Hierarchical 3D All‐Carbon Composite Structure Modified with N‐Doped Graphene Quantum Dots for High‐Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all‐carbon electrode materials are prepared by assembling N‐doped graphene quantum dots (N‐GQDs) on carbonized MOF materials (cZIF‐8) interweaved with carbon nanotubes (CNTs) for flexible all‐solid‐state supercapacitors. In this ternary electrode, cZIF‐8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N‐GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N‐GQD@cZIF‐8/CNT electrodes exhibit a high specific capacitance of 540 F g^?1 at 0.5 A g^?1 in a 1 m H₂SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^?1 with a power density of 108.7 W kg^?1. Meanwhile, three supercapacitors connected in series can power light‐emitting diodes for 20 min. All‐solid‐state N‐GQD@cZIF‐8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^?1 with a power density of 89.3 W kg^?1, while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high‐performance energy storage devices via the rational design.     

Phosphorus‐Mediated MoS2 Nanowires as a High‐Performance Electrode Material for Quasi‐Solid‐State Sodium‐Ion Intercalation Supercapacitors

Molybdenum disulfide (MoS₂) is a promising electrode material for electrochemical energy storage owing to its high theoretical specific capacity and fascinating 2D layered structure. However, its sluggish kinetics for ionic diffusion and charge transfer limits its practical applications. Here, a promising strategy is reported for enhancing the Na⁺‐ion charge storage kinetics of MoS₂ for supercapacitors. In this strategy, electrical conductivity is enhanced and the diffusion barrier of Na⁺ ion is lowered by a facile phosphorus‐doping treatment. Density functional theory results reveal that the lowest energy barrier of dilute Na‐vacancy diffusion on P‐doped MoS₂ (0.11 eV) is considerably lower than that on pure MoS₂ (0.19 eV), thereby signifying a prominent rate performance at high Na intercalation stages upon P‐doping. Moreover, the Na‐vacancy diffusion coefficient of the P‐doped MoS₂ at room temperatures can be enhanced substantially by approximately two orders of magnitude (10^?6–10^?4 cm² s^?1) compared with pure MoS₂. Finally, the quasi‐solid‐state asymmetrical supercapacitor assembled with P‐doped MoS₂ and MnO₂, as the positive and negative electrode materials, respectively, exhibits an ultrahigh energy density of 67.4 W h kg^?1 at 850 W kg^?1 and excellent cycling stability with 93.4% capacitance retention after 5000 cycles at 8 A g^?1.     

One‐Step Synthesis of Monodispersed Mesoporous Carbon Nanospheres for High‐Performance Flexible Quasi‐Solid‐State Micro‐Supercapacitors

Cost‐effective synthesis of carbon nanospheres with a desirable mesoporous network for diversified energy storage applications remains a challenge. Herein, a direct templating strategy is developed to fabricate monodispersed N‐doped mesoporous carbon nanospheres (NMCSs) with an average particle size of 100 nm, a pore diameter of 4 nm, and a specific area of 1093 m² g^?1. Hexadecyl trimethyl ammonium bromide and tetraethyl orthosilicate not only play key roles in the evolution of mesopores but also guide the assembly of phenolic resins to generate carbon nanospheres. Benefiting from the high surface area and optimum mesopore structure, NMCSs deliver a large specific capacitance up to 433 F g^?1 in 1 m H₂SO₄. The NMCS electrodes–based symmetric sandwich supercapacitor has an output voltage of 1.4 V in polyvinyl alcohol/H₂SO₄ gel electrolyte and delivers an energy density of 10.9 Wh kg^?1 at a power density of 14014.5 W kg^?1. Notably, NMCSs can be directly applied through the mask‐assisted casting technique by a doctor blade to fabricate micro‐supercapacitors. The micro‐supercapacitors exhibit excellent mechanical flexibility, long‐term stability, and reliable power output.     

