Enhanced Performance of Self‐Assembled Monolayer Field‐Effect Transistors with Top‐Contact Geometry through Molecular Tailoring,Heated Assembly,and Thermal Annealing

Low‐voltage self‐assembled monolayer field‐effect transistors (SAMFETs) that operate under an applied bias of less than ?3 V and a high hole mobility of 10^?2 cm² V^?1 s^?1 are reported. A self‐assembled monolayer (SAM) with a quaterthiophene semiconducting core and a phosphonic acid binding group is used to fabricate SAMFETs on both high‐voltage (AlO_x/300 nm SiO₂) and low‐voltage (HfO₂) dielectric platforms. High performance is achieved through enhanced SAM packing density via a heated assembly process and through improved electrical contact between SAM semiconductor and metal electrodes. Enhanced electrical contact is obtained by utilizing a functional methylthio head group combined with thermal annealing post gold source/drain electrode deposition to facilitate the interaction between SAM and electrode.     

Orders‐of‐Magnitude Reduction of the Contact Resistance in Short‐Channel Hot Embossed Organic Thin Film Transistors by Oxidative Treatment of Au‐Electrodes

In this study we report on the optimization of the contact resistance by surface treatment in short‐channel bottom‐contact OTFTs based on pentacene as semiconductor and SiO₂ as gate dielectric. The devices have been fabricated by means of nanoimprint lithography with channel lengths in the range of 0.3 μm < L < 3.0 μm. In order to reduce the contact resistance the Au source‐ and drain‐contacts were subjected to a special UV/ozone treatment, which induced the formation of a thin AuO_x layer. It turned out, that the treatment is very effective (i) in decreasing the hole‐injection barrier between Au and pentacene and (ii) in improving the morphology of pentacene on top of the Au contacts and thus reducing the access resistance of carriers to the channel. Contact resistance values as low as 80 Ω cm were achieved for gate voltages well above the threshold. In devices with untreated contacts, the charge carrier mobility shows a power‐law dependence on the channel length, which is closely related to the contact resistance and to the grain‐size of the pentacene crystallites. Devices with UV/ozone treated contacts of very low resistance, however, exhibit a charge carrier mobility in the range of 0.3 cm² V^–1 s^–1 < μ < 0.4 cm² V^–1 s^–1 independent of the channel length.     

A High‐k Fluorinated P(VDF‐TrFE)‐g‐PMMA Gate Dielectric for High‐Performance Flexible Field‐Effect Transistors

A newly synthesized high‐k polymeric insulator for use as gate dielectric layer for organic field‐effect transistors (OFETs) obtained by grafting poly(methyl methacrylate) (PMMA) in poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) via atom transfer radical polymerization transfer is reported. This material design concept intents to tune the electrical properties of the gate insulating layer (capacitance, leakage current, breakdown voltage, and operational stability) of the high‐k fluorinated polymer dielectric without a large increase in operating voltage by incorporating an amorphous PMMA as an insulator. By controlling the grafted PMMA percentage, an optimized P(VDF‐TrFE)‐g‐PMMA with 7 mol% grafted PMMA showing reasonably high capacitance (23–30 nF cm^?2) with low voltage operation and negligible current hysteresis is achieved. High‐performance low‐voltage‐operated top‐gate/bottom‐contact OFETs with widely used high mobility polymer semiconductors, poly[[2,5‐bis(2‐octyldodecyl)‐2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo [3,4‐c]pyrrole‐1,4‐diyl]‐alt‐[[2,2′‐(2,5‐thiophene)bis‐thieno(3,2‐b)thiophene]‐5,5′‐diyl]] (DPPT‐TT), and poly([N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)) are demonstrated here. DPPT‐TT OFETs with P(VDF‐TrFE)‐g‐PMMA gate dielectrics exhibit a reasonably high field‐effect mobility of over 1 cm² V^?1 s^?1 with excellent operational stability.     

