Magnetic Imaging of Cyanide‐Bridged Co‐ordination Nanoparticles Grafted on FIB‐Patterned Si Substrates

Prussian blue CsNiCr nanoparticles are used to decorate selected portions of a Si substrate. For successful grafting to take place, the Si surface needs first to be chemically functionalized. Low‐dose focused ion beam patterning on uniformly functionalized surfaces selects those portions that will not participate in the grafting process. Step‐by‐step control is assured by atomic force and high‐resolution scanning electron microscopy, revealing a submonolayer distribution of the grafted nanoparticles. By novel scanning Hall‐probe microscopy, an in‐depth investigation of the magnetic response of the nanoparticles to varying temperature and applied magnetic field is provided. The magnetic images acquired suggest that low‐temperature canted ferromagnetism is found in the grafted nanoparticles, similar to what is observed in the equivalent bulk material.     

Biomechanical Strain Exacerbates Inflammation on a Progeria‐on‐a‐Chip Model

Organ‐on‐a‐chip platforms seek to recapitulate the complex microenvironment of human organs using miniaturized microfluidic devices. Besides modeling healthy organs, these devices have been used to model diseases, yielding new insights into pathophysiology. Hutchinson‐Gilford progeria syndrome (HGPS) is a premature aging disease showing accelerated vascular aging, leading to the death of patients due to cardiovascular diseases. HGPS targets primarily vascular cells, which reside in mechanically active tissues. Here, a progeria‐on‐a‐chip model is developed and the effects of biomechanical strain are examined in the context of vascular aging and disease. Physiological strain induces a contractile phenotype in primary smooth muscle cells (SMCs), while a pathological strain induces a hypertensive phenotype similar to that of angiotensin II treatment. Interestingly, SMCs derived from human induced pluripotent stem cells of HGPS donors (HGPS iPS‐SMCs), but not from healthy donors, show an exacerbated inflammatory response to strain. In particular, increased levels of inflammation markers as well as DNA damage are observed. Pharmacological intervention reverses the strain‐induced damage by shifting gene expression profile away from inflammation. The progeria‐on‐a‐chip is a relevant platform to study biomechanics in vascular biology, particularly in the setting of vascular disease and aging, while simultaneously facilitating the discovery of new drugs and/or therapeutic targets.     

Two‐Dimensional Self‐Organization of an Ordered Au Silicide Nanowire Network on a Si(110)‐16 × 2 Surface

A well‐ordered two‐dimensional (2D) network consisting of two crossed Au silicide nanowire (NW) arrays is self‐organized on a Si(110)‐16 × 2 surface by the direct‐current heating of ≈1.5 monolayers of Au on the surface at 1100 K. Such a highly regular crossbar nanomesh exhibits both a perfect long‐range spatial order and a high integration density over a mesoscopic area, and these two self‐ordering crossed arrays of parallel‐aligned NWs have distinctly different sizes and conductivities. NWs are fabricated with widths and pitches as small as ≈2 and ≈5 nm, respectively. The difference in the conductivities of two crossed‐NW arrays opens up the possibility for their utilization in nanodevices of crossbar architecture. Scanning tunneling microscopy/spectroscopy studies show that the 2D self‐organization of this perfect Au silicide nanomesh can be achieved through two different directional electromigrations of Au silicide NWs along different orientations of two nonorthogonal 16 × 2 domains, which are driven by the electrical field of direct‐current heating. Prospects for this Au silicide nanomesh are also discussed.     

Graphene‐Bonded and ‐Encapsulated Si Nanoparticles for Lithium Ion Battery Anodes

Silicon (Si) has been considered a very promising anode material for lithium ion batteries due to its high theoretical capacity. However, high‐capacity Si nanoparticles usually suffer from low electronic conductivity, large volume change, and severe aggregation problems during lithiation and delithiation. In this paper, a unique nanostructured anode with Si nanoparticles bonded and wrapped by graphene is synthesized by a one‐step aerosol spraying of surface‐modified Si nanoparticles and graphene oxide suspension. The functional groups on the surface of Si nanoparticles (50–100 nm) not only react with graphene oxide and bind Si nanoparticles to the graphene oxide shell, but also prevent Si nanoparticles from aggregation, thus contributing to a uniform Si suspension. A homogeneous graphene‐encapsulated Si nanoparticle morphology forms during the aerosol spraying process. The open‐ended graphene shell with defects allows fast electrochemical lithiation/delithiation, and the void space inside the graphene shell accompanied by its strong mechanical strength can effectively accommodate the volume expansion of Si upon lithiation. The graphene shell provides good electronic conductivity for Si nanoparticles and prevents them from aggregating during charge/discharge cycles. The functionalized Si encapsulated by graphene sample exhibits a capacity of 2250 mAh g^?1 (based on the total mass of graphene and Si) at 0.1C and 1000 mAh g^?1 at 10C, and retains 85% of its initial capacity even after 120 charge/discharge cycles. The exceptional performance of graphene‐encapsulated Si anodes combined with the scalable and one‐step aerosol synthesis technique makes this material very promising for lithium ion batteries.     

