面向可充电电池的锂金属负极的枝晶生长:理论基础、影响因素和抑制方法

在全球能源与环境问题日趋紧迫的大背景下,可再生能源的获取与利用途径及高效安全的储能技术的研发一直是工业界和科学界关注的热点之一。锂离子二次电池作为能量存储器件,拥有高比能量、长循环寿命等优点,近十几年来其研究取得了长足进展,并在各类便携式电子设备和电动交通工具中获得了广泛应用。然而,随着各种高性能设备的不断涌现,商业化的锂离子电池越来越难以满足其在能量密度、循环稳定性和安全性等方面的要求。为了进一步提高锂离子电池的能量密度,需要开发出高比容量的负极材料(硅、锡和锂等)以取代传统石墨负极。硅、锡等新式负极材料通过与锂离子反应形成含锂化合物的原理来存储与释放锂离子,完成电池的一个充放电过程。这个过程往往伴随着负极材料体积的剧烈变化,经历较长时间循环使用后会导致负极材料的粉化甚至从集流体上剥离,引起电池容量迅速衰减甚至失效。而锂负极通过锂在负极上的溶解和沉积来完成电池的充放电过程,该过程不存在反应相变所导致的体积变化。另外,锂金属负极材料具有极高的质量比容量(3 860mAh/g)、低密度(0.59g/cm3)和低的还原电位(-3.04V,相比于氢标准电极),被认为是一种理想的可充电电池负极材料。然而,锂的枝晶生长、锂金属电池低的库伦效率和锂的无主体沉积引起的体积膨胀等一些关键问题长期以来制约着锂负极的商业应用。锂的每次沉积都会产生枝晶,在充放电循环中,锂枝晶会导致电池内部短路甚至发生爆炸,带来严重的安全问题。除此之外,锂枝晶还会增加负极表面积,新暴露的锂金属会与电解液反应生成固态电解质膜(Solid electrolyte interface,SEI),这会损耗活性材料以及降低电池的库伦效率。为了解决以上问题,研究者们对锂金属电极进行了许多探索,尤其是在锂枝晶生长的机理及其抑制方法方面。一些理论模型如扩散模型、SEI保护模型、电荷诱导生长模型和薄膜生长模型等,以及与这些模型相对应的一些抑制方法如均匀锂离子流法、SEI膜保护法、稳定沉积主体法和静电屏蔽保护法等被提出。这些抑制方法能够在一定程度上缓解锂枝晶的生长问题,但都未能达到商业化应用的要求。本文总结了近几年研究人员针对锂离子电池锂金属负极的一些重要研究,系统地介绍了业内较为认同的枝晶生长模型和影响因素,并着重叙述了抑制枝晶生长的方法及成效,最后就锂金属负极将来的研究方向给出一些建议。     

A Highly Reversible,Dendrite-Free Lithium Metal Anode Enabled by a Lithium-Fluoride-Enriched Interphase

Metallic lithium is the most competitive anode material for next-generation lithium (Li)-ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)-enriched solid electrolyte interphase (SEI) through the lithiation of surface-fluorinated mesocarbon microbeads (MCMB-F) anodes. The robust LiF-enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF-enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm⁻², a high CE of >99.2% for Li plating/stripping in FEC-based electrolyte is achieved within 25 cycles. Coupling the pre-lithiated MCMB-F (Li@MCMB-F) anode with a commercial LiFePO₄ cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO₄//Li@MCMB-F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm⁻² for 110 times at a negligible capacity decay of 0.01% per cycle.     

Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries – A review

Lithium (Li) metal has been considered as the ultimate anode material for next-generation rechargeable batteries due to its ultra-high theoretical specific capacity (3860 mAh g⁻¹) and the lowest reduction voltage (−3.04 V vs the standard hydrogen electrode). However, the dendritic Li formation, uncontrolled interfacial reactions, and huge volume variations lead to unstable solid electrolyte interphase (SEI) layer, low Coulombic efficiency and hence short cycling lifetime. Designing artificial solid electrolyte interphase (artificial SEI) films on the Li metal electrode exhibits great potential to solve the aforementioned problems and enable Li–metal batteries with prolonged lifetime. Polymer materials with good ionic conductivity, superior processability and high flexibility are considered as ideal artificial SEI film materials. In this review, according to the ionic conductive groups, recent advances in polymeric artificial SEI films are summarized to afford a deep understanding of Li ion plating/stripping behavior and present design principles of high-performance artificial SEI films in achieving stable Li metal electrodes. Perspectives regarding to the future research directions of polymeric artificial SEI films for Li–metal electrode are also discussed. The insights and design principles of polymeric artificial SEI films gained in the current review will be definitely useful in achieving the Li–metal batteries with improved energy density, high safety and long cycling lifetime toward next-generation energy storage devices.     

In Situ Solid Electrolyte Interphase from Spray Quenching on Molten Li: A New Way to Construct High‐Performance Lithium‐Metal Anodes

Uncontrollable growth of Li dendrites and low utilization of active Li severely hinder its practical application. Construction of an artificial solid electrolyte interphase (SEI) on Li is demonstrated as one of the most effective ways to circumvent the above problems. Herein, a novel spray quenching method is developed in situ to fabricate an organic–inorganic composite SEI on Li metal. By spray quenching molten Li in a modified ether‐based solution, a homogeneous and dense SEI consisting of organic matrix embedded with inorganic LiF and Li₃N nanocrystallines (denoted as OIFN) is constructed on Li metal. Arising from high ionic conductivity and strong mechanical stability, the OIFN can not only effectively minimize the corrosion reaction of Li, but also greatly suppresses the dendrite growth. Accordingly, the OIFN‐Li anode presents prominent electrochemical performance with an enhanced Coulombic efficiency of 98.15% for 200 cycles and a small hysteresis of <450 mV even at ultrahigh current density up to 10 mA cm^?2. More importantly, during the full cell test with limited Li source, a high utilization of Li up to 40.5% is achieved for the OIFN‐Li anode. The work provides a brand‐new route to fabricate advanced SEI on alkali metal for high‐performance alkali‐metal batteries.     

Ultrathin Lithiophilic 3D Arrayed Skeleton Enabling Spatial-Selection Deposition for Dendrite-Free Lithium Anodes

Lithium metal batteries are promising to become a new generation of energy storage batteries. However, the growth of Li dendrites and the volume expansion of the anode are serious constraints to their commercial implementation. Herein, a controllable strategy is proposed to construct an ultrathin 3D hierarchical host of honeycomb copper micromesh loaded with lithiophilic copper oxide nanowires (CMMC). The uniquely designed 3D hierarchical arrayed skeletons demonstrate a surface-preferred and spatial-selective effect to homogenize local current density and relieve the volume expansion, effectively suppressing the dendrite growth. Employing the constructed CMMC current collector in a half-cell, >400 cycles with 99% coulombic efficiency at 0.5 mA cm⁻² is performed. The symmetric battery cycles stably for >2000 h, and the full battery delivers a capacity of 166.6 mAh g⁻¹. This facile and controllable approach provides an effective strategy for constructing high-performance lithium metal batteries.     

Functional Separator Enabled by Covalent Organic Frameworks for High-Performance Li Metal Batteries

Uncontrolled ion transport and susceptible SEI films are the key factors that induce lithium dendrite growth, which hinders the development of lithium metal batteries (LMBs). Herein, a TpPa-2SO₃H covalent organic framework (COF) nanosheet adhered cellulose nanofibers (CNF) on the polypropylene separator (COF@PP) is successfully designed as a battery separator to respond to the aforementioned issues. The COF@PP displays dual-functional characteristics with the aligned nanochannels and abundant functional groups of COFs, which can simultaneously modulate ion transport and SEI film components to build robust lithium metal anodes. The Li//COF@PP//Li symmetric cell exhibits stable cycling over 800 h with low ion diffusion activation energy and fast lithium ion transport kinetics, which effectively suppresses the dendrite growth and improves the stability of Li+ plating/stripping. Moreover, The LiFePO4//Li cells with COF@PP separator deliver a high discharge capacity of 109.6 mAh g⁻¹ even at a high current density of 3 C. And it exhibits excellent cycle stability and high capacity retention due to the robust LiF-rich SEI film induced by COFs. This COFs-based dual-functional separator promotes the practical application of lithium metal batteries.     

