Controlling fat bloom formation in chocolate – Impact of milk fat on microstructure and fat phase crystallisation

The partial replacement of cocoa butter (CB) with milk fat (MF) strongly influences micro-scale topographic evolution and fat phase crystallisation in milk chocolate. Adding MF reduces the incidence of large surface crystals and the number and diameter of amorphous, welled CB deposits (‘cones’), with a concurrent decrease in initial surface roughness (p < 0.05) and rate of surface coarsening. Presence of MF also slows the solidification of the cones into disorganised crystalline masses. Finally, MF reduces the initial solid fat content, and slows the rate of change in whiteness index, as well as the form V to VI polymorphic transition. Fat crystal growth is accelerated by repeated temperature-cycling (26–29 °C) compared to isothermal conditioning (26 °C). However, cone hardening occurs more rapidly when isothermally-stored. Irrespective of fat composition and storage conditions, fat crystal growth, welling and ultimately fat bloom begin only at specific locations on the chocolate surface, suggesting that chocolate’s microstructural heterogeneity is responsible for distinct surface fat crystallisation pathways.     

Effect of mechanical treatments applied to milk fat on fat retention and lipolysis in minicurds

The aim of this work was to identify a treatment on milk fat, applicable to pretreat cheese milk, which could enhance lipolysis. Three factors were studied in milk fat mixtures: physical treatment (pumping and mechanical agitation), temperature (5, 15, and 45°C) and fat content (5%, 15%, and 30%). Damage to fat globule was estimated by assessing free fat and by phase contrast microscopy. Moderate damage was achieved in a mixture of 30% of fat, treated with mechanical agitation at 2800 rpm/2 min at 5°C. Applying this procedure to prepare minicurds did not modify values of fat content, moisture and lipolysis.     

乳脂肪球膜功能特性的研究进展

乳脂肪以脂肪球的形式存在,乳脂肪球膜是包裹在乳脂肪球周围的三层生物薄膜,具有很高的营养价值。随着食品科学研究的深入和分离技术的发展,乳脂肪球膜中的活性成分及其功能作用正在逐渐被揭示。乳脂肪球膜是含有蛋白质、磷脂、鞘脂、神经节苷脂、胆碱、唾液酸和胆固醇的混合物,这些成分是具有重要功能的食品成分,应用于配方食品生产。本文综述了乳脂肪球膜中常见的蛋白质、脂质及其生物活性,综述了近年来乳脂肪球膜及其成分在改善肠道健康、改善大脑发育、改善肥胖及相关并发症、改善老年人虚弱、抗癌、抗氧化和缓解疲劳等方面的体内研究和临床研究进展,并讨论了其可能的作用机制,以期为乳脂肪球膜配料的研发及其在配方食品中的应用提供借鉴和参考。     

Effect of cooling rate on the structure and mechanical properties of milk fat and lard

The mechanical and thermal properties of a fat crystal network are determined by factors such as chemical composition, solid fat content (SFC), and crystal habit (polymorphism and microstructure). Processing conditions affect the crystallization of fats, thus having an effect on their functional properties. The effects of cooling rate on the macroscopic properties of a fat crystal network were studied by crystallizing anhydrous milk fat (AMF) and lard either rapidly (5 °C/min, Newtonian cooling) or slowly (0.1 °C/min, stepwise cooling). AMF crystallized rapidly was harder than AMF crystallized slowly and had a higher SFC. Moreover, its solid state was in a more metastable polymorphic form. Upon slow crystallization, AMF had a lower SFC and its solid state was in a more stable polymorphic form. AMF crystallized under fast cooling yielded a higher Avrami constant (k), and a lower Avrami exponent (n) than AMF crystallized under slow cooling. The microstructure was also different between the two treatments. When crystallized rapidly, crystallites were numerous and small, while a smaller number of larger crystallites were observed when crystallized slowly. Similar results were observed for lard crystallized under the same conditions. The mechanical properties of both AMF and lard, expressed as hardness, depend on a variety of factors, which include the SFC, polymorphism of the solid state as well as the microstructure of the fat crystal network.     

