Self‐Healing Materials via Reversible Crosslinking of Poly(ethylene oxide)‐Block‐Poly(furfuryl glycidyl ether) (PEO‐b‐PFGE) Block Copolymer Films

The application of well‐defined poly(furfuryl glycidyl ether) (PFGE) homopolymers and poly(ethylene oxide)‐b‐poly(furfuryl glycidyl ether) (PEO‐b‐PFGE) block copolymers synthesized by living anionic polymerization as self‐healing materials is demonstrated. This is achieved by thermo‐reversible network formation via (retro) Diels‐Alder chemistry between the furan groups in the side‐chain of the PFGE segments and a bifunctional maleimide crosslinker within drop‐cast polymer films. The process is studied in detail by differential scanning calorimetry (DSC), depth‐sensing indentation, and profilometry. It is shown that such materials are capable of healing complex scratch patterns, also multiple times. Furthermore, microphase separation within PEO‐b‐PFGE block copolymer films is indicated by small angle X‐ray scattering (lamellar morphology with a domain spacing of approximately 19 nm), differential scanning calorimetry, and contact angle measurements.     

Stepwise Drug‐Release Behavior of Onion‐Like Vesicles Generated from Emulsification‐Induced Assembly of Semicrystalline Polymer Amphiphiles

Tailoring unique nanostructures of biocompatible and degradable polymers and the consequent elucidation of shape effects in drug delivery open tremendous opportunities not only to broaden their biomedical applications but also to identify new directions for the design of nanomedicine. Cellular organelles provide the basic structural and functional motif for the development of novel artificial nanoplatforms. Herein, aqueous onion‐like vesicles structurally mimicking multicompartmentalized cellular organelles by exhibiting exquisite control over the molecular assembly of poly(ethylene oxide)‐block‐poly(ε‐caprolactone) (PEO‐b‐PCL) semicrystalline amphiphiles are reported. Compared to in situ self‐assembly, emulsification‐induced assembly endows the resulting nanoaggregates of PEO‐b‐PCL with structural diversity such as helical ribbons and onion‐like vesicles through the molecular packing modification in the hydrophobic core with a reduction of inherent crystalline character of PCL. In particular, onion‐like vesicles composed of alternating walls and water channels are interpreted by nanometer‐scale 3D visualization via cryogenic‐electron tomo­graphy (cryo‐ET). Interestingly, the nature of the multi‐walled vesicles results in high drug‐loading capacity and stepwise drug release through hydrolytic cleavage of the PCL block. The crystalline arrangement of PCL at the molecular scale and the spatial organization of assembled structure at the nanoscale significantly affect the drug‐release behavior of PEO‐b‐PCL nanovehicles.     

Block Copolymer Permeable Membrane with Visualized High‐Density Straight Channels of Poly(ethylene oxide)

A simple fabrication, scalable to centimeter scale, of a permeable membrane made of block copolymer containing molecular transport channels is demonstrated by coating photo‐crosslinkable liquid‐crystalline block copolymer, consisting of poly(ethylene oxide) (PEO) and poly(methacrylate) (PMA) bearing stilbene (Stb) mesogens in the side chains (PEO₁₁₄‐b‐PMA(Stb)₅₂), onto a sacrificial cellulose acetate film substrate. After thermal annealing, perpendicularly aligned and hexagonally arranged PEO cylindrical domains with a surface density of 10¹¹ cm^?2 were formed and then fixed efficiently by photo‐crosslinking the stilbene moieties in the PMA(Stb) domains by [2 + 2] dimerization. The fully penetrating straight PEO cylindrical domains across the 480‐nm‐thick membrane were well‐defined and visualized as molecule‐transport channels. After exfoliated by removal of the cellulose acetate layer, the membrane could be transferred onto another substrate by either scooping or a horizontal lifting method. Throughout the processes, the fully penetrating PEO channels across the membrane are preserved to open at both ends. A simple permeation experiment demonstrates that rhodamine dyes permeate efficiently through the PEO cylindrical channels of the annealed membrane but not across a non‐annealed one.     