High‐Stacking‐Density,Superior‐Roughness LDH Bridged with Vertically Aligned Graphene for High‐Performance Asymmetric Supercapacitors

The high‐performance electrode materials with tuned surface and interface structure and functionalities are highly demanded for advanced supercapacitors. A novel strategy is presented to conFigure high‐stacking‐density, superior‐roughness nickel manganese layered double hydroxide (LDH) bridged by vertically aligned graphene (VG) with nickel foam (NF) as the conductive collector, yielding the LDH‐NF@VG hybrids for asymmetric supercapacitors. The VG nanosheets provide numerous electron transfer channels for quick redox reactions, and well‐developed open structure for fast mass transport. Moreover, the high‐stacking‐density LDH grown and assembled on VG nanosheets result in a superior hydrophilicity derived from the tuned nano/microstructures, especially microroughness. Such a high stacking density with abundant active sites and superior wettability can be easily accessed by aqueous electrolytes. Benefitting from the above features, the LDH‐NF@VG can deliver a high capacitance of 2920 F g^?1 at a current density of 2 A g^?1, and the asymmetric supercapacitor with the LDH‐NF@VG as positive electrode and activated carbon as negative electrode can deliver a high energy density of 56.8 Wh kg^?1 at a power density of 260 W kg^?1, with a high specific capacitance retention rate of 87% even after 10 000 cycles.     

Strongly Coupled Pyridine‐V2O5·nH2O Nanowires with Intercalation Pseudocapacitance and Stabilized Layer for High Energy Sodium Ion Capacitors

Developing pseudocapacitive cathodes for sodium ion capacitors (SICs) is very significant for enhancing energy density of SICs. Vanadium oxides cathodes with pseudocapacitive behavior are able to offer high capacity. However, the capacity fading caused by the irreversible collapse of layer structure remains a major issue. Herein, based on the Acid–Base Proton theory, a strongly coupled layered pyridine‐V₂O₅·nH₂O nanowires cathode is reported for highly efficient sodium ion storage. By density functional theory calculations, in situ X‐ray diffraction, and ex situ Fourier‐transform infrared spectroscopy, a strong interaction between protonated pyridine and V?O group is confirmed and stable during cycling. The pyridine‐V₂O₅·nH₂O nanowires deliver long‐term cyclability (over 3000 cycles), large pseudocapacitive behavior (78% capacitive contribution at 1 mV s^?1) and outstanding rate capability. The assembled pyridine‐V₂O₅·nH₂O//graphitic mesocarbon microbead SIC delivers high energy density of ≈96 Wh kg^?1 (at 59 W kg^?1) and power density of 14 kW kg^?1 (at 37.5 Wh kg^?1). The present work highlights the strategy of realizing strong interaction in the interlayer of V₂O₅·nH₂O to enhance the electrochemical performance of vanadium oxides cathodes. The strategy could be extended for improving the electrochemical performance of other layered materials.     

Efficient Supercapacitor Energy Storage Using Conjugated Microporous Polymer Networks Synthesized from Buchwald–Hartwig Coupling

Supercapacitors have received increasing interest as energy storage devices due to their rapid charge–discharge rates, high power densities, and high durability. In this work, novel conjugated microporous polymer (CMP) networks are presented for supercapacitor energy storage, namely 3D polyaminoanthraquinone (PAQ) networks synthesized via Buchwald–Hartwig coupling between 2,6‐diaminoanthraquinone and aryl bromides. PAQs exhibit surface areas up to 600 m² g^?1, good dispersibility in polar solvents, and can be processed to flexible electrodes. The PAQs exhibit a three‐electrode specific capacitance of 576 F g^?1 in 0.5 m H₂SO₄ at a current of 1 A g^?1 retaining 80–85% capacitances and nearly 100% Coulombic efficiencies (95–98%) upon 6000 cycles at a current density of 2 A g^?1. Asymmetric two‐electrode supercapacitors assembled by PAQs show a capacitance of 168 F g^?1 of total electrode materials, an energy density of 60 Wh kg^?1 at a power density of 1300 W kg^?1, and a wide working potential window (0–1.6 V). The asymmetric supercapacitors show Coulombic efficiencies up to 97% and can retain 95.5% of initial capacitance undergo 2000 cycles. This work thus presents novel promising CMP networks for charge energy storage.     

