Passive vibration control of an offshore floating hydrostatic wind turbine model

We propose to make use of the hydraulic reservoir of a floating barge hydrostatic wind turbine (HWT) to suppress the pitch and roll motions of the barge by making the reservoir into a shape of an annular rectangular to serve as a bidirectional tuned liquid column damper (BTLCD). This means that we have made a barge‐motion damper with negligible extra costs as an HWT needs a reservoir for fluid storage anyway. The barge HWT simulation model is transformed from the NREL (National Renewable Energy Laboratory) 5‐MW geared equipped ITI Energy barge wind turbine model within the FAST (fatigue, aerodynamics, structures, and turbulence) code by replacing its drivetrain with a hydrostatic transmission drivetrain and incorporating the coupled dynamics of the barge‐reservoir system. We use 2 simplified turbine‐reservoir models to optimize the parameters of the BTLCD reservoir, which describe the pitch and roll motions of the turbine‐reservoir system, respectively. Simulation results based on the transformed NREL 5‐MW barge HWT model show that the optimal BTLCD reservoir is very effective in mitigating pitch and roll motions of the barge under realistic wind and wave excitations, which reduces the tower load and improves the power quality.     

Active tuned mass damper for damping of offshore wind turbine vibrations

An active tuned mass damper (ATMD) is employed for damping of tower vibrations of fixed offshore wind turbines, where the additional actuator force is controlled using feedback from the tower displacement and the relative velocity of the damper mass. An optimum tuning procedure equivalent to the tuning procedure of the passive tuned mass damper combined with a simple procedure for minimizing the control force is employed for determination of optimum damper parameters and feedback gain values. By time domain simulations conducted in an aeroelastic code, it is demonstrated that the ATMD can be used to further reduce the structural response of the wind turbine compared with the passive tuned mass damper and this without an increase in damper mass. A limiting factor of the design of the ATMD is the displacement of the damper mass, which for the ATMD, increases to compensate for the reduction in mass. Copyright © 2016 John Wiley & Sons, Ltd.     

An investigation on the impacts of passive and semiactive structural control on a fixed bottom and a floating offshore wind turbine

The application of structural control to offshore wind turbines (OWTs) using tuned mass dampers (TMDs) has shown to be effective in reducing the system loads. The parameters of a magnetorheological (MR) damper modeled by the Bouc‐Wen model are modified to utilize it as a damping device of the TMD. Rather than showcasing the intricate design policy, this research focuses on the availability of the MR damper model on TMDs and its significance on structural control. The impact of passive and semiactive (S‐A) TMDs applied to both fixed bottom and floating OWTs is evaluated under the fatigue limit state (FLS) and the ultimate limit state (ULS). Different S‐A control logics based on the ground hook (GH) control policy are implemented, and the frequency response of each algorithm is investigated. It is shown that the performance of each algorithm varies according to the load conditions such as a normal operation and an extreme case. Fully coupled time domain simulations are conducted through a newly developed simulation tool, integrated into FASTv8. Compared with the passive TMD, it is shown that the S‐A TMD results in higher load reductions with smaller strokes under both the FLS and the ULS conditions. The S‐A TMD using displacement‐based GH control is capable of reducing the fore‐aft and side‐to‐side damage equivalent loads for the monopile by approximately 12% and 64%, respectively. The ultimate loadings at the tower base for the floating substructure are reduced by 9% with the S‐A TMD followed by inverse velocity‐based GH control (IVB‐GH).     

两种常用漂浮式风力机平台动态特性分析

分别针对MIT/NREL TLP和Umaine-Hywind Spar两种海上风力机浮式平台主体的水动力特性进行研究,旨在分析两者的系泊稳定性.基于海洋水动力学和结构动力学理论,建立了平台/缆索系统耦合模型,在水深和外界载荷激励相同的情况下,利用有限元分析ANSYS软件中的水动力学计算模块进行时域、频域响应分析,研究了两种平台在海风、海流和随机波联合作用下的动态响应,并分析了两种平台随波浪频率的响应变化.结果表明:MIT/NREL TLP平台的动态响应较大,而Umaine-Hywind Spar平台动态响应较小;两平台均在低频波浪作用下产生响应峰值.     

