Inside Front Cover: Inkjet Printing of Luminescent CdTe Nanocrystal–Polymer Composites (Adv. Funct. Mater. 1/2007)

Schubert and co‐workers have performed a detailed investigation on ink‐jet printing of well‐defined dots of luminescent CdTe nanocrystals (NCs) embedded in a poly(vinyl alcohol) matrix, as reported on p. 23, and subsequently made studies of their morphology and photoluminescence. The inside cover shows a photograph of an ink‐jet‐printed combinatorial library of differently sized CdTe NCs emitting at different wavelengths, and a 3D profilometer image of an array of printed dots. Inkjet printing is used to produce well‐defined patterns of dots (with diameters of ca. 120 μm) that are composed of luminescent CdTe nanocrystals (NCs) embedded within a poly(vinylalcohol) (PVA) matrix. Addition of ethylene glycol (1–2 vol %) to the aqueous solution of CdTe NCs suppresses the well‐known ring‐formation effect in inkjet printing leading to exceptionally uniform dots. Atomic force microscopy characterization reveals that in the CdTe NC films the particle–particle interaction could be prevented using inert PVA as a matrix. Combinatorial libraries of CdTe NC–PVA composites with variable NC sizes and polymer/NC ratios are prepared using inkjet printing. These libraries are subsequently characterized using a UV/fluorescence plate reader to determine their luminescent properties. Energy transfer from green‐light‐emitting to red‐light‐emitting CdTe NCs in the composite containing green‐ (2.6 nm diameter) and red‐emitting (3.5 nm diameter) NCs are demonstrated.     

CdTe Quantum Dots/Layered Double Hydroxide Ultrathin Films with Multicolor Light Emission via Layer‐by‐Layer Assembly

Quantum dots (QDs) luminescent films have broad applications in optoelectronics, solid‐state light‐emitting diodes (LEDs), and optical devices. This work reports the fabrication of multicolor‐light‐emitting ultrathin films (UTFs) with 2D architecture based on CdTe QDs and MgAl layered double hydroxide (LDH) nanosheets via the layer‐by‐layer deposition technique. The hybrid UTFs possess periodic layered structure, which is verified by X‐ray diffraction. Tunable light emission in the red‐green region is obtained by changing the particle size of QDs (CdTe‐535 QDs and CdTe‐635 QDs with green and red emision respectively), assembly cycle number, and sequence. Moreover, energy transfer between CdTe‐535 QDs and CdTe‐635 QDs occurs based on the fluorescence resonance energy transfer (FRET), which greatly enhances the fluorescence efficiency of CdTe‐635 QDs. In addition, a theoretical study based on the Förster theory and molecular dynamics (MD) simulations demonstrates that CdTe QDs/LDH UTFs exhibit superior capability of energy transfer owing to the ordered dispersion of QDs in the 2D LDH matrix, which agrees well with the experimental results. Therefore, this provides a facile approach for the design and fabrication of inorganic‐inorganic luminescent UTFs with largely enhanced luminescence efficiency as well as stability, which can be potentially applied in multicolor optical and optoelectronic devices.     

A New Anti‐Counterfeiting Feature Relying on Invisible Luminescent Full Color Images Printed with Lanthanide‐Based Inks

Europium and terbium trisdipicolinate complexes are inkjet printed onto paper with commercially available desktop inkjet printers. Together with a commercial blue luminescent ink, the red‐emitting luminescent ink containing europium and the green‐emitting luminescent ink containing terbium are used to reproduce accurate full color images that are invisible under white light and appear under a 254 nm UV light. Such invisible luminescent images are attractive anti‐counterfeiting security features. The luminescent prints have a color range (gamut) nearly as wide as the gamut of a standard sRGB display. The gamut of the luminescent prints is determined by relying on a simple model predicting the relative spectral radiant emittances of any printed luminescent color halftone. The model is also used to establish the correspondence between the surface coverages of the printed luminescent inks and the emitted color of these luminescent halftones. The accuracy of the spectral prediction model is very good and can be rationalized by the absence of quenching when the luminescent lanthanide complexes are printed in superposition with the other luminescent materials.     

