End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.     

Stabilization of Semiconducting Polymers with Silsesquioxane

Polyhedral oligomeric silsesquioxanes (POSS) anchored to poly(2‐methoxy‐5‐(2‐ethylhexyloxy)‐1.4‐phenylenevinylene) (MEH‐PPV) (MEH‐PPV–POSS), and to poly(9,9‐dihexylfluorenyl‐2,7‐diyl) (PFO) (PFO–POSS) were synthesized. Compared with the corresponding parent polymers, MEH‐PPV and PFO, MEH‐PPV–POSS and PFO–POSS have better thermal stability. MEH‐PPV–POSS and MEH‐PPV have identical absorption and photoluminescent (PL) spectra, both in solution and as thin films. They also have identical electroluminescent (EL) spectra. Devices made from MEH‐PPV–POSS exhibit higher brightness (1320 cd m^–2 at 3.5 V) and higher external quantum efficiency (η_ext = 2.2 % photons per electron) compared to MEH‐PPV (230 cd m^–2 at 3.5 V and η_ext = 1.5 % ph el^–1). Compared with PFO in the same device configuration, PFO–POSS has improved blue EL emission and higher η_ext.     

High‐Performance Organic Light‐Emitting Diodes Based on Intramolecular Charge‐Transfer Emission from Donor–Acceptor Molecules: Significance of Electron‐ Donor Strength and Molecular Geometry

Organic light‐emitting diodes based on intramolecular‐charge‐transfer emission from two related donor–acceptor (D–A) molecules, 3,7‐[bis(4‐phenyl‐2‐quinolyl)]‐10‐methylphenothiazine (BPQ‐MPT) and 3,6‐[bis(4‐phenyl‐2‐quinolyl)]‐9‐methylcarbazole (BPQ‐MCZ), were found to have electroluminescence (EL) efficiencies and device brightnesses that differ by orders of magnitude. High brightness (> 40 000 cd m^–2) and high efficiency (21.9 cd A^–1, 10.8 lm W^–1, 5.78 % external quantum efficiency (EQE) at 1140 cd m^–2) green EL was achieved from the BPQ‐MPT emitter, which has its highest occupied molecular orbital (HOMO) level at 5.09 eV and a nonplanar geometry. In contrast, diodes with much lower brightness (2290 cd m^–2) and efficiency (1.4 cd A^–1, 0.66 lm W^–1, 1.7 % EQE at 405 cd m^–2) were obtained from the BPQ‐MCZ emitter, which has its HOMO level at 5.75 eV and exhibits a planar geometry. Compared to BPQ‐MCZ, the higher‐lying HOMO level of BPQ‐MPT facilitates more efficient hole injection/transport and a higher charge‐recombination rate, while its nonplanar geometry ensures diode color purity. White EL was observed from BPQ‐MCZ diodes owing to a blue intramolecular charge‐transfer emission and a yellow–orange intermolecular excimer emission, enabled by the planar molecular geometry. These results demonstrate that high‐performance light‐emitting devices can be achieved from intramolecular charge‐transfer emission, while highlighting the critical roles of the electron‐donor strength and the molecular geometry of D–A molecules.     

Monodisperse Starburst Oligofluorene‐Functionalized 4,4′,4″‐Tris(carbazol‐9‐yl)‐triphenylamines: Their Synthesis and Deep‐Blue Fluorescent Properties for Organic Light‐Emitting Diode Applications

