A Highly Emissive Surface Layer in Mixed‐Halide Multication Perovskites

Mixed‐halide lead perovskites have attracted significant attention in the field of photovoltaics and other optoelectronic applications due to their promising bandgap tunability and device performance. Here, the changes in photoluminescence and photoconductance of solution‐processed triple‐cation mixed‐halide (Cs_0.06MA_0.15FA_0.79)Pb(Br_0.4I_0.6)₃ perovskite films (MA: methylammonium, FA: formamidinium) are studied under solar‐equivalent illumination. It is found that the illumination leads to localized surface sites of iodide‐rich perovskite intermixed with passivating PbI₂ material. Time‐ and spectrally resolved photoluminescence measurements reveal that photoexcited charges efficiently transfer to the passivated iodide‐rich perovskite surface layer, leading to high local carrier densities on these sites. The carriers on this surface layer therefore recombine with a high radiative efficiency, with the photoluminescence quantum efficiency of the film under solar excitation densities increasing from 3% to over 45%. At higher excitation densities, nonradiative Auger recombination starts to dominate due to the extremely high concentration of charges on the surface layer. This work reveals new insight into phase segregation of mixed‐halide mixed‐cation perovskites, as well as routes to highly luminescent films by controlling charge density and transfer in novel device structures.     

Boosting Perovskite Photodetector Performance in NIR Using Plasmonic Bowtie Nanoantenna Arrays

Triple‐cation mixed metal halide perovskites are important optoelectronic materials due to their high photon to electron conversion efficiency, low exciton binding energy, and good thermal stability. However, the perovskites have low photon to electron conversion efficiency in near‐infrared (NIR) due to their weak intrinsic absorption at longer wavelength, especially near the band edge and over the bandgap wavelength. A plasmonic functionalized perovskite photodetector (PD) is designed and fabricated in this study, in which the perovskite ((Cs_0.06FA_0.79MA_0.15)Pb(I_0.85Br_0.15)₃) active materials are spin‐coated on the surface of Au bowtie nanoantenna (BNA) arrays substrate. Under 785 nm laser illumination, near the bandedge of perovskite, the fabricated BNA‐based plasmonic PD exhibits ≈2962% enhancement in the photoresponse over the Si/SiO₂‐based normal PD. Moreover, the detectivity of the plasmonic PD has a value of 1.5 × 10¹² with external quantum efficiency as high as 188.8%, more than 30 times over the normal PD. The strong boosting in the plasmonic PD performance is attributed to the enhanced electric field around BNA arrays through the coupling of localized surface plasmon resonance. The demonstrated BNA‐perovskite design can also be used to enhance performance of other optoelectronic devices, and the concept can be extended to other spectral regions with different active materials.     

Manipulating the Mixed‐Perovskite Crystallization Pathway Unveiled by In Situ GIWAXS

Mixed perovskites have achieved substantial successes in boosting solar cell efficiency, but the complicated perovskite crystal formation pathway remains mysterious. Here, the detailed crystallization process of mixed perovskites (FA_0.83MA_0.17Pb(I_0.83Br_0.17)₃) during spin‐coating is revealed by in situ grazing‐incidence wide‐angle X‐ray scattering measurements, and three phase‐formation stages are identified: I) precursor solution; II) hexagonal δ‐phase (2H); and III) complex phases including hexagonal polytypes (4H, 6H), MAI–PbI₂–DMSO intermediate phases, and perovskite α‐phase. The correlated device performance and ex situ characterizations suggest the existence of an “annealing window” covering the duration of stage II. The spin‐coated film should be annealed within the annealing window to avoid the formation of hexagonal polytypes during the perovskite crystallization process, thus achieving a good device performance. Remarkably, the crystallization pathway can be manipulated by incorporating Cs⁺ ions in mixed perovskites. Combined with density functional theory calculations, the perovskite system with sufficient Cs⁺ will bypass the formation of secondary phases in stage III by promoting the formation of α‐phase both kinetically and thermodynamically, thereby significantly extending the annealing window. This study provides underlying reasons of the time sensitivity of fabricating mixed‐perovskite devices and insightful guidelines for manipulating the perovskite crystallization pathways toward higher performance.     