金属铋纳米颗粒原位修饰碳纳米管促进锂均匀沉积

锂金属具有高理论比容量和低电化学电位,是发展高能量密度电池最有吸引力的负极材料之一。然而,锂金属负极在反复的沉积/剥离过程中,不可避免地会出现不规则的锂枝晶生长,这将严重影响锂金属电池的循环寿命和使用安全性。本研究发展了一种简单温和的策略,在碳纳米管上原位修饰铋纳米颗粒,并涂覆在商业铜箔表面用作锂金属负极的集流体。研究表明,原位修饰的铋纳米颗粒可显著促进锂均匀沉积,抑制锂枝晶生长,从而提高锂金属电池的电化学性能。在电流密度为1 mA·cm^–2的条件下,基于Bi@CNT/Cu集流体的锂铜电池循环300圈后库仑效率可稳定在98%。基于Li@Bi@CNT/Cu负极的对称电池可稳定循环1000 h。基于Bi@CNT/Cu集流体的磷酸铁锂(LFP)全电池也获得了优异的电化学性能,在1C(170m A·g^–1)倍率下可稳定循环700圈。本研究为抑制锂金属负极枝晶生长提供了新的思路。     

A Novel Organic “Polyurea” Thin Film for Ultralong‐Life Lithium‐Metal Anodes via Molecular‐Layer Deposition

Metallic Li is considered as one of the most promising anode materials for next‐generation batteries due to its high theoretical capacity and low electrochemical potential. However, its commercialization has been impeded by the severe safety issues associated with Li‐dendrite growth. Non‐uniform Li‐ion flux on the Li‐metal surface and the formation of unstable solid electrolyte interphase (SEI) during the Li plating/stripping process lead to the growth of dendritic and mossy Li structures that deteriorate the cycling performance and can cause short‐circuits. Herein, an ultrathin polymer film of “polyurea” as an artificial SEI layer for Li‐metal anodes via molecular‐layer deposition (MLD) is reported. Abundant polar groups in polyurea can redistribute the Li‐ion flux and lead to a uniform plating/stripping process. As a result, the dendritic Li growth during cycling is efficiently suppressed and the life span is significantly prolonged (three times longer than bare Li at a current density of 3 mA cm^?2). Moreover, the detailed surface and interfacial chemistry of Li metal are studied comprehensively. This work provides deep insights into the design of artificial SEI coatings for Li metal and progress toward realizing next‐generation Li‐metal batteries.     

Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive

The Li–O₂ battery (LOB) is considered as a promising next‐generation energy storage device because of its high theoretic specific energy. To make a practical rechargeable LOB, it is necessary to ensure the stability of the Li anode in an oxygen atmosphere, which is extremely challenging. In this work, an effective Li‐anode protection strategy is reported by using boric acid (BA) as a solid electrolyte interface (SEI) forming additive. With the assistance of BA, a continuous and compact SEI film is formed on the Li‐metal surface in an oxygen atmosphere, which can significantly reduce unwanted side reactions and suppress the growth of Li dendrites. Such an SEI film mainly consists of nanocrystalline lithium borates connected with amorphous borates, carbonates, fluorides, and some organic compounds. It is ionically conductive and mechanically stronger than conventional SEI layer in common Li‐metal‐based batteries. With these benefits, the cycle life of LOB is elongated more than sixfold.     

