Conversion Reaction Mechanism of Ultrafine Bimetallic Co‐Fe Selenides Embedded in Hollow Mesoporous Carbon Nanospheres and Their Excellent K‐Ion Storage Performance

Potassium‐ion batteries (KIBs) are considered as promising alternatives to lithium‐ion batteries owing to the abundance and affordability of potassium. However, the development of suitable electrode materials that can stably store large‐sized K ions remains a challenge. This study proposes a facile impregnation method for synthesizing ultrafine cobalt–iron bimetallic selenides embedded in hollow mesoporous carbon nanospheres (HMCSs) as superior anodes for KIBs. This involves loading metal precursors into HMCS templates using a repeated “drop and drying” process followed by selenization at various temperatures, facilitating not only the preparation of bimetallic selenide/carbon composites but also controlling their structures. HMCSs serve as structural skeletons, conductive templates, and vehicles to restrain the overgrowth of bimetallic selenide particles during thermal treatment. Various analysis strategies are employed to investigate the charge–discharge mechanism of the new bimetallic selenide anodes. This unique‐structured composite exhibits a high discharge capacity (485 mA h g^?1 at 0.1 A g^?1 after 200 cycles) and enhanced rate capability (272 mA h g^?1 at 2.0 A g^?1) as a promising anode material for KIBs. Furthermore, the electrochemical properties of various nanostructures, from hollow to frog egg‐like structures, obtained by adjusting the selenization temperature, are compared.     

Surface‐Engineered Black Niobium Oxide@Graphene Nanosheets for High‐Performance Sodium‐/Potassium‐Ion Full Batteries

Nanoscale surface‐engineering plays an important role in improving the performance of battery electrodes. Nb₂O₅ is one typical model anode material with promising high‐rate lithium storage. However, its modest reaction kinetics and low electrical conductivity obstruct the efficient storage of larger ions of sodium or potassium. In this work, partially surface‐amorphized and defect‐rich black niobium oxide@graphene (black Nb₂O_5?x@rGO) nanosheets are designed to overcome the above Na/K storage problems. The black Nb₂O_5?x@rGO nanosheets electrodes deliver a high‐rate Na and K storage capacity (123 and 73 mAh g^?1, respectively at 3 A g^?1) with long‐term cycling stability. Besides, both Na‐ion and K‐ion full batteries based on black Nb₂O_5?x@rGO nanosheets anodes and vanadate‐based cathodes (Na_0.33V₂O₅ and K_0.5V₂O₅ for Na‐ion and K‐ion full batteries, respectively) demonstrate promising rate and cycling performance. Notably, the K‐ion full battery delivers higher energy and power densities (172 Wh Kg^?1 and 430 W Kg^?1), comparable to those reported in state‐of‐the‐art K‐ion full batteries, accompanying with a capacity retention of ≈81.3% over 270 cycles. This result on Na‐/K‐ion batteries may pave the way to next‐generation post‐lithium batteries.     

CuO Nanoplates for High‐Performance Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) are promising alternatives to lithium‐ion batteries because of the abundance and low cost of K. However, an important challenge faced by KIBs is the search for high‐capacity materials that can hold large‐diameter K ions. Herein, copper oxide (CuO) nanoplates are synthesized as high‐performance anode materials for KIBs. CuO nanoplates with a thickness of ≈20 nm afford a large electrode–electrolyte contact interface and short K⁺ ion diffusion distance. As a consequence, a reversible capacity of 342.5 mAh g^?1 is delivered by the as‐prepared CuO nanoplate electrode at 0.2 A g^?1. Even after 100 cycles at a high current density of 1.0 A g^?1, the capacity of the electrode remains over 206 mAh g^?1, which is among the best values for KIB anodes reported in the literature. Moreover, a conversion reaction occurs at the CuO anode. Cu nanoparticles form during the first potassiation process and reoxidize to Cu₂O during the depotassiation process. Thereafter, the conversion reaction proceeds between the as‐formed Cu₂O and Cu, yielding a reversible theoretical capacity of 374 mAh g^?1. Considering their low cost, easy preparation, and environmental benignity, CuO nanoplates are promising KIB anode materials.     

