Dual pH‐ and temperature‐responsive hydrogels with extraordinary swelling/deswelling behavior and enhanced mechanical performances

pH‐ and temperature‐responsive semi‐interpenetrating nanocomposite hydrogels (NC hydrogels) were prepared with surface‐functionalized graphene oxide (GO) as the crosslinker, N‐isopropylacrylamide (NIPAM) as the monomer, and chitosan (CS) as an additive. The effects of 3‐(trimethoxysilyl)propylmethacrylate‐modified GO sheets and CS content on various physical properties were investigated. Results show that PNIPAM/CS/GO hydrogels undergo a large volumetric change in response to temperature. Swelling ratios of PNIPAM/CS/GO hydrogels are much larger than those of the conventional organically crosslinked PNIPAM hydrogels. The deswelling test indicates that the deswelling rate was greatly enhanced by incorporating CS into the hydrogel network and using the surface‐functionalized GO as the crosslinker. The pH‐sensitivity of PNIPAM/CS/GO hydrogels is evident below their volume phase transition temperature. Moreover, the PNIPAM/CS/GO hydrogels have a much better mechanical property compared with traditional hydrogels even in a high water content of 90%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41530.     

Synthesis of water‐soluble thermosensitive polymers having phosphonium groups from methacryloyloxyethyl trialkyl phosphonium chlorides–N‐isopropylacrylamide copolymers and their functions

Water‐soluble thermosensitive polymers having phosphonium groups were synthesized by the copolymerization of N‐isopropylacrylamide (NIPAAm) with methacryloyloxyethyl trialkyl phosphonium chlorides (METRs) having varying alkyl lengths. The relative viscosities of the copolymer solutions increased with increasing content of phosphonium groups in the copolymers and decreased with increasing chain length of alkyl chains in the phosphonium groups. However, the copolymers of METR with octyl groups in phosphonium groups (METO) and NIPAAm became water insoluble with increasing contents of METO moieties in the copolymers. The transmittance at 660 nm of the copolymer solutions above the lower critical solution temperature (LCST) decreased gradually with increasing temperature and decreased with increasing chain length of alkyl chains in the phosphonium groups. The transmittance at 660 nm of the copolymer solutions above the LCST was greatly affected by the addition of neutral salts such as KCl. The copolymers of METR with ethyl groups in phosphonium groups and NIPAAm and those of METR with butyl groups in phosphonium groups and NIPAAm had high flocculating abilities against bacterial suspensions. The METO–NIPAAm copolymer was found to have a high antibacterial activity. The flocculating ability and the antibacterial activity of the copolymers were affected by not only the content of phosphonium groups but also the alkyl chain length in the phosphonium groups in the copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 386–393, 2003     

pH‐responsive core crosslinked polycarbonate micelles via thiol‐acrylate Michael addition reaction

A facile method for the construction of pH‐responsive core crosslinked micelles (CCLMs) based on polycarbonate was developed. Biodegradable amphiphilic block copolymer monomethoxy poly(ethylene glycol)‐b‐Poly(AC) (mPEG‐b‐poly(AC)) with pendant acrylate group was synthesized by means of ring opening polymerization of acryloyl carbonate (AC). Then CCLMs were obtained via thiol‐acrylate Michael addition reaction between the pendant acrylate group in the hydrophobic block and the crosslinker 1,6‐hexanedithiol. DLS results showed that the CCLMs prepared from mPEG‐b‐poly(AC)₂₅ were more stable than uncrosslinked micelles (UCLMs) upon dilution by 10‐fold DMF. Model drug Coumarin 102 was then encapsulated into the micelles. The pH‐responsive release of coumarin 102 from the CCLMs was demonstrated by fluorescence spectroscopy. The core crosslinked polycarbonate micelles have a potential as efficient intracellular smart drug delivery platforms. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44421.     