Lithiophilic Cu‐CuO‐Ni Hybrid Structure: Advanced Current Collectors Toward Stable Lithium Metal Anodes

Metallic lithium (Li) is a promising anode material for next‐generation rechargeable batteries. However, the dendrite growth of Li and repeated formation of solid electrolyte interface during Li plating and stripping result in low Coulombic efficiency, internal short circuits, and capacity decay, hampering its practical application. In the development of stable Li metal anode, the current collector is recognized as a critical component to regulate Li plating. In this work, a lithiophilic Cu‐CuO‐Ni hybrid structure is synthesized as a current collector for Li metal anodes. The low overpotential of CuO for Li nucleation and the uniform Li⁺ ion flux induced by the formation of Cu nanowire arrays enable effective suppression of the growth of Li dendrites. Moreover, the surface Cu layer can act as a protective layer to enhance structural durability of the hybrid structure in long‐term running. As a result, the Cu‐CuO‐Ni hybrid structure achieves a Coulombic efficiency above 95% for more than 250 cycles at a current density of 1 mA cm^?2 and 580 h (290 cycles) stable repeated Li plating and stripping in a symmetric cell.     

构建亲锂铜基3D集流体实现金属锂的均匀沉积

锂金属负极以其最高的理论比容量(3860 mAh·g ^-1)和最低的电化学电位(-3.04 V (vs SHE))被誉为电池界的“圣杯”。但是锂金属电池的缺点也尤为明显: 充放电过程中锂金属电池容易在负极不均匀沉积从而产生锂枝晶, 锂枝晶的产生会造成固体电解质介面(SEI)膜的持续破裂, 不稳定的SEI膜又会加剧锂枝晶的形成, 进而刺穿隔膜, 导致电池的循环性能下降, 产生安全隐患, 所以采取相应的措施在负极均匀沉积金属锂尤为重要。本研究使用商业化的铜网, 通过碱性溶剂的氧化和空气气氛煅烧, 在铜网表面形成均一的亲锂氧化铜纳米片阵列。铜网的3D结构可以有效减小电流密度, 亲锂的纳米片阵列可以降低锂的沉积过电势, 均匀沉积锂, 有效抑制锂枝晶的产生。在电流密度为3 mA·cm ^-2的半电池测试中, 稳定循环230圈后库伦效率稳定维持在99%以上; 搭配磷酸铁锂(LFP)全电池测试, 在1C(0.17 mA·mg ^-1)条件下可稳定循环300圈, 容量保持率为95%。本研究为锂金属负极3D集流体的设计提供了新思路。     

Recent research progress of alloy-containing lithium anodes in lithium-metal batteries

Lithium metal is regarded as one of the most ideal anode materials for next-generation batteries, due to its high theoretical capacity of 3860 mAh g⁻¹ and low redox potential (−3.04 V vs standard hydrogen electrode). However, practical applications of lithium anodes are impeded by the uncontrollable growth of lithium dendrite and continuous reactions between lithium and electrolyte during cycling processes. According to reports for decades, artificial solid electrolyte interface (SEI), electrolyte additives, and construction of three-dimensional (3D) structures are demonstrated essential strategies. Among numerous approaches, metals that can alloy with lithium have been employed to homogenize lithium deposition and accelerate Li ion transportation, which attract more and more attention. This review aims to summarize the lithium alloying applied in lithium anodes including the fabricating approaches of alloy-containing lithium anodes, and the action mechanism and challenges of fabricated lithium anodes. Based on summarizing the literature, shortcomings and challenges as well as the prospects are also analyzed, to impel further research of lithium anodes and lithium-based batteries.     

