High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

Color Tuning in Benzo[1,2,5]thiadiazole‐Based Small Molecules by Amino Conjugation/Deconjugation: Bright Red‐Light‐Emitting Diodes

Bipolar compounds (referred to in general as btza ) containing a benzo[1,2,5]thiadiazole core and peripheral diarylamines and/or 4‐tert‐butylphenyl moieties have been synthesized via palladium‐catalyzed cross‐coupling reactions of 4,7‐dibromobenzo[1,2,5]thiadiazole with appropriate stannyl compounds. These compounds are fluorescent and the emission color ranges from green to red. The fluorescence of the compounds originates from a charge‐transfer process and exhibits solvatochromism. These red‐light‐emitting materials are amorphous and devices of different configurations were fabricated: I) ITO/ btza /TPBI/Mg:Ag; II) ITO/ btza /Alq₃/Mg:Ag; III) ITO/ btza /Mg:Ag (where ITO = indium tin oxide, TPBI = 1,3,5‐tris(N‐phenylbezimidazol‐2‐yl)benzene, and Alq₃ = tris(8‐hydroxyquinoline)aluminum). The performance of some of the red‐light‐emitting devices appears to be very promising.     

High‐Purity‐Blue and High‐Efficiency Electroluminescent Devices Based on Anthracene

Novel blue‐light‐emitting materials, 9,10‐bis(1,2‐diphenyl styryl)anthracene (BDSA) and 9,10‐bis(4′‐triphenylsilylphenyl)anthracene (BTSA), which are composed of an anthracene molecule as the main unit and a rigid and bulky 1,2‐diphenylstyryl or triphenylsilylphenyl side unit, have been designed and synthesized. Theoretical calculations on the three‐dimensional structures of BDSA and BTSA show that they have a non‐coplanar structure and inhibited intermolecular interactions, resulting in a high luminescence efficiency and good color purity. By incorporating these new, non‐doped, blue‐light‐emitting materials into a multilayer device structure, it is possible to achieve luminance efficiencies of 1.43 lm W^–1 (3.0 cd A^–1 at 6.6 V) for BDSA and 0.61 lm W^–1 (1.3 cd A^–1 at 6.7 V) for BTSA at 10 mA cm^–2. The electroluminescence spectrum of the indium tin oxide (ITO)/copper phthalocyanine (CuPc)/1,4‐bis[(1‐naphthylphenyl)‐amino]biphenyl (α‐NPD)/BDSA/tris(9‐hydroxyquinolinato)aluminum (Alq₃)/LiF/Al device shows a narrow emission band with a full width at half maximum (FWHM) of 55 nm and a λ_max = 453 nm. The FWHM of the ITO/CuPc/α‐NPD/BTSA/Alq₃/LiF/Al device is 53 nm, with a λ_max = 436 nm. Regarding color, the devices showed highly pure blue emission ((x,y) = (0.15,0.09) for BTSA, (x,y) = (0.14,0.10) for BDSA) at 10 mA cm^–2 in Commission Internationale de l'Eclairage (CIE) chromaticity coordinates.     

Molecular Engineering of Blue Fluorescent Molecules Based on Silicon End‐Capped Diphenylaminofluorene Derivatives for Efficient Organic Light‐Emitting Materials

Blue fluorescent materials based on silicone end‐capped 2‐diphenylaminofluorene derivatives are synthesized and characterized. These materials are doped into a 2‐methyl‐9,10‐di‐[2‐naphthyl]anthracene host as blue dopant materials in the emitting layer of organic light‐emitting diode devices bearing a structure of ITO/DNTPD (60 nm)/NPB (30 nm)/emitting layer (30 nm)/Alq₃ (20 nm)/LiF (1.0 nm)/Al (200 nm). All devices exhibit highly efficient blue electroluminescence with high external quantum efficiencies (3.47%–7.34% at 20 mA cm^?2). The best luminous efficiency of 11.2 cd A^?1 and highest quantum efficiency of 7.34% at 20 mA cm^?2 are obtained in a device with CIE coordinates (0.15, 0.25). A deep‐blue OLED with CIE coordinates (0.15, 0.14) exhibits a luminous efficiency of 3.70 cd A^?1 and quantum efficiency of 3.47% at 20 mA cm^?2.     

