Interprovenance variation in the composition of <Emphasis Type="Italic">Moringa oleifera</Emphasis> oilseeds from Pakistan

Interprovenance variation was examined in the composition of Moringa oleifera oilseeds from Pakistan. The hexane-extracted oil content of M. oleifera seeds harvested in the vicinity of the University of Agriculture, Faisalabad (Punjab, Pakistan), Bahauddin Zakariya University (Multan, Pakistan), and the University of Sindh, Jamshoro (Sindh, Pakistan), ranged from 33.23 to 40.90%. Protein, fiber, moisture, and ash contents were found to be 28.52–34.00, 6.52–7.50, 5.90–7.00, and 6.52–7.50%, respectively. The physical and chemical parameters of the extracted M. oleifera oils were as follows: iodine value, 67.20–71.00; refractive index (40°C), 1.4570–1.4637; density (24°C), 0.9012–0.9052 mg/mL; saponification value, 177.29–184.10; unsaponifiable matter, 0.60–0.83%; color (1-in. cell), 1.00–1.50 R+20.00–30.00Y; smoke point, 198–202°C; and acidity (% as oleic acid), 0.50–0.74. Tocopherols (α, γ, and δ) accounted for 114.50–140.42, 58.05–86.70, and 54.20–75.16 mg/kg, respectively, of the oils. The induction periods (Rancimat, 20 L/h, 120°C) of the crude oils were 9.64–10.66 h and were reduced to 8.29–9.10 h after degumming. Specific extinctions at 232 and 270 nm were 1.80–2.50 and 0.54–1.00, respectively. The major sterol fractions of the oils were campesterol (14.13–17.00%), stigmasterol (15.88–19.00%), β-sitosterol (45.30–53.20%), and ͤ⁵-avenasterol (8.84, 11.05%). The Moringa oils were found to contain high levels of oleic acid (up to 76.00%), followed by palmitic, stearic, behenic, and arachidic acids up to levels of 6.54, 6.00, 7.00, and 4.00%, respectively. Most of the parameters of M. oleifera oils indigenous to different agroclimatic regions of Pakistan were comparable to those of typical Moringa seed oils reported in the literature. The results of the present analytical study, compared with those for different vegetable oils, showed M. oleifera to be a potentially valuable oilseed crop.     

Physico-Chemical Characterization of <Emphasis Type="Italic">Moringa concanensis</Emphasis> Seeds and Seed Oil

The present work reports the characterization and comparison of Moringa concanensis seed oil from Tharparkar (a drought hit area), Pakistan. The hexane-extracted oil content of M. concanensis seeds ranged from 37.56 to 40.06% (average 38.82%). Protein, fiber, moisture and ash contents were found to be 30.07, 6.00, 5.88 and 9.00%, respectively. The extracted oil exhibited an iodine value of 67.00; a refractive index (40 °C) of 1.4648; its density (24 °C) was 0.8660 mg mL⁻¹; the saponification value (mg of KOH g⁻¹ of oil) was 179.00; unsaponifiable matter 0.78%; color (1 in. cell) 1.90R + 19.00Y; and acidity (% as oleic acid) 0.34%. Tocopherols (α, γ, and δ) in the oil accounted for 72.11, 9.26 and 33.87 mg kg⁻¹, respectively. Specific extinctions at 232 and 270 nm were 3.17 and 0.65, respectively. The peroxide and p-anisidine values of the oil were found to be 1.75 and 1.84 meq kg⁻¹, respectively. The induction periods (Rancimat, 20 L h⁻¹, 120 °C) of the crude oil was 10.81 h and reduced to 8.90 h after degumming. The M. concanensis oil was found to contain high levels of oleic acid (up to 68.00%) followed by palmitic, stearic, behenic, and arachidic acids up to levels of 11.04, 3.58, 3.44 and 7.09%, respectively. The results of the present analytical study, compared with those for other Moringa species and different vegetable oils, showed M. concanensis to be a potentially valuable non-conventional seed crop for high quality oil.     