Dendrite‐Free Lithium Deposition via a Superfilling Mechanism for High‐Performance Li‐Metal Batteries

Uncontrollable Li dendrite growth and low Coulombic efficiency severely hinder the application of lithium metal batteries. Although a lot of approaches have been developed to control Li deposition, most of them are based on inhibiting lithium deposition on protrusions, which can suppress Li dendrite growth at low current density, but is inefficient for practical battery applications, with high current density and large area capacity. Here, a novel leveling mechanism based on accelerating Li growth in concave fashion is proposed, which enables uniform and dendrite‐free Li plating by simply adding thiourea into the electrolyte. The small thiourea molecules can be absorbed on the Li metal surface and promote Li growth with a superfilling effect. With 0.02 m thiourea added in the electrolyte, Li | Li symmetrical cells can be cycled over 1000 cycles at 5.0 mA cm^?2, and a full cell with LiFePO₄ | Li configuration can even maintain 90% capacity after 650 cycles at 5.0 C. The superfilling effect is also verified by computational chemistry and numerical simulation, and can be expanded to a series of small chemicals using as electrolyte additives. It offers a new avenue to dendrite‐free lithium deposition and may also be expanded to other battery chemistries.     

Achieving Stable Lithium Metal Anode at 50 mA cm−2 Current Density by LiCl Enriched SEI

Lithium metal batteries are intensively studied due to the potential to bring up breakthroughs in high energy density devices. However, the inevitable growth of dendrites will cause the rapid failure of battery especially under high current density. Herein, the utilization of tetrachloroethylene (C₂Cl₄) is reported as the electrolyte additive to induce the formation of the LiCl-rich solid electrolyte interphase (SEI). Because of the lower Li ion diffusion barrier of LiCl, such SEI layer can supply sufficient pathway for rapid Li ion transport, alleviate the concentration polarization at the interface and inhibit the growth of Li dendrites. Meanwhile, the C₂Cl₄ can be continuously replenished during the cycle to ensure the stability of the SEI layer. With the aid of C₂Cl₄-based electrolyte, the Li metal electrodes can maintain stable for >300 h under high current density of 50 mA cm⁻² with areal capacity of 5 mAh cm⁻², broadening the compatibility of lithium metal anode toward practical application scenarios.     

A closed-host bi-layer dense/porous solid electrolyte interphase for enhanced lithium-metal anode stability

Thanks to its high specific capacity and low electrochemical potential, lithium metal is an ideal anode for next-generation high-energy batteries. However, the unstable heterogeneous surface of lithium gives rise to safety and efficiency concerns that prevent it from being utilized in practical applications. In this work, the formation of a closed-host bi-layer solid electrolyte interphase (SEI) improves the stability of lithium metal anode. This is successfully realized by forming an interconnected porous LiF-rich artificial SEI in contact with Li metal, and a dense, stable in-situ formed upper layer SEI. The porous layer increases the number of Li/LiF interfaces, which reduces local volume fluctuations and improves Li⁺ diffusion along these interfaces. Additionally, the tortuous porous structure guides uniform Li⁺ flux distribution and mechanically suppresses dendrite propagation. The dense upper layer of the SEI accomplishes a closed-host design, preventing continuous consumption of active materials. The duality of a dense top layer with porous bottom layer led to extended cycle life and improved rate performance, evidenced with symmetric cell testing, as well as full cell testing paired with sulfur and LiFePO₄ (LFP) cathodes. This work is a good example of a rational design of the SEI, based on comprehensive consideration of various critical factors to improve Li-metal anode stability, and highlights a new pathway to improve cycling and rate performances of Li metal batteries.     

Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid

High‐energy lithium‐metal batteries are among the most promising candidates for next‐generation energy storage systems. With a high specific capacity and a low reduction potential, the Li‐metal anode has attracted extensive interest for decades. Dendritic Li formation, uncontrolled interfacial reactions, and huge volume effect are major hurdles to the commercial application of Li‐metal anodes. Recent studies have shown that the performance and safety of Li‐metal anodes can be significantly improved via organic electrolyte modification, Li‐metal interface protection, Li‐electrode framework design, separator coating, and so on. Superior to the liquid electrolytes, solid‐state electrolytes are considered able to inhibit problematic Li dendrites and build safe solid Li‐metal batteries. Inspired by the bright prospects of solid Li‐metal batteries, increasing efforts have been devoted to overcoming the obstacles of solid Li‐metal batteries, such as low ionic conductivity of the electrolyte and Li–electrolyte interfacial problems. Here, the approaches to protect Li‐metal anodes from liquid batteries to solid‐state batteries are outlined and analyzed in detail. Perspectives regarding the strategies for developing Li‐metal anodes are discussed to facilitate the practical application of Li‐metal batteries.     