Red Phosphorescent Iridium Complex Containing Carbazole‐Functionalized β‐Diketonate for Highly Efficient Nondoped Organic Light‐Emitting Diodes

A novel red phosphorescent iridium complex containing a carbazole‐functionalized β‐diketonate, Ir(DBQ)₂(CBDK) (bis(dibenzo[f,h]quinoxalinato‐N,C²) iridium (1‐(carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐diketonate)) is designed, synthesized, and characterized. The electrophosphorescence properties of a nondoped device using the title complex as an emitter with a device configuration of indium tin oxide (ITO)/N,N′‐diphenyl‐N,N′‐bis(1‐naphthyl)‐1,1′‐diphenyl‐4,4′‐diamine (NPB; 20 nm)/iridium complex (20 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 5 nm)/tris(8‐hydroxyquinoline) (AlQ; 30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) are examined. The results show that the nondoped device achieves a maximum lumen efficiency as high as 3.49 lm W^–1. To understand this excellent result observed, two reference complexes Ir(DBQ)₂(acac), where acac is the acetyl acetonate anion, and Ir(DBQ)₂(FBDK), [bis(dibenzo[f,h]quinoxalinato‐N,C²) iridium (1‐(9‐methyl‐fluoren‐9‐yl)‐6,6‐dimethylheptane‐3,5‐diketonate)], have also been synthesized, and as emitters they were examined under the same device configuration. The maximum lumen efficiency of the former compound is found to be 0.26 lm W^–1 while that for the latter is 0.37 lm W^–1, suggesting that the excellent performance of Ir(DBQ)₂(CBDK) can be attributed mainly to an improved hole‐transporting property that benefits the exciton transport. In addition, a bulky diketonate group separates the emitter centers from each other, which is also important for organic light‐emitting diodes.     

MoO3修饰氧化石墨烯作为空穴注入层影响研究

研究了MoO₃修饰氧化石墨烯(GO)作为空穴注入层的影响。采用旋涂的方法制备了GO, 再真空蒸镀修饰层MoO₃,得到了空穴注入能力强和透过率高的复合薄膜。MoO₃的厚分 别采用0、3、5和8nm。通过优化MoO₃的厚度发现,当MoO₃的厚为5nm时,复合薄膜 的透过率达到最大值,在 550nm的光波长下透光率为88%,且此时采用 复合薄膜作为空穴注入层制备的结构为 ITO/GO/MoO₃(5nm)/NPB(40nm)/Alq₃(40nm)/LiF(1nm)/Al(100nm)的有机电致发光器件(OLED)性能 最佳。通过对OLED进一步的优化,改变Alq₃的厚度,分别取50、60和70nm,测量其电压 、电流、亮度、色坐标和电致发光(EL)光谱等参数发现,当Alq₃的厚为50nm时器件性能最 佳。最终制备了结构为ITO/GO/MoO₃(5nm)/NPB(50nm)/Alq₃(50nm)/LiF(1nm)/Al(100 nm)的OLED,在电压为10V时,最大电流效率达到5.87cd/A,与GO单独作为空穴注入层制备的器件相比,提高了50%。     

Improved property in organic light-emitting diode utilizing two Al/Alq3 layers

We reported on the fabrication of organic light-emitting devices (OLEDs) utilizing the two Al/Alq₃ layers and two electrodes. This novel green device with structure of Al(110 nm)/tris(8-hydroxyquinoline) aluminum (Alq₃)(65 nm)/Al(110 nm)/Alq₃(50 nm)/N,N′-dipheny1-N, N′-bis-(3-methy1phyeny1)-1, 1′-bipheny1-4, 4′-diamine (TPD)(60 nm)/ITO(60 nm)/Glass. TPD were used as holes transporting layer (HTL), and Alq₃ was used as electron transporting layer (ETL), at the same time, Alq₃ was also used as emitting layer (EL), Al and ITO were used as cathode and anode, respectively. The results showed that the device containing the two Al/Alq₃ layers and two electrodes had a higher brightness and electroluminescent efficiency than the device without this layer. At current density of 14 mA/cm², the brightness of the device with the two Al/Alq₃ layers reach 3693 cd/m², which is higher than the 2537 cd/m² of the Al/Alq₃/TPD:Alq₃/ITO/Glass device and the 1504.0 cd/m² of the Al/Alq₃/TPD/ITO/Glass. Turn-on voltage of the device with two Al/Alq₃ layers was 7 V, which is lower than the others.     