Low‐Dimensional Perovskites with Diammonium and Monoammonium Alternant Cations for High‐Performance Photovoltaics

Low‐dimensional Ruddlesden–Popper (LDRP) perovskites are a current theme in solar energy research as researchers attempt to fabricate stable photovoltaic devices from them. However, poor exciton dissociation and insufficiently fast charge transfer slows the charge extraction in these devices, resulting in inferior performance. 1,4‐Butanediamine (BEA)‐based low‐dimensional perovskites are designed to improve the carrier extraction efficiency in such devices. Structural characterization using single‐crystal X‐ray diffraction reveals that these layered perovskites are formed by the alternating ordering of diammonium (BEA²⁺) and monoammonium (MA⁺) cations in the interlayer space (B‐ACI) with the formula (BEA)_0.5MA_n PbnI_3n+1. Compared to the typical LDRP counterparts, these B‐ACI perovskites deliver a wider light absorption window and lower exciton binding energies with a more stable layered perovskite structure. Additionally, ultrafast transient absorption indicates that B‐ACI perovskites exhibit a narrow distribution of quantum well widths, leading to a barrier‐free and balanced carrier transport pathway with enhanced carrier diffusion (electron and hole) length over 350 nm. A perovskite solar cell incorporating BEA ligands achieves record efficiencies of 14.86% for (BEA)_0.5MA₃Pb₃I₁₀ and 17.39% for (BEA)_0.5Cs_0.15(FA_0.83MA_0.17)_2.85Pb₃(I_0.83Br_0.17)₁₀ without hysteresis. Furthermore, the triple cations B‐ACI devices can retain over 90% of their initial power conversion efficiency when stored under ambient atmospheric conditions for 2400 h and show no significant degradation under constant illumination for over 500 h.     

Nanoscale Insights into Photovoltaic Hysteresis in Triple‐Cation Mixed‐Halide Perovskite: Resolving the Role of Polarization and Ionic Migration

Triple‐cation mixed‐halide perovskites of composition Cs_x(FA_yMA_1?y)_1?xPb(I_zBr_1?z)₃ (CsFAMA) have been reported to possess excellent photovoltaic efficiency with minimal hysteresis; in this work, nanoscale insight is shed into the roles of illumination‐induced polarization and ionic migration in photovoltaic hysteresis. By examining the concurrent evolution of ionic distribution and spontaneous polarization of CsFAMA under light illumination using dynamic‐strain‐based scanning probe microscopy, strong linear piezoelectricity arising from photoenhanced polarization is observed, while ionic migration is found to be not significantly increased by lightening. Nanoscale photocurrents are mapped under a series of biases using conductive atomic force microscopy, revealing negligible difference between forward and backward scans, and local IV curves reconstructed from principal component analysis show minimal hysteresis of just 1%. These observations at the nanoscale are confirmed in a macroscopic perovskite solar cell made of CsFAMA, exhibiting a high efficiency of 20.11% and with hysteresis index as small as 3%. Ionic migration, polarization, and photocurrent hysteresis are thus directly correlated at the nanoscale, and photoenhanced polarization in triple‐cation mixed‐halide perovskites is established, which does not contribute to the photovoltaic hysteresis.     