Star poly(2‐ethyl‐2‐oxazoline)s—synthesis and thermosensitivity

A series of star‐shaped poly(2‐ethyl‐2‐oxazoline)s was prepared by cationic polymerization. The polymerization was initiated by dipentaerythrityl hexakis(4‐nitrobenzene sulfonate) and a tosylated hyperbranched polymer of glycidol. The polymerization proceeded in a controlled manner. The star structure of the products was determined by nuclear magnetic resonance. The molar mass distributions that were measured by gel permeation chromatography with multiangle laser light scattering were narrow, and the experimental values of the molar masses were close to those predicted. The very compact structure of the polymers obtained (compared with the linear counterparts) confirmed the star formation. The star poly(2‐ethyl‐2‐oxazoline)s show a phase transition temperature in the range 62–75 °C. Comparison of this phase transition temperature with that of the linear poly(2‐ethyl‐2‐oxazoline)s with the same molar masses indicates the influence of molar mass and topological structure of the macromolecule on temperature behavior. The prepared copolymers are spherical, which might be useful for the controlled transport and release of active compounds. Copyright © 2011 Society of Chemical Industry     

Preparation and pH‐responsive performance of silane‐modified poly(methylacrylic acid)

The poly(methylacrylic acid) modified by silane [poly(methylacrylic acid‐co‐vinyl triethoxylsilane) (PMAA)] was prepared via free‐radical polymerization with different mass ratios of methylacrylic acid to vinyl triethoxylsilane (VTES). The swelling performance of the prepared PMAA in different solutions with various pH values, salt species (NaCl and CaCl₂), and concentrations was investigated in detail. The results indicated that the introduction of silane boosted the stability of the obtained PMAA in aqueous solutions in the presence of an increased quantity of VTES additive. Meanwhile, the different swelling ratios of PMAA in various pH solutions showed a high pH responsivity. In addition, we found that when the PMAA underwent a number of swelling–deswelling cycles, it demonstrated the good reversibility properties when the pH value of the swelling medium was changed from 9.0 to 1.4. Moreover, the swelling mechanism of PMAA in different solutions with different pH values was investigated. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40403.     

Temperature and pH effects on the stability and rheological behavior of the aqueous suspensions of smart polymers based on N‐isopropylacrylamide,chitosan, and acrylic acid

This study describes the stability and rheological behavior of suspensions of poly(N‐isopropylacrylamide) (PNIPAM), poly(N‐isopropylacrylamide)‐chitosan (PNIPAM‐CS), and poly(N‐isopropylacrylamide)‐chitosan‐poly(acrylic acid) (PNIPAM‐CS‐PAA) crosslinked particles sensitive to pH and temperature. These dual‐sensitive materials were simply obtained by one‐pot method, via free‐radical precipitation copolymerization with potassium persulfate, using N,N′‐methylenebisacrylamide as a crosslinking agent. Incorporation of the precursor materials into the chemical networks was confirmed by elementary analysis and infrared spectroscopy. The influence of external stimuli such as pH and temperature, or both, on particle behavior was investigated through rheological measurements, visual stability tests, and analytical centrifugation. The PNIPAM‐CS particles showed higher stability in acid and neutral media, whereas PNIPAM‐CS‐PAA particles were more stable in neutral and alkaline media, both below and above the lower critical solution temperature of PNIPAM (stability data). This is due to different interparticle interactions as well as those between the particles and the medium (also evidenced by rheological data), which were also influenced by the pH and temperature of the medium. Based on the results obtained, we found that the introduction of pH‐sensitive polymers to crosslinked PNIPAM particles not only produced dual‐sensitive materials but also allowed particle stability to be adjusted, making phase separation faster or slower, depending on the desired application. Thus, it is possible to adapt the material to different media. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of the crosslinking density and programming temperature on the shape fixity and shape recovery in epoxy–anhydride shape‐memory polymers