Blade coating of Tris(8-hydroxyquinolinato)aluminum as the electron-transport layer for all-solution blue fluorescent organic light-emitting diodes

Organic light-emitting diodes (OLEDs) with a low driving voltage and efficient blue fluorescence were fabricated through blade coating. Tris(8-hydroxyquinolinato)aluminum (Alq₃) is a relatively stable electron-transporting material commonly used in evaporation. However, depositing Alq₃ through a solution process is difficult because of its extremely low solubility organic solvents, a result of its symmetrical molecular structure. In this study, Alq₃ was successfully deposited through blade coating at a very low concentration below 0.1wt%. The OLEDs contained co-dopants BUBD-1 and p-bis(p-N,N-diphenyl-aminostyryl)benzene (DSA-Ph), and a high-band-gap host 2-methyl-9,10-bis(naphthalen-2-yl)anthracene (MADN) as the emission layer with the following structure: ITO/PEDOT:PSS (40 nm)/VB-FNPD (30 nm)/MADN:2% BUBD-1:1% DSA-Ph (50 nm)/TPBI (30 nm)/LiF (0.8 nm)/Al (100 nm)or ITO/PEDOT:PSS (40 nm)/VB-FNPD (30 nm)/MADN:3% BUBD-1 (50 nm)tris(8-hydroxyquinolinato)aluminum (Alq₃; 10 nm)/LiF (0.8 nm)/Al (100 nm). 2,7-disubstituted fluorene-based triaryldiamine(VB-FNPD)is the cross-linking transporting material. The device exhibited a peak current efficiency of 5.67 cd/A for Alq₃ and 5.76 cd/A for TPBI. The device with Alq₃ has operated lifetime seven times higher than the device with TPBI.     

A Pyridine‐Containing Anthracene Derivative with High Electron and Hole Mobilities for Highly Efficient and Stable Fluorescent Organic Light‐Emitting Diodes

A pyridine‐containing anthracene derivative, 9,10‐bis(3‐(pyridin‐3‐yl)phenyl)anthracene (DPyPA), which comprehensively outperforms the widely used electron‐transport material (ETM), tris(8‐quinolinolato) aluminum (Alq₃), is synthesized. DPyPA exhibits ambipolar transport properties, with both electron and hole mobilities of around 10^?3 cm^?2 V^?1 s^?1; about two orders of magnitude higher than that of Alq₃. The nitrogen atom in the pyridine ring of DPyPA coordinates to lithium cations, which leads to efficient electron injection when LiF/Al is used as the cathode. Electrochemical measurements demonstrate that both the cations and anions of DPyPA are stable, which may improve the stability of devices based on DPyPA. Red‐emitting, green‐emitting, and blue‐emitting fluorescent organic light emitting diodes with DPyPA as the ETM display lower turn‐on voltages, higher efficiencies, and stronger luminance than the devices with Alq₃ as the ETM. The power efficiencies of the devices based on DPyPA are greater by 80–140% relative to those of the Alq₃‐based devices. The improved performance of these devices is attributed to the increased carrier balance. In addition, the device employing DPyPA as the ETM possesses excellent stability: the half‐life of the DPyPA‐based device is 67 000 h—seven times longer than that of the Alq₃‐based device—for an initial luminance of 5000 cd m^?2.     