Investigating the aerodynamic performance of a model offshore floating wind turbine

Understanding the impact of wave-induced dynamic effects on the aerodynamic performance of Offshore Floating Wind Turbines (OFWTs) is crucial towards developing cost-effective floating wind turbines to harness wind energy in deep water sites. The complexity of the wake of an OFWT has not yet been fully understood. Measurements and numerical simulations are essential. An experiment to investigate the aerodynamics of a model OFWT was undertaken at the University of Malta. Established experimental techniques used to analyse fixed HAWTs were applied and modified for the floating turbine condition. The effects of wave induced motions on the rotor aerodynamic variables were analysed in detail. An open source free-wake vortex code was also used to examine whether certain phenomena observed in the experiments could be reproduced numerically by the lifting line method. Results from hot wire measurements and free-wake vortex simulations have shown that for OFWTs surge-induced torque fluctuations are evident. At high λ a discrepancy in the mean C_P between the fixed and floating conditions was found from measurements and numerical simulations.     

An analytical frequency-domain model of aerodynamic mass and damping of floating wind turbines

The fore-aft motion of the rotor-nacelle assembly (RNA) of a rotating floating wind turbine (FWT) can cause an oscillation in aerodynamic thrust, which may be equivalently treated as frequency-dependent aerodynamic mass and damping effects. In this study, an explicit frequency-domain analytical model is proposed to calculate the equivalent aerodynamic mass and damping of FWTs, with proper linearization of control system. Assuming that an FWT operates under steady wind conditions and a forced oscillation is exerted at the RNA along the wind direction, the thrust fluctuations are equivalently represented by the force and moment acting on the nacelle instead of pure aerodynamic loads. Based on the thrust oscillation expression, equivalent aerodynamic mass and damping are derived analytically. After verifying the model by numerical comparison, it is used to demonstrate equivalent aerodynamic mass and damping of three wind turbines (5–15 MW). Effects of wind turbine up-scaling and controller dynamics are addressed. Results show that equivalent aerodynamic mass and damping present a nonlinear characteristic with oscillation frequency in the below-rated region, while the relationship is close to linear for higher wind speeds. The effect of wind turbine up-scaling has a visible impact on equivalent aerodynamic mass and damping, especially at near-rated wind speed. Controller gains affect equivalent aerodynamic mass and damping and should be tuned reasonably in the controller design for FWTs. Outcomes of our study can be used to establish a frequency-domain coupled model of FWTs and are beneficial for conceptual design and parameter optimization of the platform of FWTs.     

Platform stabilization and load reduction of floating offshore wind turbines with tension‐leg platform using dynamic vibration absorbers

Floating offshore wind turbines (FOWT) are subject to significant increases in structural loads due to the platform motion under turbulent wind and wave. The under‐actuation challenge in FOWT control demands for development of extra actuators for platform stabilization. For FOWT with tension‐leg platform (TLP), this paper presents a comprehensive study on design and control simulation for realizing active mooring line control via the deployment of vertically operated dynamic vibration absorbers (DVAs) at the spokes of TLP structure. The DVA is designed based on the suppression of the primary modes of platform pitch and roll motion. In addition to the enhancement of FAST‐based simulation module, an 11 degrees‐of‐freedom (DOFs) control‐oriented model is derived for the TLP‐FOWT‐DVA system. Based on the control‐oriented model, a linear quadratic regulator (LQR) controller is designed. Simulations are performed for 9 m/s and 18 m/s turbulent winds with different wind and wave directions. The wind turbine performance, platform motions, and structural fatigue loads are evaluated. The results show that the platform motion and tower loads in the lateral direction are significantly reduced, while the tower load in the fore‐aft direction can be moderately reduced. Also, significant reduction in the mooring line tension loads is observed. For achieving the performance in platform motion stabilization and load reduction, the average power consumption of the DVA actuators is less than 0.27% of the wind turbine power generated during the simulated periods. The figures of merits promise significant potential for the feasibility of DVA based control for TLP‐FOWT.     