In addition to the fabrication of thermoset epoxy–anhydride shape‐memory polymers (SMPs), a systematic experimental investigation was conducted to characterize the crosslinking density, micromorphology, thermal properties, mechanical properties, and shape‐memory effects in the epoxy SMP system, with a focus on the influence of the crosslinking density and programming temperature on the shape‐fixity and shape‐recovery behaviors of the polymers. On the basis of the crosslinking density information determined by NMR technology, we concluded that the effect of the crosslinking density on the shape‐fixity behaviors was dependent on the programming temperature. The advantage of a nice combination of crosslinking density and programming temperature provided an effective approach to tailor the actual shape recovery within a wide range. The increasing crosslinking density significantly improved the shape‐recovery ratio, which could be further improved through a decrease in the programming, whereas the crosslinking density was more fundamental. This exploration should play an important role in the fabrication and applications of SMP materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40559.     

Thermo‐responsive albumin hydrogels with LCST near the physiological temperature

This paper deals with the synthesis of thermoresponsive microspheres with proteic structure exhibiting a transition temperature close to the body temperature. The hydrogels were synthesized by free radical polymerization of methacrylate Bovine Serum Albumin (BSA‐MA) as crosslinker, and 2‐hydroxyethyl methacrylate (HEMA) and/or N‐isopropylacrylamide (NIPAAm), as hydrophilic and thermoresponsive monomers, respectively. The modification of the hydrophilic/hydrophobic balance in the polymerization feed allows to modulate the volume phase transition temperature of the macromolecular network. The hydrogels were characterized by infrared spectroscopy and thermal analyses, which showed negative thermoresponsive behavior for all compositions and, by increasing the content of the hydrophilic moieties in the network, the transition temperature was ranged from 34.2 to 36.8°C. To test the preformed materials as drug carriers, diclofenac diethyl ammonium salt was chosen and drug entrapment percent was determined. Drug release profiles, in media at different temperature, depend on the crosslinking degree and on the composition of the hydrogels. By using semiempirical equations, the release mechanism was extensively studied and the diffusional contribute evaluated. The physic‐chemical characteristics of thermoresponsive materials confirm the applicability of the microspheres as drug delivery device. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

pH‐sensitive hydroxyethyl starch–doxorubicin conjugates as antitumor prodrugs with enhanced anticancer efficacy

Doxorubicin (DOX) is a widely used chemotherapeutic drug for the treatment of several types of cancers, which has limitation in clinical applications because of severe heart toxicity. Herein, to reduce the fast clearance from the blood system and the severe systemic toxicity caused by the nonspecific protein adsorption, a pH‐sensitive drug delivery system with higher drug conjugated content was prepared by conjugating DOX onto hydroxyethyl starch (HES) with a pH‐sensitive hydrazone bond. In normal physiological environment, the release of DOX conjugated onto HES was slight which could be neglected without any side effect. However, in an acidic environment mimicking the tumor microenvironment, this pH‐sensitive hydrazone linkage provided a controlled and sustained release of DOX over a period of more than 3 days. The conjugates had good biocompatibility, long circulation, and lower cytotoxicity, which could efficiently be transferred into HeLa and HepG2 cells and release the conjugated drug. Based on these promising properties, these HES–DOX conjugates outline the significant potential for future biomedical application in the controlled release of antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42778.     

Synthesis of thermosensitive glycopolymers containing D‐glucose residue: Copolymers with N‐isopropylacrylamide

A new glycomonomer, 3‐acrylamido‐3‐deoxy‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose, was synthesized from D ‐glucose. This monomer was homopolymerized and copolymerized with N‐isopropylacrylamide in different compositions by free‐radical polymerization. The composition of the copolymer was determined with ¹H‐NMR spectroscopy. On acid hydrolysis, water‐soluble deprotected copolymers were obtained. The protected and deprotected copolymers showed a sharp cloud‐point temperature. A linear correlation was obtained between the lower critical solution temperatures and the concentration of glycomonomer in the copolymers © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermo‐ and pH‐ responsive copolymers: Poly(n‐Isopropylacrylamide‐co‐IAM) copolymers

