Zirconium‐Regulation‐Induced Bifunctionality in 3D Cobalt–Iron Oxide Nanosheets for Overall Water Splitting

The design of high‐efficiency non‐noble bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting technologies and associated renewable energy systems. Spinel‐structured oxides with rich redox properties can serve as alternative low‐cost OER electrocatalysts but with poor HER performance. Here, zirconium regulation in 3D CoFe₂O₄ (CoFeZr oxides) nanosheets on nickel foam, as a novel strategy inducing bifunctionality toward OER and HER for overall water splitting, is reported. It is found that the incorporation of Zr into CoFe₂O₄ can tune the nanosheet morphology and electronic structure around the Co and Fe sites for optimizing adsorption energies, thus effectively enhancing the intrinsic activity of active sites. The as‐synthesized 3D CoFeZr oxide nanosheet exhibits high OER activity with small overpotential, low Tafel slope, and good stability. Moreover, it shows unprecedented HER activity with a small overpotential of 104 mV at 10 mA cm^?2 in alkaline media, which is better than ever reported counterparts. When employing the CoFeZr oxides nanosheets as both anode and cathode catalysts for overall water splitting, a current density of 10 mA cm^?2 is achieved at the cell voltage of 1.63 V in 1.0 m KOH.     

Exceptional Performance of Hierarchical Ni–Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In this work, using earth‐abundant transition metals (i.e., nickel, iron, and copper), 3D hierarchical nanoarchitectures, consisting of ultrathin Ni–Fe layered‐double‐hydroxide (Ni–Fe LDH) nanosheets or porous Ni–Fe oxides (NiFeO_x) assembled to a metallic NiCu alloy, are delicately constructed. In alkaline solution, the as‐prepared Ni–Fe LDH@NiCu possesses outstanding OER activity, achieving a current density of 10 mA cm^?2 at an overpotential of 218 mV, which is smaller than that of RuO₂ catalyst (249 mV). In contrast, the resulting NiFeO_x@NiCu exhibits better HER activity, yielding a current density of 10 mA cm^?2 at an overpotential of 66 mV, which is slightly higher than that of Pt catalyst (53 mV) but superior to all other transition metal (hydr)oxide‐based electrocatalysts. The remarkable activity of the Ni–Fe LDH@NiCu and NiFeO_x@NiCu is further demonstrated by a 1.5 V solar‐panel‐powered electrolyzer, resulting in current densities of 10 and 50 mA cm^?2 at overpotentials of 293 and 506 mV, respectively. Such performance renders the as‐prepared materials as the best bifunctional electrocatalysts so far.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

A Heterostructure Coupling of Exfoliated Ni–Fe Hydroxide Nanosheet and Defective Graphene as a Bifunctional Electrocatalyst for Overall Water Splitting

Herein, the authors demonstrate a heterostructured NiFe LDH‐NS@DG10 hybrid catalyst by coupling of exfoliated Ni–Fe layered double hydroxide (LDH) nanosheet (NS) and defective graphene (DG). The catalyst has exhibited extremely high electrocatalytic activity for oxygen evolution reaction (OER) in an alkaline solution with an overpotential of 0.21 V at a current density of 10 mA cm^?2, which is comparable to the current record (≈0.20 V in Fe–Co–Ni metal‐oxide‐film system) and superior to all other non‐noble metal catalysts. Also, it possesses outstanding kinetics (Tafel slope of 52 mV dec^?1) for the reaction. Interestingly, the NiFe LDH‐NS@DG10 hybrid has also exhibited the high hydrogen evolution reaction (HER) performance in an alkaline solution (with an overpotential of 115 mV by 2 mg cm^?2 loading at a current density of 20 mA cm^?2) in contrast to barely HER activity for NiFe LDH‐NS itself. As a result, the bifunctional catalyst the authors developed can achieve a current density of 20 mA cm^?2 by a voltage of only 1.5 V, which is also a record for the overall water splitting. Density functional theory calculation reveals that the synergetic effects of highly exposed 3d transition metal atoms and carbon defects are essential for the bifunctional activity for OER and HER.     