Four monodisperse starburst oligomers bearing a 4,4′,4″‐tris(carbazol‐9‐yl)‐triphenylamine (TCTA) core and six oligofluorene arms are synthesized and characterized. The lengths of oligofluorene arms vary from one to four fluorene units, giving the starburst oligomers molecular weights ranging from 3072 to 10 068 Da (1 Da = 1.66 × 10^–27 kg). All of the starburst oligomers have good film‐forming capabilities, and display bright, deep‐blue fluorescence (λ_max = 395–416 nm) both in solution and in the solid state, with the quantum efficiencies of the films (Φ_PL) varying between 27 and 88 %. Electrochemical studies demonstrate that these materials have large energy gaps, and are stable for both p‐doping and n‐doping processes. Electroluminescent devices are successfully fabricated using these materials as hole‐transporting emitters, and emit deep‐blue light. Devices with luminance values up to 1025 cd m^–2 at 11 V and luminous efficiencies of 0.47 cd A^–1 at 100 cd m^–2 have been produced, which translates to an external quantum efficiency of 1.4 %. In addition, these large‐energy‐gap starburst oligomers are good host materials for red electrophosphorescence. The luminance of the red electrophosphorescent devices is as high as 4452 cd m^–2, with a luminous efficiency of 4.31 cd A^–1 at 15 mA cm^–2: This value is much higher than those obtained from the commonly used hole‐transporting materials, such as poly(vinyl carbazole) (PVK) (1.10 cd A^–1 at 16 mA cm^–2).     

Highly Efficient Electroluminescence from Green‐Light‐Emitting Electrochemical Cells Based on CuI Complexes

The complexes [Cu(dnbp)(DPEphos)]⁺(X^–) (dnbp and DPEphos are 2,9‐di‐n‐butyl‐1,10‐phenanthroline and bis[2‐(diphenylphosphino)phenyl]ether, respectively, and X^– is BF₄^–, ClO₄^–, or PF₆^–) can form high‐quality films with photoluminescence quantum yields of up to 71 ± 7 %. Their electroluminescent properties are studied using the device structure indium tin oxide (ITO)/complex/metal cathode. The devices emit green light efficiently, with an emission maximum of 523 nm, and work in the mode of light‐emitting electrochemical cells. The response time of the devices greatly depends on the driving voltage, the counterions, and the thickness of the complex film. After pre‐biasing at 25 V for 40 s, the devices turn on instantly, with a turn‐on voltage of ca. 2.9 V. A current efficiency of 56 cd A^–1 and an external quantum efficiency of 16 % are realized with Al as the cathode. Using a low‐work‐function metal as the cathode can significantly enhance the brightness of the device almost without affecting the turn‐on voltage and current efficiency. With a Ca cathode, a brightness of 150 cd m^–2 at 6 V and 4100 cd m^–2 at 25 V is demonstrated. The electroluminescent performance of these types of complexes is among the best so far for transition metal complexes with counterions.     

2,5‐Functionalized Spiro‐Bisiloles as Highly Efficient Yellow‐Light Emitters in Electroluminescent Devices

New spiro‐bisilole molecules functionalized with nitrogen‐containing heterocyclic groups including 7‐azaindolyl, indolyl, and 2,2′‐dipyridylamino have been synthesized. These molecules are found to display good chemical and thermal stability. They are luminescent in solution and in the solid state with an emission color ranging from blue–green to yellow, depending on the functional group. In the solid state, they display high photoluminescence quantum efficiency (32–40 %). The electroluminescence properties for one of the new molecules, 2,3,3′,4,4′,5‐hexaphenyl‐2′,5′‐bis(p‐2,2′‐dipyridylaminophenyl)spiro‐bisilole, have been investigated by fabricating single‐layer and double‐layer electroluminescent devices. The double‐layer device, in which N,N′‐bis(1‐naphthyl)‐N,N′‐diphenylbenzidine acts as the hole‐transport layer and the functionalized spiro‐bisilole functions as the emitter (emission wavelength = 566 nm) and the electron‐transport layer, displays a brightness of 8440 cd m^–2 at 9 V with a current efficiency of 1.71 cd A^–1. No evidence of exiplex emission is observed.     