Designing Efficient Energy Funneling Kinetics in Ruddlesden–Popper Perovskites for High‐Performance Light‐Emitting Diodes

Mixed Ruddlesden–Popper (RP) perovskites are of great interest in light‐emitting diodes (LEDs), due to the efficient energy transfer (funneling) from high‐bandgap (donor) domains to low‐bandgap (acceptor) domains, which leads to enhanced photoluminescence (PL) intensity, long PL lifetime, and high‐efficiency LEDs. However, the influence of reduced effective emitter centers in the active emissive film, as well as the implications of electrical injection into the larger bandgap donor material, have not been addressed in the context of an active device. The electrical and optical signatures of the energy cascading mechanisms are critically assessed and modulated in a model RP perovskite series ((C₈H₁₇NH₃)₂(CH(NH₂)₂)_m?1Pb_mBr_3m+1). Optimized devices demonstrate a current efficiency of 22.9 cd A^?1 and 5% external quantum efficiency, more than five times higher than systems where funneling is absent. The signature of nonideal funneling in RP perovskites is revealed by the appearance of donor electroluminescence from the device, followed by a reduction in the LED performance     

Doping and Switchable Photovoltaic Effect in Lead‐Free Perovskites Enabled by Metal Cation Transmutation

Creating defect tolerant lead‐free halide perovskites is the major challenge for development of high‐performance photovoltaics with nontoxic absorbers. Few compounds of Sn, Sb, or Bi possess ns² electronic configuration similar to lead, but their poor photovoltaic performances inspire us to evaluate other factors influencing defect tolerance properties. The effect of heavy metal cation (Bi) transmutation and ionic migration on the defects and carrier properties in a 2D layered perovskite (NH₄)₃(Sb_(1?x)Bi_x)₂I₉ system is investigated. It is shown, for the first time, the possibility of engineering the carriers in halide perovskites via metal cation transmutation to successfully form intrinsic p‐ and n‐type materials. It is also shown that this material possesses a direct–indirect bandgap enabling high absorption coefficient, extended carrier lifetimes >100 ns, and low trap densities similar to lead halide perovskites. This study also demonstrates the possibility of electrical poling to induce switchable photovoltaic effect without additional electron and hole transport layers.     

Real‐Time Observation of Iodide Ion Migration in Methylammonium Lead Halide Perovskites

Organic–inorganic metal halide perovskites (e.g., CH₃NH₃PbI_3?x Cl_x ) emerge as a promising optoelectronic material. However, the Shockley–Queisser limit for the power conversion efficiency (PCE) of perovskite‐based photovoltaic devices is still not reached. Nonradiative recombination pathways may play a significant role and appear as photoluminescence (PL) inactive (or dark) areas on perovskite films. Although these observations are related to the presence of ions/defects, the underlying fundamental physics and detailed microscopic processes, concerning trap/defect status, ion migration, etc., still remain poorly understood. Here correlated wide‐field PL microscopy and impedance spectroscopy are utilized on perovskite films to in situ investigate both the spatial and the temporal evolution of these PL inactive areas under external electric fields. The formation of PL inactive domains is attributed to the migration and accumulation of iodide ions under external fields. Hence, we are able to characterize the kinetic processes and determine the drift velocities of these ions. In addition, it is shown that I₂ vapor directly affects the PL quenching of a perovskite film, which provides evidence that the migration/segregation of iodide ions plays an important role in the PL quenching and consequently limits the PCE of organometal halide‐based perovskite photovoltaic devices.     

Kinetic Stabilization of the Sol–Gel State in Perovskites Enables Facile Processing of High‐Efficiency Solar Cells

Perovskite solar cells increasingly feature mixed‐halide mixed‐cation compounds (FA_1?x?yMA_xCs_yPbI_3?zBr_z) as photovoltaic absorbers, as they enable easier processing and improved stability. Here, the underlying reasons for ease of processing are revealed. It is found that halide and cation engineering leads to a systematic widening of the anti‐solvent processing window for the fabrication of high‐quality films and efficient solar cells. This window widens from seconds, in the case of single cation/halide systems (e.g., MAPbI₃, FAPbI₃, and FAPbBr₃), to several minutes for mixed systems. In situ X‐ray diffraction studies reveal that the processing window is closely related to the crystallization of the disordered sol–gel and to the number of crystalline byproducts; the processing window therefore depends directly on the precise cation/halide composition. Moreover, anti‐solvent dripping is shown to promote the desired perovskite phase with careful formulation. The processing window of perovskite solar cells, as defined by the latest time the anti‐solvent drip yields efficient solar cells, broadened with the increasing complexity of cation/halide content. This behavior is ascribed to kinetic stabilization of sol–gel state through cation/halide engineering. This provides guidelines for designing new formulations, aimed at formation of the perovskite phase, ultimately resulting in high‐efficiency perovskite solar cells produced with ease and with high reproducibility.     

