冷冻保护剂葡聚糖-聚赖氨酸对冷冻皇冠梨品质的影响

为了解冷冻保护剂葡聚糖、聚赖氨酸对冷冻皇冠梨品质的影响,以氯化钙、氯化钙-葡聚糖、氯化钙-聚赖氨酸、氯化钙-葡聚糖-聚赖氨酸为冷冻浸渍液对皇冠梨进行冷冻处理.用无纸化温度记录仪测定冻结时间,分析样品冻结过程中温度随时间的变化,并对冻融后样品进行汁液损失、质构、水分分布等指标测定.结果表明:氯化钙、氯化钙-葡聚糖、氯化钙...     

Optimised methodology for the extraction of protein from quinoa (Chenopodium quinoa Willd.)

Quinoa is a highly appreciated Andean pseudo‐cereal and has sparked attention worldwide due to its excellent nutritional value. The protein extraction parameters for defatted quinoa seed meal (DQSM) were optimised in this study. Initially, a Plackett–Burman design was applied to screen the factors displaying a potential effect on the quinoa protein extraction yield (Y %, g soluble protein/100 g total protein) being the main evaluated factors: pH, NaCl concentration, time, temperature, solvent type, particle size and solvent/meal ratio. Four main factors: temperature, solvent/meal ratio, pH and time selected from the screening step were optimised with a central composed design (CCD). The obtained response surface model (RSM) produced a satisfactory fitting of the results (R² = 0.9308). Optimal quinoa protein extraction conditions of 36.2 °C, solvent/meal ratio of 19.6/1 (v/w) and 90 min resulted in a protein yield of 62.1% (9.06 g of protein/100 g DQSM) which closely agree with the predicted value of 62.5%.The model was experimentally validated by extracting the quinoa protein using the optimal conditions revealed by RSM. The optimised conditions could be successfully employed in the design process of protein extraction from quinoa seed meal to obtain optimal yields.     

Production and stability of water‐dispersible astaxanthin oleoresin from Phaffia rhodozyma

The process of extracting the astaxanthin oleoresin from pretreated Phaffia rhodozyma cells was optimised using a Box‐Behnken response surface design. Microwaving the cells at 105 W for 1 min followed by ethyl acetate extraction was the best pretreatment, and the optimal extraction conditions were 65 °C for 24 min using a solvent–solid ratio of 19:1. The order of the ability to disperse the astaxanthin oleoresin was propylene glycol> Tween 80 > Tween 20 > α‐cyclodextrin, β‐cyclodextrin. It was determined that the degradation of the colour of the water‐dispersible oleoresin followed a first‐order kinetics model. The greatest stability was observed at pH 4 and at the lowest temperature evaluated (40 °C). The thermal degradation of the pigment occurs in two steps, the first one from 0 to 1.5 h, with an E_aI = 10.31 kJ mol^?1, and the second one from 1.5 to 5 h, with an E_aII = 30.06 kJ mol^?1     

Selective fractionation of cholesterol from whole milk powder: optimisation of supercritical process conditions

Supercritical fluid extraction (SCFE) of cholesterol from whole milk powder (WMP) was investigated in this study. The combined effects of temperature (40–80 °C) and pressure (150–250 bar) on the efficacy of cholesterol extraction (mg 100 g^?1), modifications in the fat content (FC) (%) and solubility index (SI) (%) of WMP were studied and optimised by the application of response surface methodology (RSM). Variations in the free fatty acids (FFAs) (mg oleic acid per 100 g of milk fat) and lightness value (L*) were also investigated after SCFE process. About 55.8% reduction in cholesterol was achieved at the optimised condition of 68 °C, 207 bar with 40 min static time and 2 h dynamic time at flow rate of 6 L min^?1. Extraction at the optimised conditions maximised the yield of cholesterol while retaining the FC, SI, FFA and L* at moderate limits of 23.7%, 85.1%, 7.7 mg per 100 g milk fat and 95.4, respectively.     

Quality changes of pork during frozen storage: comparison of immersion solution freezing and air blast freezing

This study evaluated the effects of freezing method and storage time on the quality changes of pork longissimus thoracis (LT). The results showed that, compared to air blast freezing (AF), better microstructure was observed in pork under immersion solution freezing (ISF) mainly due to higher freezing rate. ISF group had significantly lower thawing loss at 1, 31 and 91 days and higher shear force at 1 day than AF (P < 0.05). A significant reduction in TBARS value at 61 and 91 days was observed in ISF samples (P < 0.05). No significant differences were observed between the two treatments in the colour, cooking loss and sulfhydryl groups (P > 0.05). All quality indicators were significantly affected by storage time (P < 0.05). It is concluded that ISF could maintain better microstructure, improve water-holding capacity and inhibit lipid oxidation during pork LT frozen storage.     