Partial purification of <Emphasis Type="Italic">nigella sativa</Emphasis> L. Seed lipase and its application in hydrolytic reactions. Enrichment of γ-linolenic acid from borage oil

Selective hydrolysis of borage (Borago officinalis L.) oil was catalyzed by two lipase preparations of Nigella sativa L. seeds at 40°C in a mixture of borage oil, water, and hexane. Ammonium sulfate-precipitated lipase (Nigella PL) and lipase partially purified by DEAE-ion exchange chromatography (Nigella CPL) exhibited a negative specificity toward γ-linolenic acid (GLA). Best results were obtained in the experiments conducted with 330 U/g oil of Nigella PL and 200 U/g oil of nigella CPL. When 330 U/g oil of Nigella PL was used, after 8 h the GLA level rose from 21.9% in the starting oil to 29.6 and 41.8% in TAG and DAG fractions of the product mixtures, respectively (1.5-fold enrichment of GLA in the total unhydrolyzed acylglycerol fraction). At 200 U/g oil enzyme concentration of Nigella CPL, after 77 h maximum GLA enrichment was observed in the DAG fraction. The GLA content of the DAG increased to 34.6%, corresponding to almost 1.6-fold enrichment. The relative inability of Nigella sativa lipase(s) to hydrolyze γ-linolenoyl moieties of TAG can be used for the enrichment of this acid in the unhydrolyzed acylglycerol fractions of GLA-containing oils.     

Increase in the γ-linolenic acid content by solvent winterization of fungal oil extracted fromMortierella genus

The fungal oil extracted fromMortierella ramanniana var.angulispora (IFO 8187) was solvent winterized in order to raise the content of γ-linolenic acid (GLA). Effects of winterization conditions (solvent, oil concentration in the solvent and temperature) and changes of glyceride compositions were discussed. The fungal oil was separated into four diglycerides and 17 triglycerides (TG) with high performance liquid chromatography. The predominant species were POO, POP and LOP, whose contents were 24.4, 22.9 and 9.4% of the total TG, respectively. Ethanol at 4°C gave the highest GLA content of 10.5% in spite of lower yield than with acetone at −20°C. The highest separation efficiency for GLA (η_GLA) was 0.27 with acetone at −20°C and 10% oil concentration, resulting in 8.3% of GLA from the fungal oil at 5.7% LGA. In case of lower oil concentration at 5–20%, η_GLA showed higher in the following order: acetone (−20°C)>n-hexane (−20°C)>acetone (4°C)>petroleum ether (−20°C). The winterization process also proved to be effective for the separation of TG type, Sa₂U (Sa; saturated fatty acid; U, unsaturated fatty acid) into the crystallized fraction and SaU₂ into the liquid fraction. Acetone at −20°C showed higher separation efficiency for triunsaturated TG than the other solvents.     

FA composition and regiospecific analysis of Acer saccharum (sugar maple tree) and Acer saccharinum (silver maple tree) seed oils

GC analysis was performed to determine regiospecific distribution and FA composition in seed oils of the Aceraceae species, Acer saccharum and A. saccharinum. The oil content in the seeds was low at 5.0% in A. saccharum and 5.8% in A. saccharinum, and the main FA were linoleic (30.8 and 29.4%), oleic (21.3 and 27.6%), palmitic (10.1 and 10.5%), and cis-vaccenic (9.4 and 7.9%) acids, respectively. In addition, both oils contained long-chain monoenes of the n−9 and n−7 groups, including 11-eicosenoic, 13-docosenoic, 15-tetracosenoic, 13-eicosenoic, and 15-docosenoic acids, whereas γ-linolenic acid accounted for 0.8% of total FA in A. saccharum, and 0.5% in A. saccharinum. Regiospecific analysis, performed using the methodology of dibutyroyl derivatives of MAG, indicated that linoleic, oleic, and linolenic acids were mainly esterified at the internal position of TAG in both seed oils, whereas long-chain monoenes of the n−7 group were almost exclusively esterified on the external positions.     