Ionic Liquid‐Controlled Growth of NiCo2S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors

A significant development in the design of a NiCo₂S₄ 3D hierarchical hollow nanoarrow arrays (HNA)‐based supercapacitor binder free electrode assembled by 1D hollow nanoneedles and 2D nanosheets on a Ni foam collector through controlling ionic liquid 1‐octyl‐3‐methylimidazolium chloride ([OMIm]Cl) concentration is reported. The unique NiCo₂S₄‐HNA electrode acquires high specific capacity (1297 C g^?1 at 1 A g^?1, 2.59 C cm^?2 at 2 mA cm^?2), excellent rate capability (maintaining 73.0% at 20 A g^?1), and long operational life (maintaining 92.4% after 10 000 cycles at 5 A g^?1), which are superior to those for 1D hollow nanoneedle arrays (HNN) and 2D porous nanoflake arrays (PNF). The outstanding electrochemical performance is attributed to the novel 3D structure with large specific surface, hollow cores, high porosity as well as stable architecture. In addition, a hybrid supercapacitor applying 3D NiCo₂S₄‐HNA as the positive electrode and active carbon as the negative electrode exhibits a high energy density of 42.5 Wh kg^?1 at a power density of 2684.2 W kg^?1 in an operating voltage of 1.6 V. Robust cycling stability is also expressed with 84.9% retention after repeating 10 000 cycles at 5 A g^?1, implying their great potential in superior‐performance supercapacitors.     

MoS2/NiS Yolk–Shell Microsphere‐Based Electrodes for Overall Water Splitting and Asymmetric Supercapacitor

Rational designing of the composition and structure of electrode material is of great significance for achieving highly efficient energy storage and conversion in electrochemical energy devices. Herein, MoS₂/NiS yolk–shell microspheres are successfully synthesized via a facile ionic liquid‐assisted one‐step hydrothermal method. With the favorable interface effect and hollow structure, the electrodes assembled with MoS₂/NiS hybrid microspheres present remarkably enhanced electrochemical performance for both overall water splitting and asymmetric supercapacitors. In particular, to deliver a current density of 10 mA cm^?2, the MoS₂/NiS‐based electrolysis cell for overall water splitting only needs an output voltage of 1.64 V in the alkaline medium, lower than that of Pt/C–IrO₂‐based electrolysis cells (1.70 V). As an electrode for supercapacitors, the MoS₂/NiS hybrid microspheres exhibit a specific capacitance of 1493 F g^?1 at current density of 0.2 A g^?1, and remain 1165 F g^?1 even at a large current density of 2 A g^?1, implying outstanding charge storage capacity and excellent rate performance. The MoS₂/NiS‐ and active carbon‐based asymmetric supercapacitor manifests a maximum energy density of 31 Wh kg^?1 at a power density of 155.7 W kg^?1, and remarkable cycling stability with a capacitance retention of approximately 100% after 10 000 cycles.     

Water‐Lubricated Intercalation in V2O5·nH2O for High‐Capacity and High‐Rate Aqueous Rechargeable Zinc Batteries

Low‐cost, environment‐friendly aqueous Zn batteries have great potential for large‐scale energy storage, but the intercalation of zinc ions in the cathode materials is challenging and complex. Herein, the critical role of structural H₂O on Zn²⁺ intercalation into bilayer V₂O₅·nH₂O is demonstrated. The results suggest that the H₂O‐solvated Zn²⁺ possesses largely reduced effective charge and thus reduced electrostatic interactions with the V₂O₅ framework, effectively promoting its diffusion. Benefited from the “lubricating” effect, the aqueous Zn battery shows a specific energy of ≈144 Wh kg^?1 at 0.3 A g^?1. Meanwhile, it can maintain an energy density of 90 Wh kg^?1 at a high power density of 6.4 kW kg^?1 (based on the cathode and 200% Zn anode), making it a promising candidate for high‐performance, low‐cost, safe, and environment‐friendly energy‐storage devices.     

