Gold‐Catalyzed Vapor–Liquid–Solid Germanium‐Nanowire Nucleation on Porous Silicon

Nanoporous Si(111) substrates are used to study the effects of Au catalyst coarsening on the nucleation of vapor–liquid–solid‐synthesized epitaxial Ge nanowires (NWs) at temperatures less than 400 °C. Porous Si substrates, with greater effective interparticle separations for Au surface diffusion than nonporous Si, inhibit catalyst coarsening and agglomeration prior to NW nucleation. This greatly reduces the variation in wire diameter and length and increases the yield compared to nucleation on identically prepared nonporous Si substrates.     

Coexistence of Vapor–Liquid–Solid and Vapor–Solid–Solid Growth Modes in Pd‐Assisted InAs Nanowires

During the growth of InAs nanowires from Pd catalyst particles on InAs(111)A substrates, two distinct classes of nanowires are observed with smooth or zigzagged sidewalls. It is shown that this is related to a bimodal distribution of the wire‐tip diameter: above a critical diameter wires grow with smooth sidewalls, and below with zigzagged morphology. Transmission electron microscopy analysis shows that the catalyst particles at the tip of zigzagged wires are smooth and have a higher aspect ratio than those at the tip of smooth wires. Zigzagged wires grow from liquid particles in the vapor–liquid–solid (VLS) mode whereas the smooth ones grow from solid particles in the vapor–solid–solid (VSS) mode.     

Oriented growth of magnetite along the carbon nanotubes via covalently bonded method in a simple solvothermal system

A new type of CNTs/magnetite hybrid material was prepared via covalently bonded method in a simple solvothermal system using FeCl₃ as iron source, ethylene glycol as the reducing agent, and 4-aminophenoxyphthalonitrile-grafted CNTs as templates. The magnetite nanoparticles, with the diameters of 70-80 nm, were self-assembled along the CNTs. The FTIR, UV-vis and DSC revealed that a stable covalent bond between nitriles group and iron ion promoted the oriented growth of magnetite nanoparticles along the CNTs, resulting in good dispersibility and solution storage stability. The magnetic properties measurements indicated that a higher saturated magnetization (70.7 emu g⁻¹) existed in the CNTs/magnetite hybrid material, which further enhanced the electromagnetic properties. The magnetic loss was caused mainly by natural resonance, which is in good agreement with the Kittel equation results. The novel electromagnetic hybrid material is believed to have potential applications in the microwave absorbing performances.     

Formation of Single Tiers of Bridging Silicon Nanowires for Transistor Applications Using Vapor–Liquid–Solid Growth from Short Silicon‐on‐Insulator Sidewalls

Single tiers of silicon nanowires that bridge the gap between the short sidewalls of silicon‐on‐insulator (SOI) source/drain pads are formed. The formation of a single tier of bridging nanowires is enabled by the attachment of a single tier of Au catalyst nanoparticles to short SOI sidewalls and the subsequent growth of epitaxial nanowires via the vapor–liquid–solid (VLS) process. The growth of unobstructed nanowire material occurs due to the attachment of catalyst nanoparticles on silicon surfaces and the removal of catalyst nanoparticles from the SOI‐buried oxide (BOX). Three‐terminal current–voltage measurements of the structure using the substrate as a planar backgate after VLS nanowire growth reveal transistor behaviour characteristics.     

A Liquid‐Metal–Elastomer Nanocomposite for Stretchable Dielectric Materials

Stretchable high‐dielectric‐constant materials are crucial for electronic applications in emerging domains such as wearable computing and soft robotics. While previous efforts have shown promising materials architectures in the form of dielectric nano‐/microinclusions embedded in stretchable matrices, the limited mechanical compliance of these materials significantly limits their practical application as soft energy‐harvesting/storage transducers and actuators. Here, a class of liquid metal (LM)–elastomer nanocomposites is presented with elastic and dielectric properties that make them uniquely suited for applications in soft‐matter engineering. In particular, the role of droplet size is examined and it is found that embedding an elastomer with a polydisperse distribution of nanoscale LM inclusions can enhance its electrical permittivity without significantly degrading its elastic compliance, stretchability, or dielectric breakdown strength. In contrast, elastomers embedded with microscale droplets exhibit similar improvements in permittivity but a dramatic reduction in breakdown strength. The unique enabling properties and practicality of LM–elastomer nanocomposites for use in soft machines and electronics is demonstrated through enhancements in performance of a dielectric elastomer actuator and energy‐harvesting transducer.     

A New Technique for Severe Plastic Deformation: The Cone–Cone Method

A new technique for producing ultrafine grained materials by severe plastic deformation is proposed. The principle and possible design of this technique, referred to as “cone–cone method,” are outlined and the first results of numerical simulations that demonstrate its feasibility are reported. These results give promise with regard to achieving very large plastic strains and the concomitant grain refinement in sheet products.