Blue‐Light‐Emitting Oligoquinolines: Synthesis,Properties, and High‐Efficiency Blue‐Light‐Emitting Diodes

The synthesis, photophysics, cyclic voltammetry, and highly efficient blue electroluminescence of a series of four new n‐type conjugated oligomers, 6,6′‐bis(2,4‐diphenylquinoline) (B1PPQ), 6,6′‐bis(2‐(4‐tert‐butylphenyl)‐4‐phenylquinoline) (BtBPQ), 6,6′‐bis(2‐p‐biphenyl)‐4‐phenylquinoline) (B2PPQ), and 6,6′‐bis((3,5‐diphenylbenzene)‐4‐phenylquinoline) (BDBPQ) is reported. The oligoquinolines have high glass‐transition temperatures (T_g ≥ 133 °C), reversible electrochemical reduction, and high electron affinities (2.68–2.81 eV). They emit blue photoluminescence with 0.73–0.94 quantum yields and 1.06–1.42 ns lifetimes in chloroform solutions. High‐performance organic light‐emitting diodes (OLEDs) with excellent blue chromaticity coordinates are achieved from all the oligoquinolines. OLEDs based on B2PPQ as the blue emitter give the best performance with a high brightness (19 740 cd m^–2 at 8.0 V), high efficiency (7.12 cd A^–1 and 6.56 % external quantum efficiency at 1175 cd m^–2), and excellent blue color purity as judged by the Commission Internationale de L'Eclairage (CIE) coordinates (x = 0.15,y = 0.16). These results represent the best efficiency of blue OLEDs from neat fluorescent organic emitters reported to date. These results demonstrate the potential of oligoquinolines as emitters and electron‐transport materials for developing high‐performance blue OLEDs.     

Kinked Star‐Shaped Fluorene/ Triazatruxene Co‐oligomer Hybrids with Enhanced Functional Properties for High‐Performance,Solution‐Processed,Blue Organic Light‐Emitting Diodes

A novel series of kinked star‐shaped oligofluorene/triazatruxene hybrids are conveniently prepared via a powerful microwave‐enhanced multiple coupling methodology. Constructing kinked star‐shaped architectures can effectively suppress crystallization and aggregation. The resulting materials are highly amorphous, showing stable amorphous morphology against crystallization. A triazatruxene core endows the materials with elevated highest occupied molecular orbital (HOMO) levels that are well matched to the anode work function, leading to a significantly improved hole‐injection property. They hybrids are highly luminescent in both solution (quantum yield is 0.52–0.80) and the solid‐state (quantum yield is 0.45–0.76) with bright blue emission. Remarkably, solution‐processed devices displaying single‐layer electroluminescence (EL) based on these oligomers exhibit efficient blue EL and demonstrate striking color stability, almost unchanged with increasing driving voltage. The best device performance has a rather low turn‐on voltage (3.3 V) and a high device efficiency (2.16 % @ 2382 cd m^–2) as well as a high brightness (7714 cd m^–2 @ 10 V) with CIE coordinates of (0.16, 0.15); it shows remarkably better EL performance than devices based on linear oligofluorene or polyfluorene counterparts. The results prove that an oligomer with kinked star‐shaped architecture is extremely promising for efficient and stable blue EL. The reasons for the enhanced functional properties and the improved color stability are discussed in relation to the chemical structures and components.     

Synthesis and Characterization of n‐Type Materials for Non‐Doped Organic Red‐Light‐Emitting Diodes

Two compounds, 2,3‐dicyano‐5,6‐di(4′‐diphenylamino‐biphenyl‐4‐yl)pyrazine (CAPP) and 6,7‐dicyano‐2,3‐di(4′‐diphenylamino‐biphenyl‐4‐yl)quinoxaline (CAPQ), capable of intramolecular charge transfer, have been designed and synthesized in high yield by a convenient procedure. The compounds have been fully characterized spectroscopically. They have a high thermal stability and show bright light emission both in non‐polar solvents and in the solid state. Moreover, they exhibit excellent reversible oxidation and reduction waves. The higher energy level of the highest occupied molecular orbital (–5.3 eV) and the triphenylamine group are advantageous for hole‐injection/transport. In addition, the high electron affinities of 3.4 eV and the observed reversible reductive process suggest that these compounds enhance electron injection and have potential for use in electron transport. Three types of non‐doped red‐light‐emitting diodes have been studied using CAPP and CAPQ as the electron‐transporting and host‐light‐emitting layers, respectively. The devices exhibit red electroluminescence (EL), and constant Commission Internationale de l'Eclairage coordinates have been observed on increasing the current density. Pure red EL of CAPP, with a maximum brightness of 536 cd m^–2 and an external quantum efficiency of 0.7 % in ambient air, was achieved.     

