Photosensitive antibacterial and cytotoxicity performances of a TiO2/carboxymethyl chitosan/poly(vinyl alcohol) nanocomposite hydrogel by in situ radiation construction

Nano‐TiO₂/carboxymethyl chitosan (CMCS)/poly(vinyl alcohol) (PVA) ternary nanocomposite hydrogels were prepared by freezing–thawing cycles and electron‐beam radiation with PVA, CMCS, and nano‐TiO₂ as raw materials. The presence of nano‐TiO₂ nanoparticles in the composite hydrogels was confirmed by thermogravimetry, Fourier transform infrared spectroscopy, and X‐ray powder diffraction. Field emission scanning electron microscopy images also illustrated that the TiO₂/CMCS/PVA hydrogel exhibited a porous and relatively regular three‐dimensional network structure; at the same time, there was the presence of embedded nano‐TiO₂ throughout the hydrogel matrix. In addition, the nano‐TiO₂/CMCS/PVA composite hydrogels displayed significant antibacterial activity with Escherichia coli and Staphylococcus aureus as bacterial models. The antibacterial activity was demonstrated by the antibacterial circle method, plate count method, and cell density method. Also, with the Alamar Blue assay, the cytotoxicity of the composite hydrogel materials to L929 cells was studied. The results suggest that these materials had no obvious cytotoxicity. Thus, we may have developed a novel, good biocompatibility hydrogel with inherent photosensitive antibacterial activity with great potential for applications in the fields of cosmetics, medical dressings, and environmental protection. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44150.     

Preparation and characterization by radiation of poly(vinyl alcohol) and poly(N‐vinylpyrrolidone) hydrogels containing aloe vera

In these studies, hydrogels for wound dressings were made from a mixture of aloe vera and poly(vinyl alcohol) (PVA)/poly(N‐vinylpyrrolidone) (PVP) by freezing and thawing, γ‐Ray irradiation, or a two‐step process of freezing and thawing and γ‐ray irradiation. We examined the physical properties, including gelation, water absorptivity, gel strength, and degree of water evaporation, to evaluate the applicability of these hydrogels for wound dressings. The PVA:PVP ratio was 6:4, the dry weight of aloe vera was in the range 0.4–1.2 wt %, and the solid concentration of the PVA/PVP/aloe vera solution was 15 wt %. We used γ radiation doses of 25, 35, and 50 kGy to expose mixtures of PVA/PVP/aloe vera to evaluate the effect of radiation dose on the physical properties of the hydrogels. Gel content and gel strength increased as the concentration of aloe vera in the PVA/PVP/aloe vera gels decreased and as radiation dose increased and the number of freeze–thaw cycles was increased. The swelling degree was inversely proportional to the gel content and gel strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1477–1485, 2003     

Preparation and properties of PVA/PVP hydrogels containing chitosan by radiation

Radiation can induce chemical reactions to modify polymers even when they are in the solid state or at a low temperature. Radiation crosslinking can be easily adjusted by controlling the radiation dose and is reproducible. The finished product contains no residuals of substances required to initiate the chemical crosslinking, which can restrict its application possibilities. In these studies, hydrogels for wound dressing were made from a mixture of chitosan and polyvinyl alcohol (PVA)/poly‐N‐vinylpyrrolidone (PVP) by freezing and thawing, gamma‐ray irradiation, or combined freezing and thawing and gamma‐ray irradiation. The physical properties of the hydrogel, such as gelation, water absorptivity, and gel strength, were examined to evaluate the usefulness of the hydrogels for wound dressing. The PVA/PVP composition was 60:40, PVA/PVP–chitosan ratio was in the range 9:1–7:3, and the concentration of, PVA/PVP–chitosan as a solid was 15 wt %. A mixture of PVA/PVP–chitosan was exposed to gamma irradiation doses of 25, 35, 50, 60 and 70 kGy to evaluate the effect of irradiation dose on the physical properties of hydrogels. Water‐soluble chitosan was used in these experiment. The physical properties of the hydrogels, such as gelation and gel strength, were higher when the combination of freezing and thawing and irradiation were used rather than just freezing and thawing. The PVA/PVP–chitosan composition and irradiation dose had a greater influence on swelling than gel content. Swelling percent increased as the composition of chitosan in PVA/PVP–chitosan increased. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1787–1794, 2002     

Enhancement of pervaporation performance of composite membranes through in situ generation of silver nanoparticles in poly(vinyl alcohol) matrix