An Epoxy Photoresist Modified by Luminescent Nanocrystals for the Fabrication of 3D High‐Aspect‐Ratio Microstructures

An epoxy‐based negative‐tone photoresist, which is known as a suitable material for high‐aspect‐ratio surface micromachining, is functionalized with red‐light‐emitting CdSe@ZnS nanocrystals (NCs). The proper selection of a common solvent for the NCs and the resist is found to be critical for the efficient incorporation of the NCs in the epoxy matrix. The NC‐modified resist can be patterned by standard UV lithography down to micrometer‐scale resolution, and high‐aspect‐ratio structures have been successfully fabricated on a 100 mm scaled wafer. The “as‐fabricated”, 3D, epoxy‐based surface microstructures show the characteristic luminescent properties of the embedded NCs, as verified by fluorescence microscopy. This issue demonstrates that the NC emission properties can be conveniently conveyed into the polymer matrix without deteriorating the lithographic performance of the latter. The dimensions, the resolution, and the surface morphology of the NC‐modified‐epoxy microstructures exhibit only minor deviations with respect to that of the unmodified reference material, as examined by means of microscopic and metrologic investigations. The proposed approach of the incorporation of emitting and non‐bleachable NCs into a photoresist opens novel routes for surface patterning of integrated microsystems with inherent photonic functionality at the micro‐ and nanometer‐scale for light sensing and emitting applications.     

Cover Picture: An Epoxy Photoresist Modified by Luminescent Nanocrystals for the Fabrication of 3D High‐Aspect‐Ratio Microstructures (Adv. Funct. Mater. 13/2007)

M. Lucia Curri and co‐workers report on p. 2009 an epoxy‐based negative tone photoresist that can be functionalized with red emitting CdSe@ZnS core/shell type nanocrystals and patterned by UV lithography. The 3D high aspect ratio of the microfabricated structures proves that lithographic properties of the functional nanocomposite are retained and the nanocrystals properties conveyed into the resist. The emitting nanocomposite represents a convenient model for material functionalization expandable to nanocrystals with different properties. An epoxy‐based negative‐tone photoresist, which is known as a suitable material for high‐aspect‐ratio surface micromachining, is functionalized with red‐light‐emitting CdSe@ZnS nanocrystals (NCs). The proper selection of a common solvent for the NCs and the resist is found to be critical for the efficient incorporation of the NCs in the epoxy matrix. The NC‐modified resist can be patterned by standard UV lithography down to micrometer‐scale resolution, and high‐aspect‐ratio structures have been successfully fabricated on a 100 mm scaled wafer. The “as‐fabricated”, 3D, epoxy‐based surface microstructures show the characteristic luminescent properties of the embedded NCs, as verified by fluorescence microscopy. This issue demonstrates that the NC emission properties can be conveniently conveyed into the polymer matrix without deteriorating the lithographic performance of the latter. The dimensions, the resolution, and the surface morphology of the NC‐modified‐epoxy microstructures exhibit only minor deviations with respect to that of the unmodified reference material, as examined by means of microscopic and metrologic investigations. The proposed approach of the incorporation of emitting and non‐bleachable NCs into a photoresist opens novel routes for surface patterning of integrated microsystems with inherent photonic functionality at the micro‐ and nanometer‐scale for light sensing and emitting applications.     

Construction of White‐Light‐Emitting Silk Protein Hybrid Films by Molecular Recognized Assembly among Hierarchical Structures

The fabrication of bio‐hybrid functional films is demonstrated by applying a materials assembly technique. Based on the hierarchical structures of silk fibroin materials, functional molecular/materials, i.e., quantum dots (QDs), can be fixed to amino acid groups in silk fibroin films. It follows that white‐light‐emitting QD silk hybrid films are obtained by hydrogen bond molecular recognition to the –COO^– groups functionalized to blue luminescent ZnSe (5.2 nm) and yellow luminescent CdTe (4.1 nm) QDs in a molar ratio of 30:1 of ZnSe to CdTe QDs. Simultaneously, a systematic blue shift in the emission peak is observed from the QD solution to QDs silk fibroin films. The significant blue shift hints the appearance of the strong interaction between QDs and silk fibroins, which causes strong white‐light‐emitting uniform silk films. The molecular recognized interactions are confirmed by high resolution transmission electron microscopy, field scanning electron microscope, and attenuated total internal reflectance Fourier transform infrared spectroscopy. The QD silk films show unique advantages, including simple preparation, tunable white‐light emission, easy manipulation, and low fabrication costs, which make it a promising candidate for multicomponent optodevices.     