Effect of Al:Ag alloy cathode on the performance of transparent organic light-emitting devices

Transparent organic light-emitting devices (TOLEDs) based on a stacked alloy cathode of LiF/Al:Ag are investigated. The devices have a structure of indium-tin-oxide (ITO)/4,4′,4′′-Tris[2-naphthyl(phenyl)amino]triphenylamine (2T-NATA) (25 nm)/N,N''-Di-[(1-naphthyl)-N,N''-diphenyl]-1,1''-biphenyl-4,4''-diamine (NPB) (40 nm)/tris-(8-hydroxyquinoline) aluminum (Alq3) (50 nm)/LiF (1 nm)/Al:Ag (1:3) (x), where the thicknesses of cathode metal layers (Al:Ag) are adjusted, respectively, from 70 nm to 100 nm. In the experiment, it is found that the LiF (1 nm)/Al:Ag (1:3) (75 nm) has good electron injection efficiency. Compared with an Al-only cathode, the turn-on voltage is lowered. At the voltage of 10 V, the luminances for bottom emission from ITO anode side and top emission from metal cathode side are 2 459 cd/m2 and 1 729 cd/m2, respectively. Thanks to electron injection enhancement by using Al:Ag cathode, we can obtain a better energy level matching between the cathode and the organic layer, thus the devices have lower turn-on voltage and higher luminance. The total transmittance of the devices can achieve about 40% at the wavelength of 550 nm.     

A DCM‐Type Red‐Fluorescent Dopant for High‐Performance Organic Electroluminescent Devices

2‐(2‐tert‐Butyl‐6‐((E)‐2‐(2,6,6‐trimethyl‐2,4,5,6‐tetrahydro‐1H‐pyrrolo[3,2,1‐ij]quinolin‐8‐yl)vinyl)‐4H‐pyran‐4‐ylidene)malononitrile (DCQTB) is designed and synthesized in high yield for application as the red‐light‐emitting dopant in organic light‐emitting diodes (OLEDs). Compared with 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7,‐tetramethyljulolidyl‐9‐enyl)‐4H‐pyran (DCJTB), one of the most efficient red‐emitting dopants, DCQTB exhibits red‐shifted fluorescence but blue‐shifted absorption. The unique characteristics of DCQTB with respect to DCJTB are utilized to achieve a red OLED with improved color purity and luminous efficiency. As a result, the device that uses DCQTB as dopant, with the configuration: indium tin oxide (ITO)/N,N′‐bis(1‐naphthyl)‐N,N′‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine (NPB; 60 nm)/tris(8‐quinolinolato) aluminum (Alq₃):dopant (2.3 wt %) (7 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 12 nm)/Alq₃(45 nm)/LiF(0.3 nm):Al (300 nm), shows a larger maximum luminance (L_max = 6021 cd m^–2 at 17 V), higher maximum efficiency (η_max = 4.41 cd A^–1 at 11.5 V (235.5 cd m^–2)), and better chromaticity coordinates (Commission Internationale de l'Eclairage, CIE, (x,y) = (0.65,0.35)) than a DCJTB‐based device with the same structure (L_max = 3453 cd m^–2 at 15.5 V, η_max = 3.01 cd A^–1 at 10 V (17.69 cd m^–2), and CIE (x,y) = (0.62,0.38)). The possible reasons for the red‐shifted emission but blue‐shifted absorption of DCQTB relative to DCJTB are also discussed.     

Pure‐Red Dye for Organic Electroluminescent Devices: Bis‐Condensed DCM Derivatives

In this paper, the bis‐condensed 4‐(dicyanomethylene)‐2‐methyl‐6‐[p‐(dimethylamino)styryl]‐4H‐pyran ( DCM) derivatives are introduced as a new class of red dye for organic light‐emitting devices (OLEDs). They showed more red‐shifted emission than the mono‐substituted DCM derivatives and the emission maxima increased as the electron‐donating ability of the aromatic donor group increased. On the basis of these results, red light‐emitting devices were fabricated with bis‐condensed DCM derivatives as red dopants. For a device of configuration ITO/TPD/Alq₃ + DADB (5.2 wt.‐%)/Alq₃/Al (where ITO is indium tin oxide, TPD is N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine, Alq₃ is tris(8‐hydroxyquinoline) aluminum, and DADB is [2,6‐bis[2‐[5‐(dibutylamino)phenyl]vinyl]‐4H‐pyran‐4‐ylidene]propanedinitrile), pure red emission was observed with Commission Internationale de l’Eclairage (CIE 1931) coordinates of (0.658, 0.337) at 25 mA/cm².     