Comparison of gas chromatographic methods for analysis of butyric acid in milk fat and fats containing milk fat

 The analysis of butyric acid (C4) is of importance for the determination of the proportion of milk fat in mixed fats. Three gas chromatographic methods were compared with regard to their precision for the measurement of C4, i.e. analysis of butyric acid methyl ester after trans-esterification of fat by sodium methylate (method A) or trimethyl sulphonium hydroxide (method B), as well as analysis of free butyric acid (method C), using an internal standard with each method. The examination of 30 milk fats which varied greatly in terms of their C4 content, using methods A, B and C, resulted in mean values of C4 of 3.42 g/100 g fat, 3.71 g/100 g fat and 3.06 g/100 g fat, respectively. The value determined using method B seemed too high, and this may have been due to the presence of co-eluting artefacts, whereas the value determined using method C was clearly too low, and can probably be attributed to losses during sample preparation. The standard deviation (SD) of 0.015 obtained from repeated analyses using method A was quite good. Results obtained using methods B and C had SDs of 0.029 and 0.074, respectively. Different levels of free fatty acids did not affect the results obtained using method A. When method A was checked by analysis of the reference fat, CRM 164, the C4 level determined was found to deviate from the certified C4 content of 3.49 (± 0.06) g/100 g fat by only 0.05 g C4/fat 100 g. Thus method A proved the most suitable for the determination of the proportion of milk fat in mixed fats by analysis of butyric acid. Received: 1 October 1997     

Comparison of gas chromatographic methods for analysis of butyric acid in milk fat and fats containing milk fat

 The analysis of butyric acid (C4) is of importance for the determination of the proportion of milk fat in mixed fats. Three gas chromatographic methods were compared with regard to their precision for the measurement of C4, i.e. analysis of butyric acid methyl ester after trans-esterification of fat by sodium methylate (method A) or trimethyl sulphonium hydroxide (method B), as well as analysis of free butyric acid (method C), using an internal standard with each method. The examination of 30 milk fats which varied greatly in terms of their C4 content, using methods A, B and C, resulted in mean values of C4 of 3.42 g/100 g fat, 3.71 g/100 g fat and 3.06 g/100 g fat, respectively. The value determined using method B seemed too high, and this may have been due to the presence of co-eluting artefacts, whereas the value determined using method C was clearly too low, and can probably be attributed to losses during sample preparation. The standard deviation (SD) of 0.015 obtained from repeated analyses using method A was quite good. Results obtained using methods B and C had SDs of 0.029 and 0.074, respectively. Different levels of free fatty acids did not affect the results obtained using method A. When method A was checked by analysis of the reference fat, CRM 164, the C4 level determined was found to deviate from the certified C4 content of 3.49 (± 0.06) g/100 g fat by only 0.05 g C4/fat 100 g. Thus method A proved the most suitable for the determination of the proportion of milk fat in mixed fats by analysis of butyric acid. Received: 1 October 1997     

Temporal variation of milk fat globule diameter,fat and cholesterol content and milk epithelial cell gene expression in dairy cows

It was possible to show a connection between the temporal variation of milk fat globule diameter, fat and cholesterol content in milk and the expression of candidate genes in the mammary gland epithelial cells in milk. The beginning of lactation corresponded with higher levels of fat and cholesterol in the milk as a result of a higher expression of key enzymes in the purified bovine milk epithelial cells, paralleled with an increase in milk fat globule mean size.     

补喂油菜籽对放牧牦牛乳的影响

研究了补饲经脱毒处理的油菜籽在青草期和枯黄期对放牧牦牛乳的影响。结果表明,对照组(未补饲油菜籽)在青草期和枯黄期中的乳脂率分别是6.58%±0.52%和7.18%±1.04%,与对照组相比,补饲100g/d油菜籽组的乳脂率在青草期和枯黄期都不受影响,补饲200g/d油菜籽组的乳脂率在青草期和枯黄期时分别为5.81%±0.62%和6.53%±0.86%,乳脂率显著降低(P<0.05);在青草期和枯黄期,补饲油菜籽对各试验组的乳产量、乳蛋白率和乳糖率无显著影响,而枯黄期补饲200g/d油菜籽组,乳干物质含量显著降低。     

Effect of addition of gelatin on microstructure of acidic milk gels and yoghurt and on their rheological properties