Surface phenomena of fats for parenteral nutrition

Summary Surface tensions of natural vegetable oils of known origin and processing conditions have been measured over the temperature range 25°–27° by means of a modification of the capillary rise method. Interfacial tensions against water of the crude and refined oils have been determined at 25°. The surface tensions and interfacial tensions against water of 1,3-dipalmito-2-lactin at 75° and of a synthetic fat at 55° have been determined. The method of Least Squares was applied to the surface tension-temperature data to obtain equations of the form, γ=a−bt, where γ is the surface tension in dynes cm⁻¹, t is the temperature in °C., anda andb are the least square factors. Only the crude rice, olive, and cottonseed oils have interfacial tensions against water less than 10 dynes cm⁻¹. Of the refined oils, coconut oil has the lowest interfacial tension, namely 12.8 dynes cm⁻¹. All of the other refined oils have interfacial tensions between 14.5 and 22.9 dynes cm⁻¹ at 25°. The addition of unsaponifiable matter to a refined oil had little effect on its interfacial tension, but the addition of a small percentage of a crude oil to a refined oil lowered the interfacial tension of the refined oil considerably. The general conclusions of this investigation were presented in part at the 44th annual meeting of the American Society of Biological Chemists at Atlantic City, N. J. (1). This investigation was supported in part by funds from the Office of Surgeon General. One of the laboratories of the Southern Utilization Research Branch, Agricultural Research Service, U. S. Department of Agriculture.     

Enzyme-assisted acidolysis of menhaden and seal blubber oils with γ-linolenic acid

Oils containing both n−3 and n−6 fatty acids have important clinical and nutritional applications. Lipase-catalyzed acidolysis of seal blubber (SBO) and menhaden oils (MO) with γ-linolenic acid (GLA) was carried out in hexane. The process variables studied for lipase-catalyzed reaction were concentration of enzyme (100–700 units/g of oil), reaction temperature (30–60°C), reaction time (0–48 h), and mole ratio of GLA to triacylglycerols (TAG) (1∶1 to 5∶1). Two lipases chosen for acidolysis reaction were from Pseudomonas species (PS-30) and Mucor miehei. Lipase PS-30 was chosen over Mucor (also known as Rhizomucor) miehei to catalyze the acidolysis reaction owing to higher incorporation of GLA. For the acidolysis reaction, optimal conditions were a 3∶1 mole ratio of GLA to TAG, reaction temperature of 40°C, reaction time of 24 h, and an enzyme concentration of 500 units/g of oil. Under these conditions, incorporation of GLA was 37.1% for SBO and 39.6% for MO.     

[3-13C] γ-linolenic acid: A new probe for 13C nuclear magnetic resonance studies of arachidonic acid synthesis in the suckling rat

Our objective was to develop a suitable probe to study metabolism of polyunsaturated fatty acids by ¹³C nuclear magnetic resonance (NMR) in the suckling rat pup. [3-¹³C] γ-Linolenic acid was chemically synthesized, and a 20 mg (Experiment 1) or 5 mg (Experiment 2) dose was injected into the stomachs of 6–10-day-old suckling rat pups that were then killed over a 192 h (8 d) time course. ¹³C NMR showed that ¹³C in γ-linolenate peaked in liver total lipids by 12-h post-dosing and that [5-¹³C]-arachidonic acid peaked in both brain and liver total lipids 48–96 h post-dosing. ¹³C enrichment in brain γ-linolenic acid was not detected by NMR, but gas chromatography-combustion-isotope ratio mass spectrometry showed that its mass enrichment in brain phospholipids at 48–96 h post-dosing was 1–2% of that in brain arachidonic acid. ¹³C was present in liver and brain cholesterol and in perchloric acid-extractable water-soluble metabolites in the brain, liver and carcass. We conclude that low but measurable amounts of exogenous γ-linolenic acid do access the suckling rat brain in vivo. The slow time course of [5-¹³C] arachidonic acid appearance in the brain suggests most of it was probably transported there after synthesis elsewhere, probably in the liver. Some carbon from γ-linolenic acid is also incorporated into lipid products other than n−6 long-chain polyunsaturated fatty acids.     

