Plasmon-promoted oxygen evolution catalysis with Ag nanocrystals loaded α-Co(OH)2 nanosheets

Exploration of low-cost and high efficiency oxygen evolution reaction (OER) electrocatalysts is very important for the large-scale industrial application of alkaline water splitting driven by electricity. The present promising cobalt-based catalysts still leave room to meet the activity requirement. Here, a composite catalyst of α-Co(OH)₂/Ag was synthesized by a simple photochemical deposition route, which was designed to improve the electrocatalytic activity for OER. Moreover, a photoinduced surface plasmon on Ag particles was found to further enhance the catalytic performance under low power of laser irradiation. Loading of silver nanocrystals on α-Co(OH)₂ nanosheets can decrease the overpotential towards OER for 10 mA cm^?2 from 320 to 288 mV, this value can be further decreased of 45 mV under 1000 mW of laser irradiation with a wavelength of 532 nm. The derivation of the catalyst during the OER process was examined, which indicates the structural transformation from α-Co(OH)₂ to CoOOH. The photoinduced surface plasmon modulates the electronic structure of cobalt sites, facilitates the formation of active cobalt species, and induces the enhancement of catalytic activity. These findings may give some hints for plasmon-induced electrocatalysis and the design of advanced electrocatalysts.     

Pseudocapacitive Ni‐Co‐Fe Hydroxides/N‐Doped Carbon Nanoplates‐Based Electrocatalyst for Efficient Oxygen Evolution

The oxygen evolution reaction (OER) catalytic activity of a transition metal oxides/hydroxides based electrocatalyst is related to its pseudocapacitance at potentials lower than the OER standard potential. Thus, a well‐defined pseudocapacitance could be a great supplement to boost OER. Herein, a highly pseudocapacitive Ni‐Fe‐Co hydroxides/N‐doped carbon nanoplates (NiCoFe‐NC)‐based electrocatalyst is synthesized using a facile one‐pot solvothermal approach. The NiCoFe‐NC has a great pseudocapacitive performance with 1849 F g^?1 specific capacitance and 31.5 Wh kg^?1 energy density. This material also exhibits an excellent OER catalytic activity comparable to the benchmark RuO₂ catalysts (an initiating overpotential of 160 mV and delivering 10 mA cm^?2 current density at 250 mV, with a Tafel slope of 31 mV dec^?1). The catalytic performance of the optimized NiCoFe‐NC catalyst could keep 24 h. X‐ray photoelectron spectroscopy, electrochemically active surface area, and other physicochemical and electrochemical analyses reveal that its great OER catalytic activity is ascribed to the Ni‐Co hydroxides with modular 2‐Dimensional layered structure, the synergistic interactions among the Fe(III) species and Ni, Co metal centers, and the improved hydrophily endowed by the incorporation of N‐doped carbon hydrogel. This work might provide a useful and general strategy to design and synthesize high‐performance metal (hydr)oxides OER electrocatalysts.     

Photo-assistant electrocatalytic activity improvement towards oxygen evolution

As one of the most important reactions involved in water splitting, oxygen evolution reaction (OER) suffers from a slow kinetic. Herein, with a composite catalyst of Au/Co-FeOOH, it was shown that the photo-irradiation could greatly activate the catalytic performance for OER due to the plasmon effect of Au nanoparticles. With 532 nm of photo-irradiation, the overpotential at 10 mA cm⁻² for OER decreased from 386 to 309 mV with the optimized composite. It is believed that the two factors, hot electron excitation promoting the formation of active species and the charge transfer modulating the electronic structure of active sites, are responsible for the enhancement of catalytic activity. These findings highlighted the possibility of activation of OER catalysis by photo-irradiation and would open up a new route for the design of advanced electrocatalysts.     