A study was made of the effect of the addition of gelatin on the microstructure of acid-heat-induced milk gels (90°C, pH=5.3) and yoghurt with and without the addition of 5% of milk solids, and a comparison was made with the microstructure of acidic milk gelatin gels obtained without heating (pH=5.3). It was seen that in the acid-heat-induced gels and in yoghurt the gelatin interacted with the network of milk proteins as a connection between the clusters formed, whereas it was the gelatin alone that was the basis of the formation of the gel when the milk did not reach the casein coagulation point (pH=5.3, unheated). The results of firmness tests indicated that the addition of 1.5% of gelatin developed fairly firm, deformable systems in all the cases studied, with a definite break point and almost total absence of syneresis. Dynamic rheology showed that the yoghurts with added gelatin exhibited more solid-like behaviour than the ones prepared without it.     

On the fractional melting of milk fat and the properties of the fractions

Standard methods of fractionating milk fat from the melt produce solid fractions that exhibit melting at temperatures considerably lower than that used for the fractionation. The use of high concentrations of aqueous detergent, in the presence of ammonia as an aid to centrifugation, has resulted in this solid material being sub-fractionated into a semi-solid, plastic material and a crystalline solid. The technique may be applied directly to milk fat to produce three fractions at a given fractionation temperature. Fatty acid compositions and separations according to triglyceride number are recorded for the parent fats and their fractions. Melting fingerprints, obtained by differential scanning calorimetry, are shown for the various samples, and the heats of melting are discussed.     

Effect of dietary supplementation or cessation of magnesium-based alkalizers on milk fat output in dairy cows under milk fat depression conditions

We aimed to evaluate the effects of dietary supplementation with magnesium oxide and calcium-magnesium dolomite on milk fat synthesis and milk fatty acid profile or persistency in milk fat synthesis after their cessation in dairy cows under milk fat depression conditions. Twenty-four multiparous dairy cows in early lactation (mean ± standard deviation; 112 ± 14 d in milk) were used in a randomized complete block design. Milk fat depression was induced in all cows for 10 d by feeding a diet containing 35.2% starch, 28.7% neutral detergent fiber, and 4.8% total fatty acid (dry matter). The experiment was conducted in 2 periods. During the Mg-supplementation period (d 1–20), cows were randomly assigned to (1) the milk fat depression diet used during the induction phase (control; n = 8), (2) the control diet plus 0.4% magnesium oxide (MG; n = 8), or (3) the control diet plus 0.8% calcium-magnesium dolomite (CMC; n = 8). Compared with the control group, feeding the magnesium-supplemented diets increased milk fat concentration and yield by 12% within 4 d. During the 20-d Mg-supplementation period, both the MG and CMC diets increased milk fat concentration and yield, as well as 3.5% fat-corrected milk and energy-corrected milk yield, without affecting dry matter intake, milk yield, and milk protein and lactose concentrations. In the Mg-cessation period (d 21–30), all cows received the control diet, which resulted in a greater milk fat concentration and yield in the cows that had already received the MG and CMC diets in the Mg-supplementation period. Whereas, milk fat concentration and yield remained high after discontinuation of the magnesium-containing alkalizer until d 27. The difference in milk fat synthesis was associated with lower trans-10 C18:1 (?22%) and higher trans-11 C18:1 (+12.5%) concentrations in milk during the Mg-supplementation period. Furthermore, it was evident that within 2 d of supplementation, the trans-10:trans-11 ratio was lower in MG and CMC cows compared with cows receiving the control. This suggested that the effect of magnesium-based alkalizers on milk fat synthesis was mediated via a shift in ruminal biohydrogenation of cis-9,cis-12 C18:2 in the rumen. In conclusion, abrupt addition of magnesium oxide and calcium-magnesium dolomite increased milk fat synthesis, which persisted for 7 d after cessation of magnesium-based alkalizers. A similar ability to recover milk fat synthesis and normal fatty acid biohydrogenation pathways was observed for magnesium oxide and calcium-magnesium dolomite.     

Comparison of quality characteristics of full fat and low fat paneer developed from yak milk

Growing health concerns of consuming high fat products offer scope to develop low fat foods. Therefore, a study was undertaken to compare quality attributes of full fat and low fat paneer prepared from yak milk. Optimisation of fat to 1% level significantly increased density in yak milk. Moisture and ash significantly increased but yield and fat decreased in low fat yak milk paneer. No significant difference in microbial load was observed between full fat and low fat paneer. An acceptable low fat paneer with improved body and texture can be prepared with 1% fat in yak milk.     