Load response of a two-rotor floating wind turbine undergoing blade-pitch system faults

Multi-rotor floating wind turbines are among the innovative technologies proposed in the last decade in the effort to reduce the cost of wind energy. These systems are able to offer advantages in terms of smaller blades deployed offshore, cheaper operations, fewer installations, and sharing of the floating platform. As the blade-pitch actuation system is prone to failures, the assessment of the associated load scenarios is commonly required. Load assessment of blade-pitch fault scenarios has only been performed for single-rotor solutions. In this work, we address the effect of blade-pitch system faults and emergency shutdown on the dynamics and loads of a two-rotor floating wind turbine. The concept considered employs two NREL 5-MW baseline wind turbines and the OO-Star semi-submersible platform. The blade-pitch faults investigated are blade blockage and runaway, that is, the seizure at a given pitch angle and the uncontrolled actuation of one of the blades, respectively. Blade-pitch faults lead to a significant increase in the structural loads of the system, especially for runaway fault conditions. Emergency shutdown significantly excites the platform pitch motion, the tower-bottom bending moment, and tower torsional loads, while suppressing the faulty blade flapwise bending moment after a short peak. Shutdown delay between rotors increases significantly the maxima of the torsional loads acting on the tower. Comparison of blade loads with data from single-rotor spar-type study show great similarity, highlighting that the faulty blade loads are not affected by (1) the type of platform used and (2) the multi-rotor deployment.     

Aerodynamic simulations of offshore floating wind turbine in platform‐induced pitching motion

Forfloating offshore wind turbines, rotors are under coupled motions of rotating and platform‐induced motions because of hydrodynamics impacts. Notably, the coupled motion of platform pitching and rotor rotating induces unsteadiness and nonlinear aerodynamics in turbine operations; thus having a strong effect on the rotor performances including thrust and power generation. The present work aims at developing a computational fluid dynamics model for simulations of rotor under floating platform induced motions. The rotor motion is realized using arbitrary mesh interface, and wind flows are modelled by incompressible Navier‐Stokes flow solver appended by the k  ? ω shear stress transport turbulence model to resolve turbulence quantities. In order to investigate the fully coupled motion of floating wind turbine, the six degree of freedom solid body motion solver is extended to couple with multiple motions, especially for the motion of rotor coupled with the prescribed surge‐heave‐pitch motion of floating platform. The detailed methodology of multiple motion coupling is also described and discussed in this work. Both steady and unsteady simulations of offshore floating wind turbine are considered in the present work. The steady aerodynamic simulation of offshore floating wind turbine is implemented by the multiple reference frames approach and for the transient simulation, the rotor motion is realized using arbitrary mesh interface. A rigorous benchmark of the present numerical model is performed by comparing to the reported literatures. The detailed elemental thrust and power comparisons of wind turbine are carried out by comparing with the results from FAST developed by National Renewable Energy Laboratory and various existing numerical data with good agreement. The proposed approach is then applied for simulations of National Renewable Energy Laboratory 5MW turbine in coupled platform motion at various wind speeds under a typical load case scenario. Transient effect of flows over turbines rotor is captured with good prediction of turbine performance as compared with existing data from FAST. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluating the importance of mooring line model fidelity in floating offshore wind turbine simulations