Novel Skutterudite CoP3–Based Asymmetric Supercapacitor with Super High Energy Density

Skutterudite CoP₃ holds a unique structural formation that exhibits much better electronic properties for obtaining high energy density supercapacitors. Herein, novel skutterudite Ni–CoP₃ nanosheets are constructed by etching and coprecipitating at room temperature and subsequent low‐temperature phosphorization reaction. Benefiting from the enhanced electrical conductivity and more electroactive sites brought about by adjusting the electronic structure with Ni incorporating the Ni–CoP₃ electrode with a battery‐type demonstrates an ultrahigh specific capacity of 0.7 mA h cm^?2 and exceptional cycling stability. The asymmetric supercapacitor (ASC) device fabricated by employing Ni–CoP₃ and activated carbon (AC) as positive and negative electrodes, resepectively, exhibits a remarkable high energy density of 89.6 Wh kg^?1 at 796 W kg^?1 and excellent stability of 93% after 10 000 cycles, due to the skutterudite structure. The skutterudite Ni–CoP₃ shows a great potential to be an excellent next‐generation electrode candidate for supercapacitors and other energy storage devices.     

Sulfur‐Deficient Bismuth Sulfide/Nitrogen‐Doped Carbon Nanofibers as Advanced Free‐Standing Electrode for Asymmetric Supercapacitors

The use of free‐standing carbon‐based hybrids plays a crucial role to help fulfil ever‐increasing energy storage demands, but is greatly hindered by the limited number of active sites for fast charge adsorption/desorption processes. Herein, an efficient strategy is demonstrated for making defect‐rich bismuth sulfides in combination with surface nitrogen‐doped carbon nanofibers (dr‐Bi₂S₃/S‐NCNF) as flexible free‐standing electrodes for asymmetric supercapacitors. The dr‐Bi₂S₃/S‐NCNF composite exhibits superior electrochemical performances with an enhanced specific capacitance of 466 F g^?1 at a discharge current density of 1 A g^?1. The high performance of dr‐Bi₂S₃/S‐NCNF electrodes originates from its hierarchical structure of nitrogen‐doped carbon nanofibers with well‐anchored defect‐rich bismuth sulfides nanostructures. As modeled by density functional theory calculation, the dr‐Bi₂S₃/S‐NCNF electrodes exhibit a reduced OH^? adsorption energy of ‐3.15 eV, compared with that (–3.06 eV) of defect‐free bismuth sulfides/surface nitrogen‐doped carbon nanofiber (df‐Bi₂S₃/S‐NCNF). An asymmetric supercapacitor is further fabricated by utilizing dr‐Bi₂S₃/S‐NCNF hybrid as the negative electrode and S‐NCNF as the positive electrode. This composite exhibits a high energy density of 22.2 Wh kg^?1 at a power density of 677.3 W kg^?1. This work demonstrates a feasible strategy to construct advanced metal sulfide‐based free‐standing electrodes by incorporating defect‐rich structures using surface engineering principles.     

Biomass‐Derived Nitrogen‐Doped Carbon Nanofiber Network: A Facile Template for Decoration of Ultrathin Nickel‐Cobalt Layered Double Hydroxide Nanosheets as High‐Performance Asymmetric Supercapacitor Electrode

The development of biomass‐based energy storage devices is an emerging trend to reduce the ever‐increasing consumption of non‐renewable resources. Here, nitrogen‐doped carbonized bacterial cellulose (CBC‐N) nanofibers are obtained by one‐step carbonization of polyaniline coated bacterial cellulose (BC) nanofibers, which not only display excellent capacitive performance as the supercapacitor electrode, but also act as 3D bio‐template for further deposition of ultrathin nickel‐cobalt layered double hydroxide (Ni‐Co LDH) nanosheets. The as‐obtained CBC‐N@LDH composite electrodes exhibit significantly enhanced specific capacitance (1949.5 F g^?1 at a discharge current density of 1 A g^?1, based on active materials), high capacitance retention of 54.7% even at a high discharge current density of 10 A g^?1 and excellent cycling stability of 74.4% retention after 5000 cycles. Furthermore, asymmetric supercapacitors (ASCs) are constructed using CBC‐N@LDH composites as positive electrode materials and CBC‐N nanofibers as negative electrode materials. By virtue of the intrinsic pseudocapacitive characteristics of CBC‐N@LDH composites and 3D nitrogen‐doped carbon nanofiber networks, the developed ASC exhibits high energy density of 36.3 Wh kg^?1 at the power density of 800.2 W kg^?1. Therefore, this work presents a novel protocol for the large‐scale production of biomass‐derived high‐performance electrode materials in practical supercapacitor applications.     