High‐Performance Quantum‐Dot Light‐Emitting Diodes Using NiOx Hole‐Injection Layers with a High and Stable Work Function

Solution‐processed oxide thin films are actively pursued as hole‐injection layers (HILs) in quantum‐dot light‐emitting diodes (QLEDs), aiming to improve operational stability. However, device performance is largely limited by inefficient hole injection at the interfaces of the oxide HILs and high‐ionization‐potential organic hole‐transporting layers. Solution‐processed NiO_x films with a high and stable work function of ≈5.7 eV achieved by a simple and facile surface‐modification strategy are presented. QLEDs based on the surface‐modified NiO_x HILs show driving voltages of 2.1 and 3.3 V to reach 1000 and 10 000 cd m^?2, respectively, both of which are the lowest among all solution‐processed LEDs and vacuum‐deposited OLEDs. The device exhibits a T₉₅ operational lifetime of ≈2500 h at an initial brightness of 1000 cd m^?2, meeting the commercialization requirements for display applications. The results highlight the potential of solution‐processed oxide HILs for achieving efficient‐driven and long‐lifetime QLEDs.     

Highly Efficient Pure‐White‐Light‐Emitting Diodes from a Single Polymer: Polyfluorene with Naphthalimide Moieties

Light‐emitting diodes exhibiting efficient pure‐white‐light electroluminescence have been successfully developed by using a single polymer: polyfluorene derivatives with 1,8‐naphthalimide chromophores chemically doped onto the polyfluorene backbones. By adjusting the emission wavelength of the 1,8‐naphthalimide components and optimizing the relative content of 1,8‐naphthalimide derivatives in the resulting polymers, white‐light electroluminescence from a single polymer, as opposed to a polymer blend, has been obtained in a device with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)(50 nm)/polymer(80 nm)/Ca(10 nm)/Al(100 nm). The device exhibits Commission Internationale de l'Eclairage coordinates of (0.32,0.36), a maximum brightness of 11 900 cd m^–2, a current efficiency of 3.8 cd A^–1, a power efficiency of 2.0 lm W^–1, an external quantum efficiency of 1.50 %, and quite stable color coordinates at different driving voltages, even at high luminances of over 5000 cd m^–2.     

A Hole‐Transporting Material with Controllable Morphology Containing Binaphthyl and Triphenylamine Chromophores

An organic compound with two triphenylamine moieties linked with binaphthyl at the 3,3′‐positions (2,2′‐dimethoxyl‐3,3′‐ di(phenyl‐4‐yl‐diphenyl‐amine)‐[1,1′]‐binaphthyl, TPA–BN–TPA) can be synthesized by Suzuki coupling. Amorphous and homogeneous films are obtained by either vacuum deposition or spin‐coating from solution in good solvents, while single crystals are grown in an appropriate polar solvent. X‐ray crystallography showed that a TPA–BN–TPA crystal is a multichannel structure containing solvent molecules in the channels. The intramolecular charge‐transfer state resulting from amino conjugation effects is observed by solvatochromic experiments. The high glass‐transition temperature (130 °C) and decomposition temperature (439 °C) of this material, in combination with its reversible oxidation property, make it a promising candidate as a hole‐transport material for light‐emitting diodes. With TPA–BN–TPA as the hole‐transporting layer in an indium tin oxide/TPA–BN–TPA/aluminum tris(8‐hydroxyquinoline)/Mg:Ag device, a brightness of about 10 100 cd m^–2 at 15.6 V with a maximum efficiency of 3.85 cd A^–1 is achieved, which is superior to a device with N,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐[1,1′‐biphenyl]‐4,4′‐diamine as the hole‐transporting layer under the same conditions. Other devices with TPA–BN–TPA as the blue‐light‐emitting layer or host for a blue dye emitter are also studied.     