Efficient Perovskite Solar Cells Fabricated Through CsCl‐Enhanced PbI2 Precursor via Sequential Deposition

The fabrication of high‐quality perovskite film highly relies on chemical composition and the synthesis method of perovskite. So far, sequentially deposited MA_0.03FA_0.97Pb(I_0.97Br_0.03)₃ polycrystalline film is adopted to produce high‐performance perovskite solar cells with record power conversion efficiency (PCE). Fewer grain boundaries and incorporation of inorganic cation (e.g., cesium) would further increase device performance via sequential deposition. Here, cesium chloride (CsCl) is introduced into lead iodide (PbI₂) precursor solution that beneficially modulates the property of PbI₂ film, leading to larger grains with cesium incorporation in the resulting perovskite film. The enlarged crystal grains originate from a slower nucleation process for CsCl‐containing PbI₂ film when reacting with formamidine iodide, confirmed by in situ confocal photoluminescence imaging. Photovoltaic devices based on CsCl‐containing PbI₂ film demonstrate a higher averaging efficiency of 21.3% than 20.3% of the devices without CsCl additives for reverse scan. More importantly, the device stability is improved by CsCl additives that retain over 90% of their initial PCE value after 4000 min tracking at maximum power point under 1‐sun illumination. This work paves a way to further improve the photovoltaic performance of mixed‐cation‐halide perovskite solar cells via a sequential deposition method.     

Hybrid Perovskite Light‐Emitting Diodes Based on Perovskite Nanocrystals with Organic–Inorganic Mixed Cations

Organic–inorganic hybrid perovskite materials with mixed cations have demonstrated tremendous advances in photovoltaics recently, by showing a significant enhancement of power conversion efficiency and improved perovskite stability. Inspired by this development, this study presents the facile synthesis of mixed‐cation perovskite nanocrystals based on FA_{(1?x )}Cs_x PbBr₃ (FA = CH(NH₂)₂). By detailed characterization of their morphological, optical, and physicochemical properties, it is found that the emission property of the perovskite, FA_{(1?x )}Cs_x PbBr₃, is significantly dependent on the substitution content of the Cs cations in the perovskite composition. These mixed‐cation perovskites are employed as light emitters in light‐emitting diodes (LEDs). With an optimized composition of FA_0.8Cs_0.2PbBr₃, the LEDs exhibit encouraging performance with a highest reported luminance of 55 005 cd m^?2 and a current efficiency of 10.09 cd A^?1. This work provides important instructions on the future compositional optimization of mixed‐cation perovskite for obtaining high‐performance LEDs. The authors believe this work is a new milestone in the development of bright and efficient perovskite LEDs.     

High Performance and Stable All‐Inorganic Metal Halide Perovskite‐Based Photodetectors for Optical Communication Applications

Photodetectors are critical parts of an optical communication system for achieving efficient photoelectronic conversion of signals, and the response speed directly determines the bandwidth of the whole system. Metal halide perovskites, an emerging class of low‐cost solution‐processed semiconductors, exhibiting strong optical absorption, low trap states, and high carrier mobility, are widely investigated in photodetection applications. Herein, through optimizing the device engineering and film quality, high‐performance photodetectors based on all‐inorganic cesium lead halide perovskite (CsPbI_xBr_3–x), which simultaneously possess high sensitivity and fast response, are demonstrated. The optimized devices processed from CsPbIBr₂ perovskite show a practically measured detectable limit of about 21.5 pW cm^?2 and a fast response time of 20 ns, which are both among the highest reported device performance of perovskite‐based photodetectors. Moreover, the photodetectors exhibit outstanding long‐term environmental stability, with negligible degradation of the photoresponse property after 2000 h under ambient conditions. In addition, the resulting perovskite photodetector is successfully integrated into an optical communication system and its applications as an optical signal receiver on transmitting text and audio signals is demonstrated. The results suggest that all‐inorganic metal halide perovskite‐based photodetectors have great application potential for optical communication.     

