A Highly Emissive Surface Layer in Mixed‐Halide Multication Perovskites

Mixed‐halide lead perovskites have attracted significant attention in the field of photovoltaics and other optoelectronic applications due to their promising bandgap tunability and device performance. Here, the changes in photoluminescence and photoconductance of solution‐processed triple‐cation mixed‐halide (Cs_0.06MA_0.15FA_0.79)Pb(Br_0.4I_0.6)₃ perovskite films (MA: methylammonium, FA: formamidinium) are studied under solar‐equivalent illumination. It is found that the illumination leads to localized surface sites of iodide‐rich perovskite intermixed with passivating PbI₂ material. Time‐ and spectrally resolved photoluminescence measurements reveal that photoexcited charges efficiently transfer to the passivated iodide‐rich perovskite surface layer, leading to high local carrier densities on these sites. The carriers on this surface layer therefore recombine with a high radiative efficiency, with the photoluminescence quantum efficiency of the film under solar excitation densities increasing from 3% to over 45%. At higher excitation densities, nonradiative Auger recombination starts to dominate due to the extremely high concentration of charges on the surface layer. This work reveals new insight into phase segregation of mixed‐halide mixed‐cation perovskites, as well as routes to highly luminescent films by controlling charge density and transfer in novel device structures.     

Suppressing Defects-Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

Organic–inorganic hybrid perovskites have attracted considerable attention due to their superior optoelectronic properties. Traditional one-step solution-processed perovskites often suffer from defects-induced nonradiative recombination, which significantly hinders the improvement of device performance. Herein, treatment with green antisolvents for achieving high-quality perovskite films is reported. Compared to defects-filled ones, perovskite films by antisolvent treatment using methylamine bromide (MABr) in ethanol (MABr-Eth) not only enhances the resultant perovskite crystallinity with large grain size, but also passivates the surface defects. In this case, the engineering of MABr-Eth-treated perovskites suppressing defects-induced nonradiative recombination in perovskite solar cells (PSCs) is demonstrated. As a result, the fabricated inverted planar heterojunction device of ITO/PTAA/Cs_0.15FA_0.85PbI₃/PC₆₁BM/Phen-NADPO/Ag exhibits the best power conversion efficiency of 21.53%. Furthermore, the corresponding PSCs possess a better storage and light-soaking stability.     

Long Electron–Hole Diffusion Length in High‐Quality Lead‐Free Double Perovskite Films

Developing environmentally friendly perovskites has become important in solving the toxicity issue of lead‐based perovskite solar cells. Here, the first double perovskite (Cs₂AgBiBr₆) solar cells using the planar structure are demonstrated. The prepared Cs₂AgBiBr₆ films are composed of high‐crystal‐quality grains with diameters equal to the film thickness, thus minimizing the grain boundary length and the carrier recombination. These high‐quality double perovskite films show long electron–hole diffusion lengths greater than 100 nm, enabling the fabrication of planar structure double perovskite solar cells. The resulting solar cells based on planar TiO₂ exhibit an average power conversion efficiency over 1%. This work represents an important step forward toward the realization of environmentally friendly solar cells and also has important implications for the applications of double perovskites in other optoelectronic devices.     

Ultrathin Ruddlesden–Popper Perovskite Heterojunction for Sensitive Photodetection

Thanks to their unique optical and electric properties, 2D materials have attracted a lot of interest for optoelectronic applications. Here, the emerging 2D materials, organic–inorganic hybrid perovskites with van der Waals interlayer interaction (Ruddlesden–Popper perovskites), are synthesized and characterized. Photodetectors based on the few‐layer Ruddlesden–Popper perovskite show good photoresponsivity as well as good detectivity. In order to further improve the photoresponse performance, 2D MoS₂ is chosen to construct the perovskite–MoS₂ heterojunction. The performance of the hybrid photodetector is largely improved with 6 and 2 orders of magnitude enhancement for photoresponsivity (10⁴ A W^?1) and detectivity (4 × 10¹⁰ Jones), respectively, which demonstrates the facile charge separation at the interface between perovskite and MoS₂. Furthermore, the contribution of back gate tuning is proved with a greatly reduced dark current. The results demonstrated here will open up a new field for the investigation of 2D perovskites for optoelectronic applications.     