Accurate computer modelling is critical in achieving cost‐effective floating offshore wind turbine designs. Although a range of modelling fidelities are available for all parts of the simulation, a lower‐fidelity quasi‐static approach that neglects inertia and hydrodynamics is often used for the mooring line model. The loss of accuracy from using this approach has not been thoroughly studied across different support structure designs. To test the adequacy of this widely used simplified mooring line modelling approach, the floating wind turbine simulator FAST (National Renewable Energy Laboratory, Golden, Colorado) was modified to allow the use of a high‐fidelity dynamic mooring line model, ProteusDS (Dynamic Systems Analysis Inc. of Victoria, BC, Canada). Three standard floating wind turbine designs were implemented in this new simulator arrangement and tested using a set of steady and stochastic wind and wave conditions. The static equivalence between the built‐in quasi‐static mooring model and the dynamic mooring model is within 0.6% in terms of fairlead tension. Tests of the systems’ responses in still water indicate that the hydrodynamic damping of the mooring lines can constitute anywhere from 1% to 35% of the overall system damping in pitch, depending on the design. Tests in steady and stochastic operating conditions show that for very stable designs with slack moorings, or designs with taut moorings, a quasi‐static mooring model can in many conditions predict the platform motions and turbine loads with reasonable accuracy. For slack‐moored designs with larger platform motions, however, a quasi‐static model can lead to inaccuracies of as much as 30% in the damage‐equivalent and extreme loads on the turbine. An important observation is that even in situations where the platform response is predicted reasonably well by a quasi‐static model, larger inaccuracies can arise in the response of the rotor blades. These inaccuracies are more severe in the time series (with instantaneous discrepancies as high as 50% of the mean load) than in the corresponding damage‐equivalent and extreme loads calculated over multiple stochastic simulations. Consequently, differences in damage‐equivalent and extreme load metrics should be considered a floor to the measure of inaccuracy caused by a quasi‐static mooring model. Copyright © 2013 John Wiley & Sons, Ltd.     

Aeroelastic analysis of a floating offshore wind turbine in platform‐induced surge motion using a fully coupled CFD‐MBD method

Modern offshore wind turbines are susceptible to blade deformation because of their increased size and the recent trend of installing these turbines on floating platforms in deep sea. In this paper, an aeroelastic analysis tool for floating offshore wind turbines is presented by coupling a high‐fidelity computational fluid dynamics (CFD) solver with a general purpose multibody dynamics code, which is capable of modelling flexible bodies based on the nonlinear beam theory. With the tool developed, we demonstrated its applications to the NREL 5 MW offshore wind turbine with aeroelastic blades. The impacts of blade flexibility and platform‐induced surge motion on wind turbine aerodynamics and structural responses are studied and illustrated by the CFD results of the flow field, force, and wake structure. Results are compared with data obtained from the engineering tool FAST v8.     

基于TMD的海上漂浮式风力机稳定性研究

海上漂浮式风力机的稳定性研究已逐渐成为风电研究的重点与热点。以NREL(国家可再生能源实验室)5 MW风力机及ITI Barge平台为研究对象,建立海上漂浮式风力机整机模型,通过配置TMD(调谐质量阻尼器),研究其对环境载荷作用下的海上漂浮式风力机稳定性的控制效果。结果表明:TMD对漂浮式风力机塔架和平台的运动响应有明显的抑制效果,在TMD控制下,漂浮式风力机塔顶左右位移最大值降低近50%,稳定性提高38%;对漂浮式风力机平台的横摇及横荡运动控制效果较明显,平台横荡稳定性提高18%,横摇稳定性提高41%。     

基于有限元法的漂浮式风力机Spar平台动态响应分析

以美国可再生能源实验室(NREL)的5 MW漂浮式风力机和Spar平台为参考模型,采用有限元分析法分析了Spar平台的波浪载荷频域特性,包括对振幅响应算子、绕射力和F-K力频域动态响应分析,并对比了三种波浪谱(P-M谱、JONSWAP谱和Wen’s谱)海况下的时域响应.结果表明:Spar平台载荷峰值出现在低频波浪作用下,且响应明显,而随着频率的增大,其值逐渐减小;在P-M谱和Wen’s谱作用下的平台动态响应无明显差异,且两者的振幅和周期大致相同,而在JONSWAP谱作用下的平台动态响应最小,但其往复周期小,频率大,使得系泊系统承受较大的周期性张力.     