Composite membranes were prepared from an aqueous solution of poly(vinyl alcohol) (PVA) and silver sulphate. The silver nanoparticles were generated in situ before crosslinking PVA matrix by reduction of silver ions using sodium borohydride. Physico‐chemical properties of the resulting composite membranes were studied using Fourier transform infrared spectroscopy (FTIR), UV–vis spectroscopy (UV–vis), thermogravimetric analysis (TGA), Wide‐angle X‐ray diffraction (WAXD), scanning electron microscopy (SEM), and universal testing machine (UTM). The UV–vis spectrum shows a single peak at 410 nm due to surface plasmon absorption of silver nanoparticles. This surely specified that silver nanoparticles are generated in PVA matrix. The membranes were under go pervaporation (PV) for separation of water from isopropanol at different temperatures. The results indicated that hydrophilicity and amorphous nature of the membranes were increased with increasing silver nanoparticles in PVA matrix. The swelling and separation performance of the membranes were studied. Both permeation flux and separation factor were increased with increasing silver nanoparticles in PVA matrix. The results showed that the membrane containing 2.5 mass% of Ag salt exhibited excellent PV performance. The values of total flux and flux of water are almost closed to each other, indicating that membranes could be effectively used to break the azeotropic point of water‐isopropanol. The long‐term test was performed at room temperature and ascertained that membranes were durable up to 30 days for the dehydration of IPA. On the basis of the estimate Arrhenius activation energy values, the efficiency of the membranes was discussed. The calculated ΔH_s values are negative for all the membranes, indicating that Longmuir's mode of sorption is predominant. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41248.     

Microstructural evaluation of poly(vinyl alcohol)‐based hydrogels obtained by freezing‐thawing technique: Thermal analysis and positron annihilation

In this work, semi‐interpenetrating polymer network (s‐IPN) hydrogels of poly(vinyl alcohol) (PVA) with different contents of water‐soluble sulfonated polyester (PES) were obtained by freezing and thawing cycles. The samples were characterized by positron annihilation lifetime spectroscopy (PALS) and differential scanning calorimetry (DSC). PALS was used to determine the average free volume radius through lifetime measures of the ortho‐positronium (o‐Ps). Degree of crystallinity of the PVA/PES hydrogels was evaluated using the melting enthalpy ratios between the samples and the 100% crystalline PVA. The results show that an increase on the PES content leads to a decrease on the degree of crystallinity of the samples, reflecting an increase on the lifetimes (τ₃). These structural changes could be interpreted as a result of different polymer‐polymer interactions between PVA and PES in the hydrogels. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Rheological investigation of poly(vinyl alcohol)/poly(N-vinyl pyrrolidone) mixtures in aqueous solution and hydrogel state

Rheological behavior of poly(vinyl alcohol) (PVA) and poly(N-vinyl pyrrolidone) (PVP) mixtures in aqueous solutions and hydrogel state was investigated. The complex dependence of the viscosity on PVA/PVP mixture composition could be attributed to cumulative effects of electrostatic interactions, hydrogen bonding or association phenomena. Physical hydrogels were prepared by freezing/thawing method and their viscoelastic properties were followed as a function of number of cryogenic cycles and aging time at 37 °C. From swelling experiments, it was observed that the diffusion of water molecules into the hydrogel pores is Fickian (for low number of cryogenic cycles) and it becomes pseudo-Fickian as the sample is submitted to more than 10 freezing/thawing cycles. PVA/PVP hydrogels obtained by physical interactions present a high degree of tailorability and they are suitable candidates for biomedical applications.     

Preparation and characterization of PVA/PVP/glycerin/antibacterial agent hydrogels using <Emphasis Type="Italic">γ</Emphasis>-irradiation followed by freeze-thawing

Hydrogels for wound dressings from a mixture of poly(vinyl alcohol) (PVA), poly(N-vinylpyrrolidone) (PVP), glycerin and an antibacterial agent were obtained by a γ-irradiation combined with freeze-thawing. The physical properties such as the gelation and swelling degree of the hydrogels were examined. When the PVP/PVA ratio was 6: 4 (wt%) and prepared by combined irradiation and freeze-thawing, it showed an excellent swelling capacity (>1,200%). The antibacterial effect of the hydrogels containing the antibacterial agents was observed to be effective as the concentration of antibacterial agents increased. The results demonstrated that hydrogel in a proper blending ratio could be used as a wound dressing that can accelerate wound healing with an antibacterial effect.     