Slow‐Photon‐Effect‐Induced Photoelectrical‐Conversion Efficiency Enhancement for Carbon‐Quantum‐Dot‐Sensitized Inorganic CsPbBr3 Inverse Opal Perovskite Solar Cells

All‐inorganic cesium lead halide perovskite is suggested as a promising candidate for perovskite solar cells due to its prominent thermal stability and comparable light absorption ability. Designing textured perovskite films rather than using planar‐architectural perovskites can indeed optimize the optical and photoelectrical conversion performance of perovskite photovoltaics. Herein, for the first time, this study demonstrates a rational strategy for fabricating carbon quantum dot (CQD‐) sensitized all‐inorganic CsPbBr₃ perovskite inverse opal (IO) films via a template‐assisted, spin‐coating method. CsPbBr₃ IO introduces slow‐photon effect from tunable photonic band gaps, displaying novel optical response property visible to naked eyes, while CQD inlaid among the IO frameworks not only broadens the light absorption range but also improves the charge transfer process. Applied in the perovskite solar cells, compared with planar CsPbBr₃, slow‐photon effect of CsPbBr₃ IO greatly enhances the light utilization, while CQD effectively facilitates the electron–hole extraction and injection process, prolongs the carrier lifetime, jointly contributing to a double‐boosted power conversion efficiency (PCE) of 8.29% and an increased incident photon‐to‐electron conversion efficiency of up to 76.9%. The present strategy on CsPbBr₃ IO to enhance perovskite PCE can be extended to rationally design other novel optoelectronic devices.     

Structural and Functional Diversity in Lead‐Free Halide Perovskite Materials

Lead halide perovskites have emerged as promising semiconducting materials for different applications owing to their superior optoelectronic properties. Although the community holds different views toward the toxic lead in these high‐performance perovskites, it is certainly preferred to replace lead with nontoxic, or at least less‐toxic, elements while maintaining the superior properties. Here, the design rules for lead‐free perovskite materials with structural dimensions from 3D to 0D are presented. Recent progress in lead‐free halide perovskites is reviewed, and the relationships between the structures and fundamental properties are summarized, including optical, electric, and magnetic‐related properties. 3D perovskites, especially A₂B⁺B³⁺X₆‐type double perovskites, demonstrate very promising optoelectronic prospects, while low‐dimensional perovskites show rich structural diversity, resulting in abundant properties for optical, electric, magnetic, and multifunctional applications. Furthermore, based on these structure–property relationships, strategies for multifunctional perovskite design are proposed. The challenges and future directions of lead‐free perovskite applications are also highlighted, with emphasis on materials development and device fabrication. The research on lead‐free halide perovskites at Linköping University has benefited from inspirational discussions with Prof. Olle Inganäs.     

Low‐Dimensional Perovskites with Diammonium and Monoammonium Alternant Cations for High‐Performance Photovoltaics

Low‐dimensional Ruddlesden–Popper (LDRP) perovskites are a current theme in solar energy research as researchers attempt to fabricate stable photovoltaic devices from them. However, poor exciton dissociation and insufficiently fast charge transfer slows the charge extraction in these devices, resulting in inferior performance. 1,4‐Butanediamine (BEA)‐based low‐dimensional perovskites are designed to improve the carrier extraction efficiency in such devices. Structural characterization using single‐crystal X‐ray diffraction reveals that these layered perovskites are formed by the alternating ordering of diammonium (BEA²⁺) and monoammonium (MA⁺) cations in the interlayer space (B‐ACI) with the formula (BEA)_0.5MA_n PbnI_3n+1. Compared to the typical LDRP counterparts, these B‐ACI perovskites deliver a wider light absorption window and lower exciton binding energies with a more stable layered perovskite structure. Additionally, ultrafast transient absorption indicates that B‐ACI perovskites exhibit a narrow distribution of quantum well widths, leading to a barrier‐free and balanced carrier transport pathway with enhanced carrier diffusion (electron and hole) length over 350 nm. A perovskite solar cell incorporating BEA ligands achieves record efficiencies of 14.86% for (BEA)_0.5MA₃Pb₃I₁₀ and 17.39% for (BEA)_0.5Cs_0.15(FA_0.83MA_0.17)_2.85Pb₃(I_0.83Br_0.17)₁₀ without hysteresis. Furthermore, the triple cations B‐ACI devices can retain over 90% of their initial power conversion efficiency when stored under ambient atmospheric conditions for 2400 h and show no significant degradation under constant illumination for over 500 h.     