Highly Stretchable,High‐Mobility,Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes

Highly stretchable, high‐mobility, and free‐standing coplanar‐type all‐organic transistors based on deformable solid‐state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i‐TPU), thereby showing high reliability under mechanical stimuli as well as low‐voltage operation. Unlike conventional ionic dielectrics, the i‐TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 µF cm^?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i‐TPU‐based organic transistors exhibit a mobility as high as 7.9 cm² V^?1 s^?1, high bendability (R_c, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low‐voltage operation (V_DS = ?1.0 V, V_GS = ?2.5 V). In addition, the electrical characteristics such as mobility, on‐current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free‐standing, fully stretchable, and semi‐transparent coplanar‐type all‐organic transistors can be fabricated by introducing a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low‐voltage operation (V_DS = ?1.5 V, V_GS = ?2.5 V) and an even higher mobility of up to 17.8 cm² V^?1 s^?1. Moreover, these devices withstand stretching up to 80% tensile strain.     

Controllable Shifts in Threshold Voltage of Top‐Gate Polymer Field‐Effect Transistors for Applications in Organic Nano Floating Gate Memory

Organic field‐effect transistor (FET) memory is an emerging technology with the potential to realize light‐weight, low‐cost, flexible charge storage media. Here, solution‐processed poly[9,9‐dioctylfluorenyl‐2,7‐diyl]‐co‐(bithiophene)] (F8T2) nano floating gate memory (NFGM) with a top‐gate/bottom‐contact device configuration is reported. A reversible shift in the threshold voltage (V_Th) and reliable memory characteristics was achieved by the incorporation of thin Au nanoparticles (NPs) as charge storage sites for negative charges (electrons) at the interface between polystyrene and cross‐linked poly(4‐vinylphenol). The F8T2 NFGM showed relatively high field‐effect mobility (µ_FET) (0.02 cm² V^?1 s^?1) for an amorphous semiconducting polymer with a large memory window (ca. 30 V), a high on/off ratio (more than 10⁴) during writing and erasing with an operation voltage of 80 V of gate bias in a relatively short timescale (less than 1 s), and a retention time of a few hours. This top‐gated polymer NFGM could be used as an organic transistor memory element for organic flash memory.     

Diketopyrrolopyrrole‐Based Conjugated Polymers Synthesized via Direct Arylation Polycondensation for High Mobility Pure n‐Channel Organic Field‐Effect Transistors

High‐performance unipolar n‐type conjugated polymers (CPs) are critical for the development of organic electronics. In the current paper, four “weak donor–strong acceptor” n‐type CPs based on pyridine flanked diketopyrrolopyrrole (PyDPP), namely PPyDPP1‐4FBT, PPyDPP2‐4FBT, PPyDPP1‐4FTVT, and PPyDPP2‐4FTVT, are synthesized via direct arylation polycondensation by using 3,3′,4,4′‐tetrafluoro‐2,2′‐bithiophene (4FBT) or (E)‐1,2‐bis(3,4‐difluorothien‐2‐yl)ethene (4FTVT) as weak donor unit. All four polymers exhibit low‐lying highest occupied molecular orbital (≈ ?5.90 eV) and lowest unoccupied molecular orbital energy levels (≈ ?3.70 eV). Top‐gate/bottom‐contact organic field‐effect transistors based on all four polymers display unipolar n‐channel characteristics with electron mobility (µ_e) above 1 cm² V^?1 s^?1 in air, and presented linear |I_SD|^1/2 ?V_GS plots and weak dependence of the extracted moblity on gate voltage (V_GS), indicative of the reliability of the extracted mobility values. Importantly, the devices based on PPyDPP1‐4FBT and PPyDPP2‐4FBT show a pure unipolar n‐channel transistor behavior as revealed by the typical unipolar n‐channel output characteristics and clear off‐regimes in transfer characteristics. Attributed to its high crystallinity and favorable thin film morphology, PPyDPP2‐4FBT shows the highest µ_e of 2.45 cm² V^?1 s^?1, which is among the highest for unipolar n‐type CPs reported to date. This is also the first report for DPP based pure n‐type CPs with µ_e greater than 1 cm² V^?1 s^?1.     