利用石墨烯掺杂在NPB中的OLED性能研究

采用NPB掺杂石墨烯作为空穴传输层,制备有机电致发光器件(OLED),器件结构为ITO/NPB:Graphene(20wt.%)(50nm)/Alq3(80nm)/LiF(0.5nm)/Al(120nm)。将其与标准器件ITO/NPB(50nm)/Alq3(80nm)/LiF(0.5nm)/Al(120nm)作性能比较,研究石墨烯对OLED性能的影响。结果表明,在NPB中掺杂石墨烯薄层的器件,在同等条件下性能最佳,当电流密度为90mA/cm2时器件电流效率达到最大值3.40cd/A,与标准器件最高效率相比增大1.49倍;亮度在15V时达到最大值10 070cd/m2,比标准器件最大亮度增大5.16倍。     

Unexpected Propeller‐Like Hexakis(fluoren‐2‐yl)benzene Cores for Six‐Arm Star‐Shaped Oligofluorenes: Highly Efficient Deep‐Blue Fluorescent Emitters and Good Hole‐Transporting Materials

Grafting six fluorene units to a benzene ring generates a new highly twisted core of hexakis(fluoren‐2‐yl)benzene. Based on the new core, six‐arm star‐shaped oligofluorenes from the first generation T1 to third generation T3 are constructed. Their thermal, photophysical, and electrochemical properties are studied, and the relationship between the structures and properties is discussed. Simple double‐layer electroluminescence (EL) devices using T1–T3 as non‐doped solution‐processed emitters display deep‐blue emissions with Commission Internationale de l'Eclairage (CIE) coordinates of (0.17, 0.08) for T1 , (0.16, 0.08) for T2 , and (0.16, 0.07) for T3 . These devices exhibit excellent performance, with maximum current efficiency of up to 5.4 cd A^?1, and maximum external quantum efficiency of up to 6.8%, which is the highest efficiency for non‐doped solution‐processed deep‐blue organic light‐emitting diodes (OLEDs) based on starburst oligofluorenes, and is even comparable with other solution‐processed deep‐blue fluorescent OLEDs. Furthermore, T2‐ and T3‐ based devices show striking blue EL color stability independent of driving voltage. In addition, using T0–T3 as hole‐transporting materials, the devices of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS)/ T0–T3 /tris(8‐hydroxyquinolinato)aluminium (Alq₃)/LiF/Al achieve maximum current efficiencies of 5.51–6.62 cd A^?1, which are among the highest for hole‐transporting materials in identical device structure.     

Dibenzothiophene/Oxide and Quinoxaline/Pyrazine Derivatives Serving as Electron‐Transport Materials

A series of 2,8‐disubstituted dibenzothiophene and 2,8‐disubstituted dibenzothiophene‐S,S‐dioxide derivatives containing quinoxaline and pyrazine moieties are synthesized via three key steps: i) palladium‐catalyzed Sonogashira coupling reaction to form dialkynes; ii) conversion of the dialkynes to diones; and iii) condensation of the diones with diamines. Single‐crystal characterization of 2,8‐di(6,7‐dimethyl‐3‐phenyl‐2‐quinoxalinyl)‐5H‐5λ⁶‐dibenzo[b,d]thiophene‐5,5‐dione indicates a triclinic crystal structure with space group P1 and a non‐coplanar structure. These new materials are amorphous, with glass‐transition temperatures ranging from 132 to 194 °C. The compounds (Cpd) exhibit high electron mobilities and serve as effective electron‐transport materials for organic light‐emitting devices. Double‐layer devices are fabricated with the structure indium tin oxide (ITO)/Qn/Cpd/LiF/Al, where yellow‐emitting 2,3‐bis[4‐(N‐phenyl‐9‐ethyl‐3‐carbazolylamino)phenyl]quinoxaline (Qn) serves as the emitting layer. An external quantum efficiency of 1.41 %, a power efficiency of 4.94 lm W^–1, and a current efficiency of 1.62 cd A^–1 are achieved at a current density of 100 mA cm^–2.     