Cation‐Modulated HER and OER Activities of Hierarchical VOOH Hollow Architectures for High‐Efficiency and Stable Overall Water Splitting

Atom‐scale modulation of electronic regulation in nonprecious‐based electrocatalysts is promising for efficient catalytic activities. Here, hierarchically hollow VOOH nanostructures are rationally constructed by partial iron substitution and systematically investigated for electrocatalytic water splitting. Benefiting from the hierarchically stable scaffold configuration, highly electrochemically active surface area, the synergistic effect of the active metal atoms, and optimal adsorption energies, the 3% Fe (mole ratio) substituted electrocatalyst (VOOH‐3Fe) exhibits a low overpotential of 90 and 195 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, respectively, superior than the other samples with a different substituted ratio. To the best of current knowledge, 195 mV overpotential at 10 mA cm^?2 is the best value reported for V or Fe (oxy)hydroxide‐based OER catalysts. Moreover, the electrolytic cell employing the VOOH‐3Fe electrode as both the cathode and anode exhibits a cell voltage of 0.30 V at 10 mA cm^?2 with a remarkable stability over 60 h. This work heralds a new pathway to design efficient bifunctional catalysts toward overall water splitting.     

Fe2+‐Doped Layered Double (Ni,Fe) Hydroxides as Efficient Electrocatalysts for Water Splitting and Self‐Powered Electrochemical Systems

Developing nonprecious electrocatalysts with superior activity and durability for electrochemical water splitting is of great interest but challenging due to the large overpotential required above the thermodynamic standard potential of water splitting (1.23 V). Here, in situ growth of Fe²⁺‐doped layered double (Ni, Fe) hydroxide (NiFe(II,III)‐LDH) on nickel foam with well‐defined hexagonal morphology and high crystallinity by a redox reaction between Fe³⁺ and nickel foam under hydrothermal conditions is reported. Benefiting from tuning the local atomic structure by self‐doping Fe²⁺, the NiFe(II,III)‐LDH catalyst with higher amounts of Fe²⁺ exhibits high activity toward oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER) activity. Moreover, the optimized NiFe(II,III)‐LDH catalyst for OER (O‐NiFe(II,III)‐LDH) and catalyst for HER (H‐NiFe(II,III)‐LDH) show overpotentials of 140 and 113 mV, respectively, at a current density of 10 mA cm^?2 in 1 m KOH aqueous electrolyte. Using the catalysts for overall water splitting in two‐electrode configuration, a low overpotential of just 1.54 V is required at a benchmark current density of 10 mA cm^?2. Furthermore, it is demonstrated that electrolysis of the water device can be drived by a self‐powered system through integrating a triboelectric nanogenerator and battery, showing a promising way to realize self‐powered electrochemical systems.     

Graphene Composites with Cobalt Sulfide: Efficient Trifunctional Electrocatalysts for Oxygen Reversible Catalysis and Hydrogen Production in the Same Electrolyte

Nitrogen and sulfur‐codoped graphene composites with Co₉S₈ (NS/rGO‐Co) are synthesized by facile thermal annealing of graphene oxides with cobalt nitrate and thiourea in an ammonium atmosphere. Significantly, in 0.1 m KOH aqueous solution the best sample exhibits an oxygen evolution reaction (OER) activity that is superior to that of benchmark RuO₂ catalysts, an oxygen reduction reaction (ORR) activity that is comparable to that of commercial Pt/C, and an overpotential of only ?0.193 V to reach 10 mA cm^?2 for hydrogen evolution reaction (HER). With this single catalyst for oxygen reversible electrocatalysis, a potential difference of only 0.700 V is observed in 0.1 m KOH solution between the half‐wave potential in ORR and the potential to reach 10 mA cm^?2 in OER; in addition, an overpotential of only 450 mV is needed to reach 10 mA cm^?2 for full water splitting in the same electrolyte. The present trifunctional catalytic activities are markedly better than leading results reported in recent literature, where the remarkable trifunctional activity is attributed to the synergetic effects between N,S‐codoped rGO, and Co₉S₈ nanoparticles. These results highlight the significance of deliberate structural engineering in the preparation of multifunctional electrocatalysts for versatile electrochemical reactions.     

Self‐Supportive Mesoporous Ni/Co/Fe Phosphosulfide Nanorods Derived from Novel Hydrothermal Electrodeposition as a Highly Efficient Electrocatalyst for Overall Water Splitting

Low cost and highly efficient bifuctional catalysts for overall water electrolysis have drawn considerable interests over the past several decades. Here, rationally synthesized mesoporous nanorods of nickel–cobalt–iron–sulfur–phosphorus composites are tightly self‐supported on Ni foam as a high‐performance, low cost, and stable bifunctional electrocatalyst for water electrolysis. The targeted designing and rational fabrication give rise to the nanorod‐like morphology with large surface area and excellent conductivity. The NiCoFe‐PS nanorod/NF can reach 10 mA cm^?2 at a small overpotential of 195 mV with a Tafel slope of 40.3 mV dec^?1 for the oxygen evolution reaction and 97.8 mV with 51.8 mV dec^?1 for the hydrogen evolution reaction. Thus, this bifunctional catalyst shows low potentials of 1.52 and 1.76 V at 10 and 50 mA cm^?2 toward overall water splitting with excellent stability for over 200 h, which are superior to most non‐noble metal‐based bifunctional electrocatalysts recently. This work provides a new strategy to fabricate multiple metal‐P/S composites with the mesoporous nanorod‐like structure as bifunctional catalysts for overall water splitting.     