Solution‐Processable,High‐Performance Flexible Electroluminescent Devices Based on High‐k Nanodielectrics

Flexible alternating‐current electroluminescent (ACEL) devices have attracted considerable attention for their ability to produce uniform light emission under bent conditions and have enormous potential for applications in back lighting panels, decorative lighting in automobiles, and panel displays. Nevertheless, flexible ACEL devices generally require a high operating bias, which precludes their implementation in low power devices. Herein, solution‐processed La‐doped barium titanate (BTO:La) nanocuboids (≈150 nm) are presented as high dielectric constant (high‐k) nanodielectrics, which can enhance the dielectric constant of an ACEL device from 2.6 to 21 (at 1 kHz), enabling the fabrication of high‐performance flexible ACEL devices with a lower operating voltage as well as higher brightness (≈57.54 cd m^?2 at 240 V, 1 kHz) than devices using undoped BTO nanodielectrics (≈14.3 cd m^?2 at 240 V, 1 kHz). Furthermore, a uniform brightness across the whole panel surface of the flexible ACEL devices and excellent device reliability are achieved via the use of uniform networks of crossaligned silver nanowires as highly conductive and flexible electrodes. The results offer experimental validation of high‐brightness flexible ACELs using solution‐processed BTO:La nanodielectrics, which constitutes an important milestone toward the implementation of high‐k nanodielectrics in flexible displays.     

White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene Blue Host and Side‐Chain‐Located Orange Dopant

Four single polymers with two kinds of attachment of orange chromophore to blue polymer host for white electroluminescence (EL) were designed. The effect of the side‐chain attachment and main‐chain attachment on the EL efficiencies of the resulting polymers was compared. The side‐chain‐type single polymers are found to exhibit more efficient white EL than that of the main‐chain‐type single polymers. Based on the side‐chain‐type white single polymer with 4‐(4‐alkyloxy‐phenyl)‐7‐(4‐diphenylamino‐phenyl)‐2,1,3‐benzothiadiazoles as the orange‐dopant unit and polyfluorene as the blue polymer host, white EL with simultaneous orange (λ_max = 545 nm) and blue emission (λ_max = 432 nm/460 nm) is realised. A single‐layer device (indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer/Ca/Al) made of these polymers emits white light with the Commission Internationale de l'Éclairage coordinates of (0.30,0.40), possesses a turn‐on voltage of 3.5 V, luminous efficiency of 10.66 cd A^–1, power efficiency of 6.68 lm W^–1, and a maximum brightness of 21 240 cd m^–2.     

A DCM‐Type Red‐Fluorescent Dopant for High‐Performance Organic Electroluminescent Devices

2‐(2‐tert‐Butyl‐6‐((E)‐2‐(2,6,6‐trimethyl‐2,4,5,6‐tetrahydro‐1H‐pyrrolo[3,2,1‐ij]quinolin‐8‐yl)vinyl)‐4H‐pyran‐4‐ylidene)malononitrile (DCQTB) is designed and synthesized in high yield for application as the red‐light‐emitting dopant in organic light‐emitting diodes (OLEDs). Compared with 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7,‐tetramethyljulolidyl‐9‐enyl)‐4H‐pyran (DCJTB), one of the most efficient red‐emitting dopants, DCQTB exhibits red‐shifted fluorescence but blue‐shifted absorption. The unique characteristics of DCQTB with respect to DCJTB are utilized to achieve a red OLED with improved color purity and luminous efficiency. As a result, the device that uses DCQTB as dopant, with the configuration: indium tin oxide (ITO)/N,N′‐bis(1‐naphthyl)‐N,N′‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine (NPB; 60 nm)/tris(8‐quinolinolato) aluminum (Alq₃):dopant (2.3 wt %) (7 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 12 nm)/Alq₃(45 nm)/LiF(0.3 nm):Al (300 nm), shows a larger maximum luminance (L_max = 6021 cd m^–2 at 17 V), higher maximum efficiency (η_max = 4.41 cd A^–1 at 11.5 V (235.5 cd m^–2)), and better chromaticity coordinates (Commission Internationale de l'Eclairage, CIE, (x,y) = (0.65,0.35)) than a DCJTB‐based device with the same structure (L_max = 3453 cd m^–2 at 15.5 V, η_max = 3.01 cd A^–1 at 10 V (17.69 cd m^–2), and CIE (x,y) = (0.62,0.38)). The possible reasons for the red‐shifted emission but blue‐shifted absorption of DCQTB relative to DCJTB are also discussed.     