Tailor‐made Polymeric Membranes based on Segmented Block Copolymers for CO2 Separation

This paper reports the design of a tailor made polymeric membrane by using poly(ethylene oxide)–poly(butylene terephthalate) (PEO‐PBT) multi‐block copolymers. Their properties are controlled by the fraction of the PEO phase and its molecular weight. To explain the effect of structural changes in copolymer membranes, transport properties of four gases (CO₂, H₂, N₂, and CH₄) are discussed. After characterization, the two best copolymers are selected in order to prepare tailor made blends by adding poly(ethylene glycol) (PEG). The best selected copolymer that contained 55 wt. % of 4000 g mol⁻¹ PEO produced a blend with high CO₂ permeability (∼190 barrer), which is twice the permeability of the pure copolymer. At the same time, an enhancement of CO₂/H₂ selectivity is observed (∼13). These results suggest that the morphology of PEO‐PBT can be well controlled by the addition of low‐molecular‐weight PEG, and consequently the gas transport properties can be tuned.     

A Hybrid Poly(ethylene oxide)/ Poly(vinylidene fluoride)/TiO2 Nanoparticle Solid‐State Redox Electrolyte for Dye‐Sensitized Nanocrystalline Solar Cells

High‐efficiency all‐solid‐state dye‐sensitized nanocrystalline solar cells have been fabricated using a poly(ethylene oxide)/poly(vinylidene fluoride) (PEO/PVDF)/TiO₂‐nanoparticle polymer redox electrolyte, which yields an overall energy‐conversion efficiency of about 4.8 % under irradiation by white light (65.2 mW cm^–2). The introduction of PVDF (which contains the highly electronegative element fluorine) and TiO₂ nanoparticles into the PEO electrolyte increases the ionic conductivity (by about two orders of magnitude) and effectively reduces the recombination rate at the interface of the TiO₂ and the solid‐state electrolyte, thus enhancing the performance of the solar cell.     

Surface Reconstruction Limited Conductivity in Block‐Copolymer Li Battery Electrolytes

Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block‐copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the electrode surface has an important effect on impedance measurements, despite its negligible extent compared to the bulk electrolyte. Using standard stainless steel blocking electrodes, the impedance of lithium salt‐doped poly(isoprene‐b‐styrene‐b‐ethylene oxide) (ISO) exhibits a marked decrease upon thermal processing of the electrolyte. In contrast, covering the electrode surface with a low molecular weight poly(ethylene oxide) (PEO) brush results in higher and more reproducible conductivity values, which are insensitive to the thermal history of the device. A qualitative model of this effect is based on the hypothesis that ISO surface reconstruction at the different electrode surfaces leads to a change in the electrostatic double layer, affecting electrochemical impedance spectroscopy measurements. As a main result, PEO‐brush modification of electrode surfaces is beneficial for the robust electrolyte performance of PEO‐containing block‐copolymers and may be crucial for their accurate characterization and use in Li‐ion batteries.     

Hierarchical Structuring in Block Copolymer Nanocomposites through Two Phase‐Separation Processes Operating on Different Time Scales

Tailoring the size and surface chemistry of nanoparticles allows one to control their position in a block copolymer, but this is usually limited to one‐dimensional distribution across domains. Here, the hierarchical assembly of poly(ethylene oxide)‐stabilized gold nanoparticles (Au‐PEO) into hexagonally packed clusters inside mesostructured ultrathin films of polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) is described. A close examination of the structural evolution at different nanoparticle filling fractions and PEO ligand molecular weights suggests that the mechanism leading to this structure‐within‐structure is the existence of two phase separation processes operating on different time scales. The length of the PEO ligand is shown to influence not only the interparticle distances but also the phase separation processes. These conclusions are supported by novel mesoscopic simulations, which provide additional insight into the kinetic and thermodynamic factors that are responsible for this behavior.     