Ultrafast Sodium/Potassium‐Ion Intercalation into Hierarchically Porous Thin Carbon Shells

The large‐scale application of sodium/potassium‐ion batteries is severely limited by the low and slow charge storage dynamics of electrode materials. The crystalline carbons exhibit poor insertion capability of large Na⁺/K⁺ ions, which limits the storage capability of Na/K batteries. Herein, porous S and N co‐doped thin carbon (S/N@C) with shell‐like (shell size ≈20–30 nm, shell wall ≈8–10 nm) morphology for enhanced Na⁺/K⁺ storage is presented. Thanks to the hollow structure and thin shell‐wall, S/N@C exhibits an excellent Na⁺/K⁺ storage capability with fast mass transport at higher current densities, leading to limited compromise over charge storage at high charge/discharge rates. The S/N@C delivers a high reversible capacity of 448 mAh g^‐1 for Na battery, at the current density of 100 mA g^‐1 and maintains a discharge capacity up to 337 mAh g^‐1 at 1000 mA g^‐1. Owing to shortened diffusion pathways, S/N@C delivers an unprecedented discharge capacity of 204 and 169 mAh g^‐1 at extremely high current densities of 16 000 and 32 000 mA g^‐1, respectively, with excellent reversible capacity for 4500 cycles. Moreover, S/N@C exhibits high K⁺ storage capability (320 mAh g^‐1 at current density of 50 mA g^‐1) and excellent cyclic life.     

Sulfur‐Grafted Hollow Carbon Spheres for Potassium‐Ion Battery Anodes

Sulfur‐rich carbons are minimally explored for potassium‐ion batteries (KIBs). Here, a large amount of S (38 wt%) is chemically incorporated into a carbon host, creating sulfur‐grafted hollow carbon spheres (SHCS) for KIB anodes. The SHCS architecture provides a combination of nanoscale (≈40 nm) diffusion distances and C? S chemical bonding to minimize cycling capacity decay and Coulombic efficiency (CE) loss. The SHCS exhibit a reversible capacity of 581 mAh g^?1 (at 0.025 A g^?1), which is the highest reversible capacity reported for any carbon‐based KIB anode. Electrochemical analysis of S‐free carbon spheres baseline demonstrates that both the carbon matrix and the sulfur species are highly electrochemically active. SHCS also show excellent rate capability, achieving 202, 160, and 110 mAh g^?1 at 1.5, 3, and 5 A g^?1, respectively. The electrode maintains 93% of the capacity from the 5th to 1000th cycle at 3 A g^?1, with steady‐state CE being near 100%. Raman analysis indicates reversible breakage of C? S and S? S bonds upon potassiation to 0.01 V versus K/K⁺. The galvanostatic intermittent titration technique (GITT) analysis provides voltage‐dependent K⁺ diffusion coefficients that range from 10^?10 to 10^?12 cm² s^?1 upon potassiation and depotassiation, with approximately five times higher coefficient for the former.     

Nitrogen and Phosphorus Codoped Vertical Graphene/Carbon Cloth as a Binder‐Free Anode for Flexible Advanced Potassium Ion Full Batteries

With the fast development in flexible electronic technology, power supply devices with high performance, low‐cost, and flexibility are becoming more and more important. Potassium ion batteries (KIBs) have a brilliant prospect for applications benefiting from high voltage, lost cost, as well as similar electrochemistry to lithium ion batteries (LIBs). Although carbon materials have been studied as KIBs anodes, their rate capability and cycling stability are still unsatisfactory due to the large‐size potassium ions. Herein, a nitrogen (N) and phosphorus (P) dual‐doped vertical graphene (N, P‐VG) uniformly grown on carbon cloth (N, P‐VG@CC) is reported as a binder‐free anode for flexible KIBs. With the combined advantages of rich active sites, highly accessible surface, highly conductive network, larger interlayer spacing as well as robust structural stability, this binder‐free N, P‐VG@CC anode exhibits high capacity (344.3 mAh g^?1), excellent rate capability (2000 mA g^?1; 46.5% capacity retention), and prominent long‐term cycling stability (1000 cycles; 82% capacity retention), outperforming most of the recently reported carbonaceous anodes. Moreover, a potassium ion full cell is successfully assembled on the basis of potassium Prussian blue (KPB)//N, P‐VG@CC, exhibiting a large energy density of 232.5 Wh kg^?1 and outstanding cycle stability.     