Self‐Assembled Ruddlesden–Popper/Perovskite Hybrid with Lattice‐Oxygen Activation as a Superior Oxygen Evolution Electrocatalyst

The oxygen evolution reaction (OER) is pivotal in multiple gas‐involved energy conversion technologies, such as water splitting, rechargeable metal–air batteries, and CO₂/N₂ electrolysis. Emerging anion‐redox chemistry provides exciting opportunities for boosting catalytic activity, and thus mastering lattice‐oxygen activation of metal oxides and identifying the origins are crucial for the development of advanced catalysts. Here, a strategy to activate surface lattice‐oxygen sites for OER catalysis via constructing a Ruddlesden–Popper/perovskite hybrid, which is prepared by a facile one‐pot self‐assembly method, is developed. As a proof‐of‐concept, the unique hybrid catalyst (RP/P‐LSCF) consists of a dominated Ruddlesden–Popper phase LaSr₃Co_1.5Fe_1.5O_10‐δ (RP‐LSCF) and second perovskite phase La_0.25Sr_0.75Co_0.5Fe_0.5O_3‐δ (P‐LSCF), displaying exceptional OER activity. The RP/P‐LSCF achieves 10 mA cm^?2 at a low overpotential of only 324 mV in 0.1 m KOH, surpassing the benchmark RuO₂ and various state‐of‐the‐art metal oxides ever reported for OER, while showing significantly higher activity and stability than single RP‐LSCF oxide. The high catalytic performance for RP/P‐LSCF is attributed to the strong metal–oxygen covalency and high oxygen‐ion diffusion rate resulting from the phase mixture, which likely triggers the surface lattice‐oxygen activation to participate in OER. The success of Ruddlesden–Popper/perovskite hybrid construction creates a new direction to design advanced catalysts for various energy applications.     

IrPd Nanoalloy-Structured Bifunctional Electrocatalyst for Efficient and pH-Universal Water Splitting

The lack of high efficiency and pH-universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large-scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mg_Ir⁻¹ in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir₄₄Pd₅₆/KB catalyst shows a stability of >20 h at a current of 250 mA cm⁻² for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.     

Ultrafast Formation of Amorphous Bimetallic Hydroxide Films on 3D Conductive Sulfide Nanoarrays for Large‐Current‐Density Oxygen Evolution Electrocatalysis

Developing nonprecious oxygen evolution electrocatalysts that can work well at large current densities is of primary importance in a viable water‐splitting technology. Herein, a facile ultrafast (5 s) synthetic approach is reported that produces a novel, efficient, non‐noble metal oxygen‐evolution nano‐electrocatalyst that is composed of amorphous Ni–Fe bimetallic hydroxide film‐coated, nickel foam (NF)‐supported, Ni₃S₂ nanosheet arrays. The composite nanomaterial (denoted as Ni‐Fe‐OH@Ni₃S₂/NF) shows highly efficient electrocatalytic activity toward oxygen evolution reaction (OER) at large current densities, even in the order of 1000 mA cm^?2. Ni‐Fe‐OH@Ni₃S₂/NF also gives an excellent catalytic stability toward OER both in 1 m KOH solution and in 30 wt% KOH solution. Further experimental results indicate that the effective integration of high catalytic reactivity, high structural stability, and high electronic conductivity into a single material system makes Ni‐Fe‐OH@Ni₃S₂/NF a remarkable catalytic ability for OER at large current densities.     

Co‐Induced Electronic Optimization of Hierarchical NiFe LDH for Oxygen Evolution

Developing efficient and stable non‐noble electrocatalysts for the oxygen evolution reaction (OER) remains challenging for practical applications. While nickel–iron layered double hydroxides (NiFe‐LDH) are emerging as prominent candidates with promising OER activity, their catalytic performance is still restricted by the limited active sites, poor conductivity and durability. Herein, hierarchical nickel–iron–cobalt LDH nanosheets/carbon fibers (NiFeCo‐LDH/CF) are synthesized through solvent‐thermal treatment of ZIF‐67/CF. Extended X‐ray adsorption fine structure analyses reveal that the Co substitution can stabilize the Fe local coordination environment and facilitate the π‐symmetry bonding orbital in NiFeCo‐LDH/CF, thus modifying the electronic structures. Coupling with the structural advantages, including the largely exposed active surface sites and facilitated charge transfer pathway ensured by CF, the resultant NiFeCo‐LDH/CF exhibits excellent OER activity with an overpotential of 249 mV at 10 mA cm^?1 as well as robust stability over 20 h.     