Effect of high‐energy emulsification on properties of commercial low‐temperature pasteurised milk

The present study investigated milk quality through changing physicochemical properties by using high‐energy emulsification (microfluidisation, MF; and ultrasonication, US). The results will aid in making better quality dairy products. MF was more effective in changing the physicochemical properties of milk; compared to US, MF resulted in smaller, monodispersed particles, and MF better inactivated protease activity without changing the pH, lipid oxidation and thermal denaturation of protein during storage periods.     

Effect of nonthermal technologies on the native size distribution of fat globules in bovine cheese-making milk

Milk-fat globule membranes are susceptible to damage by mechanical and thermal processes. This damage is translated into alterations of milk fat structure and functionality of cheese-making milk. The objective of this work was to evaluate the effect of pulsed electrical fields (PEF), high hydrostatic pressure (HHP), and conventional thermal treatments on fat globule size distribution and ζ-potential. Milk was processed by HHP at 400 and 500 MPa for 0–20 min, and with PEF at 36 kV/cm and 42 kV/cm up to 64 pulses. The ζ-potential of HHP and PEF treated milk were − 15.47 mV and − 14.63 mV respectively. HHP treatments induced fat globules flocculation, increasing their mass moment mean diameter. Although PEF processing did not modify the true mean diameter of MFG, it induced small globules to clump together, causing an apparent increment in the population of larger milk-fat globules.

Industrial relevance

The market for traditional raw dairy products has increased in recent times in several regions of the world due to their unique flavor and texture attributes. However, the potential negative implications of consuming raw products limit the growth of this market segment. Manufacture of raw-like cheese from thermally pasteurized milk is not feasible, among other things, because of milk fat globule membrane damage caused by elevated temperatures. Nonthermal food preservation technologies offer the potential to produce milk technically suitable for the industrial manufacture of microbiologically safe raw-like dairy products.     

Effect of the size and interface composition of milk fat globules on their in vitro digestion by the human pancreatic lipase: Native versus homogenized milk fat globules

Although the bioavailability of dietary lipids is of primary importance in human nutrition and health, the mechanisms involved in lipid digestion are not fully understood and are of growing interest. The objective of this study was to determine the effect of the size of milk fat globules and of the composition of their interface on the activity of the human pancreatic lipase (PL). Native milk fat globules of various sizes covered by their biological membrane (MFGM) and homogenized fat globules of various sizes covered by milk proteins were prepared from whole milk and underwent lipolysis by the human PL with colipase and bile salts. A lag phase preceding the hydrolysis of milk TAG occurred with all native milk fat globules samples but not with homogenized milk samples. The kinetic parameters of human PL were determined by measuring the enzyme activity either after the lag phase for native milk fat globules samples or immediately after the addition of the enzyme for homogenized milk samples. The catalytic efficiency of human PL is 4.6-fold higher on small (1.8 μm) than large (6.7 μm) native milk fat globules, related to a 3.6-fold larger available surface. Despite the 25-fold larger available surface, milk TAG from homogenized milk are only 2-fold better hydrolyzed compared to native milk fat globules, as a possible result of a less favourable interface covered by milk proteins. The potential mechanisms involved in native vs. homogenized milk fat globules digestion by the human PL are discussed. Our study highlights the crucial role of the MFGM in the efficient digestion of milk fat globules and brings new insight for the design of dairy products and infant formulas.     

Effect of washing conditions on the recovery of milk fat globule membrane proteins during the isolation of milk fat globule membrane from milk

During the isolation of milk fat globule membrane (MFGM) from milk, washing is considered the most critical stage in which loss of MFGM components occurs. In this study, using a cream separator, the influence of washing on the recovery of MFGM proteins was investigated. The residue of non-MFGM proteins in the MFGM material obtained after washing was quantitatively determined using densitometric analysis of one-dimensional sodium dodecyl sulfate-PAGE after silver staining of the gel. Using deionized water as the washing solution did not increase the loss of MFGM proteins compared with other common salt solutions in terms of recovery of MFGM proteins and contamination with non-MFGM proteins. The increase in wash temperature from 38 to 46°C did not show a significant decrease in yield of MFGM proteins because of variation between the experimental replicates. Coalescence of fat globules occurs during isolation. To increase MFGM purity while maintaining a high MFGM protein recovery, using larger volumes of wash solution is more advisable rather than increasing the number of washings from 2 to 3.     