Real‐Time Observation of Order‐Disorder Transformation of Organic Cations Induced Phase Transition and Anomalous Photoluminescence in Hybrid Perovskites

A fundamental understanding of the interplay between the microscopic structure and macroscopic optoelectronic properties of organic‐inorganic hybrid perovskite materials is essential to design new materials and improve device performance. However, how exactly the organic cations affect the structural phase transition and optoelectronic properties of the materials is not well understood. Here, real‐time, in situ temperature‐dependent neutron/X‐ray diffraction and photoluminescence (PL) measurements reveal a transformation of the organic cation CH₃NH₃ ⁺ from order to disorder with increasing temperature in CH₃NH₃PbBr₃ perovskites. The molecular‐level order‐to‐disorder transformation of CH₃NH₃ ⁺ not only leads to an anomalous increase in PL intensity, but also results in a multidomain to single‐domain structural transition. This discovery establishes the important role that organic cation ordering has in dictating structural order and anomalous optoelectronic phenomenon in hybrid perovskites.     

Crystallization Kinetics and Morphology Control of Formamidinium–Cesium Mixed‐Cation Lead Mixed‐Halide Perovskite via Tunability of the Colloidal Precursor Solution

The meteoric rise of the field of perovskite solar cells has been fueled by the ease with which a wide range of high‐quality materials can be fabricated via simple solution processing methods. However, to date, little effort has been devoted to understanding the precursor solutions, and the role of additives such as hydrohalic acids upon film crystallization and final optoelectronic quality. Here, a direct link between the colloids concentration present in the [HC(NH₂)₂]_0.83Cs_0.17Pb(Br_0.2I_0.8)₃ precursor solution and the nucleation and growth stages of the thin film formation is established. Using dynamic light scattering analysis, the dissolution of colloids over a time span triggered by the addition of hydrohalic acids is monitored. These colloids appear to provide nucleation sites for the perovskite crystallization, which critically impacts morphology, crystal quality, and optoelectronic properties. Via 2D X‐ray diffraction, highly ordered and textured crystals for films prepared from solutions with lower colloidal concentrations are observed. This increase in material quality allows for a reduction in microstrain along with a twofold increase in charge‐carrier mobilities leading to values exceeding 20 cm² V^?1 s^?1. Using a solution with an optimized colloidal concentration, devices that reach current–voltage measured power conversion efficiency of 18.8% and stabilized efficiency of 17.9% are fabricated.     

Dual‐Phase CsPbBr3–CsPb2Br5 Perovskite Thin Films via Vapor Deposition for High‐Performance Rigid and Flexible Photodetectors

Inorganic perovskites with special semiconducting properties and structures have attracted great attention and are regarded as next generation candidates for optoelectronic devices. Herein, using a physical vapor deposition process with a controlled excess of PbBr₂, dual‐phase all‐inorganic perovskite composite CsPbBr₃–CsPb₂Br₅ thin films are prepared as light‐harvesting layers and incorporated in a photodetector (PD). The PD has a high responsivity and detectivity of 0.375 A W^?1 and 10¹¹ Jones, respectively, and a fast response time (from 10% to 90% of the maximum photocurrent) of ≈280 µs/640 µs. The device also shows an excellent stability in air for more than 65 d without encapsulation. Tetragonal CsPb₂Br₅ provides satisfactory passivation to reduce the recombination of the charge carriers, and with its lower free energy, it enhances the stability of the inorganic perovskite devices. Remarkably, the same inorganic perovskite photodetector is also highly flexible and exhibits an exceptional bending performance (>1000 cycles). These results highlight the great potential of dual‐phase inorganic perovskite films in the development of optoelectronic devices, especially for flexible device applications.     