Oligothiophene‐Functionalized Truxene: Star‐Shaped Compounds for Organic Field‐Effect Transistors

Organic field‐effect transistors (OFETs) based on oligothiophene‐functionalized truxene derivatives have been fabricated for use as novel star‐shaped organic semiconductors in solution‐processible organic electronics. The electronic and optical properties of compounds 1 – 3 , with increasing numbers of thiophene rings at each of the three branches, have been investigated using scanning electron microscopy (SEM), X‐ray diffraction measurements, and ultraviolet–visible (UV‐vis) and photoluminescence spectroscopies. The results show that with a stepwise increase of the thiophene rings at every branch, a transition from a polycrystalline to an amorphous state is observed. The characteristics of compounds 1 , 2 , and 3 used for OFETs exhibit a significant difference. The mobility depends greatly on the morphology in the solid state, and decreases in going from 1 to 3 . Mobilities up to 1.03 × 10^–3 cm² V^–1 s^–1 and an on/off ratio of about 10³ for compound 1 have been achieved; these are the highest values for star‐shaped organic semiconductors used for OFETs so far. All the results demonstrate that the truxene core of the oligothiophene‐functionalized truxene derivatives not only extends the π‐delocalized system, but also leads to high mobilities for the compounds.     

Tunable Crystal Nanostructures of Pentacene Thin Films on Gate Dielectrics Possessing Surface‐Order Control

To enhance the electrical performance of pentacene‐based field‐effect transistors (FETs) by tuning the surface‐induced ordering of pentacene crystals, we controlled the physical interactions at the semiconductor/gate dielectric (SiO₂) interface by inserting a hydrophobic self‐assembled monolayer (SAM, CH₃‐terminal) of organoalkyl‐silanes with an alkyl chain length of C8, C12, C16, or C18, as a complementary interlayer. We found that, depending on the physical structure of the dielectric surfaces, which was found to depend on the alkyl chain length of the SAM (ordered for C18 and disordered for C8), the pentacene nano‐layers in contact with the SAM could adopt two competing crystalline phases—a “thin‐film phase” and “bulk phase” – which affected the π‐conjugated nanostructures in the ultrathin and subsequently thick films. The field‐effect mobilities of the FET devices varied by more than a factor of 3 depending on the alkyl chain length of the SAM, reaching values as high as 0.6 cm² V^?1 s^?1 for the disordered SAM‐treated SiO₂ gate‐dielectric. This remarkable change in device performance can be explained by the production of well π‐conjugated and large crystal grains in the pentacene nanolayers formed on a disordered SAM surface. The enhanced electrical properties observed for systems with disordered SAMs can be attributed to the surfaces of these SAMs having fewer nucleation sites and a higher lateral diffusion rate of the first seeding pentacene molecules on the dielectric surfaces, due to the disordered and more mobile surface state of the short alkyl SAM.     

High‐Performance,Low‐Operating‐Voltage Organic Field‐Effect Transistors with Low Pinch‐Off Voltages

Organic field‐effect transistors suffer from ultra‐high operating voltages in addition to their relative low mobility. A general approach to low‐operating‐voltage organic field‐effect transistors (OFETs) using donor/acceptor buffer layers is demonstrated. P‐type OFETs with acceptor molecule buffer layers show reduced operating voltages (from 60–100 V to 10–20 V), with mobility up to 0.19 cm² V^?1 s^?1 and an on/off ratio of 3 × 10⁶. The subthreshold slopes of the devices are greatly reduced from 5–12 V/decade to 1.68–3 V/decade. This favorable combination of properties means that such OFETs can be operated successfully at voltages below 20 V (|V_DS| ≤ 20 V, |V_GS| ≤ 20 V). This method also works for n‐type semiconductors. The reduced operating voltage and low pinch‐off voltage contribute to the improved ordering of the polycrystalline films, reduced grain boundary resistance, and steeper subthreshold slopes.     