Oxidative stability of structured lipids produced from borage (<Emphasis Type="Italic">Borago officinalis</Emphasis> L.) and evening primrose (<Emphasis Type="Italic">Oenothera biennis</Emphasis> L.) oils with docosahexaenoic acid

This study utilized γ-linolenic acid (18∶3n−6; GLA)-rich borage oil (BO) and evening primrose oil (EPO) for the synthesis of structured lipids (SL) and compared the oxidative stability of the products with those of unmodified BO and EPO as controls. Immobilized Novozym 435 lipase from Candida antarctica was used as the biocatalyst for SL production. BO or EPO eas enzymatically modified with docosahexaenoic acid (22∶6n−3; DHA), as the acyl donor, to produce SI. The SI were characterized and their oxidative stabilities evaluated. Among the oils examined, SL gave rise to higher quantities (P≤0.05) of conjugated dienes, TBARS, and headspace volatiles as compared to their unmodified counterparts. Results indicated that modified oils were less stable than their unmodified counterparts. The double bond index (DBI) and methylene bridge index (MBI) of oils decreased (P<0.05) during oxidation in the more unsaturated oils. An attempt was made to correlate various parameters of oxidation with DBI and MBI of oils; correlation coefficients (−r) were within the range of 0.574–0.973. This suggests that indicators such as DBI and MBI can reflect oxidative stability of oils.     

Analysis of triacylglycerols by silver-ion high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry

Triacylglycerols of the seed oils rich in α- and/or γ-linolenic acid moieties were separated by silver-ion high-performance liquid chromatography (HPLC) followed by on-line atmospheric pressure chemical ionization-mass spectrometric (APCI-MS) detection. Mass spectra of most triacylglycerols exhibited abundant [M + H]⁺ and [M − RCO₂]⁺ ions, which defined the molecular weight and the molecular association of fatty acyl residues of a triacylglycerol, respectively. Silver ions formed weaker complexes with triacylglycerols containing γ-linolenic acid than with those containing α-linolenic acid, i.e., the elution order of molecules wasXYT _γ>XYT _α’,XT _γ T _α>XT _α T _α>, andT _γ T _γ T _γ>T _γ T _γ T _α>T _γ T _α T _α>T _α T _α T _α, whereT _α=α-linolenic acid,T _γ=γ-linolenic acid, andX, Y=fatty acids different from linolenic acid. Furthermore, silver-ion HPLC resulted in partial separation within equally unsaturated triacylglycerols according to differences in the combined number of acyl carbons. Regioisomeric forms of triacylglycerols were not determined from the seed oil samples, although differences were measured with reference compounds in the relative abundances of [M − RCO₂]⁺ ions formed by a loss of a fatty acyl residue from thesn-2 position and thesn-1/3 positions. Silverion HPLC/APCI-MS provided valuable information for structure elucidation of seed oil triacylglycerols: 43 molecular species were identified from cloudberry seed oil, 39 from evening primrose oil, 79 from borage oil, 44 from alpine currant, and 56 from black currant seed oils. The quantitation requires to be studied further, especially in those cases where several molecular weight species of triacylglycerols eluted in a single chromatographic peak.     

Characterization of γ-linolenic acid inRibes seed

The total lipid content of fruit seeds of theRibes family ranges by weight from 18.3% in gooseberries (Ribes uva Crispa) to 30.5% in black currants (Ribes nigrum). Isolation procedures and analytical methods (gas chromatography, mass spectrometry, high performance thin layer chromatography and stereospecific analysis) demonstrate that the oils fromRibes seeds contain up to 19% by weight of γ-linolenic acid (γ-LA, C18∶3, n−6) in black currant oil. This lastRibes species thus constitutes one of the richest natural sources in γ-LA yet described. These oils appear promising for critically ill patients who seem unable to convert linoleic acid into subsequent EFA fractions.     