Poly(N‐isopropylacrylamide) (NIPAAm) is well known as a smart material with good thermal sensitivity and favorable biocompatibility. A series of new smart hydrogels, NIPAAm copolymerized with IAM (itaconamic acid; 4‐amino‐2‐methylene‐4‐oxobutanoic acid), were synthesized through radical solution polymerization in this work. Poly(NIPAAm‐co‐IAM) can respond to the changes of temperature as well as pH value. Such a characteristic is due to the fact that IAM contains not only a hydrophilic acrylic acid moiety but also an acrylamide moiety to be thermal and pH sensitive. The experimental results show that the lower critical solution temperature (LCST) of the copolymer increases as the molar fraction of IAM increases. Moreover, based on the current experimental data, 3 wt % of Poly(NIPAAm‐co‐IAM) aqueous solution in this study exhibits a phase transition temperature (37.8°C) close to the human body temperature in the buffer solution of pH 7 possibly to be useful in drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42367.     

Preparation and release behavior of temperature‐ and pH‐responsive chitosan material

BACKGROUND: Chitosan is a polymer with good biocompatibility which makes it promising for potential applications in the field of drug delivery. A novel kind of copolymer, P(CS‐Ma‐graft‐NIPAm), was synthesized with chitosan (CS), maleic anhydride (Ma) and N‐isopropylacrylamide (NIPAm) by grafting and copolymerization. RESULTS: The copolymers were characterized using Fourier transform infrared, ¹H NMR and ultraviolet spectroscopies, and the molecular weight and polydispersity were determined using gel permeation chromatography. The aqueous solution properties of the copolymer and the controlled delivery of coenzyme A from it were also studied. The results showed that the copolymer had temperature and pH sensitivities, and that the release of coenzyme A from the copolymer was dependent on the release medium, namely the concentration of the copolymer, pH and temperature. Higher concentrations of the copolymer absorbed more coenzyme A than lower ones. Increasing temperature accelerated coenzyme A release from the copolymer. Also, the pH of the solution had a significant impact on the release of coenzyme A. CONCLUSION: These results suggest that the novel copolymer could be used in drug delivery systems. Copyright © 2007 Society of Chemical Industry     

Preparation of quadruple responsive polymeric micelles combining temperature‐, pH‐, redox‐, and UV‐responsive behaviors and its application in controlled release system

A novel series of quadruple responsive copolymers, poly(ethylene glycol)‐ss‐[poly(dimethylaminoethyl methacrylate)‐co‐poly(2‐nitrobenzyl methacrylate)] [PEG‐ss‐(PDMAEMA‐co‐PNBM)], were synthesized via atom transfer radical polymerization mediated by home‐made PEG‐based macro‐initiator labeled with disulfides. The obtained copolymers could self‐assemble in aqueous solution forming micelles with the disulfide bridge linking the hydrophilic coronas (PEG) and the hydrophobic cores (PDMAEMA‐co‐PNBM). Investigation on the resulted micelles indicated that the micelles could respond to various stimuli, that is, temperature, pH, the presence of dithiothreitol (DTT), and UV irradiation. Moreover, the responsive behavior of the micelles depends on the type of stimuli, that is, temperature change causes size change of the micelles, while UV irradiation leads to dissolution of the self‐assembled structures. Such stimulus‐dependent responsive behavior could be applied in smart materials that deal with multi‐tasks or in the construction of complex logic gate. The potential application of the multi‐responsive micelles in cargo release system was also evaluated using Nile Red (NR) as model molecule. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46675.     

pH‐ and temperature‐responsive IPN hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate)

pH‐ and temperature‐responsive interpenetrating polymer network (IPN) hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate) were successfully prepared. The structure and properties of the hydrogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analyzer. The equilibrium and dynamic swelling/deswelling behaviors and the drug release properties of the hydrogels responding to pH and/or temperature were also studied in detail. The hydrogels have the porous honeycomb structures, good miscibility and thermal stability, and good pH‐ and temperature‐responsivity. The volume phase transition temperature of the hydrogels is ca. 40°C. Changing the soy protein or crosslinker content could be used to control the swelling behavior and water retention, and the hydrogels have the fastest deswelling rate in pH 1.2 buffer solutions at 45°C. Bovine serum albumin release from the hydrogels has the good pH and temperature dependence. The results show that the proposed IPN hydrogels may have potential applications in the field of biomedical materials such as in drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39781.     