Phosphorus Regulated Cobalt Oxide@Nitrogen‐Doped Carbon Nanowires for Flexible Quasi‐Solid‐State Supercapacitors

Battery‐type materials are promising candidates for achieving high specific capacity for supercapacitors. However, their slow reaction kinetics hinders the improvement in electrochemical performance. Herein, a hybrid structure of P‐doped Co₃O₄ (P‐Co₃O₄) ultrafine nanoparticles in situ encapsulated into P, N co‐doped carbon (P, N‐C) nanowires by a pyrolysis–oxidation–phosphorization of 1D metal–organic frameworks derived from Co‐layered double hydroxide as self‐template and reactant is reported. This hybrid structure prevents active material agglomeration and maintains a 1D oriented arrangement, which exhibits a large accessible surface area and hierarchically porous feature, enabling sufficient permeation and transfer of electrolyte ions. Theoretical calculations demonstrate that the P dopants in P‐Co₃O₄@P, N‐C could reduce the adsorption energy of OH^? and regulate the electrical properties. Accordingly, the P‐Co₃O₄@P, N‐C delivers a high specific capacity of 669 mC cm^?2 at 1 mA cm^?2 and an ultralong cycle life with only 4.8% loss over 5000 cycles at 30 mA cm^?2. During the fabrication of P‐Co₃O₄@P, N‐C, Co@P, N‐C is simultaneously developed, which can be integrated with P‐Co₃O₄@P, N‐C for the assembly of asymmetric supercapacitors. These devices achieve a high energy density of 47.6 W h kg^?1 at 750 W kg^?1 and impressive flexibility, exhibiting a great potential in practical applications.     

Core–Shell Nitrogen‐Doped Carbon Hollow Spheres/Co3O4 Nanosheets as Advanced Electrode for High‐Performance Supercapacitor

Co₃O₄/nitrogen‐doped carbon hollow spheres (Co₃O₄/NHCSs) with hierarchical structures are synthesized by virtue of a hydrothermal method and subsequent calcination treatment. NHCSs, as a hard template, can aid the generation of Co₃O₄ nanosheets on its surface; while SiO₂ spheres, as a sacrificed‐template, can be dissolved in the process. The prepared Co₃O₄/NHCS composites are investigated as the electrode active material. This composite exhibits an enhanced performance than Co₃O₄ itself. A higher specific capacitance of 581 F g^?1 at 1 A g^?1 and a higher rate performance of 91.6% retention at 20 A g^?1 are achieved, better than Co₃O₄ nanorods (318 F g^?1 at 1 A g^?1 and 67.1% retention at 20 A g^?1). In addition, the composite is employed as a positive electrode to fabricate an asymmetric supercapacitor. The device can deliver a high energy density of 34.5 Wh kg^?1 at the power density of 753 W kg^?1 and display a desirable cycling stability. All of these attractive results make the unique hierarchical Co₃O₄/NHCS core–shell structure a promising electrode material for high‐performance supercapacitors.     