Ultrahigh Photocatalytic Rate at a Single‐Metal‐Atom‐Oxide

Metal oxides, as one of the mostly abundant and widely utilized materials, are extensively investigated and applied in environmental remediation and protection, and in energy conversion and storage. Most of these diverse applications are the result of a large diversity of the electronic states of metal oxides. Noticeably, however, many metal oxides present obstacles for applications in catalysis, mainly due to the lack of efficient active sites with desired electronic states. Here, the fabrication of single‐tungsten‐atom‐oxide (STAO) is demonstrated, in which the metal oxide's volume reaches its minimum as a unit cell. The catalytic mechanism in the STAO is determined by a new single‐site physics mechanism, named as quasi‐atom physics. The photogenerated electron transfer process is enabled by an electron in the spin‐up channel excited from the highest occupied molecular orbital to the lowest unoccupied molecular orbital +1 state, which can only occur in STAO with W⁵⁺. STAO results in a record‐high and stable sunlight photocatalytic degradation rate of 0.24 s^?1, which exceeds the rates of available photocatalysts by two orders of magnitude. The fabrication of STAO and its unique quasi‐atom photocatalytic mechanism lays new ground for achieving novel physical and chemical properties using single‐metal‐atom oxides (SMAO).     

A Droplet‐Based High‐Throughput SERS Platform on a Droplet‐Guiding‐Track‐Engraved Superhydrophobic Substrate

A novel droplet‐based surface‐enhanced Raman scattering (SERS) sensor for high‐throughput real‐time SERS monitoring is presented. The developed sensors are based on a droplet‐guiding‐track‐engraved superhydrophobic substrate covered with hierarchical SERS‐active Ag dendrites. The droplet‐guiding track with a droplet stopper is designed to manipulate the movement of a droplet on the superhydrophobic substrate. The superhydrophobic Ag dendritic substrates are fabricated through a galvanic displacement reaction and subsequent self‐assembled monolayer coating. The optimal galvanic reaction time to fabricate a SERS‐active Ag dendritic substrate for effective SERS detection is determined, with the optimized substrate exhibiting an enhancement factor of 6.3 × 10⁵. The height of the droplet stopper is optimized to control droplet motion, including moving and stopping. Based on the manipulation of individual droplets, the optimized droplet‐based real‐time SERS sensor shows high resistance to surface contaminants, and droplets containing rhodamine 6G, Nile blue A, and malachite green are successively controlled and detected without spectral interference. This noble droplet‐based SERS sensor reduces sample preparation time to a few seconds and increased detection rate to 0.5 µ L s^?1 through the simple operation mechanism of the sensor. Accordingly, our sensor enables high‐throughput real‐time molecular detection of various target analytes for real‐time chemical and biological monitoring.     

Spray‐Deposited Al‐Si (Osprey CE) Alloys and their Properties

Osprey Metals Ltd. has developed a new family of lightweight, low expansion aluminium‐silicon alloys to suit electronic applications, containing between 30 and 70 wt.% aluminium. They are produced using the Osprey spray deposition process, which achieves homogeneous and isotropic properties. Their advantageous physical characteristics, combining low thermal expansion, high thermal conductivity and low density are particularly suited for packaging electronic circuitry. These CE (controlled expansion) alloys are easy to machine to tight tolerances using standard machine tools and they can be electroplated with gold, silver or nickel finishes without difficulty. This paper focuses on the measurement of mechanical (flexural strength) and thermo‐mechanical properties (CTE, thermal diffusivity and specific heat) of these alloys, carried out in collaboration with AMTT. The property measurements were consistent with those measured previously elsewhere, apart from the CTE values, which deviated significantly and were at variance with values predicted from a rule of mixtures. This discrepancy was resolved in a short follow‐up series of measurements carried out under conditions corresponding more closely to temperature equilibrium.     

Efficient Sodium Storage in Rolled‐Up Amorphous Si Nanomembranes

Alloying‐type materials are promising anodes for high‐performance sodium‐ion batteries (SIBs) because of their high capacities and low Na‐ion insertion potentials. However, the typical candidates, such as P, Sn, Sb, and Pb, suffer from severe volume changes (≈293–487%) during the electrochemical reactions, leading to inferior cycling performances. Here, a high‐rate and ultrastable alloying‐type anode based on the rolled‐up amorphous Si nanomembranes is demonstrated. The rolled‐up amorphous Si nanomembranes show a very small volume change during the sodiation/desodiation processes and deliver an excellent rate capability and ultralong cycle life up to 2000 cycles with 85% capacity retention. The structural evolution and pseudocapacitance contribution are investigated by using the ex situ characterization techniques combined with kinetics analysis. Furthermore, the mechanism of efficient sodium‐ion storage in amorphous Si is kinetically analyzed through an illustrative atomic structure with dangling bonds, offering a new perspective on understanding the sodium storage behavior. These results suggest that nanostructured amorphous Si is a promising anode material for high‐performance SIBs.