Fluorinated 2D Lead Iodide Perovskite Ferroelectrics

Hybrid perovskite materials are famous for their great application potential in photovoltaics and optoelectronics. Among them, lead‐iodide‐based perovskites receive great attention because of their good optical absorption ability and excellent electrical transport properties. Although many believe the ferroelectric photovoltaic effect (FEPV) plays a crucial role for the high conversion efficiency, the ferroelectricity in CH₃NH₃PbI₃ is still under debate, and obtaining ferroelectric lead iodide perovskites is still challenging. In order to avoid the randomness and blindness in the conventional method of searching for perovskite ferroelectrics, a design strategy of fluorine modification is developed. As a demonstration, a nonpolar lead iodide perovskite is modified and a new 2D fluorinated layered hybrid perovskite material of (4,4‐difluorocyclohexylammonium)₂PbI₄, 1 , is obtained, which possesses clear ferroelectricity with controllable spontaneous polarization. The direct bandgap of 2.38 eV with strong photoluminescence also guarantees the direct observation of polarization‐induced FEPV. More importantly, the 2D structure and fluorination are also expected to achieve both good stability and charge transport properties. 1 is not only a 2D fluorinated lead iodide perovskite with confirmed ferroelectricity, but also a great platform for studying the effect of ferroelectricity and FEPV in the context of lead halide perovskite solar cells and other optoelectronic applications.     

Lead-Free Cesium Thulium Halide Perovskite Microcrystals for Near Ultraviolet Luminescence

Lead halide perovskites attract tremendous research attention due to excellent optoelectronic properties. However, realizing efficient near ultraviolet (NUV) luminescence with these materials is still a big challenge. Herein, a novel rare-earth perovskite cesium thulium chloride (CsTmCl₃) with high crystallinity has been synthesized via a simple hot-injection method. The obtained CsTmCl₃ microcrystals have a size distribution of around 1–5 µm, and demonstrate a highly efficient NUV emission at 337 nm with a full width at half maximum (FWHM) of 68 nm. The determined band gap of CsTmCl₃ microcrystals is ≈3.92 eV, which is supported by theoretical calculations. Moreover, a high photoluminescence quantum yield (PLQY) of up to 12% in NUV region has been achieved in such a lead-free perovskite. The findings suggest that CsTmCl₃ perovskite microcrystal is a promising low-toxic material for applications in NUV optoelectronic devices.     

Conjugated Polyelectrolytes as Multifunctional Passivating and Hole‐Transporting Layers for Efficient Perovskite Light‐Emitting Diodes

Metal halide perovskites (MHPs) have attracted significant attention as light‐emitting materials owing to their high color purities and tunabilities. A key issue in perovskite light‐emitting diodes (PeLEDs) is the fabrication of an optimal charge transport layer (CTL), which has desirable energy levels for efficient charge injection while blocking opposite charges and enabling perovskite layer growth with reduced interfacial defects. Herein, two poly(fluorene‐phenylene)‐based anionic conjugated polyelectrolytes (CPEs) with different counterions (K⁺ and tetramethylammonium (TMA⁺)) are presented as multifunctional passivating and hole‐transporting layers (HTLs). The crystal growth of MHPs grown on different HTLs is investigated through X‐ray photoelectron spectroscopy, X‐ray diffraction, and density functional theory calculation. The CPE bearing the TMA⁺ counterions remarkably improves the growth of perovskites with suppressed interfacial defects, leading to significantly enhanced emission properties and device performance. The luminescent properties are further enhanced via aging and electrical stress application with effective rearrangement of the counterions on the interfacial defects in the perovskites. Finally, efficient formamidinium lead tribromide‐based quasi‐2D PeLEDs with an external quantum efficiency of 10.2% are fabricated. Using CPEs with varying counterions as a CTL can serve as an effective method for controlling the interfacial defects and improving perovskite‐based optoelectronic device properties.     