Nitrogen Engineering on 3D Dandelion‐Flower‐Like CoS2 for High‐Performance Overall Water Splitting

Searching for highly efficient and stable bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is highly desirable for the practical application of water electrolysis under alkaline electrolyte. Although electrocatalysts based on transition metal sulfides (TMSs) are widely studied as efficient (pre)catalysts toward OER under alkaline media, their HER performances are far less than the state‐of‐the‐art Pt catalyst. Herein, the synthesis of nitrogen doped 3D dandelion‐flower‐like CoS₂ architecture directly grown on Ni foam (N‐CoS₂/NF) is reported that possesses outstanding HER activity and durability, with an overpotential of 28 mV to obtain the current density of 10 mA cm^?2, exceeding almost all the documented TMS‐based electrocatalysts. Density functional theory calculations and experimental results reveal that the d‐band center of CoS₂ could be efficiently tailored by N doping, resulting in optimized adsorption free energies of hydrogen (ΔG_*H) and water , which can accelerate the HER process in alkaline electrolyte. Besides, the resulting N‐CoS₂/NF also displays excellent performance for OER, making it a high‐performance bifunctional electrocatalyst toward overall water splitting, with a cell voltage of 1.50 V to achieve 10 mA cm^?2.     

A Robust Nonprecious CuFe Composite as a Highly Efficient Bifunctional Catalyst for Overall Electrochemical Water Splitting

To generate hydrogen, which is a clean energy carrier, a combination of electrolysis and renewable energy sources is desirable. In particular, for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in electrolysis, it is necessary to develop nonprecious, efficient, and durable catalysts. A robust nonprecious copper–iron (CuFe) bimetallic composite is reported that can be used as a highly efficient bifunctional catalyst for overall water splitting in an alkaline medium. The catalyst exhibits outstanding OER and HER activity, and very low OER and HER overpotentials (218 and 158 mV, respectively) are necessary to attain a current density of 10 mA cm^?2. When used in a two‐electrode water electrolyzer system for overall water splitting, it not only achieves high durability (even at a very high current density of 100 mA cm^?2) but also reduces the potential required to split water into oxygen and hydrogen at 10 mA cm^?2 to 1.64 V for 100 h of continuous operation.     

3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.     

Scalable Fabrication of Highly Active and Durable Membrane Electrodes toward Water Oxidation

The electrocatalytic oxygen evolution reaction (OER) is a highly important reaction that requires a relatively high overpotential and determines the rate of water splitting—a process for producing hydrogen. The overall OER performance is often largely limited by uncontrollable interface when active catalysts are loaded on conductive supports, for which polymer binders are widely used, but inevitably block species transportation channels. Here, a scalable fabrication approach to freestanding graphitized carbon nanofiber networks is reported, which provides abundant sites for in situ growing Fe/Ni catalysts with the improved interface. The fabricated hybrid membrane exhibits high activity and durability toward OER, with an overpotential of 280 mV at a geometrical current density of 10 mA cm^?2 and a Tafel slope of 30 mV dec^?1 in alkaline medium. As implemented as a freestanding electrode, the 3D hybrid structure achieves further enhanced OER performance with an overpotential down to 215 mV at 10 mA cm^?2. This work provides fresh insights into rationally fabricating OER electrocatalysts from the angle of electrode design.     

In Situ Derived CoB Nanoarray: A High‐Efficiency and Durable 3D Bifunctional Electrocatalyst for Overall Alkaline Water Splitting

The development of efficient bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of extreme importance for future renewable energy systems. This Communication reports the recent finding that room‐temperature treatment of CoO nanowire array on Ti mesh by NaBH₄ in alkaline media leads to in situ development of Co?B nanoparticles on nanowire surface. The resulting self‐supported Co?B@CoO nanoarray behaves as a 3D bifunctional electrocatalyst with high activity and durability for both HER (<17% current density degradation after 20 h electrolysis) and OER (<14% current density degradation after 20 h electrolysis) with the need of the overpotentials of 102 and 290 mV to drive 50 mA cm^?2 in 1.0 m KOH, respectively. Moreover, its two‐electrode alkaline water electrolyzer also shows remarkably high durability and only demands a cell voltage of 1.67 V to deliver 50 mA cm^?2 water‐splitting current with a current density retention of 81% after 20 h electrolysis. This work provides a promising methodology for the designing and fabricating of metal‐boride based nanoarray as a high‐active water‐splitting catalyst electrode for applications.     