A Strategy toward New Low‐Dimensional Hybrid Halide Perovskites with Anionic Spacers

The low‐dimensional halide perovskites have received enormous attention due to their unique photovoltaic and optoelectronic performances. Periodic spacers are used to inhibit the growth of 3D perovskite and fabricate a 2D counterpart with layered structure, mostly based on organic/inorganic cations. Herein, by introducing organic anions (e.g., pentanedioic acid (PDA) and hexanedioic acid (HDA) simultaneously), leaf‐shaped (Cs₃Pb₂Br₅)₂(PDA–HDA) microplates with low‐dimensional structure are synthesized. They also exhibit significant photoluminescence (PL) centered at 540 nm with a narrow emission peak. The synthesis of single crystals of Pb(PDA) and Pb(HDA) allows to further clarify the crystal structure of (Cs₃Pb₂Br₅)₂(PDA–HDA) perovskite and its structural evolution mechanism. Moreover, the cooperative introduction of dicarboxylic acid pairs with appropriate lengths is thermodynamically favored for the low‐dimensional perovskite crystallization. The temperature‐dependent PL indicates a V‐shaped Stokes shift with elevated temperature that could be associated with the localization of excitons in the inorganic layers between organic dicarboxylic acid molecules. This work demonstrates low‐dimensional halide perovskite with anionic spacers, which also opens up a new approach to the growth of low‐dimensional organic–inorganic hybrid perovskite crystals.     

Highly Efficient 2D/3D Hybrid Perovskite Solar Cells via Low‐Pressure Vapor‐Assisted Solution Process

The fabrication of multidimensional organometallic halide perovskite via a low‐pressure vapor‐assisted solution process is demonstrated for the first time. Phenyl ethyl‐ammonium iodide (PEAI)‐doped lead iodide (PbI₂) is first spin‐coated onto the substrate and subsequently reacts with methyl‐ammonium iodide (MAI) vapor in a low‐pressure heating oven. The doping ratio of PEAI in MAI‐vapor‐treated perovskite has significant impact on the crystalline structure, surface morphology, grain size, UV–vis absorption and photoluminescence spectra, and the resultant device performance. Multiple photoluminescence spectra are observed in the perovskite film starting with high PEAI/PbI₂ ratio, which suggests the coexistence of low‐dimensional perovskite (PEA₂MA_n?1Pb_nI_3n+1) with various values of n after vapor reaction. The dimensionality of the as‐fabricated perovskite film reveals an evolution from 2D, hybrid 2D/3D to 3D structure when the doping level of PEAI/PbI₂ ratio varies from 2 to 0. Scanning electron microscopy images and Kelvin probe force microscopy mapping show that the PEAI‐containing perovskite grain is presumably formed around the MAPbI₃ perovskite grain to benefit MAPbI₃ grain growth. The device employing perovskite with PEAI/PbI₂ = 0.05 achieves a champion power conversion efficiency of 19.10% with an open‐circuit voltage of 1.08 V, a current density of 21.91 mA cm^?2, and a remarkable fill factor of 80.36%.     