Highly Flexible Organic Nanofiber Phototransistors Fabricated on a Textile Composite for Wearable Photosensors

Highly flexible organic nanofiber phototransistors are fabricated on a highly flexible poly(ethylene terephthalate) (PET) textile/poly(dimethylsiloxane) (PDMS) composite substrate. Organic nanofibers are obtained by electrospinning, using a mixture of poly(3,3^″′‐didodecylquarterthiophene) (PQT‐12) and poly(ethylene oxide) (PEO) as the semiconducting polymer and processing aid, respectively. PDMS is used as both a buffer layer for flattening the PET textile and a dielectric layer in the bottom‐gate bottom‐contact device configuration. PQT‐12:PEO nanofibers can be well‐aligned on the textile composite substrate by electrospinning onto a rotating drum collector. The nanofiber phototransistors fabricated on the PET/PDMS textile composite substrate show highly stable device performance (on‐current retention up to 82.3 (±6.7)%) under extreme bending conditions, with a bending radius down to 0.75 mm and repeated tests over 1000 cycles, while those prepared on film‐type PET and PDMS‐only substrates exhibit much poorer performances. The photoresponsive behaviors of PQT‐12:PEO nanofiber phototransistors have been investigated under light irradiation with different wavelengths. The maximum photoresponsivity, photocurrent/dark‐current ratio, and external quantum efficiency under blue light illumination were 930 mA W^?1, 2.76, and 246%, respectively. Furthermore, highly flexible 10 × 10 photosensor arrays have been fabricated which are able to detect incident photonic signals with high resolution. The flexible photosensors described herein have high potential for applications as wearable photosensors.     

Microscopic Morphology of Polyfluorene–Poly(ethylene oxide) Block Copolymers: Influence of the Block Ratio

In this paper, we describe the synthesis and characterization of poly(9,9′‐dioctylfluorene)–poly(ethylene oxide) (PF‐PEO) block copolymers with different block ratio and molecular architectures (diblock or triblock copolymers). Tapping‐mode atomic force microscopy is used to investigate the relationship between the molecular structure and the microscopic morphology of thin deposits. Copolymers with a low average volume ratio of PEO (f_EO from 0.1 to 0.3) exhibit a well‐defined organization into nanoribbons. A model of chain packing is proposed; these structures arise from the interplay of π–π interactions between conjugated PF segments and the interactions of PEO with the mica substrate surface. For copolymers with higher average volume ratio of PEO (f_EO > 0.4), the organized structures disappear and lead to untextured aggregates, probably because long‐range, regular π–π stacking of the segments can no longer take place. We also observe that the nature of the solvent from which deposits are grown and the substrate polarity have a strong impact on the microscopic morphology.     

Ultrafast Responsive Non‐Volatile Flash Photomemory via Spatially Addressable Perovskite/Block Copolymer Composite Film

The exotic photophysical properties of organic–inorganic hybrid perovskite with long exciton lifetimes and small binding energy have appeared as promising front‐runners for next‐generation non‐volatile flash photomemory. However, the long photo‐programming time of photomemory limits its application on light‐fidelity (Li‐Fi), which requires high storage capacity and short programming times. Herein, the spatially addressable perovskite in polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO)/perovskite composite film as an photoactive floating gate is demonstrated to elucidate the effect of morphology on the photo‐responsive characteristics of photomemory. The chelation between lead ion and PEO segment promotes the anti‐solvent functionalities of the perovskite/PS‐b‐PEO composite film, thus allowing the solution‐processable poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) to act as the active channel. Through manipulating the interfacial area between perovskite and P3HT, fast photo‐induced charge transfer rate of 0.056 ns^?1, high charge transfer efficiency of 89%, ON/OFF current ratio of 10⁴, and extremely low programming time of 5 ms can be achieved. This solution‐processable and fast photo‐programmable non‐volatile flash photomemory can trigger the practical application on Li‐Fi.     