Formation of silver nanoparticles created in situ in an amphiphilic block copolymer film

In this work, silver nanoparticles were synthesized with an amphiphilic diblock copolymer, polystyrene‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PS‐b‐PVP), as a template film. First, microphase‐separated amphiphilic PS‐b‐PVP (70 : 30 wt %) was synthesized through atom transfer radical polymerization. The self‐assembled block copolymer film was used to template the growth of silver nanoparticles by the introduction of a silver trifluoromethanesulfonate precursor and an ultraviolet irradiation process. The in situ formation of silver nanoparticles with an average size of 4–6 nm within the block copolymer template film was confirmed with transmission electron microscopy, ultraviolet–visible spectroscopy, and wide‐angle X‐ray scattering. Fourier transform infrared spectroscopy also demonstrated the selective incorporation and in situ formation of silver nanoparticles within the hydrophilic poly(1‐vinyl‐2‐pyrrolidone) domains, which were mostly due to the stronger interaction strength of the silver with the carbonyl oxygens of poly(1‐vinyl‐2‐pyrrolidone) in the block copolymer. This work provides a simple route for the in situ synthesis of silver nanoparticles within a polymer film. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Radiation synthesis and characterization of poly(vinyl alcohol)/poly(N-vinyl-2-pyrrolidone) based hydrogels containing silver nanoparticles

A series of PVA/PVP based hydrogels at different compositions were prepared by gamma irradiation. The gel fraction degree of swelling were investigated. Highly stable and uniformly distributed silver nanoparticles have been obtained onto hydrogel networks. The morphology and structure of (PVA/PVP) hydrogel and dispersion of the silver nanoparticles in the polymeric matrix were examined by scanning electron microscopy (SEM) and infrared spectroscopy (FT-IR), respectively. The formation of silver nanoparticles has been confirmed by ultraviolet visible (UV–vis) spectroscopy. A strong characteristic absorption peak was found to be around 420 nm for the silver nanoparticles in the hydrogel nanocomposite. The X-ray diffraction pattern confirmed the formation of silver nanoparticles with average particle size of 12 nm. The diameter distribution of silver nanoparticles was determined by dynamic light scattering DLS. Transmission electron microscope (TEM) showed almost spherical and uniform distribution of silver nanoparticles through the hydrogel network and the mean size of silver nanoparticles ranging is 23 nm. The good swelling properties and antibacterial of PVA/PVP-Ag hydrogel suggest that it can be a good candidate as wound dressing.     

Preparation and characterization of dual responsive sodium alginate‐g‐poly(vinyl alcohol) hydrogel

Poly(vinyl alcohol) (PVA) was chosen as a controllable gelator to prepare sodium alginate (SA)‐based physically cross‐linked dual‐responsive hydrogel by three steps. First, polyvinyl acetate (PVAc) was grafted onto SA via radical copolymerization. Then, the copolymer was subsequently converted into SA‐g‐poly(vinyl alcohol) (SAPVA) by alcoholysis reaction. PVA content of SAPVA was tailored by controlling the graft percentage of PVAc, i.e. through varying the amount of vinyl acetate during copolymerization. Finally, SAPVA hydrogels were formed by freezing‐thawing cycles. The structure of the graft copolymers was verified with FTIR spectroscopy. X‐ray diffraction analysis results revealed that the crystallinity of SAPVA hydrogels depended on the PVA content of SAPVA. The swelling test showed that SAPVA hydrogels were pH‐responsive, and the swelling was reversible. SAPVA hydrogels also behaved electric‐responsive. In addition, the pH‐sensitivity of SAPVA hydrogels was able to be controlled with the composition of the hydrogels. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of poly(vinyl alcohol) cryogel‐silver nanocomposites and evaluation of blood compatibility,cytotoxicity, and antimicrobial behaviors