High‐Performance,Air‐Stable,Top‐Gate,p‐Channel WSe2 Field‐Effect Transistor with Fluoropolymer Buffer Layer

High‐performance, air‐stable, p‐channel WSe₂ top‐gate field‐effect transistors (FETs) using a bilayer gate dielectric composed of high‐ and low‐k dielectrics are reported. Using only a high‐k Al₂O₃ as the top‐gate dielectric generally degrades the electrical properties of p‐channel WSe₂, therefore, a thin fluoropolymer (Cytop) as a buffer layer to protect the 2D channel from high‐k oxide forming is deposited. As a result, a top‐gate‐patterned 2D WSe₂ FET is realized. The top‐gate p‐channel WSe₂ FET demonstrates a high hole mobility of 100 cm²_­ V^?1 s^?1 and a I_ON/I_OFF ratio > 10⁷ at low gate voltages (V_GS ca. ?4 V) and a drain voltage (V_DS) of ?1 V on a glass substrate. Furthermore, the top‐gate FET shows a very good stability in ambient air with a relative humidity of 45% for 7 days after device fabrication. Our approach of creating a high‐k oxide/low‐k organic bilayer dielectric is advantageous over single‐layer high‐k dielectrics for top‐gate p‐channel WSe₂ FETs, which will lead the way toward future electronic nanodevices and their integration.     

High‐Mobility Air‐Stable Naphthalene Diimide‐Based Copolymer Containing Extended π‐Conjugation for n‐Channel Organic Field Effect Transistors

A high‐performance naphthalene diimide (NDI)‐based conjugated polymer for use as the active layer of n‐channel organic field‐effect transistors (OFETs) is reported. The solution‐processable n‐channel polymer is systematically designed and synthesized with an alternating structure of long alkyl substituted‐NDI and thienylene–vinylene–thienylene units (PNDI‐TVT). The material has a well‐controlled molecular structure with an extended π‐conjugated backbone, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n‐type OFET. The top‐gate, bottom‐contact device shows remarkably high electron charge‐carrier mobility of up to 1.8 cm² V^?1 s^?1 (I_on/I_off = 10⁶) with the commonly used polymer dielectric, poly(methyl methacrylate) (PMMA). Moreover, PNDI‐TVT OFETs exhibit excellent air and operation stability. Such high device performance is attributed to improved π–π intermolecular interactions owing to the extended π‐conjugation, apart from the improved crystallinity and highly interdigitated lamellar structure caused by the extended π–π backbone and long alkyl groups.     

Simultaneous Modification of Bottom‐Contact Electrode and Dielectric Surfaces for Organic Thin‐Film Transistors Through Single‐Component Spin‐Cast Monolayers

An efficient process is developed by spin‐coating a single‐component, self‐assembled monolayer (SAM) to simultaneously modify the bottom‐contact electrode and dielectric surfaces of organic thin‐film transistors (OTFTs). This effi cient interface modifi cation is achieved using n‐alkyl phosphonic acid based SAMs to prime silver bottom‐contacts and hafnium oxide (HfO₂) dielectrics in low‐voltage OTFTs. Surface characterization using near edge X‐ray absorption fi ne structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, atomic force microscopy (AFM), and spectroscopic ellipsometry suggest this process yields structurally well‐defi ned phosphonate SAMs on both metal and oxide surfaces. Rational selection of the alkyl length of the SAM leads to greatly enhanced performance for both n‐channel (C₆₀) and p‐channel (pentacene) based OTFTs. Specifi cally, SAMs of n‐octylphos‐phonic acid (OPA) provide both low‐contact resistance at the bottom‐contact electrodes and excellent interfacial properties for compact semiconductor grain growth with high carrier mobilities. OTFTs based on OPA modifi ed silver electrode/HfO₂ dielectric bottom‐contact structures can be operated using < 3V with low contact resistance (down to 700 Ohm‐cm), low subthreshold swing (as low as 75 mV dec^?1), high on/off current ratios of 107, and charge carrier mobilities as high as 4.6 and 0.8 cm² V^?1 s^?1, for C60 and pentacene, respectively. These results demonstrate that this is a simple and efficient process for improving the performance of bottom‐contact OTFTs.     