Changes in functional properties of common carp (Cyprinus carpio) myofibrillar protein as affected by ultrasound-assisted freezing

Ultrasound-assisted freezing (UF) has proven to be a method that can effectively increase the freezing rate of frozen food and improve its quality. The functional properties of myofibrillar proteins (MP) are important factors that affect the further processing quality of meat products. At present, the effect of UF on the functional properties of frozen MP is not yet clear. Therefore, in the present study, changes in the functional properties (emulsifying and gel properties) of MP in common carps (Cyprinus carpio) frozen with UF at different power levels were investigated. The results revealed that, compared with immersion freezing (IF), UF at 175 W (UF-175) effectively inhibited the decrease in protein solubility, absolute Zeta potential, emulsion activity index, storage modulus (G'), and loss modulus (G'') caused by freezing. UF-175 sample had lower protein turbidity, and smaller protein particle size than any other frozen samples (P < 0.05), which suggested that UF-175 inhibited protein aggregation induced by freezing. In addition, shorter T₂₁ and T₂₂ relaxation times were obtained in UF-175 sample than other frozen samples, indicating that UF-175 reduced the mobility of immobilized and free water. Accordingly, UF-175 sample had higher gel strength and water holding capacity than other frozen samples (P < 0.05). A denser and more uniform gel network structure was also found in UF-175 sample than other frozen samples. In general, improved functional properties of common carp MP can be achieved by optimal UF.     

Impact of different preservation treatments on lipids of the smooth clam Callista chione

The soft clam Callista chione is highly appreciated among marine inhabitants for nutritional, commercial and economic reasons. This work aims to determine the lipid classes’ profile of C. chione and the effect of different preservation treatments on them. C. chione meat was found to be a rich source of dietary phospholipids (PhLs), ω‐3 fatty acids and carotenoids, encouraging the exploitation of the species as human food. Among treatments, only marinating reduced the PhLs content. Parboiling and freezing resulted in a significant decrease in unsaturated fatty acids, while marinating caused partial replacement of polyunsaturated with monounsaturated fatty acids. Lipid quality indices remained favourable for a healthy diet. With the exception of astaxanthin, the rest of the carotenoids identified were susceptible to processing and frozen storage. Parboiling and freezing of the vacuum‐packed meats for up to 4 months would be most appropriate, among the treatments applied, for preserving the lipid quality of C. chione.     

Pulsed electric field treatment prior to freezing carrot discs significantly maintains their initial quality parameters after thawing

The interaction of pulsed electric fields (PEF) with different cryoprotectant and texturizing agents in quality retention of carrot discs was analysed. Increasing the permeability properties by PEF may lead to better accessibility of intracellular materials to freezing and thus reducing the freezing time, leading to better maintaining the texture after thawing. Carrot discs of 5 mm thickness were immersed in different solutions of CaCl₂, glycerol, trehalose and tap water, and subsequently were treated with PEF (1 kV/cm, 100 pulses, 4 Hz). Then, the samples were drained and packed along with a control group in separate prepared polypropylene pouches. All the samples were frozen at ?18 °C for 24 h and thawed during 3 h at ambient temperature (20 °C) the following day. The quality of the thawed carrot discs was certified by measuring weight loss, firmness, microscopic studies and CIE colorimetric attributes. All the PEF‐treated samples, no matter what solution they were soaked in, could significantly (P < 0.05) maintain the firmness as well as colour attributes. However, it was deducted that application of CaCl₂ in conjunction with PEF can result in a firmer texture. Firmness analyses determined that application of PEF alone results in 5.84 N, while its combination with CaCl₂ leads to higher value of 6.63 N. Firmness in control samples was found to be 3.46 N. The SEM studies supported the results of firmness analysis and depicted more integrity in the cell walls of the samples treated with CaCl₂ and glycerol. The weight loss values varied among different samples, and the highest amount and lowest amount were reported in CaCl₂ and solely PEF‐treated samples, respectively. There was no significant difference between the colour attributes measured in different groups including control sample (P > 0.05).     