Redistributing Li-Ion Flux by Parallelly Aligned Holey Nanosheets for Dendrite-Free Li Metal Anodes

Li metal is the most ideal anode material to assemble rechargeable batteries with high energy density. However, nonuniform Li-ion flux during repeated Li plating and stripping leads to continuous Li dendrite growth and dead Li formation, which causes safety risks and short lifetime and thus impedes the commercialization of Li metal batteries. Here, parallelly aligned holey nanosheets on a Li metal anode are reported to simultaneously redistribute the Li-ion flux in the electrolyte and in the solid-electrolyte interphase, which allows uniform Li-ion distribution as well as fast Li-ion diffusion for reversible Li plating and stripping. With holey MgO nanosheets as an example, the protected Li anodes achieve Coulombic efficiency of ≈99% and ultralong-term reversible Li plating/stripping over 2500 h at a high current density of 10 mA cm⁻². A full-cell battery, using the protected anode, a 4 V Li-ion cathode, and a commercial carbonate electrolyte, shows capacity retention of 90.9% after 500 cycles.     

A Stable Solid Electrolyte Interphase for Magnesium Metal Anode Evolved from a Bulky Anion Lithium Salt

Rechargeable magnesium (Mg) metal batteries are a promising candidate for “post-Li-ion batteries” due to their high capacity, high abundance, and most importantly, highly reversible and dendrite-free Mg metal anode. However, the formation of passivating surface film rather than Mg²⁺-conducting solid electrolyte interphase (SEI) on Mg anode surface has always restricted the development of rechargeable Mg batteries. A stable SEI is constructed on the surface of Mg metal anode by the partial decomposition of a pristine Li electrolyte in the electrochemical process. This Li electrolyte is easily prepared by dissolving lithium tetrakis(hexafluoroisopropyloxy)borate (Li[B(hfip)₄]) in dimethoxyethane. It is noteworthy that Mg²⁺ can be directly introduced into this Li electrolyte during the initial electrochemical cycles for in situ forming a hybrid Mg²⁺/Li⁺ electrolyte, and then the cycled electrolyte can conduct Mg-ion smoothly. The existence of this as-formed SEI blocks the further parasitic reaction of Mg metal anode with electrolyte and enables this electrolyte enduring long-term electrochemical cycles stably. This approach of constructing superior SEI on Mg anode surface and exploiting novel Mg electrolyte provides a new avenue for practical application of high-performance rechargeable Mg batteries.     

Regulating Lithium Nucleation via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Li metal is demonstrated as one of the most promising anode materials for high energy density batteries. However, uncontrollable Li dendrite growth and repeated growth of solid electrolyte interface during the charge/discharge process lead to safety issues and capacity decay, preventing its practical application. To address these issues, an effective strategy is to realize uniform Li nucleation. Here, a stable lithium–scaffold composite electrode (CC/CNT@Li) is designed by melting of lithium metal into 3D interconnected lithiophilic carbon nanotube (CNT) on a porous carbon cloth (CC). The 3D interconnected CNTs successfully change the lithiophobic CC into lithiophilic nature, reducing the polarization of the electrode, ensuring homogenous Li nucleation and continuous smooth Li plating. The CNTs on the surface of CC provide adequate Li nucleation sites and reduce the areal current density to avoid Li dendrite growth. The 3D porous structure of CC/CNT offers enough free room for buffering the huge volume change during Li plating/stripping. The CC/CNT@Li composite anode exhibits dendrite‐free morphology and superior cycling performances over 500 h with low voltage hysteresis of 18, 23, and 71 mV at the current density of 1, 2, and 5 mA cm^?2, respectively.