Block‐Copolymer‐Assisted One‐Pot Synthesis of Ordered Mesoporous WO3−x/Carbon Nanocomposites as High‐Rate‐Performance Electrodes for Pseudocapacitors

An ordered mesoporous tungsten‐oxide/carbon (denoted as m‐WO_3?x‐C‐s) nanocomposite is synthesized using a simple one‐pot method using polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) as a structure‐directing agent. The hydrophilic PEO block interacts with the carbon and tungsten precursors (resol polymer and WCl₆), and the PS block is converted to pores after heating at 700 °C under a nitrogen flow. The m‐WO_3?x‐C‐s nanocomposite has a high Brunauer–Emmett–Teller (BET) surface area and hexagonally ordered pores. Because of its mesoporous structure and high intrinsic density of tungsten oxide, this material exhibits a high average volumetric capacitance and gravimetric capacitance as a pseudocapacitor electrode. In comparison with reduced mesoporous tungsten oxide (denoted as m‐WO_3?x‐h), which is synthesized by a tedious hard template approach and further reduction in a H₂/N₂ atmosphere, m‐WO_3?x‐C‐s shows a high capacitance and enhanced rate performance, as confirmed by cyclic voltammetry, galvanostatic charge/discharge measurements, and electrochemical impedance spectroscopy. The good performance of m‐WO_3?x‐C‐s is attributed to the high surface area arising from the mesoporous structure, the large interconnected mesopores, and the low internal resistance from the well‐dispersed reduced tungsten oxide and amorphous carbon composite structure. Here, the amorphous carbon acts as an electrical pathway for effective pseudocapacitor behavior of WO_3‐x.     

Designing a New Generation of Proton‐Exchange Membranes Using Layer‐by‐Layer Deposition of Polyelectrolytes

All fuel cells utilizing the membrane‐electrode assembly have their ion‐conductive membrane sandwiched between bipolar plates. Unfortunately, applying conventional techniques to isolated polyelectrolyte membranes is challenging and difficult. A more practical alternative is to use the layer‐by‐layer assembly technique to fabricate a membrane‐electrode assembly that is technologically relatively simple, economic, and robust. The process presented here paves the way to fabricate ion‐conductive membranes tailored for optimum performance in terms of controlled thickness, structural morphology, and catalyst loading. Composite membranes are constructed through the layered assembly of ionically conductive multilayer thin films atop a porous polycarbonate membrane. Under ambient conditions, a fuel cell using a poly(ethylene oxide)/poly(acrylic acid) (PEO/PAA) composite membrane delivers a maximum power density of 16.5 mW cm^–2 at a relative humidity of 55 %, which is close to that of some commercial fuel cells operating under the same conditions. Further optimization of these systems may lead to new, ultrathin, flexible fuel cells for portable power and micropower applications.     

Synthesis of Amphiphilic Copolymers of Poly(ethylene oxide) and Poly(ϵ‐caprolactone) with Different Architectures,and Their Role in the Preparation of Stealthy Nanoparticles

Well‐defined copolymers of biocompatible poly(?‐caprolactone) (PCL) and poly(ethylene oxide) (PEO) are synthesized by two methods. Graft copolymers with a gradient structure are prepared by ring‐opening copolymerization of ?‐caprolactone (?CL) with a PEO macromonomer of the ?CL‐type. The ?CL polymerization is initiated by a PEO macroinitiator to prepare diblock copolymers. These amphiphilic copolymers are used as stabilizers for biodegradable poly(D,L ‐lactide) (PLA) nanoparticles prepared by a nanoprecipitation technique. The effect of the copolymer characteristic features (architecture, composition, and amount) on the nanoparticle formation and structure is investigated. The average size, size distribution, and stability of aqueous suspensions of the nanoparticles is measured by dynamic light scattering. For comparison, an amphiphilic random copolymer, poly(methyl methacrylate‐co‐methacrylic acid) (P(MMA‐co‐MA)), is synthesized. The stealthiness of the nanoparticles is analyzed in relation to the copolymer used as stabilizer. For this purpose, the activation of the complement system by nanoparticles is investigated in vitro using human serum. This activation is much less important whenever the nanoparticles are stabilized by a PEO‐containing copolymer rather than by the P(MMA‐co‐MA) amphiphile. The graft copolymers with a gradient structure and the diblock copolymers with similar macromolecular characteristics (molecular weight and hydrophilicity) are compared on the basis of their capacity to coat PLA nanoparticles and to make them stealthy.     