Quality changes during the storage of dehydrated chicken kebab mix

The level of binders (starch, refined wheat flour and milk powder) was optimised with respect to sensory quality of ready‐to‐eat kebab made from a dehydrated mix using the experiment based on the Box–Behnken design. The optimised levels (as % of cooked meat) were 4.5% starch, 9.5% refined wheat flour and 2% milk powder. Dehydrated chicken kebab mix prepared with optimised quantities of binders and spices was packed in metalised polyester pouches, stored at ambient temperature (27 ± 2 °C) for 6 months and sampled periodically for quality evaluation. A gradual decrease (P ≤ 0.05) in pH from 5.8 to 5.5, increases (P ≤ 0.05) in a_w from 0.31% to 0.42%, in moisture from 5.4% to 6.2%, in free fatty acid values from 0.99 to 1.74 as per cent oleic acid and in thiobarbituric acid numbers from 2.9 to 5.3 mg malonaldehyde kg^?1 were observed during storage. Hunter colour a values increased (P ≤ 0.05) from 0.30 to 1.29, whereas changes in Hunter L (51.8–53.4) and in Hunter b (19.0–19.5) values were marginal (P ≥ 0.05) during storage. The chicken kebab mix was microbiologically safe as indicated by low bacterial counts and absence of coliforms throughout the storage period of 6 months. Fried chicken kebabs prepared from mix stored for up to 6 months were acceptable.     

Numerical modelling of the food freezing process in a quasi-hydrofluidisation system

The paper presents a study of food freezing using hydrofluidisation method, characterised by very high heat transfer coefficients exceeding 2500 W · m⁻² K⁻¹, which constitutes a novel and promising technology. A numerical analysis of a system with a stationary group of food products was performed. This study aimed to investigate the geometrical parameters governing the freezing process, i.e., the position of food products above the orifices (from 50 mm to 70 mm), their mutual position, the diameter of orifices (3 mm or 5 mm), and the spacing of the orifices in an array (from 8 mm to 12 mm). In this method, the freezing time was from 3 min for 10 mm spherical food sample in moderate refrigerating medium temperatures up to 12 min for 30 mm spherical sample. Moreover, the freezing times at different liquid temperatures were compared in the range of −20 °C to −5 °C. Reducing the temperature by 5 K may lead to shortening the process by up to 50%. The hydrofluidisation method was assessed versus the immersion freezing for spherical products of different sizes showing the reduction of the process time from about 35% to over 60%.     

The antioxidant capacity of polysaccharide from Laminaria japonica by citric acid extraction

An optimal citric acid extraction condition (pH 2.0; extraction temperature: 120 °C; extraction time: 3 h) was developed to obtain polysaccharide from Laminaria japonica. The yield of polysaccharide was 13.31 ± 0.08%, with IC₅₀ value of DPPH radical scavenging activity of 0.98 ± 0.01 mg mL^?1. The viscosity of polysaccharide extracted by citric acid (LJPA) was eight times lower than that of polysaccharide extracted by hot water (LJPW), which may be attributed to the low average molecular weight of LJPA (17.12 kDa). Gas chromatography analysis indicated that LJPA was composed of rhamnose, fucose, xylose, manose, glucose and galactose with relative molar percentages of 4.51%, 20.27%, 12.43%, 12.81%, 10.29% and 39.69% respectively. Furthermore, LJPA exhibited significantly higher antioxidant capacities including oxygen radical absorbance capacity (ORAC), ABTS radical scavenging activity and reducing power than LJPW. Citric acid extraction showed a positive influence on the polysaccharide degradation and antioxidant capacities of L. japonica.     

Physicochemical,microbiological, rheological,and sensory properties of yoghurts with new polysaccharide extracts from Lactarius volemus Fr. using three probiotics

Polysaccharide extracts (0.05 ~ 0.15% w/w) from Lactarius volemus Fr. were used as growth factors and were incorporated into three different probiotic yoghurts. Yoghurts with polysaccharide extracts had a significantly improved water‐retention capacity and reduced pH (P < 0.05). Polysaccharide extracts also significantly increased the viable count and essential amino acid content in the probiotic yoghurts (P < 0.05). The best sensory properties were achieved with the addition of 0.10% polysaccharide extracts. Our study suggests that polysaccharide extracts from L. volemus Fr. are a highly efficient growth factor for shortening the fermentation period and improving the quality of probiotic yoghurts.     