Combinatorial Development of Blue OLEDs Based on Star Shaped Molecules

In this paper we describe the use of combinatorial vapor deposition techniques for the optimization of blue organic light emitting diodes (OLEDs). In these devices the star shaped molecule 1 with a triphenylamine core and three fluorene side groups serves as hole transport and emitting layer. Compound 2 with a much lower lying HOMO and a larger bandgap is used as hole blocking layer. Using combinatorial vapor deposition 42 OLEDs with thickness gradients of both the hole transport and the hole blocking layer have been simultaneously prepared on one substrate. The physical characterization of the devices clearly shows that a hole blocking layer of the star shaped molecule 2 is necessary in order to obtain pure blue emission with CIE coordinates of x = 0.15 and y = 0.15. A thickness of only 5 nm of the blocking layer is sufficient, and with increasing layer thickness the brightness of the blue devices drops. The blue devices exhibit a brightness of 400 cd m^–2 and a luminous efficiency of 2 cd A^–1. The thickness variations of both the hole transport and the hole blocking layer have been made in one combinatorial evaporation experiment on a single substrate using a set of movable masks. This demonstrates how efficient combinatorial methods can be used for the development of OLEDs.     

High‐Efficiency Red Phosphorescent Iridium Dendrimers with Charge‐ Transporting Dendrons: Synthesis and Electroluminescent Properties

A series of 1‐phenylisoquinoline derivatives encapsulated with peripheral arylamines as dendrons are synthesized by using the Ullmann reaction and palladium‐catalyzed aromatic carbon–carbon Suzuki‐coupling reactions. Red‐emitting dendritic iridium complexes (called G1‐1 , G1‐2 , and G2 ) are synthesized using the following derivatives: N,N‐diphenyl‐3′‐isoquinolin‐4‐biphenylaniline, N,N‐di(9,9‐dimethylfluorenyl‐3′‐isoquinolin‐4‐biphenylaniline, N,N‐di(4′‐di(2′‐(9′,9′‐dimethylfluorenyl)amine)biphenyl‐3′‐isoquinolin‐4‐biphenylaniline as the first ligands and 5‐methyl‐3‐(pyridin‐2′‐yl)‐1H‐1,2,4‐triazole as an ancillary ligand. The obtained dendrimers are soluble in common organic solvents, and uniform thin films can be spin‐coated from such solutions. Devices fabricated from dendritic iridium complexes G1‐2 and G2 with a small molecule host are fabricated by spin‐coating from chloroform solution in different device configurations. G1‐2 and G2 show similar device performances with maximum external quantum efficiencies (EQEs) of 12.8 % and 11.8 % (photons/electron) and luminous efficiency of 9.2 cd A^–1 and 8.5 cd A^–1 at 0.1 mA cm^–2, respectively. Devices based on polymer host poly(9,9‐dioctylfluorene)(PFO) (30 % PBD (2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazole)) show a slightly higher efficiency for G1‐2 , with a maximum EQE of 13.9 % at a much higher current density of 6.4 mA cm^–2 and luminance of 601 cd m^–2.     