Cyclopolymerization protocol for the synthesis of a poly(zwitterion‐alt‐sulfur dioxide) to investigate the polyzwitterion‐to‐poly(anion‐zwitterion) transition

The zwitterionic monomer, 3‐(N,N‐diallyl,N‐carboethoxymethylammonio)propanesulfonate, on cocyclopolymerization with sulfur dioxide in DMSO using azoisobutyronitrile as the initiator afforded the polyzwitterion (PZ) copolymer in excellent yields. The PZ on acidic hydrolysis of the ester groups led to the corresponding polyzwitterionic acid (PZA). The pH‐responsive PZA on treatment with sodium hydroxide gave the new poly(eletrolyte‐zwitterion) (PEZ). The solubility, viscosity behaviors, and solution properties of the salt‐tolerant PZ, PZA, and PEZ were studied in detail. Like common PZs, PZ was found to be insoluble in salt‐free but soluble in salt‐added water. The apparent basicity constants of the carboxyl group in PEZ have been determined. As the name implies, the PEZ possesses dual type of structural feature common to both conventional anionic polyelectrolytes and PZs, and its aqueous solution behavior is found to be similar to that observed for a typical alternating anionic‐zwitterionic copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Rheological behavior of pH‐responsive associating ionic polymers of diallyammonium salts and sulfur dioxide

In this study, the viscoelastic behavior of hydrophobically modified polyelectrolytes obtained from the hydrolysis of cationic acid salts (CAS's) as a function of their zwitterion fraction (x) and anion fraction (z) was studied. The dynamic viscosity (η′) dependence on frequency of polymer solutions of polybetaine/anionic polyelectrolyte (APE) with various compositions of x and z in 0.1N NaCl showed typical shear thinning behavior. η′ of a solution of CAS 4 (M₂‐4 (4 mol % hydrophobe)) attained a maximum value in the presence of 1.67 equiv of NaOH (corresponding to an x : z ratio of 33 : 67) and decreased with any further addition of NaOH. We suggest this maximum to be a result of a combined effect of coil expansion and hydrophobic association. The influence of the temperature and concentration on η′ of CAS 4 (M₂‐4) treated with 1.67 equiv of NaOH was also investigated. The rheology of CAS 4 (M₂‐4) samples treated with 1.67, 1.81, and 2.0 equiv of NaOH suggested a reversible network. However, for APE 7 (M₂‐5 (5 mol % hydrophobe)), elastic behavior was dominant, and the formation of highly interconnected three‐dimensional networks was suggested. At lower x : z ratios, the effect of coil expansion due to a higher APE fraction was more than counterbalanced by the lower degree of intermolecular hydrophobic associations, whereas at higher x : z ratios, coil contraction became the predominant effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of a water‐soluble sulfonates copolymer of acrylamide and N‐allylbenzamide as enhanced oil recovery chemical

A novel water‐soluble polymer was prepared by copolymerization and sulfomethylation using acrylamide (AM) and N‐allylbenzamide (NABI) as raw materials under mild conditions. The effects of ratio of AM to NABI, initiator concentration, reaction temperature, pH, and monomer concentration on the copolymerization were studied. The sulfonates copolymer was characterized by infrared (IR) spectroscopy, ¹H NMR spectroscopy, elemental analysis, and atomic force microscopy (AFM). It was found that the sulfonates copolymer could achieve up to 25%, 30% retention rate of the viscosity at a high temperature (120°C) and a vigorous shear condition (1000 s^?1). It was also found that the sulfonates copolymer had moderate salt tolerance (NaCl, CaCl₂, and MgCl₂·6H₂O) and its viscosity could be restored to the original value when the shear rate changed from 170 to 510 s^?1 and 510 to 170 s^?1. At last, the enhanced oil recovery (EOR) of the sulfonates copolymer was tested by core flood, and with up to 10.6% EOR was afforded in presence of 5000 mg/L NaCl brine at 60°C. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Photo‐cross‐linked biodegradable thermo‐ and pH‐responsive hydrogels for controlled drug release