Co Nanoparticles Confined in 3D Nitrogen‐Doped Porous Carbon Foams as Bifunctional Electrocatalysts for Long‐Life Rechargeable Zn–Air Batteries

Proper design and simple preparation of nonnoble bifunctional electrocatalysts with high cost performance and strong durability for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is highly demanded but still full of enormous challenges. In this work, a spontaneous gas‐foaming strategy is presented to synthesize cobalt nanoparticles confined in 3D nitrogen‐doped porous carbon foams (CoNCF) by simply carbonizing the mixture of citric acid, NH₄Cl, and Co(NO₃)₂·6H₂O. Thanks to its particular 3D porous foam architecture, ultrahigh specific surface area (1641 m² g^?1), and homogeneous distribution of active sites (C–N, Co–N_x, and Co–O moieties), the optimized CoNCF‐1000‐80 (carbonized at 1000 °C, containing 80 mg Co(NO₃)₂·6H₂O in precursors) catalyst exhibits a remarkable bifunctional activity and long‐term durability toward both ORR and OER. Its bifunctional activity parameter (ΔE) is as low as 0.84 V, which is much smaller than that of noble metal catalyst and comparable to state‐of‐the‐art bifunctional catalysts. When worked as an air electrode catalyst in rechargeable Zn–air batteries, a high energy density (797 Wh kg^?1), a low charge/discharge voltage gap (0.75 V), and a long‐term cycle stability (over 166 h) are achieved at 10 mA cm^?2.     

Mesopore‐Induced Ultrafast Na+‐Storage in T‐Nb2O5/Carbon Nanofiber Films toward Flexible High‐Power Na‐Ion Capacitors

Hybrid Na‐ion capacitors (NICs) are receiving considerable interest because they combine the merits of both batteries and supercapacitors and because of the low‐cost of sodium resources. However, further large‐scale deployment of NICs is impeded by the sluggish diffusion of Na⁺ in the anode. To achieve rapid redox kinetics, herein the controlled fabrication of mesoporous orthorhombic‐Nb₂O₅ (T‐Nb₂O₅)/carbon nanofiber (CNF) networks is demonstrated via in situ SiO₂‐etching. The as‐obtained mesoporous T‐Nb₂O₅ (m‐Nb₂O₅)/CNF membranes are mechanically flexible without using any additives, binders, or current collectors. The in situ formed mesopores can efficiently increase Na⁺‐storage performances of the m‐Nb₂O₅/CNF electrode, such as excellent rate capability (up to 150 C) and outstanding cyclability (94% retention after 10 000 cycles at 100 C). A flexible NIC device based on the m‐Nb₂O₅/CNF anode and the graphene framework (GF)/mesoporous carbon nanofiber (mCNF) cathode, is further constructed, and delivers an ultrahigh power density of 60 kW kg^?1 at 55 Wh kg^?1 (based on the total weight of m‐Nb₂O₅/CNF and GF/mCNF). More importantly, owing to the free‐standing flexible electrode configuration, the m‐Nb₂O₅/CNF//GF/mCNF NIC exhibits high volumetric energy and power densities (11.2 mWh cm^?3, 5.4 W cm^?3) based on the full device, which holds great promise in a wide variety of flexible electronics.     

Rational Construction of Hollow Core‐Branch CoSe2 Nanoarrays for High‐Performance Asymmetric Supercapacitor and Efficient Oxygen Evolution

Metal selenides have great potential for electrochemical energy storage, but are relatively scarce investigated. Herein, a novel hollow core‐branch CoSe₂ nanoarray on carbon cloth is designed by a facile selenization reaction of predesigned CoO nanocones. And the electrochemical reaction mechanism of CoSe₂ in supercapacitor is studied in detail for the first time. Compared with CoO, the hollow core‐branch CoSe₂ has both larger specific surface area and higher electrical conductivity. When tested as a supercapacitor positive electrode, the CoSe₂ delivers a high specific capacitance of 759.5 F g^?1 at 1 mA cm^?2, which is much larger than that of CoO nanocones (319.5 F g^?1). In addition, the CoSe₂ electrode exhibits excellent cycling stability in that a capacitance retention of 94.5% can be maintained after 5000 charge–discharge cycles at 5 mA cm^?2. An asymmetric supercapacitor using the CoSe₂ as cathode and an N‐doped carbon nanowall as anode is further assembled, which show a high energy density of 32.2 Wh kg^?1 at a power density of 1914.7 W kg^?1, and maintains 24.9 Wh kg^?1 when power density increased to 7354.8 W kg^?1. Moreover, the CoSe₂ electrode also exhibits better oxygen evolution reaction activity than that of CoO.     