In this investigation, cryogels composed of poly(vinyl alcohol) (PVA) were prepared by repeated freeze‐thaw method. The prepared cryogels served as templates for producing highly stable and uniformly distributed silver nanoparticles via in situ reduction of silver nitrate (AgNO₃) using alkaline formaldehyde solution as reducing agent. The structure of the PVA/Ag cryogel nanocomposites was characterized by a Fourier transform infrared and Raman spectroscopy. The morphologies of pure PVA cryogels and PVA/Ag nanocomposites were observed by a scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The SEM analysis suggested that cryogels show a well defined porous morphology whereas TEM micrographs revealed the presence of nearly spherical and well separated Ag nanoparticles with diameter about 100 nm. XRD results showed all relevant Bragg's reflections for crystal structure of silver nanoparticles. The amount of silver in cryogel nanocomposites and thermal stability were determined by inductively coupled plasma atomic emission spectrometry (ICP‐AES) and thermogravimetric analysis measurements. Mechanical properties of nanocomposites were observed in terms of tensile strength. The antibacterial studies of the synthesized nanosilver containing cryogels showed good antibacterial activity against both gram‐negative and gram‐positive bacteria. The prepared PVA/Ag nanocomposites were also investigated for swelling and deswelling behaviors. The results reveal that both the swelling and deswelling process depends on the chemical composition of the cryogel silver nanocomposites, number of freeze‐Thaw cycles and pH and temperature of the swelling medium. The biocompatibility of the prepared nanocomposites was judged by in vitro methods of percent hemolysis and protein (BSA) adsorption. POLYM. COMPOS., 36:1983–1997, 2015. © 2014 Society of Plastics Engineer     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Characterization of associating hydrogels of poly(vinyl alcohol) and poly(vinyl pyrrolidone)

In this study, hydrogels were prepared from blends of poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP). The miscibility of the polymers was confirmed with differential scanning calorimetry with the appearance of a single glass‐transition temperature. Additionally, a negative Flory–Huggins interaction parameter further verified the interaction between PVA and PVP. We evaluated the stability of the hydrogels by swelling the gels in phosphate‐buffered saline solutions at pH 7.4. With attenuated total reflectance‐Fourier transform infrared spectroscopy, it was determined that, during swelling, PVP dissolved out of the gel over time and the equilibrium gel content of PVP was nearly identical in all of the samples investigated. After the dissolution of PVP, the equilibrium water content of the gels ranged from 64 to 76 wt %. Additionally, rubber elasticity studies were performed to elucidate information about the physically crosslinked network structure. As determined from rubber elasticity experiments, the mesh size of the physically crosslinked hydrogels ranged from 90 to 230 Å. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of antibacterial temperature‐sensitive silver‐nanocomposite hydrogels from N‐isopropylacrylamide with green tea

This article reports the temperature‐sensitive, green tea (GT)‐based silver‐nanocomposite hydrogels for bacterial growth inactivation. The temperature‐sensitive hydrogels were prepared via free‐radical polymerization using temperature‐sensitive N‐isopropylacrylamide (NIPAM) monomer with GT as the hydrogel matrix. The nanocomposite hydrogels were encapsulated with silver ions via swelling method, which was later reduced to silver nanoparticles using Azadirachta indica leaf extract. The temperature‐sensitive silver nanocomposite hydrogels were analyzed by using Fourier transforms infrared, UV–visible spectroscopy, differential scanning calorimetry–thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The prepared hydrogels exhibited higher phase volume transition temperature than the NIPAM. The inhibition zone study of the inactivation of bacteria on the developed hydrogels was carried out against Gram negative (Escherichia coli) and Gram positive (Staphylococcus aureus), which revealed that the prepared hydrogels are helpful for the inactivation of these bacteria due to the high stabilization of antibacterial properties of the silver nanoparticles. The developed hydrogels are promising for biomedical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45739.     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

Structural and morphological study of gamma‐irradiation synthesized silver nanoparticles

Silver nanostructured particles with controlled size, shape, and morphology were achieved by gamma irradiation of aqueous solution containing AgNO_3, ploy (vinyl pyrrolidone), (PVP) or mixture of PVP and ploy (vinyl alcohol), (PVA). The reaction condition parameters such as solvent content, polymer type and irradiation dose were investigated. The physico‐chemical properties and morphological structures of the as‐prepared sliver nanostructures were characterized using UV/VIS spectroscopy, TEM, XRD, and Fourier transform infrared spectroscopy (FTIR) spectroscopy. Hexagonal and nanorods structures of sliver nanoparticles having single surface plasmon resonance peak and triangular (nanoprism) nanoparticles having different surface plasmon resonance peak were obtained. The XRD patterns of the as‐prepared silver nanostructure show four diffraction peaks at 2θ of 38.4°, 44.5°, 64.6°, and 77.6° of the face‐centered cubic structure silver nanoparticles. FTIR measurements indicated that the sliver nanoparticles were coordinated through the functional groups of PVA and/or PVP. POLYM. COMPOS., 38:2687–2694, 2017. © 2015 Society of Plastics Engineers     