A new strategy was developed to prepare thermo‐ and pH‐sensitive hydrogels by the crosslinking of poly(N‐isopropylacrylamide) with a biodegradable crosslinker derived from poly(L ‐glutamic acid). Hydrogels were fabricated by exposing aqueous solutions of precursor containing photoinitiator to UV light irradiation. The swelling behaviors of hydrogels at different temperatures, pHs, and ionic strengths were examined. The hydrogels shrank under acidic condition or at temperature above their collapse temperature and would swell in neutral or basic media or at lower temperature. These processes were reversible as the pH or temperature changed. All hydrogels exhibited no weight loss in the simulated gastric fluid but degraded rapidly in the simulated intestinal condition. Bovine serum albumin were used as a model protein drug and loaded into the hydrogels. The in vitro drug release experiment was carried out at different pH values and temperatures. The pH and temperature dependent release behaviors indicated the promising application of these materials as stimuli‐responsive drug delivery vehicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of pH‐responsive polyethylene terephthalate track‐etched membranes by grafting hydroxyethyl‐methacrylate using atom‐transfer radical polymerization method

pH‐responsive polyethylene terephthalate (PET) track‐etched membranes were synthesized by grafting 2‐hydroxyethyl‐methacrylate (HEMA) on the surface of the membrane via atom transfer radical polymerization. The controllability of grafting polymerization of HEMA on membrane surface is systematically investigated. The pH‐responsive characteristics of PET‐g‐poly(2‐hydroxyethyl‐methacrylate) (PHEMA) gating membranes with different grafted PHEMA chain lengths are measured by tracking the permeation of water solution with different pH values. The results show that the grafting polymerization is controllable, and the permeation of grafted membranes is affected by the grafted PHEMA chain lengths on the surface of membrane. The results also demonstrate that the grafted PET membranes exhibit reversible pH‐response permeation to environmental pH values. Desired pH‐responsive membranes are obtained by controlling the grafted PHEMA chain lengths via atom transfer radical polymerization method. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40912.     

EDTA and pH‐sensitive crosslinking polymerization of acrylic acid, 2‐acrylamidoglycolic acid,and 2‐acrylamide‐2‐methyl‐1‐propanesulfonic acid

Network formation was monitored by shear storage modulus (G′) during free radical crosslinking polymerization to investigate the effects of pH and ethylenediaminetetraacetic acid (EDTA; a complex agent). Three types of acrylic monomers, acrylic acid (AAc), 2‐acrylamidoglycolic acid (AmGc), and 2‐acrylamido‐2‐methyl propanesulfonic acid (AmPS), were polymerized in the presence of a crosslinking agent. The ratio of crosslinking agent (methylene bis‐acrylamide; MBAAm) to monomer was varied as: 0.583 × 10^?3, 1.169 × 10^?3, 1.753 × 10^?3, and 2.338 × 10^?3. G′ of the hydrogel in crosslinking polymerizations of AAc and AmPS was effectively increased by addition of EDTA, which was not the case for the crosslinking polymerization of AmGc. The order of magnitude of G′ differed based on the acidity of monomer. The maximum values of G′ in crosslinking polymerizations of AAc, AmGc, and AmPS were ～20,000 Pa, 6000 Pa, and 400 Pa, respectively. G′ varied linearly with the molecular weight between crosslinks (M_wc). pH and EDTA‐complex affected the rate of intramolecular propagation during crosslinking polymerization. Our results indicated that G′ was primarily affected by the following factors in the order: (1) acidity of monomer, (2) M_wc, and (3) physical interactions induced by pH and EDTA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41026.