Effect of enzymatic interesterification on physicochemical properties of mahua oil and kokum fat blend

Speciality fats were prepared by utilising non-traditional fats, such as mahua and kokum, made by enzymatic interesterification (IE). The fats were blended in a 1:1 ratio and subjected to IE for different times of 0.5–24 h, using 1,3-specific lipase, Lipozyme TL IM. DSC cooling and melting thermograms showed a new peak at higher temperature region on IE. The enthalpy of the newly formed peak increased with increase in the time of IE. There was a significant change in the solids fat content with time of IE and this is attributed to the decrease in monounsaturated and disaturated (SUS) types of triglycerides (TGs) and increase in trisaturated TGs. The melting profile of the blend subjected to IE for 1 h resembled that of commercial milk fat and the one interesterified for 6 h showed a wider melting range, similar to that of hydrogenated fats used for culinary and bakery purposes.     

Effect of heat treatment on milk protein functionality at emulsion interfaces. A review

Heat treatment affects the molecular structure of milk proteins at the interfaces of oil-in-water emulsions and in aqueous media. Experimental evidence of the impact of thermal processing on milk protein structure is presented and the contribution of whey proteins and caseins at film formation during emulsification is discussed. Recent advances in understanding the effect of heat treatment in milk protein functionality at emulsion interfaces are reviewed with particular emphasis on the emulsifying ability of whey proteins with or without the presence of the casein fraction. The major findings regarding the destabilizing mechanisms of oil-in-water emulsions brought about by heat-induced denaturation of milk proteins are presented. This paper aims to combine recent knowledge on how thermal processing of milk proteins affects their molecular configurations in bulk and particularly at interfaces, which in turn appear to be important with respect to the physico-chemical properties of milk protein-stabilized emulsions.     

Use of changes in triacylglycerols during ripening of cheeses with high lipolysis levels for detection of milk fat authenticity

The triacylglycerol (TAG) compositions by carbon number during ripening of two Protected Designation of Origin (PDO) cheeses were analysed using short capillary column gas chromatography. Lipolysis levels were high in the Cabrales (blue cheese produced from cows’ milk or from blends of cows’ with goats’ milk) and Majorero goats’ milk cheeses at the end of ripening, with free fatty acid (FFA) levels of around 24 000 ppm and significant changes in the TAG composition. The level of lipolysis in an industrial blue cheese made from ewes’ milk was low, with an FFA value of around 6000 ppm and no significant changes in the TAG composition during ripening. The TAG values recorded for each cheese sample were substituted into the multiple regression equations that have been proposed for use in detecting foreign fats in milk fat. The values thus obtained were within the established ranges in early ripening. In the cheeses with high lipolysis levels during ripening, some of the values obtained fell outside the established ranges. These equations can be potentially useful for detecting foreign fats in these cheeses, when employed early in the ripening period. Furthermore, it is important to take into account that before coming to a conclusion about cheese authenticity, several individual samples should be analysed.     

Physical,textural, and rheological properties of whipped cream affected by milk fat globule membrane protein

This work aims at improving the textural and whipping properties of whipped cream by the addition of milk fat globule membrane protein. The determination of particle size distribution and average diameter of whipped cream showed that the small particle size was shifted to a larger range after milk fat globule membrane protein was added. The average particle size (d_3,2) of whipped cream reached a maximum value of 5.05 µm at 1% milk fat globule membrane protein, while slowly decreased with increasing milk fat globule membrane protein levels from 2% to 5%. In addition, the partial coalescence of fat increased with the increase of milk fat globule membrane protein levels, and the correlation between the whipping time and the overrun of whipped cream was positive. The addition of milk fat globule membrane protein also altered the rheological behaviour of whipped cream, resulting in the increase of modulus G′ and the loss modulus G″. The results also indicated that higher milk fat globule membrane protein level decreased the serum loss of whipped cream while improved its stability. While milk fat globule membrane protein levels had no significant effect on viscosity, its increasing levels effectively improved the hardness, consistency, and viscosity of whipped cream.