CFD simulation of a floating offshore wind turbine system using a variable-speed generator-torque controller

Prediction and control of rotor rotational velocity is critical for accurate aerodynamic loading and generator power predictions. A variable-speed generator-torque controller is combined with the two-phase CFD solver CFDShip-Iowa V4.5. The developed code is utilized in simulations of the 5 MW floating offshore wind turbine (FOWT) conceptualized by the National Renewable Energy Laboratory (NREL) for the Offshore Code Comparison Collaboration (OC3). Fixed platform simulations are first performed to determine baseline rotor velocity and developed torque. A prescribed platform motion simulation is completed to identify effects of platform motion on rotor torque. The OC3’s load case 5.1, with regular wave and steady wind excitation, is performed and results are compared to NREL’s OC3 results. The developed code is shown to functionally control generator speed and torque but requires controller calibration for maximum power extraction. Generator speed variance is observed to be a function of unsteady stream-wise platform motions. The increased mooring forces of the present model are shown to keep the turbine in a more favorable variable-speed control region. Lower overall platform velocity magnitudes and less rotor torque are predicted corresponding to lower rotor rotational velocities and a reduction in generated power. Potential improvements and modifications to the present method are considered.     

Individual blade pitch control of floating offshore wind turbines

Floating wind turbines offer a feasible solution for going further offshore into deeper waters. However, using a floating platform introduces additional motions that must be taken into account in the design stage. Therefore, the control system becomes an important component in controlling these motions. Several controllers have been developed specifically for floating wind turbines. Some controllers were designed to avoid structural resonance, while others were used to regulate rotor speed and platform pitching. The development of a periodic state space controller that utilizes individual blade pitching to improve power output and reduce platform motions in above rated wind speed region is presented. Individual blade pitching creates asymmetric aerodynamic loads in addition to the symmetric loads created by collective blade pitching to increase the platform restoring moments. Simulation results using a high‐fidelity non‐linear turbine model show that the individual blade pitch controller reduces power fluctuations, platform rolling rate and platform pitching rate by 44%, 39% and 43%, respectively, relative to a baseline controller (gain scheduled proportional–integral blade pitch controller) developed specifically for floating wind turbine systems. Turbine fatigue loads were also reduced; tower side–side fatigue loads were reduced by 39%. Copyright © 2009 John Wiley & Sons, Ltd.     

柱状漂浮式风力机结构振动控制

针对柱状漂浮式风力机的结构振动控制展开研究.首先为进行调谐质量阻尼器(TMD)参数的优化,对风力机模型进行简化,并对简化模型中的未知参数进行估计;随后,基于简化模型分别使用公式法和遗传算法对TMD参数进行优化,并通过比较塔顶前后位移的标准偏差确定最终的优化方法;最后,为评估TMD对风力机振动控制的影响,构建风力机的联合...     

Effect of platform disturbance on the performance of offshore wind turbine under pitch control

The aerodynamic performance of offshore floating wind turbines (OFWTs) is more complicated than onshore wind turbines due to 6‐degree of freedom (DOF) motion of the floating platform. In the current study, the aerodynamic analysis of a horizontal‐axis floating offshore wind turbine is performed with the aim of studying the effects of floating platform movement on the aerodynamic characteristics of the turbine in the presence of a pitch angle control system. The National Renewable Energy Laboratory (NREL) 5‐MW offshore wind turbine is selected as the baseline wind turbine. For this sake, the unsteady blade element momentum method with dynamic stall and dynamic inflow models have been employed to obtain the unsteady aerodynamic loads. The baseline pitch angle control system is assumed to be coupled with the aerodynamic model to maintain the rated condition of the wind turbine and also to approach a closer model of wind turbine. In case of pitching motion input, the reduction of mean power coefficient for tip speed ratios (TSRs) less that 7 is expected by an amount of 16% to 20% at pitch amplitude of 2° and frequency of 0.1 Hz. For high TSRs, the trend is reverse with respect to fixed‐platform case. The mean thrust coefficient is reduced for almost all range of TSRs with maximum loss of 37%. Moreover, the mean control pitch angle that is an index of control system effort is increased. The results also represent the importance of considering the pitch control system for aerodynamic analysis of disturbed OFWT.     