Viability of Lactobacillus acidophilus in rice bran‐enriched stirred yoghurt and the physicochemical and sensory characteristics of product during refrigerated storage

This study was aimed at investigating the fortification of probiotic yoghurt with rice bran to increase nutritional properties of the product. The different levels of rice bran (0.3%, 0.6%, 0.9% and 1.2%) were incorporated into milk. The yoghurt samples were produced after pasteurisation, addition of starter culture and 1% Lactobacillus acidophilus suspension (6 × 10⁸ CFU mL^?1) and incubation. During sample storage in refrigerator, the viability of L. acidophilus, viscosity and physicochemical and sensory properties of product were investigated. Rice bran significantly increased the viability of L. acidophilus (P < 0.05). In addition, all probiotic yoghurts incorporating rice bran indicated higher viscosity and acidity and lower pH and syneresis compared to plain yoghurts. Furthermore, increments in rice bran incorporation levels resulted in a reduction in consumers' sample preferences. In general, the addition of rice bran at a suitable level could increase L. acidophilus viability and improve quality attributes of yoghurt.     

Numerical modelling of conjugate heat and mass transfer during hydrofluidisation food freezing in different water solutions

A novel method of hydrofluidisation food freezing is numerically investigated in this paper. This technique is based on freezing small food products in a liquid medium under highly turbulent flow conditions when the heat transfer coefficient is higher than 1 000 W⋅m⁻²⋅K⁻¹, which depends on the operating and flow conditions. A numerical model was developed to characterise the freezing process in terms of the heat transfer and diffusion of liquid solution components into the food product. The study investigates the freezing process of spherical samples in binary solutions of ethanol (30%) and glycerol (40%) and ternary solution of ethanol and glucose (15%/25%). The developed model was employed to determine the concentration of the liquid solution in food samples and to quantify the effect of sample size, heat transfer coefficient, solution temperature and concentration on the process. The food sample size varied from 5 to 30 mm, and the heat transfer coefficients varied from 1 000 to 4 000 W⋅ m⁻²⋅ K⁻¹. The results confirm that a freezing time of 15 min for 30 mm diameter samples or less than 1 min for 5 mm diameter samples can be achieved with the hydrofluidisation method. The solution uptake was influenced by the solution type, sample size and process parameters and varied from 8.9 to 35 g of solute per kg of product for ethanol-glucose and glycerol solutions, respectively. This paper quantifies the advantages and possible limitations of hydrofluidisation, which has not yet been entirely studied, especially in terms of the mass absorption of different solutes.     

Effects of different thawing methods on the quality of chicken breast

Freezing and thawing technologies are widely used in meat industry. This study aimed to investigate the effects of freezing and different thawing methods (Control group, CG; water immersing thawing, WT; low temperature combined with high‐humidity thawing, LT; combined thawing 1 (WT 15 min, then LT), CT1; combined thawing 2 (LT 2 h, then WT), CT2) on the quality of chicken breast. The results showed that all thawing methods significantly increased shear force value, the gap between muscle fibres, the contents of malondialdehyde (MDA) and carbonyl compounds, meanwhile, decreased the pH, CIE a* value, total protein solubility and sarcoplasmic protein solubility, compared with CG (P < 0.05). Among different thawing methods, LT was most effective in decreasing thawing loss but it had the highest contents of MDA and carbonyl compounds (P < 0.05). CT1 significantly decreased shear force value and MDA content (P < 0.05). Overall, freezing and thawing process had a detrimental effect on the quality of chicken breast, and the extent was pronounced with different thawing methods. On the basis of shortening thawing time and keeping meat quality, the results of this study suggested that CT1 could be chosen as the better thawing method.     

Physicochemical and functional properties of whole and defatted meals from Mexican (Cucurbita pepo) pumpkin seeds

Chemical composition and some functional and thermal properties in whole pumpkin seed meal (WPSM) and defatted pumpkin seed meal (DPSM) were determined. The DPSM exhibited higher water absorption capacity (3 g H₂O per g sample), water solubility capacity (8.75%), oil absorption capacity (2.73 g oil per g sample), emulsifying capacity (61.71%), foaming capacity (51.92%) and gelling capacity (12% w/v) than the WPSM. The DPSM also had better swelling power (3.33% at 60 °C, rising to 4.31% at 90 °C), higher phase transition temperatures (T₀ = 80.04 °C, T_p = 86.50 °C and T_f = 93.20 °C) and a higher phase transition energy (0.93 J g^?1). However, the WPSM had higher bulk density (0.57 g cm^?3) and better foam stability (from 30 to 120 min). Micrographs showed defatting to cause microstructural changes in meal starch granules and proteins. Its high protein content makes the DPSM a potential alternative input in the food industry.     