γ-Linolenic and stearidonic acids in Mongolian Boraginaceae

Seeds of nine Central Asian species of Boraginaceae were investigated for the first time for their oil content and for the fatty acid composition of their seed oils by capillary gas chromatography. Levels of γ-linolenic acid ranged from 6.6 to 13.0% and levels of stearidonic acid ranged from 2.4 to 21.4% of total seed fatty acids. The seed oil ofHackelia deflexa exhibited the highest stearidonic acid content (21.4%) that has been found so far in nature. Other high contents of this fatty acid were in threeLappula species (17.2 to 18.1%). Seed oils ofCynoglossum divaricatum andAmblynotus rupestris contain considerable amounts ofcis-11-eicosenoic (5.3 to 5.8%) andcis-13-docosenoic acid (7.0 to 9.7%) besides γ-linolenic (10.2 to 13.0%) and stearidonic acid (2.4 to 6.5%), which distinguish these oils from those of other Boraginaceae genera. This paper was presented as a poster at 10th Minisymposium and Workshop on Plant Lipids, Sept. 3–6, 1995, in Berne, Switzerland.     

Effect of roasting temperature and time on the chemical composition of rice germ oil

Compositional changes of rice germ oils prepared at different roasting temperatures (160–180°C) and times (5–15 min) from rice germ were evaluated and compared with those of unroasted rice germ oil. The color development and phosphorus content of oils increased significantly as roasting temperature and time increased, whereas the FA compositions of rice germ oils did not change with roasting temperature and time. Four phospholipid classes, i.e., PE, PI, PA and PC, were identified. PE had the lowest stability under roasting conditions. There were no significant differences in γ-oryzanol levels of rice germ oils prepared at different roasting temperatures and times. Four tocopherol isomers (α−, β−, γ−, and δ-tocopherol) and three tocotrienol isomers (α−, γ−, and δ-tocotrienol) were identified, but no β-tocotrienol was detectable. The content of α− and γ−tocopherol in rice germ oil gradually increased as roasting temperature and time increased.     

Purification and characterization of thermophilic and alkalophilic tributyrin esterase fromBacillus strain A30-1 (ATCC 53841)

An extracellular esterase (EC 3.1.1.1) from a thermophilicBacillus A30-1 (ATCC 53841) was purified 139-fold to homogeneity by sodium chloride (6 M) treatment, ammonium sulfate fractionation (30–80%) and phenyl-Sepharose CL-6B column chromatography. The native enzyme was a single polypeptide chain with a molecular weight of about 65,000 and an isoelectric point at pH 4.8. The optimum pH for esterase activity was 9.0, and its pH stability range was 5.0–10.5. The optimum temperature for its activity was 60°C. The esterase had a half-life of 28 h at 50°C, 20 h at 60°C and 16 h at 65°C. It showed the highest activity on tributyrin, with little or no activity toward long-chain (12–20 carbon) fatty acid esters. The enzyme displayed K_m and K_cat values of 0.357 mM and 8365/min, respectively, for tributyrin hydrolysis at pH 9.0 and 60°C. Cyclodextrin (α, β, and γ), Ca²⁺, Co²⁺, Mg²⁺ and Mn²⁺ enhanced the esterase activity, and Zn²⁺ and Fe²⁺ acted as inhibitors of the enzyme activity. The enzyme activity was not affected by ethylenediaminetetraacetic acid, p-chloromercuribenzoate andN-bromosuccinimide. This paper was presented in part at the 82nd Annual Meeting and Exposition of the American Oil Chemists’ Society, held May 12–15, 1991, in Chicago, Illinois.     

Some Biochemical Properties of Lipase from Bay Laurel (<Emphasis Type="Italic">Laurus nobilis</Emphasis> L.) Seeds

Lipase was isolated from bay laurel (Laurus nobilis L.) seeds, some biochemical properties were determined. The bay laurel oil was used as the substrate in all experiments. The pH optimum was found to be 8.0 in the presence of this substrate. The temperature optimum was 50 °C. The specific activity of the lipase was found to be 296 U mg protein⁻¹ in optimal conditions. The enzyme activity is quite stable in the range of pH 7.0–10. The enzyme was stable for 1 h at its optimum temperature, and retained about 68% of activity at 60 °C during this time. K _m and V _max values were determined as 0.975 g and 1.298 U mg protein⁻¹, respectively. Also, storage stability and metal effect on lipolytic activity were investigated. Enzyme activity was maintained for 9, 12, and 42 days at room temperature, 4 and −20 °C, respectively. Ca²⁺, Co²⁺, Cu²⁺, Fe²⁺, and Mg²⁺ lightly enhanced bay laurel lipase activity.     