Condition monitoring of spar‐type floating wind turbine drivetrain using statistical fault diagnosis

Operation and maintenance costs are significant for large‐scale wind turbines and particularly so for offshore. A well‐organized operation and maintenance strategy is vital to ensure the reliability, availability, and cost‐effectiveness of a system. The ability to detect, isolate, estimate, and perform prognoses on component degradation could become essential to reduce unplanned maintenance and downtime. Failures in gearbox components are in focus since they account for a large share of wind turbine downtime. This study considers detection and estimation of wear in the downwind main‐shaft bearing of a 5‐MW spar‐type floating turbine. Using a high‐fidelity gearbox model, we show how the downwind main bearing and nacelle axial accelerations can be used to evaluate the condition of the bearing. The paper shows how relative acceleration can be evaluated using statistical change‐detection methods to perform a reliable estimation of wear of the bearing. It is shown in the paper that the amplitude distribution of the residual accelerations follows a t‐distribution and a change‐detection test is designed for the specific changes we observe when the main bearing becomes worn. The generalized likelihood ratio test is extended to fit the particular distribution encountered in this problem, and closed‐form expressions are derived for shape and scale parameter estimation, which are indicators for wear and extent of wear in the bearing. The results in this paper show how the proposed approach can detect and estimate wear in the bearing according to desired probabilities of detection and false alarm.     

Mitigation of transient torque reversals in indirect drive wind turbine drivetrains

Bearing failure in wind turbine gearboxes is one of the significant sources of downtime. While it is well-known that bearing failures cause the largest downtime, the failure cause(s) is often elusive. The bearings are designed to satisfy their rolling contact fatigue (RCF) life. However, they often undergo sudden and rapid failure within a few years of operation. It is well-known that these premature failures are attributed to surface damages such as white surface flaking (WSF), white etching cracks (WECs) and axial cracks. In that regard, transient torque reversals (TTRs) in the drivetrain have emerged as one of the primary triggers of surface damage, as explained in this paper. The risk associated with TTRs motivates the need to mitigate TTRs arising in the drivetrain due to various transient events. This paper investigates three TTR mitigation methods. First, two existing devices, namely, the torsional tuned mass damper and the asymmetric torque limiter, are studied to demonstrate their TTR mitigation capabilities. Then, a novel idea of open-loop high-speed shaft mechanical brake control is proposed. The results presented here show that while the torsional tuned mass damper and the asymmetric torque limiter can improve the torsional vibration characteristics of the drivetrain, they cannot mitigate TTRs in terms of eliminating the bearing slip risk associated with TTRs. However, the novel approach proposed here can mitigate TTRs both in terms of improving the torque characteristic in the high-speed shaft and reducing the risk of bearing slip by actuating the high-speed shaft brake at the onset of the transient event. Furthermore, the control method is capable of mitigating TTRs with the mechanical limitations of a pneumatic actuator in terms of bandwidth and initial dead time applied to it. This novel approach allows the wind turbines to protect the gearbox bearings from TTRs using the existing hardware on the turbine.     

Power generation control of a hydrostatic wind turbine implemented by model‐free adaptive control scheme

The hydrostatic wind turbine (HWT) is a type of wind turbine that uses hydrostatic transmission (HST) drivetrain to replace the traditional gearbox drivetrain. Without the fragile and expensive gearbox and power converters, HWT can potentially reduce the maintenance costs owing to the gearbox and power converter failures in wind power system, especially in offshore cases. We design an MFAC torque controller to regulate the pump torque of the HWT and compared with an torque controller. Then we design an MFAC pitch controller to stabilise the rotor speed of HWT and compared with a gain‐scheduling proportional‐integral (PI) controller and a gain‐scheduling PI controller with antiwindup (PIAW). The results indicate that MFAC torque controller provides more effective tracking performance than the controller and that MFAC pitch controller shows better rotor speed stabilisation performance in comparison with the gain‐scheduling PI controller and PIAW.