Highly Customizable All Solution–Processed Polymer Light Emitting Diodes with Inkjet Printed Ag and Transfer Printed Conductive Polymer Electrodes

Inkjet and transfer printing processes are combined to easily form patterned poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as top anodes of all solution–processed inverted polymer light emitting diodes (PLEDs) on rigid glass and flexible plastic substrates. An adhesive PEDOT:PSS ink is formulated and fully customizable patterns are obtained using the inkjet printing process. In order to transfer the patterned PEDOT:PSS films, adhesion properties at interfaces during multistep transfer printing processes are carefully adjusted. The transferred PEDOT:PSS film on the plastic substrates shows not only a sheet resistance of 260.6 Ω/□ and a transmittance of 92.1% at 550 nm wavelength but also excellent mechanical flexibility. The PLEDs with spin‐coated functional layers sandwiched between the transferred PEDOT:PSS top anodes and inkjet‐printed Ag bottom cathodes are fabricated. The fabricated PLEDs on the plastic substrates show a high current efficiency of 10.4 cd A^?1 and high mechanical stability. It is noted that because both Ag and PEDOT:PSS electrodes can be patterned with a high degree of freedom via the inkjet printing process, highly customizable PLEDs with various pattern sizes and shapes are demonstrated on the glass and plastic substrates. Finally, with all solution process, a 5 × 7 passive matrix PLED array is demonstrated.     

Heterogeneous Transparent Ultrathin Films with Tunable‐Color Luminescence Based on the Assembly of Photoactive Organic Molecules and Layered Double Hydroxides

Multicolor luminescent films have great potential for use in optoelectronics, solid‐state light‐emitting materials, and optical devices. This work describes a systematic investigation of the ordered assembly of two‐ (blue/green, blue/orange, red/blue, red/green) and three‐color (blue/red/green) light‐emitting ultrathin films (UTFs) by using different photofunctional anions [bis(N‐methylacridinium)@polyvinylsulfonate ion pairs and anionic derivatives of poly(p‐phenylene), poly(phenylenevinylene), and poly(thiophene)] and Mg‐Al‐layered double hydroxide nanosheets as building blocks. The rational combination of luminescent components affords precise control of the emission wavelengths and intensity, and multicolored luminescent UTFs can be precisely tailored covering most of the visible spectral region. The assembly process of the UTFs and their luminescence properties, as monitored by UV–vis absorption and fluorescence spectroscopy, resulted in a gradual change in luminescence color in the selected light‐emitting spectral region upon increasing the number of deposition cycles. X‐ray diffraction demonstrates that the UTFs are periodic layered structures involving heterogeneous superlattices associated with individual photoactive anion–LDH units. These UTFs also exhibit well‐defined multicolor polarized fluorescence with high polarization anisotropy, and the emissive color changes with polarization direction. Therefore, this work provides a way of fabricating heterogeneous UTFs with tunable‐color luminescence as well as polarized multicolor emission, which have potential applications in the areas of light displays and optoelectronic devices.     

Water‐Soluble Biocompatible Copolymer Hypromellose Grafted Chitosan Able to Load Exogenous Agents and Copper Nanoclusters with Aggregation‐Induced Emission

A water‐soluble, positively charged polymer is obtained by copolymerizing chitosan with hypromellose, and the evaluation of its biocompatibility and the capacity for the loading of exogenous agents is performed. Films based on hypromellose grafted chitosan (HGC) are employed as a matrix to fabricate composite films by dehydration‐triggered aggregation of copper nanoclusters (NCs). The resulting HGC/Cu NC films are transparent and exhibit an aggregation‐induced emission enhancement of copper NCs, with a resulting photoluminescence quantum yield of 42%. The application of these orange emitting films as color converters for fabrication of remote light‐emitting devices is demonstrated.     