Cobalt Covalent Doping in MoS2 to Induce Bifunctionality of Overall Water Splitting

The layer‐structured MoS₂ is a typical hydrogen evolution reaction (HER) electrocatalyst but it possesses poor activity for the oxygen evolution reaction (OER). In this work, a cobalt covalent doping approach capable of inducing HER and OER bifunctionality into MoS₂ for efficient overall water splitting is reported. The results demonstrate that covalently doping cobalt into MoS₂ can lead to dramatically enhanced HER activity while simultaneously inducing remarkable OER activity. The catalyst with optimal cobalt doping density can readily achieve HER and OER onset potentials of ?0.02 and 1.45 V (vs reversible hydrogen electrode (RHE)) in 1.0 m KOH. Importantly, it can deliver high current densities of 10, 100, and 200 mA cm^?2 at low HER and OER overpotentials of 48, 132, 165 mV and 260, 350, 390 mV, respectively. The reported catalyst activation approach can be adapted for bifunctionalization of other transition metal dichalcogenides.     

Amorphous Intermediate Derivative from ZIF‐67 and Its Outstanding Electrocatalytic Activity

Increasing active sites is an effective method to enhance the catalytic activity of catalysts. Amorphous materials have attracted considerable attention in catalysis because of their abundant catalytic active sites. Herein, a series of derivatives is prepared via the low‐temperature heat treatment of ZIF‐67 hollow sphere at different temperatures. An intermediate product with an amorphous structure is formed during transformation from ZIF‐67 to Co₃O₄ nanocrystallines when ZIF‐67 hollow sphere is heat treated at 260 °C for 3 h. The chemical composition of the amorphous derivative is similar to that of ZIF‐67, and the carbon and nitrogen contents of the amorphous derivative are obviously higher than those of crystalline samples obtained at 270 °C or higher. As electrocatalysts for the oxygen evolution reaction (OER) and nonenzymatic glucose sensing, the amorphous derivative exhibits significantly better catalytic activity than crystalline Co₃O₄ samples. The amorphous sample as an OER catalyst has a low overpotential of 352 mV at 10 mA cm^?2. The amorphous sample as an enzyme‐free glucose sensing catalyst can provide a low detection limit of 3.9 × 10^?6 m and a high sensitivity of 1074.22 µA mM^?1 cm^?2.     

Formation of Branched Ruthenium Nanoparticles for Improved Electrocatalysis of Oxygen Evolution Reaction

Branched nanoparticles are one of the most promising nanoparticle catalysts as their branch sizes and surfaces can be tuned to enable both high activity and stability. Understanding how the crystallinity and surface facets of branched nanoparticles affect their catalytic performance is vital for further catalyst development. In this work, a synthesis is developed to form highly branched ruthenium (Ru) nanoparticles with control of crystallinity. It is shown that faceted Ru branched nanoparticles have improved stability and activity in the oxygen evolution reaction (OER) compared with polycrystalline Ru nanoparticles. This work achieves a low 180 mV overpotential at 10 mA cm^?2 for hours, demonstrating that record‐high stability for Ru nanocrystals can be achieved while retaining high activity for OER. The superior electrocatalytic performance of faceted Ru branched nanoparticles is ascribed to the lower Ru dissolution rate under OER conditions due to low‐index facets on the branch surfaces.     