Multifunctional Fluorene‐Based Oligomers with Novel Spiro‐Annulated Triarylamine: Efficient,Stable Deep‐Blue Electroluminescence,Good Hole Injection,and Transporting Materials with Very High Tg

A series of fluorene‐based oligomers with novel spiro‐annulated triarylamine structures, namely DFSTPA, TFSTPA, and TFSDTC, are synthesized by a Suzuki cross‐coupling reaction. The spiro‐configuration molecular structures lead to very high glass transition temperatures (197–253 °C) and weak intermolecular interactions, and consequently the structures retain good morphological stability and high fluorescence quantum efficiencies(0.69–0.98). This molecular design simultaneously solves the spectral stability problems and hole‐injection and transport issues for fluorene‐based blue‐light‐emitting materials. Simple double‐layer electroluminescence (EL) devices with a configuration of ITO/TFSTPA (device A) or TFSDTC (device B)/ TPBI/LiF/Al, where TFSTPA and TFSDTC serve as hole‐transporting blue‐light‐emitting materials, show a deep‐blue emission with a peak around 432 nm, and CIE coordinates of (0.17, 0.12) for TFSTPA and (0.16, 0.07) for TFSDTC, respectively, which are very close to the National Television System Committee (NTSC) standard for blue (0.15, 0.07). The maximum current efficiency/external quantum efficiencies are 1.63 cd A^?1/1.6% for device A and 1.91 cd A^?1/2.7% for device B, respectively. In addition, a device with the structure ITO/DFSTPA/Alq₃/LiF/Al, where DFSTPA acts as both the hole‐injection and ‐transporting material, is shown to achieve a good performance, with a maximum luminance of 14 047 cd m^?2, and a maximum current efficiency of 5.56 cd A^?1. These values are significantly higher than those of devices based on commonly usedN,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐[1,1′‐biphenyl]‐4,4′‐diamine (NPB) as the hole‐transporting layer (11 738 cd m^?2 and 3.97 cd A^?1) under identical device conditions.     

发光性能稳定的磷光与荧光复合型白光OLED

使用荧光染料TBPe和Ir(ppy)_2acac 、R-4B两种光染料,采用蓝/红绿双发光层的结构,并结合TPBi对空穴的有效限制作用 ,制备了结构为ITO/MoO₃(X nm)/ADN:(2%)TBPe(30 nm)/CBP:Ir(ppy)_2acac(14%):R-4B(2%)(5nm)/TPBi(10 nm)/Alq₃(30nm)/LiF(1nm )/Al(100nm)的磷光与荧光复合的白光OLED,其中,MoO₃的厚 分别为0、15、20、30和40nm,通过改变MoO₃的厚度调控载流子的注入能力,使用空穴阻挡层提高光效; 通过测量其电压、电流、亮度、色坐标和电致发光(EL)光谱等参数,研究不同厚度的MoO ₃对器件发光性能的影响。结果表明,在MoO₃厚为20nm的情况下,器件的效率滚降 最为平缓。在电压分别 为8、9、10、11、12和13V时,器件的色坐标分别为 (0.31,0.33)、(0.30,0.33)、(0.29,0.33)、(0.29,0.33)、(0.29,0.33)和(0.29, 0.33),具有较高的稳定性,原因为采用 蓝/红绿双发光层结构更有利于蓝光的 出射,且使用ADN主体材料掺杂蓝色荧光染料TBPe作为蓝光发光层降低三重态-三重态 湮灭几率。 研究还发现,在电压为11V、器件的亮度为9744cd/m²和电流密度为11.50mA/cm²时,最大器件的电流效率为 7.0cd/A。     

2,7‐Carbazolenevinylene‐Based Oligomer Thin‐Film Transistors: High Mobility Through Structural Ordering