Organic–Inorganic Nanohybridization by Block Copolymer Thin Films

A simple route for fabricating highly ordered organic–inorganic hybrid nanostructures, using polystyrene‐block‐poly(ethylene oxide) diblock copolymer (PS‐b‐PEO) thin films coupled with sol–gel chemistry, is presented. Hexagonally packed arrays of titania nanodomains were generated by one‐step spin‐coating from solutions containing a titania precursor and PS‐b‐PEO, where the precursor was selectively incorporated into the PEO domain. The PS‐b‐PEO template was subsequently removed by UV treatment, leaving behind a highly dense array of hexagonally packed titania dots. The size of the dots, as well as the lattice spacing of the array, could be fine‐tuned by simply controlling the relative amount of sol–gel precursor to PS‐b‐PEO.     

Phase Segregation in Thin Films of Conjugated Polyrotaxane– Poly(ethylene oxide) Blends: A Scanning Force Microscopy Study

Scanning force microscopy (SFM) is used to study the surface morphology of spin‐coated thin films of the ion‐transport polymer poly(ethylene oxide) (PEO) blended with either cyclodextrin (CD)‐threaded conjugated polyrotaxanes based on poly(4,4′‐diphenylene‐vinylene) (PDV), β‐CD–PDV, or their uninsulated PDV analogues. Both the polyrotaxanes and their blends with PEO are of interest as active materials in light‐emitting devices. The SFM analysis of the blended films supported on mica and on indium tin oxide (ITO) reveals in both cases a morphology that reflects the substrate topography on the (sub‐)micrometer scale and is characterized by an absence of the surface structure that is usually associated with phase segregation. This observation confirms a good miscibility of the two hydrophilic components, when deposited by using spin‐coating, as suggested by the luminescence data on devices and thin films. Clear evidence of phase segregation is instead found when blending PEO with a new organic‐soluble conjugated polymer such as a silylated poly(fluorene)‐alt‐poly(para‐phenylene) based polyrotaxane (THS–β‐CD–PF–PPP). The results obtained are relevant to the understanding of the factors influencing the interfacial and the intermolecular interactions with a view to optimizing the performance of light‐emitting diodes, and light‐emitting electrochemical cells based on supramolecularly engineered organic polymers.     

Solid‐State NMR Investigations of the Unusual Effects Resulting from the Nanoconfinement of Water within Amphiphilic Crosslinked Polymer Networks

Two types of solid‐state ¹⁹F NMR spectroscopy experiments are used to characterize phase‐separated hyperbranched fluoropolymer–poly(ethylene glycol) (HBFP–PEG) crosslinked networks. Mobile (soft) domains are detected in the HBFP phase by a rotor‐synchronized Hahn echo under magic‐angle spinning conditions, and rigid (hard) domains by a solid echo with no magic‐angle spinning. The mobility of chains is detected in the PEG phase by ¹H → ¹³C cross‐polarization transfers with ¹H spin‐lock filters with and without magic‐angle spinning. The interface between HBFP and PEG phases is detected by a third experiment, which utilized a ¹⁹F → ¹H–(spin diffusion)–¹H → ¹³C double transfer with ¹³C solid‐echo detection. The results of these experiments show that composition‐dependent PEG inclusions in the HBFP glass rigidify on hydration, consistent with an increase in macroscopic tensile strength.     

pH‐Responsive Flower‐Type Micelles Formed by a Biotinylated Poly(2‐vinylpyridine)‐block‐poly(ethylene oxide)‐block‐poly(ε‐caprolactone) Triblock Copolymer

In the present work, a method is proposed to assemble pH‐responsive, flower‐like micelles that can expose a targeting unit at their periphery upon a decrease in pH. The micelles are composed of a novel biotinylated triblock copolymer of poly(εε‐caprolactone)‐block‐poly(ethylene oxide)‐block‐poly(2‐vinylpyridine) (PCL‐b‐PEO‐b‐P2VP) and the non‐biotinylated analogue. The block copolymers are synthesized by sequential anionic and ring‐opening polymerization. The pH‐dependent micellization behaviour in aqueous solution of the triblock copolymers developed is studied using dynamic light scattering, zeta potential, transmission electron microscopy (TEM), and fluorimetric measurements. The shielding of the biotin at neutral pH and their availability at the micelle surface upon protonation is established by TEM and surface plasmon resonance with avidin and streptavidin‐coated gold surfaces. The preliminary stealthy behavior of these pH‐responsive micelles is examined using the complement activation (CH50) test.     