An Advanced MoS2/Carbon Anode for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising anode for high performance sodium‐ion batteries due to high specific capacity, abundance, and low cost. However, poor cycling stability, low rate capability and unclear electrochemical reaction mechanism are the main challenges for MoS₂ anode in Na‐ion batteries. In this study, molybdenum disulfide/carbon (MoS₂/C) nanospheres are fabricated and used for Na‐ion battery anodes. MoS₂/C nanospheres deliver a reversible capacity of 520 mAh g^?1 at 0.1 C and maintain at 400 mAh g^?1 for 300 cycles at a high current density of 1 C, demonstrating the best cycling performance of MoS₂ for Na‐ion batteries to date. The high capacity is attributed to the short ion and electron diffusion pathway, which enables fast charge transfer and low concentration polarization. The stable cycling performance and high coulombic efficiency (～100%) of MoS₂/C nanospheres are ascribed to (1) highly reversible conversion reaction of MoS₂ during sodiation/desodiation as evidenced by ex‐situ X‐ray diffraction (XRD) and (2) the formation of a stable solid electrolyte interface (SEI) layer in fluoroethylene carbonate (FEC) based electrolyte as demonstrated by fourier transform infrared spectroscopy (FTIR) measurements.     

A Universal Strategy for Hollow Metal Oxide Nanoparticles Encapsulated into B/N Co‐Doped Graphitic Nanotubes as High‐Performance Lithium‐Ion Battery Anodes

Yolk–shell nanostructures have received great attention for boosting the performance of lithium‐ion batteries because of their obvious advantages in solving the problems associated with large volume change, low conductivity, and short diffusion path for Li⁺ ion transport. A universal strategy for making hollow transition metal oxide (TMO) nanoparticles (NPs) encapsulated into B, N co‐doped graphitic nanotubes (TMO@BNG (TMO = CoO, Ni₂O₃, Mn₃O₄) through combining pyrolysis with an oxidation method is reported herein. The as‐made TMO@BNG exhibits the TMO‐dependent lithium‐ion storage ability, in which CoO@BNG nanotubes exhibit highest lithium‐ion storage capacity of 1554 mA h g^?1 at the current density of 96 mA g^?1, good rate ability (410 mA h g^?1 at 1.75 A g^?1), and high stability (almost 96% storage capacity retention after 480 cycles). The present work highlights the importance of introducing hollow TMO NPs with thin wall into BNG with large surface area for boosting LIBs in the terms of storage capacity, rate capability, and cycling stability.     

General Approach to Produce Nanostructured Binary Transition Metal Selenides as High‐Performance Sodium Ion Battery Anodes

Multiple transition metals containing chalcogenides have recently drawn boosted attraction as anodes for sodium ion batteries (SIBs). Their greatly enhanced electrochemical performances can be attributed to the superior intrinsic conductivities and richer redox reactions, comparative to mono metal chalcogenides. To employ various binary metals comprising selenides (B‐TMSs) for SIBs, discovery of a simplistic, scalable and universal synthesis approach is highly desirable. Herein, a simple, facile, and comprehensive strategy to produce various combinations of nanostructured B‐TMSs is presented. As a proof of concept, optimized, high surface area bearing, and hierarchical nanosheets of iron–nickel selenide (FNSe), iron–cobalt selenide, and nickel–cobalt selenide are produced and employed in SIBs. These B‐TMSs exhibit adequately high energy capacities, excellent rate capabilities, and an extraordinarily stable life of 2600 cycles. As far as it is known, it is the first work to discuss sodium storage of FNSe, so various in situ and ex situ battery analyses are carried out to probe the sodium storage mechanism. When employed in sodium full batteries, these B‐TMSs present reasonably high reversible specific capacities even after 100 cycles. Overall, the presented strategy will pave the way for facile synthesis of numerous binary transition metal chalcogenides that are the potential materials for energy storage and conversion systems.     