Suppressing Excess Lead Iodide Aggregation and Reducing N-Type Doping at Perovskite/HTL Interface for Efficient Perovskite Solar Cells

Excess lead iodide (PbI₂) aggregation at the charge carrier transport interface leads to energy loss and acts as unstable origins in perovskite solar cells (PSCs). Here, a strategy is reported to modulate the interfacial excess PbI₂ by introducing π-conjugated small-molecule semiconductors 4,4'-cyclohexylbis[N,N-bis(4-methylphenyl)aniline] (TAPC) into perovskite films through an antisolvent addition method. The coordination of TAPC to Pb I units through the electron-donating triphenylamine groups and π-Pb²⁺ interactions allows for a compact perovskite film with reduced excess PbI₂ aggregates. Besides, preferred energy level alignment is achieved due to the suppressed n-type doping effect at the hole transport layer (HTL) interfaces. As a result, the TAPC-modified PSC based on Cs_0.05(FA_0.85MA_0.15)_0.95Pb(I_0.85Br_0.15)₃ triple-cation perovskite achieved an improved PCE from 18.37% to 20.68% and retained ≈90% of the initial efficiency after 30 days of aging under ambient conditions. Moreover, the TAPC-modified device based on FA_0.95MA_0.05PbI_2.85Br_0.15 perovskite produced an improved efficiency of 23.15% compared to the control (21.19%). These results provide an effective strategy for improving the performance of PbI₂-rich PSCs.     

2D Perovskites with Giant Excitonic Optical Nonlinearities for High‐Performance Sub‐Bandgap Photodetection

Two‐dimensional (2D) perovskites have proved to be promising semiconductors for photovoltaics, photonics, and optoelectronics. Here, a strategy is presented toward the realization of highly efficient, sub‐bandgap photodetection by employing excitonic effects in 2D Ruddlesden–Popper‐type halide perovskites (RPPs). On near resonance with 2D excitons, layered RPPs exhibit degenerate two‐photon absorption (D‐2PA) coefficients as giant as 0.2–0.64 cm MW^?1. 2D RPP‐based sub‐bandgap photodetectors show excellent detection performance in the near‐infrared (NIR): a two‐photon‐generated current responsivity up to 1.2 × 10⁴ cm² W^?2 s^?1, two orders of magnitude greater than InAsSbP‐pin photodiodes; and a dark current as low as 2 pA at room temperature. More intriguingly, layered‐RPP detectors are highly sensitive to the light polarization of incoming photons, showing a considerable anisotropy in their D‐2PA coefficients (β_[001]/β_[011] = 2.4, 70% larger than the ratios reported for zinc‐blende semiconductors). By controlling the thickness of the inorganic quantum well, it is found that layered RPPs of (C₄H₉NH₃)₂(CH₃NH₃)Pb₂I₇ can be utilized for three‐photon photodetection in the NIR region.     

Abnormal Synergetic Effect of Organic and Halide Ions on the Stability and Optoelectronic Properties of a Mixed Perovskite via In Situ Characterizations

The mixed cation lead mixed halide perovskite (MLMP) Cs_xFA_1‐xPbI_yBr_3‐y is one of the most promising candidates for both single‐junction and tandem solar cells due to its high efficiency and remarkable stability. However, the composition effect on thermal stability and photovoltaic performances has not yet been comprehensively investigated. Therefore, the interplay between composition, crystal structure, morphology, and optoelectronic properties under heat stress, is systematically elucidated here through a series of in situ characterizations. It is revealed for the first time that the FA⁺ and Br^? release synchronously at first even under mild annealing. This leads to a serious FA‐ and Br‐deficiency issue, with only 88.3% of Br and 90.2% of FA retained after annealing at 100 °C, which significantly magnifies the hysteresis, phase segregation, and instability issues. Finally, a trace amount of FA⁺ and Br^? is introduced onto the post‐annealed MLMP surface to compensate for the deficiency through vacancy filling. The degradation lifetime to 80% of the initial efficiency (t₈₀) is improved from 504 to 1056 h and the hysteresis issue is also well resolved. This work highlights the importance of the synergetic composition effect of the organic cation and halide anion on stability and efficiency optimization for long‐term applications.     