Controllable Synthesis of Atomically Thin Type‐II Weyl Semimetal WTe2 Nanosheets: An Advanced Electrode Material for All‐Solid‐State Flexible Supercapacitors

Compared with 2D S‐based and Se‐based transition metal dichalcogenides (TMDs), Te‐based TMDs display much better electrical conductivities, which will be beneficial to enhance the capacitances in supercapacitors. However, to date, the reports about the applications of Te‐based TMDs in supercapacitors are quite rare. Herein, the first supercapacitor example of the Te‐based TMD is reported: the type‐II Weyl semimetal 1Td WTe₂. It is demonstrated that single crystals of 1Td WTe₂ can be exfoliated into the nanosheets with 2–7 layers by liquid‐phase exfoliation, which are assembled into air‐stable films and further all‐solid‐state flexible supercapacitors. The resulting supercapacitors deliver a mass capacitance of 221 F g^?1 and a stack capacitance of 74 F cm^?3. Furthermore, they also show excellent volumetric energy and power densities of 0.01 Wh cm^?3 and 83.6 W cm^?3, respectively, superior to the commercial 4V/500 µAh Li thin‐film battery and the commercial 3V/300 µAh Al electrolytic capacitor, in association with outstanding mechanical flexibility and superior cycling stability (capacitance retention of ≈91% after 5500 cycles). These results indicate that the 1Td WTe₂ nanosheet is a promising flexible electrode material for high‐performance energy storage devices.     

A Flexible Ionic Liquid Gelled PVA‐Li2SO4 Polymer Electrolyte for Semi‐Solid‐State Supercapacitors

A novel high‐performance flexible gel polymer electrolyte (FGPE) for supercapacitors is prepared by a freeze‐drying method. In the presence of 1‐butyl‐3‐methylimidazolium chloride (BMIMCl) ionic liquid, Li₂SO₄ can easily be added into poly(vinyl alcohol) (PVA) aqueous solution over a large concentration range. The resultant FGPE demonstrates considerably high ionic conductivity (37 mS cm⁻¹) and a high fracture strain at 100% elongation at the optimal weight ratio of PVA:BMIMCl:Li₂SO₄ = 1:3:2.2. The supercapacitor fabricated with the resultant FGPE and activated carbon electrodes shows an electrode‐specific capacitance of 136 F g⁻¹ with a stable operating voltage of 1.5 V, a maximum energy density of 10.6 Wh kg⁻¹, and a power density of 3400 W kg⁻¹. Double supercapacitors in series can efficiently drive a light emitting diode (LED) bulb for over 5 min and the retention of the specific capacitance reaches 90% even after 3000 charge–discharge cycles. The ionic conductivity and charge–discharge behaviors of the resultant FGPE are not affected by bending up to 180°. The flexible supercapacitor device shows only a small capacitance loss of 18% after 1000 cycles of 135° bending.     

High Performance of N‐Doped Graphene with Bubble‐like Textures for Supercapacitors

Nitrogen‐doped graphene (NG) with wrinkled and bubble‐like texture is fabricated by a thermal treatment. Especially, a novel sonication‐assisted pretreatment with nitric acid is used to further oxidize graphene oxide and its binding with melamine molecules. There are many bubble‐like nanoflakes with a dimension of about 10 nm appeared on the undulated graphene nanosheets. The bubble‐like texture provides more active sites for effective ion transport and reversible capacitive behavior. The specific surface area of NG (5.03 at% N) can reach up to 438.7 m² g^?1, and the NG electrode demonstrates high specific capacitance (481 F g^?1 at 1 A g^?1, four times higher than reduced graphene oxide electrode (127.5 F g^?1)), superior cycle stability (the capacitance retention of 98.9% in 2 m KOH and 99.2% in 1 m H₂SO₄ after 8000 cycles), and excellent energy density (42.8 Wh kg^?1 at power density of 500 W kg^?1 in 2 m KOH aqueous electrolyte). The results indicate the potential use of NG as graphene‐based electrode material for energy storage devices.