Boosting the Charge Transport Property of Indeno[1,2‐b]fluorene‐6,12‐dione though Incorporation of Sulfur‐ or Nitrogen‐Linked Side Chains

Alkyl chains are basic units in the design of organic semiconductors for purposes of enhancing solubility, tuning electronic energy levels, and tailoring molecular packing. This work demonstrates that the carrier mobilities of indeno[1,2‐b ]fluorene‐6,12‐dione ( IFD )‐based semiconductors can be dramatically enhanced by the incorporation of sulfur‐ or nitrogen‐linked side chains. Three IFD derivatives possessing butyl, butylthio, and dibutylamino substituents are synthesized, and their organic field‐effect transistors (OFET) are fabricated and characterized. The IFD possessing butyl substituents exhibits a very poor charge transport property with mobility lower than 10^?7 cm² V^?1 s^?1. In contrast, the hole mobility is dramatically increased to 1.03 cm² V^?1 s^?1 by replacing the butyl units with dibutylamino groups ( DBA‐IFD ), while the butylthio‐modified IFD ( BT‐IFD ) derivative exhibits a high and balanced ambipolar charge transport property with the maximum hole and electron mobilities up to 0.71 and 0.65 cm² V^?1 s^?1, respectively. Moreover, the complementary metal–oxide–semiconductor‐like inverters incorporated with the ambipolar OFETs shows sharp inversions with a maximum gain value up to 173. This work reveals that modification of the aromatic core with heteroatom‐linked side chains, such as alkylthio or dialkylamino, can be an efficient strategy for the design of high‐performance organic semiconductors.     

Organic Thin‐Film Transistors: Simultaneous Modification of Bottom‐Contact Electrode and Dielectric Surfaces for Organic Thin‐Film Transistors Through Single‐Component Spin‐Cast Monolayers (Adv. Funct. Mater. 8/2011)

An efficient process is developed by spin‐coating a single‐component, self‐assembled monolayer (SAM) to simultaneously modify the bottom‐contact electrode and dielectric surfaces of organic thin‐film transistors (OTFTs). This effi cient interface modifi cation is achieved using n‐alkyl phosphonic acid based SAMs to prime silver bottom‐contacts and hafnium oxide (HfO₂) dielectrics in low‐voltage OTFTs. Surface characterization using near edge X‐ray absorption fi ne structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, atomic force microscopy (AFM), and spectroscopic ellipsometry suggest this process yields structurally well‐defi ned phosphonate SAMs on both metal and oxide surfaces. Rational selection of the alkyl length of the SAM leads to greatly enhanced performance for both n‐channel (C₆₀) and p‐channel (pentacene) based OTFTs. Specifi cally, SAMs of n‐octylphos‐phonic acid (OPA) provide both low‐contact resistance at the bottom‐contact electrodes and excellent interfacial properties for compact semiconductor grain growth with high carrier mobilities. OTFTs based on OPA modifi ed silver electrode/HfO₂ dielectric bottom‐contact structures can be operated using < 3V with low contact resistance (down to 700 Ohm‐cm), low subthreshold swing (as low as 75 mV dec^?1), high on/off current ratios of 107, and charge carrier mobilities as high as 4.6 and 0.8 cm² V^?1 s^?1, for C60 and pentacene, respectively. These results demonstrate that this is a simple and efficient process for improving the performance of bottom‐contact OTFTs.     