Controllable Construction of Core–Shell Polymer@Zeolitic Imidazolate Frameworks Fiber Derived Heteroatom‐Doped Carbon Nanofiber Network for Efficient Oxygen Electrocatalysis

Designing rational nanostructures of metal–organic frameworks based carbon materials to promote the bifunctional catalytic activity of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is highly desired but still remains a great challenge. Herein, an in situ growth method to achieve 1D structure‐controllable zeolitic imidazolate frameworks (ZIFs)/polyacrylonitrile (PAN) core/shell fiber (PAN@ZIFs) is developed. Subsequent pyrolysis of this precursor can obtain a heteroatom‐doped carbon nanofiber network as an efficient bifunctional oxygen electrocatalyst. The electrocatalytic performance of derived carbon nanofiber is dominated by the structures of PAN@ZIFs fiber, which is facilely regulated by efficiently controlling the nucleation and growth process of ZIFs on the surface of polymer fiber as well as optimizing the components of ZIFs. Benefiting from the core–shell structures with appropriate dopants and porosity, as‐prepared catalysts show brilliant bifunctional ORR/OER catalytic activity and durability. Finally, the rechargeable Zn‐air battery assembled from the optimized catalyst (CNF@Zn/CoNC) displays a peak power density of 140.1 mW cm^?2, energy density of 878.9 Wh kg_Zn^?1, and excellent cyclic stability over 150 h, giving a promising performance in realistic application.     

Single Ni Atoms and Clusters Embedded in N‐Doped Carbon “Tubes on Fibers” Matrix with Bifunctional Activity for Water Splitting at High Current Densities

Among the bifunctional catalysts for water splitting, recently emerged transition‐metal single‐atom catalysts are theoretically considered to possess high potential, while the experimental activity is not satisfactory yet. Herein, an exceptionally efficient trifunctional metal–nitrogen–carbon (M–N–C) catalyst electrode, composed of a hierarchical carbon matrix embedding isolated nickel atoms with nickel–iron (NiFe) clusters, is presented. 1D microfibers and nanotubes grow sequentially from 2D nanosheets as sacrificial templates via two stages of solution‐ and solid‐phase reactions to form a 1D hierarchy. Exceptionally efficient bifunctional activity with an overpotential of only 13 mV at 10 mA cm^?2 toward hydrogen evolution reaction (HER) and an overpotential of 210 mV at 30 mA cm^?2 toward oxygen evolution reaction (OER) is obtained, surpassing each monofunctional activity ever reported. More importantly, an overpotential of only 126 and 326 mV is required to drive 500 mA cm^?2 toward the HER and OER, respectively. For the first time, industrial‐scale water splitting with two bifunctional catalyst electrodes with a current density of 500 mA cm^?2 at a potential of 1.71 V is demonstrated. Lastly, trifunctional catalytic activity including oxygen reduction reaction is also proven with a half‐wave potential at 0.848 V.     

Exploring The Synergistic Effect Of CoSeP/CoP Interface Catalyst For Efficient Urea Electrolysis

Electrocatalytic oxidation of urea (UOR) is a potential energy-saving hydrogen production technology that can replace oxygen evolution reaction (OER). Therefore, CoSeP/CoP interface catalyst is synthesized on nickel foam using hydrothermal, solvothermal, and in situ template methods. The strong interaction of tailored CoSeP/CoP interface promotes the hydrogen production performance of electrolytic urea. During the hydrogen evolution reaction (HER), the overpotential can reach 33.7 mV at 10 mA cm⁻². The cell voltage can reach 1.36 V at 10 mA cm⁻² in the overall urea electrolytic process. Notably, the overall urine electrolysis performance of the catalyst in the human urine medium can reach 1.40 V at 10 mA cm⁻² and can exhibit durable cycle stability at 100 mA cm⁻². Density functional theory (DFT) proves that the CoSeP/CoP interface catalyst can better adsorb and stabilize reaction intermediates CO* and NH* on its surface through a strong synergistic effect, thus enhancing the catalytic activity.     

Amorphous Cobalt Phyllosilicate with Layered Crystalline Motifs as Water Oxidation Catalyst

The development of a high‐performance oxygen evolution reaction (OER) catalyst is pivotal for the practical realization of a water‐splitting system. Although an extensive search for OER catalysts has been performed in the past decades, cost‐effective catalysts remain elusive. Herein, an amorphous cobalt phyllosilicate (ACP) with layered crystalline motif prepared by a room‐temperature precipitation is introduced as a new OER catalyst; this material exhibits a remarkably low overpotential (η ≈ 367 mV for a current density of 10 mA cm^?2). A structural investigation using X‐ray absorption spectroscopy reveals that the amorphous structure contains layered motifs similar to the structure of CoOOH, which is demonstrated to be responsible for the OER catalysis based on density functional theory calculations. However, the calculations also reveal that the local environment of the active site in the layered crystalline motif in the ACP is significantly modulated by the silicate, leading to a substantial reduction of η of the OER compared with that of CoOOH. This work proposes amorphous phyllosilicates as a new group of efficient OER catalysts and suggests that tuning of the catalytic activity by introducing redox‐inert groups may be a new unexplored avenue for the design of novel high‐performance catalysts.     