Remote Biosensing with Polychromatic Optical Waveguide Using Blue Light‐Emitting Organic Nanowires Hybridized with Quantum Dots

Nanometer‐scale optical waveguides are attractive due to their potential applicability in photonic integration, optoelectronic communication, and optical sensors. Nanoscale white light‐emitting and/or polychromatic optical waveguides are desired for miniature white‐light generators in microphotonic circuits. Here, polychromatic (i.e., blue, green, and red) optical waveguiding characteristics are presented using a novel hybrid composite of highly crystalline blue light‐emitting organic nanowires (NWs) combined with blue, green, and red CdSe/ZnS quantum dots (QDs). Near white‐color waveguiding is achieved for organic NWs hybridized with green and red QDs. Light, emitted from QDs, can be transferred to the organic NW and then optically waveguided through highly packed π‐conjugated organic molecules in the NW with different decay characteristics. Remote biosensing using dye‐attached biomaterials is presented by adapting the transportation of QD‐emitted light through the organic NW.     

Core/Shell Perovskite Nanocrystals: Synthesis of Highly Efficient and Environmentally Stable FAPbBr3/CsPbBr3 for LED Applications

Lead halide perovskite nanocrystals (PeNCs) are promising materials for applications in optoelectronics. However, their environmental instability remains to be addressed to enable their advancement into industry. Here the development of a novel synthesis method is reported for monodispersed PeNCs coated with all inorganic shell of cesium lead bromide (CsPbBr₃) grown epitaxially on the surface of formamidinium lead bromide (FAPbBr₃) NCs. The formed FAPbBr₃/CsPbBr₃ NCs have photoluminescence in the visible range 460–560 nm with narrow emission linewidth (20 nm) and high optical quantum yield, photoluminescence quantum yield (PLQY) up to 93%. The core/shell perovskites have enhanced optical stability under ambient conditions (70 d) and under ultraviolet radiation (50 h). The enhanced properties are attributed to overgrowth of FAPbBr₃ with all‐inorganic CsPbBr₃ shell, which acts as a protective layer and enables effective passivation of the surface defects. The use of these green‐emitting core/shell FAPbBr₃/CsPbBr₃ NCs is demonstrated in light‐emitting diodes (LEDs) and significant enhancement of their performance is achieved compared to core only FAPbBr₃‐LEDs. The maximum current efficiency observed in core/shell NC LED is 19.75 cd A^‐1 and the external quantum efficiency of 8.1%, which are approximately four times and approximately eight times higher, respectively, compared to core‐only devices.     

Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures

In this work, a novel technique of inkjet printing e‐textiles with particle free reactive silver inks on knit structures is developed. The inkjet‐printed e‐textiles are highly conductive, with a sheet resistance of 0.09 Ω sq^‐1, by means of controlling the number of print passes, annealing process, and textile structures. It is notable that the inkjet process allows textiles to maintain its inherent properties, including stretchability, flexibility, breathability, and fabric hand after printing process. This is achieved by formation of ultrathin silver layers surrounding individual fibers. The silver layers coated on fibers range from 250 nm to 2.5 µm, maintaining the size of interstices and flexibility of fibers. The annealing process, structure of fibers, and printed layers significantly influence the electrical conductivity of the patterned structures on textiles. Outstanding electrical conductivity and durability are demonstrated by optimizing print passes, controlling textile structures, and incorporating an in situ annealing process. The electrical resistance dependence on the strain rate of the textiles is examined, showing the ability to maintain electrical conductivity to retain light‐emitting diode use, stable more than 500 consecutive strain cycles. Most importantly, inkjet‐printed e‐textiles maintain their characteristic washability, breathability, and fabric hands for applications in wearable technology.     

Highly Efficient Green Zn?Ag?In?S/Zn?In?S/ZnS QDs by a Strong Exothermic Reaction for Down‐Converted Green and Tripackage White LEDs

Highly efficient bright green‐emitting Zn? Ag? In? S (ZAIS)/Zn? In? S (ZIS)/ZnS alloy core/inner‐shell/shell quantum dots (QDs) are synthesized using a multistep hot injection method with a highly concentrated zinc acetate dihydrate precursor. ZAIS/ZIS/ZnS QD growth is realized via five sequential steps: a core growth process, a two‐step alloying–shelling process, and a two‐step shelling process. To enhance the photoluminescence quantum yield (PLQY), a ZIS inner‐shell is synthesized and added with a band gap located between the ZAIS alloy‐core and ZnS shell using a strong exothermic reaction. The synthesized ZAIS/ZIS/ZnS QDs shows a high PLQY of 87% with peak wavelength of 501 nm. Tripackage white down‐converted light‐emitting diodes (DC‐LEDs) are realized using an InGaN blue (B) LED, a green (G) ZAIS/ZIS/ZS QD‐based DC‐LED, and a red (R) Zn? Cu? In? S/ZnS QD‐based DC‐LED with correlated color temperature from 2700 to 10 000 K. The red, green, and blue tripackage white DC‐LEDs exhibit high luminous efficacy of 72 lm W^?1 and excellent color qualities (color rendering index (CRI, R _a) = 95 and the special CRI for red (R ₉) = 93) at 2700 K.     