Epindolidiones—Versatile and Stable Hydrogen‐Bonded Pigments for Organic Field‐Effect Transistors and Light‐Emitting Diodes

Hydrogen‐bonded pigments are remarkably stable high‐crystal lattice energy organic solids. Here a lesser‐known family of compounds, the epindolidiones, which demonstrates electronic transport with extraordinary stability, even in highly demanding aqueous environments, is reported. Hole mobilities in the range 0.05–1 cm² V^–1 s^–1 can be achieved, with lower electron mobilities of up to 0.1 cm² V^–1 s^–1. To help understand charge transport in epindolidiones, X‐ray diffraction is used to solve the crystal structure of 2,8‐difluoroepindolidione and 2,8‐dichloroepindolidione. Both derivatives crystallize with a linear‐chain H‐bonding lattice featuring two‐dimensional π–π stacking. Powder diffraction indicates that the unsubstituted epindolidione has very similar crystallinity. All types of epindolidiones measured here display strong low‐energy optical emission originating from excimeric states, which coexists with higher‐energy fluorescence. This can be exploited in light‐emitting diodes, which show the same hybrid singlet and low‐energy excimer electroluminescence. Low‐voltage FETs are fabricated with epindolidione, which operate reliably under repeated cyclic tests in different ionic solutions within the pH range 3–10 without degradation. Finally, in order to overcome the insolubility of epindolidiones in organic solvents, a chemical procedure is devised to allow solution‐processing via the introduction of suitable thermolabile solubilizing groups. This work shows the versatile potential of epindolidione pigments for electronics applications.     

Reusable Cellulose‐Based Hydrogel Sticker Film Applied as Gate Dielectric in Paper Electrolyte‐Gated Transistors

A new concept for reusable eco‐friendly hydrogel electrolytes based on cellulose is introduced. The reported electrolytes are designed and engineered through a simple, fast, low‐cost, and eco‐friendly dissolution method of microcrystalline cellulose at low temperature using an aqueous LiOH/urea solvent system. The cellulose solution is combined with carboxymethyl cellulose, followed by the regeneration and simultaneous ion incorporation. The produced free standing cellulose‐based electrolyte films exhibit interesting properties for application in flexible electrochemical devices, such as biosensors or electrolyte‐gated transistors (EGTs), because of their high specific capacitances (4–5 µF cm^?2), transparency, and flexibility. Indium–gallium–zinc‐oxide EGTs on glass with laminated cellulose‐based hydrogel electrolytes (CHEs) as the gate dielectric are produced presenting a low working voltage (<2 V), showing an on–off current ratio (I _on/off) of 10⁶, a subthreshold swing lower than 0.2 V dec^?1, and saturation mobility (μ_Sat) reaching 26 cm² V^?1 s^?1. The flexible CHE‐gated transistors on paper are also demonstrated, which operate at switching frequencies up to 100 Hz. Combining the flexibility of the EGTs on paper with the reusability of the developed CHEs is a breakthrough toward biodegradable advanced functional materials allied with disposable/recyclable and low‐cost electronic devices.     

Non‐Lithographic Fabrication of All‐2D α‐MoTe2 Dual Gate Transistors

As one of the emerging new transition‐metal dichalcogenides materials, molybdenum ditelluride (α‐MoTe₂) is attracting much attention due to its optical and electrical properties. This study fabricates all‐2D MoTe₂‐based field effect transistors (FETs) on glass, using thin hexagonal boron nitride and thin graphene in consideration of good dielectric/channel interface and source/drain contacts, respectively. Distinguished from previous works, in this study, all 2D FETs with α‐MoTe₂ nanoflakes are dual‐gated for driving higher current. Moreover, for the present 2D dual gate FET fabrications on glass, all thermal annealing and lithography processes are intentionally exempted for fully non‐lithographic method using only van der Waal's forces. The dual‐gate MoTe₂ FET displays quite a high hole and electron mobility over ≈20 cm² V^?1 s^?1 along with ON/OFF ratio of ≈10⁵ in maximum as an ambipolar FET and also demonstrates high drain current of a few tens‐to‐hundred μA at a low operation voltage. It appears promising enough to drive organic light emitting diode pixels and NOR logic functions on glass.     