Highly Efficient and Stable Water‐Oxidation Electrocatalysis with a Very Low Overpotential using FeNiP Substitutional‐Solid‐Solution Nanoplate Arrays

The development of efficient water‐oxidation electrocatalysts based on inexpensive and earth‐abundant materials is significant to enable water splitting as a future renewable energy source. Herein, the synthesis of novel FeNiP solid‐solution nanoplate (FeNiP‐NP) arrays and their use as an active catalyst for high‐performance water‐oxidation catalysis are reported. The as‐prepared FeNiP‐NP catalyst on a 3D nickel foam substrate exhibits excellent electrochemical performance with a very low overpotential of only 180 mV to reach a current density of 10 mA cm^?2 and an onset overpotential of 120 mV in 1.0 m KOH for the oxygen evolution reaction (OER). The slope of the Tafel plot is as low as 76.0 mV dec^?1. Furthermore, the long‐term electrochemical stability of the FeNiP‐NP electrode is investigated by cyclic voltammetry (CV) at 1.10–1.55 V versus reversible hydrogen electrode (RHE), demonstrating very stable performance with negligible loss in activity after 1000 CV cycles. This present FeNiP‐NP solid solution is thought to represent the best OER catalytic activity among the non‐noble metal catalysts reported so far.     

Boosting Alkaline Hydrogen and Oxygen Evolution Kinetic Process of Tungsten Disulfide-Based Heterostructures by Multi-Site Engineering

Alkaline water electrolysis is an advanced technology for scalable H₂ production using surplus electricity from intermittent energy sources, but it remains challenging for non-noble electrocatalysts to split water into hydrogen and oxygen efficiently, especially for tungsten disulfide (WS₂)-based catalysts. Density functional theory calculations in combination with experimental study are used to establish a multi-site engineering strategy for developing robust WS₂-based hybrid electrocatalyst on mesoporous bimetallic nitride (Ni₃FeN) nanoarrays for bifunctional water splitting. This ingenious design endows the catalyst with numerous edge sites chemically bonded with the conductive scaffold, which are favorable for water dissociation and hydrogen adsorption. Benefiting from the synergistic advantages, the N-WS₂/Ni₃FeN hybrid exhibits exceptional bifunctional properties for hydrogen and oxygen evolution reactions (HER and OER) in base with excellent large-current durability, requiring 84 mV to afford 10 mA cm^?2 for HER, and 240 mV at 100 mA cm^?2 for OER, respectively. Assembling the catalytic materials as both the anode and cathode to construct an electrolyzer, it is actualized very good activities for overall water splitting with only 1.5 V to deliver 10 mA cm^?2, outperforming the IrO₂⁽⁺⁾//Pt^(?) coupled electrodes and many non-noble bifunctional electrocatalysts thus far. This work provides a promising avenue for designing WS₂-based heterogeneous electrocatalysts for water electrolysis.     

Catalytic Microtubular Jet Engines Self‐Propelled by Accumulated Gas Bubbles

Strain‐engineered microtubes with an inner catalytic surface serve as self‐propelled microjet engines with speeds of up to ≈2 mm s^?1 (approximately 50 body lengths per second). The motion of the microjets is caused by gas bubbles ejecting from one opening of the tube, and the velocity can be well approximated by the product of the bubble radius and the bubble ejection frequency. Trajectories of various different geometries are well visualized by long microbubble tails. If a magnetic layer is integrated into the wall of the microjet engine, we can control and localize the trajectories by applying external rotating magnetic fields. Fluid (i.e., fuel) pumping through the microtubes is revealed and directly clarifies the working principle of the catalytic microjet engines.     