Electrostatic immobilization of cetylpyridinium chloride to poly(vinyl alcohol) hydrogels for the simple fabrication of wound dressings with the suppressed release of antibacterial agents

Polymeric systems for antibacterial wound dressings require chemical reactions or syntheses for attaching or incorporating antibacterial moieties into polymer backbones. However, these materials often fail to satisfy the basic requirements, such as easy and inexpensive synthesis. We speculated that a positively charged organic antibacterial agent would be attracted to the polar groups of poly(vinyl alcohol) (PVA) hydrogels and would show suppressed release. PVA hydrogels containing cetylpyridinium chloride (CPC) were prepared by γ irradiation. CPC was barely released from the hydrogels, probably because of electrostatic interactions, and was stable upon γ irradiation. The suppressed release of CPC conferred antibacterial activity against Escherichia coli to the surface of the hydrogels, whereas no inhibition zone was observed around the hydrogels. The CPC‐containing PVA hydrogels were easy to prepare and contained known and safe materials. The simplicity and safety of this procedure for achieving the suppressed release of antibacterial agents were advantages of these CPC‐containing PVA hydrogels. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40456.     

Performance and characterization of irradiated poly(vinyl alcohol)/polyvinylpyrrolidone composite hydrogels used as cartilages replacement

In this article, hydrogels were prepared by compounding polyvinylpyrrolidone (PVP) with poly(vinyl alcohol) (PVA), which is used as artificial cartilages, by means of repeating freezing and thawing and irradiation, for improving their mechanical and surface lubricative properties. The structures and properties, including gel content, crystallized degree, elastic modulus, and frictional coefficients of the compound hydrogels with different PVP contents and irradiative conditions, were examined and compared. The existence of PVP macromolecules interfered with the crystallization of PVA hydrogels resulted in the decrease of gel contents and elastic modulus, as well as the unstable external frictional coefficient in water. After irradiation treatment, these performances increased with irradiation intensity in lower dose ranges. The solubility and exudation of PVP in water were prevented and reduced because of the chemical crosslink of PVA and PVP, and the lubricative properties of PVA/PVP hydrogels in water were improved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Carboxymethyl cellulose reinforced poly(vinyl alcohol) with trimethylol melamine as a chemical crosslinker

In this investigation, carboxymethyl cellulose (CMC)‐reinforced poly(vinyl alcohol) (PVA) were prepared with trimethylol melamine as a chemical crosslinker. The structure and property of hydrogels were measured by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), texture analysis, and rheometry. The FTIR spectra demonstrated that the etherification reaction successfully occurred in the PVA–CMC hydrogels, and the SEM figures exhibited the homogeneous porous structure of the CMC–PVA hydrogels. The compression strength of the PVA–CMC hydrogels was 15 times higher than that of the PVA hydrogels. Moreover, the PVA–CMC hydrogels exhibited a higher storage modulus than that of the PVA hydrogels; this illustrated better elasticity for the PVA–CMC hydrogels. As a result, CMC‐modified PVA hydrogels with high mechanical behavior will broaden the potential applications of hydrogels, such as in wound dressings, facial masks, and skin‐protection layers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44590.     

Breathing‐in/breathing‐out approach to preparing nanosilver‐loaded hydrogels: Highly efficient antibacterial nanocomposites

The key objective of developing novel materials for hygienic living conditions is to lower the risk of transmitting diseases and biofouling. To this end, a number of silver–hydrogel nanocomposite systems are under development. In this study, we attempted a unique strategy to prepare silver‐nanoparticle‐loaded poly(acrylamide‐co‐N‐vinyl‐2‐pyrolidone) hydrogel composites. To load nanosilver particles into such a nonionic hydrogel, a novel breathing‐in/breathing‐out (BI–BO) approach was employed. As the number of BI–BO cycles increased, the amount of the silver nanoparticles loaded into these hydrogels also increased. This behavior was obvious and was confirmed by ultraviolet–visible spectroscopy and thermal analysis. Furthermore, the hydrogel–silver‐nanoparticle composites were confirmed with Fourier transform infrared spectroscopy and transmission electron microscopy studies. Antibacterial studies of these hydrogel–silver nanocomposites showed excellent results against Escherichia coli. The antibacterial activity increased with the number of BI–BO cycles, and samples that underwent three BI–BO cycles showed optimal bactericidal activity. The degree of crosslinking and the silver content had a great influence on the antibacterial efficacy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009