Trifunctional Single‐Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost‐effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single‐atomic Ru sites anchored onto Ti₃C₂T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half‐wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^?2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂–O₂ fuel cell using the as‐prepared catalyst can reach as high as 941 mW cm^?2. Theoretical calculations reveal that isolated Ru–O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential‐determining steps, thereby accelerating the HER, ORR, and OER kinetics.     

Highly Efficient and Stable Water‐Oxidation Electrocatalysis with a Very Low Overpotential using FeNiP Substitutional‐Solid‐Solution Nanoplate Arrays

The development of efficient water‐oxidation electrocatalysts based on inexpensive and earth‐abundant materials is significant to enable water splitting as a future renewable energy source. Herein, the synthesis of novel FeNiP solid‐solution nanoplate (FeNiP‐NP) arrays and their use as an active catalyst for high‐performance water‐oxidation catalysis are reported. The as‐prepared FeNiP‐NP catalyst on a 3D nickel foam substrate exhibits excellent electrochemical performance with a very low overpotential of only 180 mV to reach a current density of 10 mA cm^?2 and an onset overpotential of 120 mV in 1.0 m KOH for the oxygen evolution reaction (OER). The slope of the Tafel plot is as low as 76.0 mV dec^?1. Furthermore, the long‐term electrochemical stability of the FeNiP‐NP electrode is investigated by cyclic voltammetry (CV) at 1.10–1.55 V versus reversible hydrogen electrode (RHE), demonstrating very stable performance with negligible loss in activity after 1000 CV cycles. This present FeNiP‐NP solid solution is thought to represent the best OER catalytic activity among the non‐noble metal catalysts reported so far.     

A Cost‐Efficient Bifunctional Ultrathin Nanosheets Array for Electrochemical Overall Water Splitting

The design of cost‐efficient earth‐abundant catalysts with superior performance for the electrochemical water splitting is highly desirable. Herein, a general strategy for fabricating superior bifunctional water splitting electrodes is reported, where cost‐efficient earth‐abundant ultrathin Ni‐based nanosheets arrays are directly grown on nickel foam (NF). The newly created Ni‐based nanosheets@NF exhibit unique features of ultrathin building block, 3D hierarchical structure, and alloy effect with the optimized Ni₅Fe layered double hydroxide@NF (Ni₅Fe LDH@NF) exhibiting low overpotentials of 210 and 133 mV toward both oxygen evolution reaction and hydrogen evolution reaction at 10 mA cm^?2 in alkaline condition, respectively. More significantly, when applying as the bifunctional overall water splitting electrocatalyst, the Ni₅Fe LDH@NF shows an appealing potential of 1.59 V at 10 mA cm^?2 and also superior durability at the very high current density of 50 mA cm^?2.     

Anion‐Modulated HER and OER Activities of 3D Ni–V‐Based Interstitial Compound Heterojunctions for High‐Efficiency and Stable Overall Water Splitting

Overall water splitting driven by a low voltage is crucial for practical H₂ evolution, but it is challenging. Herein, anion‐modulation of 3D Ni–V‐based transition metal interstitial compound (TMIC) heterojunctions supported on nickel foam (Ni₃N‐VN/NF and Ni₂P‐VP₂/NF) as coupled hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalysts for efficient overall water splitting is demonstrated. The heterointerface in Ni₃N‐VN has a suitable H* absorption energy, being favorable for enhancing HER activity with onset overpotential (η_onset) of zero and Tafel slope of 37 mV dec^?1 in 1 m KOH (close to that of Pt/C/NF). For the OER, the synergy of Ni₂P‐VP₂ with oxide species can give enhanced activity with η_onset of 220 mV and Tafel slope of 49 mV dec^?1. The good activity is ascribed to heterointerface for activating the intermediates, good conductivity of TMICs for electron‐transfer, and porous structure facilitation of mass‐transport. Additionally, the minimal mutual influence of Ni₃N‐VN/NF and Ni₂P‐VP₂/NF allows easy coupling for efficient overall water splitting with a low driving voltage (≥1.43 V), a voltage of 1.51 V at 10 mA cm^?2, and remarkable durability for 100 h. It can be driven by a solar cell (1.5 V), indicating its potential to store intermittent energy.     