A Flexible Sulfur‐Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage

Heteroatom doping is regarded as a promising method to enhance the sodium storage performance of carbon materials. In this work, a sulfur‐enriched N‐doped multichannel hollow carbon nanofiber (denoted as S‐NCNF) film is prepared through electrospinning technology and heat treatment with sublimed sulfur as the flexible anode for sodium ion batteries (NIBs). The S‐NCNF film displays outstanding electrochemical performance, particularly with a high rate capacity (132 mA h g^?1 at the current density of 10 A g^?1) and remarkable long cycling stability (reversible specific capacity of 187 mA h g^?1 at 2 A g^?1 over 2000 cycles). The improved sodium storage performance results from the unique 3D structure, abundant defects, and increased interlayer spacing of S‐NCNFs. The density functional theory calculations demonstrate that nitrogenous carbon nanofibers doping with sulfur could not only promote the adsorption of sodium but also favor electrons' transfer. This strategy has been demonstrated as a general process to design free‐standing carbon‐based thin film with other heteroatom doping.     

Boosting High‐Rate Sodium Storage Performance of N‐Doped Carbon‐Encapsulated Na3V2(PO4)3 Nanoparticles Anchoring on Carbon Cloth

The further development of high‐power sodium‐ion batteries faces the severe challenge of achieving high‐rate cathode materials. Here, an integrated flexible electrode is constructed by smart combination of a conductive carbon cloth fiber skeleton and N‐doped carbon (NC) shell on Na₃V₂(PO₄)₃ (NVP) nanoparticles via a simple impregnation method. In addition to the great electronic conductivity and high flexibility of carbon cloth, the NC shell also promotes ion/electron transport in the electrode. The flexible NVP@NC electrode renders preeminent rate capacities (80.7 mAh g^?1 at 50 C for cathode; 48 mAh g^?1 at 30 C for anode) and superior cycle performance. A flexible symmetric NVP@NC//NVP@NC full cell is endowed with fairly excellent rate performance as well as good cycle stability. The results demonstrate a powerful polybasic strategy design for fabricating electrodes with optimal performance.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Metal Selenides Anode Materials for Sodium Ion Batteries: Synthesis,Modification, and Application (Small 4/2023)

The powerful and rapid development of lithium-ion batteries (LIBs) in secondary batteries field makes lithium resources in short supply, leading to rising battery costs. Under the circumstances, sodium-ion batteries (SIBs) with low cost, inexhaustible sodium reserves, and analogous work principle to LIBs, have evolved as one of the most anticipated candidates for large-scale energy storage devices. Thereinto, the applicable electrode is a core element for the smooth development of SIBs. Among various anode materials, metal selenides (MSe_x) with relatively high theoretical capacity and unique structures have aroused extensive interest. Regrettably, MSe_x suffers from large volume expansion and unwished side reactions, which result in poor electrochemistry performance. Thus, strategies such as carbon modification, structural design, voltage control as well as electrolyte and binder optimization are adopted to alleviate these issues. In this review, the synthesis methods and main reaction mechanisms of MSe_x are systematically summarized. Meanwhile, the major challenges of MSe_x and the corresponding available strategies are proposed. Furthermore, the recent research progress on layered and nonlayered MSe_x for application in SIBs is presented and discussed in detail. Finally, the future development focuses of MSe_x in the field of rechargeable ion batteries are highlighted.     

Na2Ti3O7@N‐Doped Carbon Hollow Spheres for Sodium‐Ion Batteries with Excellent Rate Performance

Uniform Na₂Ti₃O₇ hollow spheres assembled from N‐doped carbon‐coated ultrathin nanosheets are synthesized. A unique multilayer structure of nanosheets is presumed to significantly reduce energy consumption during the diffusion process of sodium ions, while the carbon‐coated structure can increase the overall conductivity. The as‐prepared sample used as an anode in sodium‐ion batteries exhibits the best rate performance ever reported for Na₂Ti₃O₇, delivering more than 60 mAh g^?1 after 1000 continuous cycles at the high rate of 50 C, which was achieved due to its unique structure.     

High‐Energy/Power and Low‐Temperature Cathode for Sodium‐Ion Batteries: In Situ XRD Study and Superior Full‐Cell Performance

Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely hinder their practical applications. Here, a high‐voltage cathode composed of Na₃V₂(PO₄)₂O₂F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na⁺/Na with a specific capacity of 127.8 mA h g^?1. The energy density of NVPF‐NTP reaches up to 486 W h kg^?1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.