Chemical Composition and Oxidative Stability of Kernel Oils from Two Current Subspecies of Pistacia atlantica in Iran

Pistacia atlantica subsp. mutica (PAM) and kurdica (PAK) kernel oils showed significantly lower unsaturated to saturated fatty acid ratios (6.39, 6.33, respectively) and calculated oxidizability (Cox) values (3.99, 4.13, respectively) than those of the P. vera L. cv. Ohadi (PVO) kernel oil (8.91, 4.41) samples. The highest peroxide value was observed for the PAK oil (4.07 mequiv kg⁻¹) (PAM, 1.94; PVO, 0.37) samples. Iodine values for the PAM, PAK, and PVO oils were 104.26, 104.77, and 110.66, respectively. The saponification number of the PVO oil was significantly greater than the PAM and PAK oils, which were statistically not different. The unsaponifiable contents, which were composed mainly of sterols, ranged from 5.63 to 6.14%. Statistically the total tocopherols contents of the PAM (818.58 mg α-tocopherol kg⁻¹) and PVO (815.90 mg α-tocopherol kg⁻¹) oils were significantly higher than that of the PAK oil (499.91 mg α-tocopherol kg⁻¹). Total phenolics contents differed significantly, the greatest concentration was for the PAM oil (81.12 mg gallic acid kg⁻¹), followed by the PVO (62.84 mg gallic acid kg⁻¹) and PAK (56.51 mg gallic acid kg⁻¹) oil samples. The wax contents of the oil samples were statistically in the same range, namely 5.67–6.48%. Oxidative stability data indicated that the PAM oil is the most resistant to the formation of lipid oxidation products, followed by the PAK and PVO oil samples.     

Studies on the radical polymerization of N-vinyl 2-pyrrolidone initiated by diphenyl ditelluride

N-vinyl pyrrolidone (NVP) was polymerized in dioxan at 60 ± 0.1°C for 1 h using diphenyl ditelluride as radical initiator. The system follows ideal kinetics i.e. R _p α [DPDT]^0.5[NVP]. The activation energy and dissociation constant is computed as 46 kJ mol⁻¹ and 1.1 × 10⁻¹¹ s⁻¹, respectively. The polymer was characterized with the help of FTIR, ¹H-NMR, ¹³C-NMR, ESR spectroscopy. The FT-IR spectrum showed bands at 1660–1680 cm⁻¹ due to combination of >C = O and C–N stretching. The gyromagnetic constant ‘g’ has been computed as 2.2203. The main product of this reaction were poly(N-vinylpyrrolidone)s with phenyl tellanyl ends. The presence of tellurium in polymer is confirmed by ICP analysis. The DSC shows the T _g of poly(N-vinylpyrrolidone) is 168°C due to rigid pyrrolidane group. The TGA showed that polymer was stable up to 380°C.The GPC studies showed that the weight average molecular weight decreases with increase of [DPDT].     

Properties and catalytic mechanism of γ-glutamyltranspeptidase from B.subtilis NX-2