Active Sites Intercalated Ultrathin Carbon Sheath on Nanowire Arrays as Integrated Core–Shell Architecture: Highly Efficient and Durable Electrocatalysts for Overall Water Splitting

The development of active bifunctional electrocatalysts with low cost and earth‐abundance toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a great challenge for overall water splitting. Herein, metallic Ni₄Mo nanoalloys are firstly implanted on the surface of NiMoO_x nanowires array (NiMo/NiMoO_x ) as metal/metal oxides hybrid. Inspired by the superiority of carbon conductivity, an ultrathin nitrogen‐doped carbon sheath intercalated NiMo/NiMoO_x (NC/NiMo/NiMoO_x ) nanowires as integrated core–shell architecture are constructed. The integrated NC/NiMo/NiMoO_x array exhibits an overpotential of 29 mV at 10 mA cm^?2 and a low Tafel slope of 46 mV dec^?1 for HER due to the abundant active sites, fast electron transport, low charge‐transfer resistance, unique architectural structure and synergistic effect of carbon sheath, nanoalloys, and oxides. Moreover, as OER catalysts, the NC/NiMo/NiMoO_x hybrids require an overpotential of 284 mV at 10 mA cm^?2. More importantly, the NC/NiMo/NiMoO_x array as a highly active and stable electrocatalyst approaches ≈10 mA cm^?2 at a voltage of 1.57 V, opening an avenue to the rational design and fabrication of the promising electrode materials with architecture structures toward the electrochemical energy storage and conversion.     

Synergistic Coupling of Ni Nanoparticles with Ni3C Nanosheets for Highly Efficient Overall Water Splitting

Exploring earth‐abundant bifunctional electrocatalysts with high efficiency for water electrolysis is extremely demanding and challenging. Herein, density functional theory (DFT) predictions reveal that coupling Ni with Ni₃C can not only facilitate the oxygen evolution reaction (OER) kinetics, but also optimize the hydrogen adsorption and water adsorption energies. Experimentally, a facile strategy is designed to in situ fabricate Ni₃C nanosheets on carbon cloth (CC), and simultaneously couple with Ni nanoparticles, resulting in the formation of an integrated heterostructure catalyst (Ni–Ni₃C/CC). Benefiting from the superior intrinsic activity as well as the abundant active sites, the Ni–Ni₃C/CC electrode demonstrates excellent bifunctional electrocatalytic activities toward the OER and hydrogen evolution reaction (HER), which are superior to all the documented Ni₃C‐based electrocatalysts in alkaline electrolytes. Specifically, the Ni–Ni₃C/CC catalyst exhibits the low overpotentials of only 299 mV at the current density of 20 mA cm^?2 for the OER and 98 mV at 10 mA cm^?2 for the HER in 1 m KOH. Furthermore, the bifunctional Ni–Ni₃C/CC catalyst can propel water electrolysis with excellent activity and nearly 100% faradic efficiency. This work highlights an easy approach for designing and constructing advanced nickel carbide‐based catalysts with high activity based on the theoretical predictions.     

NiMoFe and NiMoFeP as Complementary Electrocatalysts for Efficient Overall Water Splitting and Their Application in PV‐Electrolysis with STH 12.3%

Complementary water splitting electrocatalysts used simultaneously in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can simplify water splitting systems. Herein, earth‐abundant NiMoFe (NMF) and phosphorized NiMoFeP (NMFP) are synthesized as complementary overall water splitting (OWS) catalysts. First, NMF is tested as both the HER and OER promoter, which exhibits low overpotentials of 68 (HER) and 337 mV (OER). A quaternary NMFP is then prepared by simple phosphorization of NMF, which shows a much lower OER overpotential of 286 mV. The enhanced OER activity is attributed to the unique surface/core structure of NMFP. The surface phosphate acts as a proton transport mediator and expedites the rate‐determining step. With the application of OER potential, the NMFP surface is composed of Ni(OH)₂ and FeOOH, active sites for OER, but the inner core consists of Ni, Mo, and Fe metals, serving as a conductive electron pathway. OWS with NMF‐NMFP requires an applied voltage of 1.452 V to generate 10 mA cm^?2, which is one of the lowest values among OWS results with transition‐metal‐based electrocatalysts. Furthermore, the catalysts are combined with tandem perovskite solar cells for photovoltaic (PV)‐electrolysis, producing a high solar‐to‐hydrogen (STH) conversion efficiency of 12.3%.