Highly Efficient Green ZnAgInS/ZnInS/ZnS QDs by a Strong Exothermic Reaction for Down‐Converted Green and Tripackage White LEDs

Highly efficient bright green‐emitting Zn?Ag?In?S (ZAIS)/Zn?In?S (ZIS)/ZnS alloy core/inner‐shell/shell quantum dots (QDs) are synthesized using a multistep hot injection method with a highly concentrated zinc acetate dihydrate precursor. ZAIS/ZIS/ZnS QD growth is realized via five sequential steps: a core growth process, a two‐step alloying–shelling process, and a two‐step shelling process. To enhance the photoluminescence quantum yield (PLQY), a ZIS inner‐shell is synthesized and added with a band gap located between the ZAIS alloy‐core and ZnS shell using a strong exothermic reaction. The synthesized ZAIS/ZIS/ZnS QDs shows a high PLQY of 87% with peak wavelength of 501 nm. Tripackage white down‐converted light‐emitting diodes (DC‐LEDs) are realized using an InGaN blue (B) LED, a green (G) ZAIS/ZIS/ZS QD‐based DC‐LED, and a red (R) Zn?Cu?In?S/ZnS QD‐based DC‐LED with correlated color temperature from 2700 to 10 000 K. The red, green, and blue tripackage white DC‐LEDs exhibit high luminous efficacy of 72 lm W^?1 and excellent color qualities (color rendering index (CRI, R_a) = 95 and the special CRI for red (R₉) = 93) at 2700 K.     

Quantum‐Dot‐Functionalized Poly(styrene‐co‐acrylic acid) Microbeads: Step‐Wise Self‐Assembly,Characterization, and Applications for Sub‐femtomolar Electrochemical Detection of DNA Hybridization

A novel nanoparticle label capable of amplifying the electrochemical signal of DNA hybridization is fabricated by functionalizing poly(styrene‐co‐acrylic acid) microbeads with CdTe quantum dots. CdTe‐tagged polybeads are prepared by a layer‐by‐layer self‐assembly of the CdTe quantum dots (diameter = 3.07 nm) and polyelectrolyte on the polybeads (diameter = 323 nm). The self‐assembly procedure is characterized using scanning and transmission electron microscopy, and X‐ray photoelectron, infrared and photoluminescence spectroscopy. The mean quantum‐dot coverage is (9.54 ± 1.2) × 10³ per polybead. The enormous coverage and the unique properties of the quantum dots make the polybeads an effective candidate as a functionalized amplification platform for labelling of DNA or protein. Herein, as an example, the CdTe‐tagged polybeads are attached to DNA probes specific to breast cancer by streptavidin–biotin binding to construct a DNA biosensor. The detection of the DNA hybridization process is achieved by the square‐wave voltammetry of Cd²⁺ after the dissolution of the CdTe tags with HNO₃. The efficient carrier‐bead amplification platform, coupled with the highly sensitive stripping voltammetric measurement, gives rise to a detection limit of 0.52 fmol L^?1 and a dynamic range spanning 5 orders of magnitude. This proposed nanoparticle label is promising, exhibits an efficient amplification performance, and opens new opportunities for ultrasensitive detection of other biorecognition events.     