Since γ-glutamyltranspeptidase (GGT) especially catalyses the transfer of the γ-glutamyl moiety to a variety of amino acids and short peptides, GGT has important practical value for enzymatic synthesis of γ-glutamyl compounds. In this paper, the GGT produced from Bacillus subtilis NX-2 was purified by a combination of ammonium sulfate fractionation and ion exchange chromatography, and the properties of purified GGT were investigated. At the conditions of pH 10.0, D-glutamine (D-Gln)/L-tryptophan (L-Trp) with a molar ratio of 5: 7, a temperature 40°C and a reaction time of 4 h, a higher conversion rate of 42% was obtained. According to the time course, the catalytic mechanism of enzymatic synthesis of γ-D-glutamyl-L-tryptophan (γ-D-Gln-L-Trp) was discussed. It was demonstrated that the GGT can catalyze not only the reaction of transpeptidation, but also the irreversible hydrolysis of the products which results in the decrease of the yield of the products. The affinity parameter of GGT to D-Gln (Km) was 5.08 mmol·L⁻¹ and the maximum reaction rate of transpeptidation (r _max) was determined as 0.034 mmol·min⁻¹·L⁻¹, while the affinity parameter of GGT to γ-D-Gln-L-Trp (K’_m) was 2.267 mmol·L⁻¹, and the maximum reaction rate of hydrolysis (r’_max) was 0.012 mmol·min⁻¹·L⁻¹. __________ Translated from Journal of Chemical Engineering of Chinese Universities, 2008, 22(2): 288–293 [译自: 高校化学工程学报]     

Physico-Chemical Characteristics of Citrus Seeds and Seed Oils from Pakistan

The physico-chemical characteristics of the seeds and seed oils of four citrus species, Mitha (Citrus limetta), Grapefruit (Citrus paradisi), Mussami (Citrus sinensis), and Kinnow (Citrus reticulata) were investigated. The hexane-extracted oil content of citrus seeds ranged from 27.0 to 36.5%. The protein, fiber and ash contents were found to be 3.9–9.6%, 5.0–8.5%, and 4.6–5.6%, respectively. The extracted oils exhibited an iodine value of 99.9–110.0; refractive index (40 °C), 1.4639–1.4670; density (24 °C), 0.920–0.941 mg/mL; saponification value, 180.9–198.9; unsaponifiable matter, 0.3–0.5%; acid value (mg KOH/g of oil), 0.5–2.2 and color (1-in. cell) 1.4–3.0R + 15.0–30.0Y. The oils revealed a good oxidative stability as indicated by the determinations of specific extinctions at 232 and 270 nm (2.3–4.4 and 0.6–0.9, respectively), p-anisidine value (2.2–3.2) and peroxide value (1.6–2.4 mequiv/kg of oil). The citrus seed oils mainly consisted of linoleic acid (36.1–39.8%). Other prominent fatty acids were palmitic acid (25.8–32.2%), oleic acid (21.9–24.1%), linolenic acid (3.4–4.4%), and stearic acid (2.8–4.4%). The contents of tocopherols (α, γ, and δ) in the oil were 26.4–557.8, 27.7–84.1, and 9.1–20.0 mg/kg, respectively. The results of the present study demonstrated that the seeds of citrus species investigated are a potential source of valuable oil which might be utilized for edible and other industrial applications.     

Hydrotreating of Heavy Gas Oil Derived from Athabasca Bitumen Over Co–Mo/γ-Al2O3 Catalyst Prepared by Sonochemical Method

Co–Mo/γ-Al₂O₃ oxide containing 9.8 wt% Mo and 2.9 wt% Co was prepared by high-intensity ultrasonic irradiation of Mo(CO)₆, Co₂(CO)₈, and γ-Al₂O₃ in decahydronapthalene under air flow. The oxidic Co–Mo catalyst thus formed was characterized by elemental analysis, BET N₂ adsorption and XRD. The surface sites on the sulfided Co–Mo/γ-Al₂O₃ catalyst were characterized by infrared spectroscopy of CO adsorption. Hydrodenitrogenation (HDN) and hydrodesulfurization (HDS) activities were evaluated for heavy gas oil derived from Athabasca bitumen in a trickle bed reaction system using the following conditions: temperatures ranging from 370 to 400 °C, a pressure of 8.8 MPa, a liquid hourly space velocity of 1 h⁻¹, and a H₂/feed ratio of 600 ml/ml. The dispersion, nature of active sites and hydrotreating activity of this catalyst were compared with the conventionally prepared Co–Mo/γ-Al₂O₃ catalyst containing similar wt% of Mo and Co. The Co–Mo catalyst prepared by sonochemical method has higher HDN and HDS rate constants than the conventional catalyst due to an improved dispersion of MoS₂.