Lead‐Free Organic–Inorganic Hybrid Perovskites for Photovoltaic Applications: Recent Advances and Perspectives

Organic–inorganic hybrid halide perovskites (e.g., MAPbI₃) have recently emerged as novel active materials for photovoltaic applications with power conversion efficiency over 22%. Conventional perovskite solar cells (PSCs); however, suffer the issue that lead is toxic to the environment and organisms for a long time and is hard to excrete from the body. Therefore, it is imperative to find environmentally‐friendly metal ions to replace lead for the further development of PSCs. Previous work has demonstrated that Sn, Ge, Cu, Bi, and Sb ions could be used as alternative ions in perovskite configurations to form a new environmentally‐friendly lead‐free perovskite structure. Here, we review recent progress on lead‐free PSCs in terms of the theoretical insight and experimental explorations of the crystal structure of lead‐free perovskite, thin film deposition, and device performance. We also discuss the importance of obtaining further understanding of the fundamental properties of lead‐free hybrid perovskites, especially those related to photophysics.     

Two‐Dimensional Materials for Halide Perovskite‐Based Optoelectronic Devices

Halide perovskites have high light absorption coefficients, long charge carrier diffusion lengths, intense photoluminescence, and slow rates of non‐radiative charge recombination. Thus, they are attractive photoactive materials for developing high‐performance optoelectronic devices. These devices are also cheap and easy to be fabricated. To realize the optimal performances of halide perovskite‐based optoelectronic devices (HPODs), perovskite photoactive layers should work effectively with other functional materials such as electrodes, interfacial layers and encapsulating films. Conventional two‐dimensional (2D) materials are promising candidates for this purpose because of their unique structures and/or interesting optoelectronic properties. Here, we comprehensively summarize the recent advancements in the applications of conventional 2D materials for halide perovskite‐based photodetectors, solar cells and light‐emitting diodes. The examples of these 2D materials are graphene and its derivatives, mono‐ and few‐layer transition metal dichalcogenides (TMDs), graphdiyne and metal nanosheets, etc. The research related to 2D nanostructured perovskites and 2D Ruddlesden–Popper perovskites as efficient and stable photoactive layers is also outlined. The syntheses, functions and working mechanisms of relevant 2D materials are introduced, and the challenges to achieving practical applications of HPODs using 2D materials are also discussed.     

Highly Oriented Thin Films of 2D Ruddlesden‐Popper Hybrid Perovskite toward Superfast Response Photodetectors

2D hybrid perovskites have shown great promise in the photodetection field, due to their intriguing attributes stemming from unique structural architectures. However, the great majority of detectors based on this 2D system possess a relatively low response speed (≈ms), making it extremely urgent to develop new candidates for superfast photodetection. Here, a new organic–inorganic hybrid perovskite, (PA)₂(FA)Pb₂I₇ (EFA, where PA is n‐pentylaminium and FA is formamidine), which features the 2D Ruddlesden–Popper type perovskite framework that is composed of the corner‐sharing PbI₆ octahedra is reported. Significantly, photodetectors fabricated on highly oriented thin films, which exhibit a perfect orientation parallel to 2D inorganic perovskite layers, exhibit a superfast response time up to ≈2.54 ns. To the best of the knowledge, this figure‐of‐merit catches up with that of the top‐ranking commercial materials, and sets a new record for 2D hybrid perovskite photodetectors. Moreover, extremely high photodetectivity (≈1.73 × 10¹⁴ Jones, under an incident power intensity of ≈46 µW cm^?2), considerable switching ratios (>10³), and low dark current (≈10 pA) are also achieved in the detector, indicating its great potential for high‐efficiency photodetection. These results shed light on the possibilities to explore new 2D candidates for assembling future high‐performance optoelectronic devices.     

Nanocube Superlattices of Cesium Lead Bromide Perovskites and Pressure‐Induced Phase Transformations at Atomic and Mesoscale Levels

Lead halide perovskites are promising materials for a range of applications owing to their unique crystal structure and optoelectronic properties. Understanding the relationship between the atomic/mesostructures and the associated properties of perovskite materials is crucial to their application performances. Herein, the detailed pressure processing of CsPbBr₃ perovskite nanocube superlattices (NC‐SLs) is reported for the first time. By using in situ synchrotron‐based small/wide angle X‐ray scattering and photoluminescence (PL) probes, the NC‐SL structural transformations are correlated at both atomic and mesoscale levels with the band‐gap evolution through a pressure cycle of 0 ? 17.5 GPa. After the pressurization, the individual CsPbBr₃ NCs fuse into 2D nanoplatelets (NPLs) with a uniform thickness. The pressure‐synthesized perovskite NPLs exhibit a single cubic crystal structure, a 1.6‐fold enhanced photoluminescence quantum yield, and a longer emission lifetime than the starting NCs. This study demonstrates that pressure processing can serve as a novel approach for the rapid conversion of lead halide perovskites into structures with enhanced properties.     