Synergistic effect between Helichrysum italicum essential oil and cold nitrogen plasma against Staphylococcus aureus biofilms on different food‐contact surfaces

Staphylococcus aureus is the most common pathogen in human, and the most diseases produced by S. aureus are associated with biofilms. Helichrysum italicum essential oil (EO), as a natural and safe spice, was employed to disperse S. aureus biofilm by cold nitrogen plasma (CNP) assist. After S. aureus biofilm formation on food container surfaces, they were exposed to CNP and then treated with Helichrysum italicumEO for biofilm dispersion. The population of S. aureus biofilm was approximately reduced by 2 logs after individual treatment of 0.5 mg mL^?1 Helichrysum italicumEO or 400 W CNP. Interestingly, the combined treatment of Helichrysum italicumEO (0.5 mg mL^?1, 40 min) and CNP (400 W, 1 min) reduced the S. aureus viable count in biofilm below 2 logs CFU per cm² after 1‐day storage. Therefore, the synergetic treatment holds great promise to improve the current treatment systems of bacterial contamination on different food‐contact surfaces.     

Antioxidant activity of prebiotic ginseng polysaccharides combined with potential probiotic Lactobacillus plantarum C88

The potential prebiotic properties of Panax ginseng polysaccharides were studied using ten strains of Lactobacillus plantarum isolated from traditional Chinese fermented foods. These probiotics showed different growth characteristics depending on the extract and strain specificity. L. plantarum C88 showed higher cell densities and growth rate when cultured on P. ginseng polysaccharides. In the in vitro antioxidant assay, P. ginseng polysaccharides combined with L. plantarum C88 were found to possess significant DPPH, ABTS and superoxide anion radicals scavenging activities, and acidic polysaccharides showed better antioxidant activity than neutral polysaccharides. Furthermore, we evaluated the antioxidant effect of acidic P. ginseng polysaccharide combined with L. plantarum C88 strain in natural ageing mice in vivo. Acidic P. ginseng polysaccharide and L. plantarum C88 together inhibited the formation of malondialdehyde (MDA) and increased the activities of superoxide dismutase (SOD), glutathione peroxidase (GSH‐Px), catalase (CAT) and total antioxidant capacities (T‐AOC) in a dose‐dependent manner.     

Preparation of stable microcapsules from disrupted cell of Haematococcus pluvialis by spray drying

Haematococcus pluvialis, including astaxanthin, disrupted by high‐pressure homogenisation was microencapsulated with Maillard reaction products as wall materials by spray drying. The microcapsules were characterised by scanning electron microscope, size analysis and also the storage stability. The optimised cell disruption process for H. pluvialis based on response surface optimisation was 70 MPa of pressure, 7.38% of H. pluvialis concentration and homogenisation once with a disruption rate of 98.96 ± 0.12%. The optimised spray drying process consisted of a wall‐to‐core material ratio of 2.4:1, inlet temperature of 180 °C and outlet temperature of 80 °C with a microencapsulation rate and microcapsule production rate of (92.1 ± 0.1)% and (97.7 ± 0.2)%, respectively. Characterisation and stability test showed that this microencapsulation process ensured the stability of astaxanthin.     

Effect of inulin on growth and bacteriocin production by Lactobacillus plantarum in stationary and shaken cultures

The prebiotic effect of inulin added to MRS medium on growth and bacteriocin production by L. plantarum ST16 Pa was investigated in stationary cultures in anaerobic jars with medium containing 0.025% sodium thioglycolate or in flasks shaken at 100 rpm. In the presence of 1% inulin in anaerobic stationary cultures, this strain produced lactic acid at a level that was 36.5% higher than in the absence of the polysaccharide. In shaken cultures without inulin, cell count was 54% higher than in the stationary ones. Under stationary conditions in anaerobic jars, the addition of inulin increased the maximum specific growth rate from 0.37 to 0.49 h^?1 and reduced the generation time from 1.85 h to 1.40 h. Consequently, the exponential phase was shortened from 12 to 9 h when the cells were grown in stationary cultures with the oxygen scavenger. Despite this effect of inulin on growth rate, stationary cultures without inulin displayed higher antimicrobial activity against Listeria monocytogenes L104 (3200 AU/mL) than cultures with inulin (1600 AU/mL); therefore, inulin behaved as a compound able to accelerate growth rather than to stimulate bacteriocin production. The results presented in this study are very promising, as L. monocytogenes is a well‐known foodborne pathogenic microorganism. Moreover, L. plantarum ST16 Pa has proven to be a potential producer of a natural food preservative at an industrial level.