We have fabricated organic field‐effect transistors based on thin films of 2,7‐carbazole oligomeric semiconductors 1,4‐bis(vinylene‐(N‐hexyl‐2‐carbazole))phenylene (CPC), 1,4‐bis(vinylene‐(N′‐methyl‐7′‐hexyl‐2′‐carbazole))benzene (RCPCR), N‐hexyl‐2,7‐bis(vinylene‐(N‐hexyl‐2‐carbazole))carbazole (CCC), and N‐methyl‐2,7‐bis(vinylene‐(7‐hexyl‐N‐methyl‐2‐carbazole))carbazole (RCCCR). The organic semiconductors are deposited by thermal evaporation on bare and chemically modified silicon dioxide surfaces (SiO₂/Si) held at different temperatures varying from 25 to 200 °C during deposition. The resulting thin films have been characterized using UV‐vis and Fourier‐transform infrared spectroscopies, scanning electron microscopy, and X‐ray diffraction, and the observed top‐contact transistor performances have been correlated with thin‐film properties. We found that these new π‐conjugated oligomers can form highly ordered structures and reach high hole mobilities. Devices using CPC as the active semiconductor have exhibited mobilities as high as 0.3 cm² V^–1 s^–1 with on/off current ratios of up to 10⁷. These features make CPC and 2,7‐carbazolenevinylene‐based oligomers attractive candidates for device applications.     

Highly Efficient Green‐Emitting Phosphorescent Iridium Dendrimers Based on Carbazole Dendrons

Green‐emitting iridium dendrimers with rigid hole‐transporting carbazole dendrons are designed, synthesized, and investigated. With second‐generation dendrons, the photoluminescence quantum yield of the dendrimers is up to 87 % in solution and 45 % in a film. High‐quality films of the dendrimers are fabricated by spin‐coating, producing highly efficient, non‐doped electrophosphorescent organic light‐emitting diodes (OLEDs). With a device structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/neat dendrimer/1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene/LiF/Al, a maximum external quantum efficiency (EQE) of 10.3 % and a maximum luminous efficiency of 34.7 cd A^–1 are realized. By doping the dendrimers into a carbazole‐based host, the maximum EQE can be further increased to 16.6 %. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable dendrimers for OLED applications.     

Starburst DCM‐Type Red‐Light‐Emitting Materials for Electroluminescence Applications

Three new starburst DCM (4‐(dicyanomethylene)‐2‐methyl‐6‐[4‐(dimethylaminostyryl)‐4H‐pyran]) derivatives, 4,4′,4′′‐tris[2‐(4‐dicyanomethylene‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (TDCM), 4,4′,′′‐tris[2‐(4‐(1′,3′‐indandione)‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (TIN), and 4‐methoxy‐4′,4′′‐bis[2‐(4‐(1′,3′‐indandione)‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (MBIN), have been designed and synthesized for application as red‐light emitters in organic light‐emitting diodes (OLEDs). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) reveal their extremely high glass‐transition temperatures and decomposition temperatures, as well as their low tendency to crystallize. Photoluminescence and electroluminescence measurements show that they exhibit a greatly restricted concentration‐quenching effect compared to DCM1 (4‐(dicyanomethylene)‐2‐methyl‐6‐[p‐(N,N‐dimethylamino)‐styryl]‐4H‐pyran), a simple but typical DCM‐type dye, as a result of their non‐planar, three‐dimensional structures that result from their unique propeller‐like triphenylamine electron‐donating cores. The peripheral electron‐withdrawing moieties also play a key role in the restriction of concentration quenching. That is, TIN and MBIN, bearing 1,3‐indandione acceptors, emit more efficiently than TDCM and DCM1, which have dicyanomethylene as acceptors at a high doping concentration of 10 wt.‐% in poly(9‐vinylcarbazole) (PVK) film, irrespective of whether they are photoexcited or electroexcited, though their fluorescence quantum yields in dilute solutions are much lower than that of DCM1. By way of the co‐doping approach, the electroluminescence device with the configuration indium tin oxide (ITO)/PVK:MBIN(10 wt.‐%):tris(4‐(2‐phenylethynyl)‐phenyl)amine (TPA; 30 wt.‐%) (70 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 20 nm)/tris(8‐quinolinolato) aluminum (Alq₃;15 nm)/LiF (0.3 nm)/Al (150 nm) exhibits a turn‐on voltage of 5.1 V, a maximum luminance of 6971 cd m^–2, a maximum efficiency of 6.14 cd A^–1 (405 cd m^–2), and chromaticity coordinates of (0.66,0.33). The encouraging electroluminescence performance suggests potential applications of the starburst DCM red‐light emitters in OLEDs.