From Nonluminescent to Blue‐Emitting Cs4PbBr6 Nanocrystals: Tailoring the Insulator Bandgap of 0D Perovskite through Sn Cation Doping

All‐inorganic cesium lead halide perovskite nanocrystals (NCs) with different dimensionalities have recently fascinated the research community due to their extraordinary optoelectronic performance such as tunable bandgaps over the entire visible spectral region. However, compared to well‐developed 3D CsPbX₃ perovskites (X = Cl, Br, and I), the bandgap tuning in 0D Cs₄PbX₆ perovskite NCs remains an arduous task. Herein, a simple but valid strategy is proposed to tailor the insulator bandgap (≈3.96 eV) of Cs₄PbBr₆ NCs to the blue spectral region by changing the local coordination environment of isolated [PbBr₆]^4? octahedra in the Cs₄PbBr₆ crystal through Sn cation doping. Benefitting from the unique Pb²⁺‐poor and Br^?‐rich reaction environment, the Sn cation is successfully introduced into the Cs₄PbBr₆ NCs, forming coexisting point defects comprising substitutional Sn_Pb and interstitial Br_i, thereby endowing these theoretically nonluminescent Cs₄PbBr₆ NCs with an ultranarrow blue emission at ≈437 nm (full width at half maximum, ≈12 nm). By combining the experimental results with first‐principles calculations, an unusual electronic dual‐bandgap structure, comprising the newly emerged semiconducting bandgap of ≈2.87 eV and original insulator bandgap of ≈3.96 eV, is found to be the underlying fundamental reason for the ultranarrow blue emission.     

Stable Light‐Emitting Diodes Using Phase‐Pure Ruddlesden–Popper Layered Perovskites

State‐of‐the‐art light‐emitting diodes (LEDs) are made from high‐purity alloys of III–V semiconductors, but high fabrication cost has limited their widespread use for large area solid‐state lighting. Here, efficient and stable LEDs processed from solution with tunable color enabled by using phase‐pure 2D Ruddlesden–Popper (RP) halide perovskites with a formula (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)_n?1Pb_nI_3n+1 are reported. By using vertically oriented thin films that facilitate efficient charge injection and transport, efficient electroluminescence with a radiance of 35 W Sr^?1 cm^?2 at 744 nm with an ultralow turn‐on voltage of 1 V is obtained. Finally, operational stability tests suggest that phase purity is strongly correlated to stability. Phase‐pure 2D perovskites exhibit >14 h of stable operation at peak operating conditions with no droop at current densities of several Amperes cm^?2 in comparison to mixtures of 2D/3D or 3D perovskites, which degrade within minutes.     

Symmetrization of the Crystal Lattice of MAPbI3 Boosts the Performance and Stability of Metal–Perovskite Photodiodes

Semiconducting lead triiodide perovskites (A PbI₃) have shown remarkable performance in applications including photovoltaics and electroluminescence. Despite many theoretical possibilities for A ⁺ in A PbI₃, the current experimental knowledge is largely limited to two of these materials: methylammonium (MA⁺) and formamidinium (FA⁺) lead triiodides, neither of which adopts the ideal, cubic perovskite structure at room temperature. Here, a volume‐based criterion is proposed for cubic A PbI₃ to be stable, and two perovskite materials MA_1?x EA_x PbI₃ (MEPI, EA⁺ = ethylammonium) and MA_1?y DMA_y PbI₃ (MDPI, DMA⁺ = dimethylammonium) are introduced. Powder and single‐crystal X‐ray diffraction (XRD) results reveal that MEPI and MDPI are solid solutions possessing the cubic perovskite structure, and the EA⁺ and DMA⁺ cations play similar roles in the symmetrization of the crystal lattice of MAPbI₃. Single crystals of MEPI and MDPI are grown and made into plates of a range of thicknesses, and then into metal–perovskite photodiodes. These devices exhibit tripled diffusion lengths and about tenfold enhancement in stability against moisture, both relative to the current benchmark MAPbI₃. In this study, the systematic approach to materials design and device fabrication greatly expands the candidate pool of perovskite semiconductors, and paves the way for high‐performance, single‐crystal perovskite devices including solar cells and light emitters.