Versatile α,ω‐Disubstituted Tetrathienoacene Semiconductors for High Performance Organic Thin‐Film Transistors

Facile one‐pot [1 + 1 + 2] and [2 + 1 + 1] syntheses of thieno[3,2‐b]thieno[2′,3′:4,5]thieno[2,3‐d]thiophene (tetrathienoacene; TTA) semiconductors are described which enable the efficient realization of a new TTA‐based series for organic thin‐film transistors (OTFTs). For the perfluorophenyl end‐functionalized derivative DFP‐TTA , the molecular structure is determined by single‐crystal X‐ray diffraction. This material exhibits n‐channel transport with a mobility as high as 0.30 cm²V^?1s^?1 and a high on‐off ratio of 1.8 × 10⁷. Thus, DFP‐TTA has one of the highest electron mobilities of any fused thiophene semiconductor yet discovered. For the phenyl‐substituted analogue, DP‐TTA , p‐channel transport is observed with a mobility as high as 0.21 cm²V^?1s^?1. For the 2‐benzothiazolyl (BS‐) containing derivative, DBS‐TTA , p‐channel transport is still exhibited with a hole mobility close to 2 × 10^?3 cm²V^?1s^?1. Within this family, carrier mobility magnitudes are strongly dependent on the semiconductor growth conditions and the gate dielectric surface treatment.     

Optimal Structure for High‐Performance and Low‐Contact‐Resistance Organic Field‐Effect Transistors Using Contact‐Doped Coplanar and Pseudo‐Staggered Device Architectures

A low contact resistance achieved on top‐gated organic field‐effect transistors by using coplanar and pseudo‐staggered device architectures, as well as the introduction of a dopant layer, is reported. The top‐gated structure effectively minimizes the access resistance from the contact to the channel region and the charge‐injection barrier is suppressed by doping of iron(III)trichloride at the metal/organic semiconductor interface. Compared with conventional bottom‐gated staggered devices, a remarkably low contact resistance of 0.1–0.2 kΩ cm is extracted from the top‐gated devices by the modified transfer line method. The top‐gated devices using thienoacene compound as a semiconductor exhibit a high average field‐effect mobility of 5.5–5.7 cm² V^?1 s^?1 and an acceptable subthreshold swing of 0.23–0.24 V dec^?1 without degradation in the on/off ratio of ≈10⁹. Based on these experimental achievements, an optimal device structure for a high‐performance organic transistor is proposed.     

Anisotropy of Charge Transport in a Uniaxially Aligned and Chain‐Extended,High‐Mobility,Conjugated Polymer Semiconductor

Charge transport in the ribbon phase of poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno[3,2‐b]thiophene) (PBTTT)—one of the most highly ordered, chain‐extended crystalline microstructures available in a conjugated polymer semiconductor—is studied. Ribbon‐phase PBTTT has previously been found not to exhibit high carrier mobilities, but it is shown here that field‐effect mobilities depend strongly on the device architecture and active interface. When devices are constructed such that the ribbon‐phase films are in contact with either a polymer gate dielectric or an SiO₂ gate dielectric modified by a hydrophobic, self‐assembled monolayer, high mobilities of up to 0.4 cm² V^?1 s^?1 can be achieved, which is comparable to those observed previously in terrace‐phase PBTTT. In uniaxially aligned, zone‐cast films of ribbon‐phase PBTTT the mobility anisotropy is measured for transport both parallel and perpendicular to the polymer chain direction. The mobility anisotropy is relatively small, with the mobility along the polymer chain direction being higher by a factor of 3–5, consistent with the grain size encountered in the two transport directions.