A Highly Sensitive Single Crystal Perovskite–Graphene Hybrid Vertical Photodetector

Organolead trihalide perovskites have attracted significant attention for optoelectronic applications due to their excellent physical properties in the past decade. Generally, both grain boundaries in perovskite films and the device structure play key roles in determining the device performance, especially for horizontal‐structured device. Here, the first optimized vertical‐structured photodetector with the perovskite single crystal MAPbBr₃ as the light absorber and graphene as the transport layer is shown. The hybrid device combines strong photoabsorption characteristics of perovskite and high carrier mobility of flexible graphene, exhibits excellent photoresponse performance with high photoresponsivity (≈1017.1 A W^?1) and high photodetectivity (≈2.02 × 10¹³ Jones) in a low light intensity (0.66 mW cm^?2) under the actuations of 3 V bias and laser irradiation at 532 nm. In particular, an ultrahigh photoconductive gain of ≈2.37 × 10³ is attained because of fast charge transfer in the graphene and large recombination lifetime in the perovskite single crystal. The vertical architecture combining perovskite crystal with highly conductive graphene offers opportunities to fulfill the synergistic effect of perovskite and 2D materials, is thus promising for developing high‐performance electronic and optoelectronic devices.     

Flexible,Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots

Metal halide perovskites represent a family of the most promising materials for fascinating photovoltaic and photodetector applications due to their unique optoelectronic properties and much needed simple and low‐cost fabrication process. The high atomic number (Z) of their constituents and significantly higher carrier mobility also make perovskite semiconductors suitable for the detection of ionizing radiation. By taking advantage of that, the direct detection of soft‐X‐ray‐induced photocurrent is demonstrated in both rigid and flexible detectors based on all‐inorganic halide perovskite quantum dots (QDs) synthesized via a solution process. Utilizing a synchrotron soft‐X‐ray beamline, high sensitivities of up to 1450 µC Gy_air^?1 cm^?2 are achieved under an X‐ray dose rate of 0.0172 mGy_air s^?1 with only 0.1 V bias voltage, which is about 70‐fold more sensitive than conventional α‐Se devices. Furthermore, the perovskite film is printed homogeneously on various substrates by the inexpensive inkjet printing method to demonstrate large‐scale fabrication of arrays of multichannel detectors. These results suggest that the perovskite QDs are ideal candidates for the detection of soft X‐rays and for large‐area flat or flexible panels with tremendous application potential in multidimensional and different architectures imaging technologies.     

Reversible,Fast, and Wide‐Range Oxygen Sensor Based on Nanostructured Organometal Halide Perovskite

Nanostructured materials characterized by high surface–volume ratio hold the promise to constitute the active materials for next‐generation sensors. Solution‐processed hybrid organohalide perovskites, which have been extensively used in the last few years for optoelectronic applications, are characterized by a self‐assembled nanostructured morphology, which makes them an ideal candidate for gas sensing. Hitherto, detailed studies of the dependence of their electrical characteristics on the environmental atmosphere have not been performed, and even the effect of a ubiquitous gas such as O₂ has been widely overlooked. Here, the electrical response of organohalide perovskites to oxygen is studied. Surprisingly, a colossal increase (3000‐fold) in the resistance of perovskite‐based lateral devices is found when measured in a full oxygen atmosphere, which is ascribed to a trap healing mechanism originating from an O₂‐mediated iodine vacancies filling. A variation as small as 70 ppm in the oxygen concentration can be detected. The effect is fast (<400 ms) and fully reversible, making organohalide perovskites ideal active materials for oxygen sensing. The effect of oxygen on the electrical characteristics of organohalide perovskites must be taken into deep consideration for the design and optimization of any other perovskite‐based (opto‐) electronic device working in ambient conditions.