Atomic Iridium Incorporated in Cobalt Hydroxide for Efficient Oxygen Evolution Catalysis in Neutral Electrolyte

Developing highly efficient catalysts for oxygen evolution reaction (OER) in neutral media is extremely crucial for microbial electrolysis cells and electrochemical CO₂ reduction. Herein, a facile one‐step approach is developed to synthesize a new type of well‐dispersed iridium (Ir) incorporated cobalt‐based hydroxide nanosheets (nominated as CoIr) for OER. The Ir species as clusters and single atoms are incorporated into the defect‐rich hydroxide nanosheets through the formation of rich Co–Ir species, as revealed by systematic synchrotron radiation based X‐ray spectroscopic characterizations combining with high‐angle annular dark‐field scanning transmission electron microscopy measurement. The optimized CoIr with 9.7 wt% Ir content displays highly efficient OER catalytic performance with an overpotential of 373 mV to achieve the current density of 10 mA cm^?2 in 1.0 m phosphate buffer solution, significantly outperforming the commercial IrO₂ catalysts. Further characterizations toward the catalyst after undergoing OER process indicate that unique Co oxyhydroxide and high valence Ir species with low‐coordination structure are formed due to the high oxidation potentials, which authentically contributes to superior OER performance. This work not only provides a state‐of‐the‐art OER catalyst in neutral media but also unravels the root of the excellent performance based on efficient structural identifications.     

Ni‐Fe Nitride Nanoplates on Nitrogen‐Doped Graphene as a Synergistic Catalyst for Reversible Oxygen Evolution Reaction and Rechargeable Zn‐Air Battery

Obtaining bifunctional electrocatalysts with high activity for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is a main hurdle in the application of rechargeable metal‐air batteries. Earth‐abundant 3d transition metal‐based catalysts have been developed for the OER and ORR; however, most of these are based on oxides, whose insulating nature strongly restricts their catalytic performance. This study describes a metallic Ni‐Fe nitride/nitrogen‐doped graphene hybrid in which 2D Ni‐Fe nitride nanoplates are strongly coupled with the graphene support. Electronic structure of the Ni‐Fe nitride is changed by hybridizing with the nitrogen‐doped graphene. The unique heterostructure of this hybrid catalyst results in very high OER activity with the lowest onset overpotential (150 mV) reported, and good ORR activity comparable to that for commercial Pt/C. The high activity and durability of this bifunctional catalyst are also confirmed in rechargeable zinc‐air batteries that are stable for 180 cycles with an overall overpotential of only 0.77 V at 10 mA^?2.     

Strain-Regulated Pt–NiO@Ni Sub-Micron Particles Achieving Bifunctional Electrocatalysis for Zinc–Air Battery

Highly active bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) have always been the key factors to affect the performance of zinc–air batteries. However, integrating the independent reaction sites of ORR and OER in a catalyst remains a major challenge. Herein, a collaborative strategy based on defect induction and doping is proposed to prepare the strain-regulated Pt–NiO@Ni sub-micron particles (Pt–NiO@Ni SP). Benefiting from the synergistic effect of tensile strain and Pt-doped, the metallic Ni-based sub-micron particles with tensile strain as the catalyst carriers can effectively optimize the electronic distribution of atomic structures in Pt and NiO on the surface of particles, leading to reduce the energy barrier of intermediates for ORR and OER. Consequently, the Pt–NiO@Ni SP exhibits outstanding bifunctional catalytic activity with the ΔE index of 0.65 V under a low Pt loading, outperforming that of the benchmark Pt/C+IrO₂ catalysts (0.76 V). Impressively, the Pt–NiO@Ni SP-based liquid zinc–air battery develops a high open-circuit potential (1.47 V), excellent energy density (188.2 mW cm⁻²), and favorable cyclic charge–discharge cycling durability (200 h at 20 mA cm⁻²). This work provides an innovative avenue for the rational construction of highly active bifunctional electrocatalysts for practical applications.