A Novel Fluorene‐Triphenylamine Hybrid That is a Highly Efficient Host Material for Blue‐, Green‐, and Red‐Light‐Emitting Electrophosphorescent Devices

TFTPA (tris[4‐(9‐phenylfluoren‐9‐yl)phenyl]amine), a novel host material that contains a triphenylamine core and three 9‐phenyl‐9‐fluorenyl peripheries, was effectively synthesized through a Friedel‐Crafts‐type substitution reaction. Owing to the presence of its sterically bulky 9‐phenyl‐9‐fluorenyl groups, TFTPA exhibits a high glass transition temperature (186 °C) and is morphologically and electrochemically stable. In addition, as demonstrated from atomic force microscopy measurements, the aggregation of the triplet iridium dopant is significantly diminished in the TFTPA host, resulting in a highly efficient full‐color phosphorescence. The performance of TFTPA ‐based devices is far superior to those of the corresponding mCP‐ or CBP‐based devices, particularly in blue‐ and red‐emitting electrophosphorescent device systems. The efficiency of the FIrpic‐based blue‐emitting device reached 12 % (26 cd A^–1) and 18 lm W^–1 at a practical brightness of 100 cd m^–2; the Ir(piq)₂acac‐based red‐emitting device exhibited an extremely low turn‐on voltage (2.6 V) and a threefold enhancement in device efficiency (9.0 lm W^–1) relative to those of reference devices based on the CBP host material.     

Fluorene‐Carbazole Dendrimers: Synthesis,Thermal, Photophysical and Electroluminescent Device Properties

Novel hole‐transporting dendrimeric molecules containing dioctylfluorene, spirobi(fluorene) and spiro(cylododecane‐fluorene) as the core unit and different numbers of carbazole and thiophene moieties as the peripheral groups are synthesized. All the dendrimers are characterized by ¹H NMR, ¹³C NMR, FTIR, UV–vis, PL spectroscopy, and MALDI‐TOF. They are thermally stable with high glass transition and decomposition temperatures and exhibit chemically reversible redox processes. They are used as the hole‐transporting layer (HTL) material for multilayer organic light emitting diodes (OLEDs) with a low turn‐on voltage of around 2.5 V and a bright green emission with a maximum luminance of around 25400 cd m^?2.     

High‐Performance All‐Polymer White‐Light‐Emitting Diodes Using Polyfluorene Containing Phosphonate Groups as an Efficient Electron‐Injection Layer

We report an efficient non‐doped all‐polymer polymer white‐light‐emitting diode (PWLED) with a fluorescent three‐color, white single polymer as an emissive layer, an ethanol‐soluble phosphonate‐functionalized polyfluorene (PF‐EP) as an electron‐injection/electron‐transport layer, and LiF/Al as a cathode, respectively. The all‐polymer PWLED achieves a peak external quantum efficiency of 6.7%, a forward viewing luminous efficiency of 15.4 cd A^?1 and a power efficiency of 11.4 lm W^?1, respectively, at a brightness of 347 cd m^?2 with Commission Internationale d’Eclairage coordinates of (0.37, 0.42) and color rendering index of 85, which is the best results among the non‐doped PWLEDs. Moreover, this kind of PWLED not only shows excellent color stability, but also achieves high brightness at low voltages. The brightness reaches 1000, 10000, and 46830 cd m^?2 at voltages of 4.5, 5.4, and 7.5 V, respectively. The significant enhancement of white‐single‐polymer‐based PWLEDs with PF‐EP/LiF/Al to replace for the commonly used Ca/Al cathode is attributed to the more efficient electron injection at PF‐EP/LiF/Al interfaces, and the coordinated protecting effect of PF‐EP from diffusion of Al atoms into the emissive layer and exciton‐quenching near cathode interfaces. The developed highly efficient non‐doped all‐polymer PWLEDs are well suitable for solution‐processing technology and provide a huge potential of low‐cost large‐area manufacturing for PWLEDs.