Proton Transport from Dendritic Helical‐Pore‐Incorporated Polymersomes

The ability to add synthetic channels to polymersome (polymer vesicle) membranes could lead to novel membrane composites with unique selectivity and permeability. Proton transport through two different synthetic pores, self‐assembled from either a dendritic dipeptide, (6Nf‐3,4‐3,5)12G2‐CH₂‐Boc‐L‐Tyr‐L‐Ala‐OMe, or a dendritic ester, (R)‐4Bp‐3,4‐dm8G1‐COOMe, incorporated into polymersome membranes are studied. Polymersomes provide an excellent platform for studying such transport processes due to their robustness and mechanical and chemical stability compared to liposomes. It is found that the incorporated dendritic dipeptide and dendritic ester assemble into stable helical pores in the poly(ethylene oxide)‐polybutadiene (PEO‐PBD) polymersomes but not in the poly(2‐methyloxazoline)‐poly(dimethylsiloxane)‐poly(2‐methyl oxazoline) (PMOX‐PDMS‐PMOX) polymersomes. The incorporation is confirmed by circular dichroism (CD), changes in purely synthetic mechanical strength (e.g., areal expansion modulus) as assessed by micropipette aspiration, and cryo‐TEM. In addition to the structural analyses, a transport measurement shows the incorporated dendritic helical pores allow facile transport of protons across the polymersome membranes after up to one month of storage. This integration of synthetic porous channels with polymersome substrates could provide a valuable tool for studying active transport processes in a composite membrane. These composites will ultimately expand the family of biologically inspired porous‐membrane mimics.     

Highly Extensible Bio‐Nanocomposite Films with Direction‐Dependent Properties

The structure and mechanical properties of bio‐nanocomposite films made from poly(ethylene oxide) (PEO) that is physically cross‐linked with silicate nanoparticles, Laponite, are investigated. Direction‐dependent mechanical properties of the films are presented, and the effect of shear orientation during sample preparation on tensile strength and elongation is assessed. Repeated mechanical deformation results in highly extensible materials with preferred orientation and structuring at the nano‐ and micrometer scales. Additionally, in vitro biocompatibility data are reported, and NIH 3T3 fibroblasts are observed to readily adhere and proliferate on silicate cross‐linked PEO while maintaining high cell viability.     

Nanocomposite Electrolytes with Fumed Silica and Hectorite Clay Networks: Passive versus Active Fillers

The use of nanocomposites constitutes a versatile and robust approach in the development of novel electrolytes with tailored electrochemical and mechanical characteristics. In this study, we examine the morphology, rheology, and ion‐transport properties of two types of nanocomposite electrolyte gels, one consisting of branched silica nanoparticles and the other composed of hectorite clay. In the first system with hydrophobic (fumed) silica, oligomers of poly(ethylene oxide) (PEO), and lithium salt, the silica acts as a passive filler and does not participate in ion transport. The electrochemical properties are controlled by the salt–PEO electrolyte, allowing for ionic conductivities greater than 10^–3 S cm^–1 at ambient temperature. At sufficiently high concentrations, the silica forms an elastic gel possessing a large open network structure that provides for unimpeded ion mobility. In the second system composed of lithium‐exchanged hectorite filler, the nanoscale platelets serve as the anion. This active filler yields ionic conductivities in excess of 10^–4 S cm^–1 and lithium transference numbers approaching unity. Similar to fumed silica, the hectorite clay also forms an elastic gel network. However, the morphologies of the two systems are distinctively different both in terms of network structure and characteristic length scale. These morphological differences manifest themselves in different rheological responses with regard to gel modulus and yield stress.