Synthesis of Highly Luminescent SnO2 Nanocrystals: Analysis of their Defect‐Related Photoluminescence Using Polyoxometalates as Quenchers

Colloidal semiconductor nanocrystals (NCs), called quantum dots (QDs), have been intensively studied because of their excellent photoluminescence (PL) quantum yields. However, commercial QDs such as CdSe and InP contain toxic or expensive rare elements, limiting their sustainable use. This study focuses on nontoxic, stable, and cheap tin oxides, and synthesized luminescent SnO₂ NCs of ≈2 nm in size by a heating‐up method. Tin precursors and diols in a high‐boiling point solvent with oleylamine as the surfactant are heated at 240 °C. SnO₂ NCs show defect‐related photoluminescence at 400–460 nm by excitation at 370 nm, achieving a high quantum yield of more than 60%. The PL intensity is stable even when the NCs are stored in atmospheric air at room temperature for over 1 year. The defect‐related emissions of the SnO₂ NCs are studied using polyoxometalates (POMs) as the PL quencher. POMs efficiently quench the PL emissions by extracting excited electrons from the conduction band and shallow surface defects. The results reveal that PL emissions from SnO₂ NCs are associated with radiative charge recombination via shallow defect levels on the surface and in the bulk, demonstrating the effectiveness of the PL quenching technique using POMs in studying the PL emission mechanism in QDs.     

Light‐Emitting Electrochemical Cells Based on Color‐Tunable Inorganic Colloidal Quantum Dots

Large‐area, ultrathin light‐emitting devices currently inspire architects and interior and automotive designers all over the world. Light‐emitting electrochemical cells (LECs) and quantum dot light‐emitting diodes (QD‐LEDs) belong to the most promising next‐generation device concepts for future flexible and large‐area lighting technologies. Both concepts incorporate solution‐based fabrication techniques, which makes them attractive for low cost applications based on, for example, roll‐to‐roll fabrication or inkjet printing. However, both concepts have unique benefits that justify their appeal. LECs comprise ionic species in the active layer, which leads to the omission of additional organic charge injection and transport layers and reactive cathode materials, thus LECs impress with their simple device architecture. QD‐LEDs impress with purity and opulence of available colors: colloidal quantum dots (QDs) are semiconducting nanocrystals that show high yield light emission, which can be easily tuned over the whole visible spectrum by material composition and size. Emerging technologies that unite the potential of both concepts (LEC and QD‐LED) are covered, either by extending a typical LEC architecture with additional QDs, or by replacing the entire organic LEC emitter with QDs or perovskite nanocrystals, still keeping the easy LEC setup featured by the incorporation of mobile ions.     

Dye Encapsulated Metal‐Organic Framework for Warm‐White LED with High Color‐Rendering Index

A strategy by encapsulating organic dyes into the pores of a luminescent metal‐organic framework (MOF) is developed to achieve white‐light‐emitting phosphor. Both the red‐light emitting dye 4‐(p‐dimethylaminostyryl)‐1‐methylpyridinium ( DSM ) and the green‐light emitting dye acriflavine ( AF ) are encapsulated into a blue‐emitting anionic MOF ZJU‐28 through an ion‐exchange process to yield the MOF?dye composite ZJU‐28?DSM/AF . The emission color of the obtained composite can be easily modulated by simply adjusting the amount and component of dyes. With careful adjustment of the relative concentration of the dyes DSM and AF , the resulting ZJU‐28?DSM/AF (0.02 wt% DSM , 0.06 wt% AF ) exhibits a broadband white emission with ideal CIE coordinates of (0.34, 0.32), high color‐rendering index value of 91, and moderate correlated color temperature value of 5327 K. Such a strategy can be easily expanded to other luminescent MOFs and dyes, thus opening a new perspective for the development of white light emitting materials.     

Triplet Energy Transfer from PbS(Se) Nanocrystals to Rubrene: the Relationship between the Upconversion Quantum Yield and Size

Photon upconversion has attracted enormous attention due to its wide range of applications in biological imaging, photocatalysis, and especially photovoltaics. Here, the effect of quantum confinement on the efficiency of Dexter energy transfer from PbS and PbSe nanocrystals (NCs) to a rubrene acceptor is studied. A series of experiments exploring the relationship between NC size and the upconversion quantum yield (QY) in this hybrid platform show that energy transfer occurs in the Marcus normal regime. By decreasing the NC diameter from 3.5 to 2.9 nm for PbS and from 3.2 to 2.5 nm for PbSe, the relative upconversion QY is enhanced about 700 and 250‐fold respectively. In addition, the dynamic Stern–Volmer constant (K_SV) for the quenching of PbSe NCs by rubrene increases approximately fivefold with a decrease in NC diameter from 3.2 to 2.5 nm to a value of 200 m ^?1. This work shows that high quality, well‐passivated, small NCs are critical for efficient triplet energy transfer to molecular acceptors.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).