydrophobic/hydrophilic interactions and steric hindrances. The proteolytic degradation products of the protein–polymer conjugates proves to be were different from those of the non‐conjugated denatured protein degradation products, indicating that steric hindrances may alter the proteolytic susceptibility of the PEG–protein adduct. A more complete understanding of the molecular complexities associated with this type of protein‐polymer conjugation can help to identify the full potential of a biomaterial that combines the advantages of synthetic polymers and bioactive proteins.     

Molecular transport characteristics of poly (ethylene‐co‐vinyl acetate) membranes in the presence of normal alkanes

Solvent transport into poly (ethylene‐co‐vinyl acetate) membranes exposed to n‐alkanes has been studied in the temperature interval of 30–60°C. Pure and cross‐linked membranes were prepared. Membranes with different loading of cross‐linking agent were also prepared. It was found that for all liquids, the equilibrium penetrant uptake was influenced by the introduction of cross links. The mechanism of transport has been found to deviate from the regular Fickian behaviour. Transport parameters such as diffusion coefficient, sorption constant and permeability coefficient have been calculated. The influence of temperature on transport was analysed. Transport parameters and activation parameters for the process of diffusion have been calculated. The transport coefficients and the activation parameters showed a dependence on cross‐link density. The Van't Hoff's relationship was used to compute the entropy change. The values of polymer–solvent interaction parameters have been used to calculate the molar mass between cross links of the network polymer. The phantom and affine models were used to analyse the deformation of the networks during swelling. A correlation between theoretical and experimental results was also done. Copyright © 2007 John Wiley & Sons, Ltd.     

PLA-PEG-PLA嵌段共聚物的合成及研究

本研究将可生物降解高分子聚乳酸与具有亲水性链段的聚乙二醇共聚制得嵌段共聚物,用以改善疏水性材料聚乳酸的亲水性.研究发现通过共聚,显著改善了聚乳酸材料的亲水性,在一定反应条件下,使得材料的接触角由46°降为10～23°.同时还对共聚物的结构性能进行了表征和探讨.     

赖氨酸改性聚乳酸/聚乙二醇共聚物的制备及表征

在丙交酯与聚乙二醇开环共聚的基础上进行了二次聚合,利用具有生物相容性的赖氨酸对聚乳酸/聚乙二醇低聚物进行改性,制备出了赖氨酸改性聚乳酸/聚乙二醇共聚物。通过红外光谱、核磁共振谱、X射线衍射分析仪、差示扫描量热仪、凝胶渗透色谱和接触角测量仪分析比较了聚乳酸、聚乳酸/聚乙二醇和赖氨酸改性聚乳酸/聚乙二醇3种聚合物之间存在的差异。结果表明,实验成功合成了赖氨酸改性聚乳酸/聚乙二醇共聚物;赖氨酸(L-lys)的引入使得共聚物的热焓(ΔH)和熔点(T_m)分别由纯PLLA的81.57 J/g和177.34℃降到46.02 J/g和151.34℃,有效地改善了分子链的柔性和结晶度;聚合物的数均相对分子质量(M_n)也由纯PLLA的7.7×10~4降到了3.2×10~4,且相对分子质量分布变宽,但亲水性却得到大幅提高,有望适用于组织工程领域。